Which are methods and FM for Catsdb for BAPI
which are methods and FM for Catsdb for BAPI
Thank you,
points will be rewarded
Hi Jagrut,
BIW_CATS_CUSTOMER_EXIT
BIW_CHECK_CATS_DATA
BIW_CHECK_CATS_DATA2
BIW_DELTA_CHECK_SELOPT
BIW_DELTA_CHECK_SELOPT2
CATS_APPROVAL0
CATS_BIW_DELTA
CATS_BIW_TIMESTAMP_DELTA
CATS_BUILD_CATSD
CATS_CHECK_CONSISTENCY_AT_SAVE
CATS_DISPLAY_ALV_LIST
CATS_DISPLAY_TARGET_DOCUMENTS
CATS_DISPLAY_TARGET_DOCUMENTS0
CATS_READ_ARCHIVED_DATA
CATS_READ_INTERFACE_ACCOUNTING
CATS_READ_INTERFACE_LOGISTICS
CATS_READ_TIMESHEET_DATA
CATS_SAVE_INTERFACE
CATS_SHOW_LIST
CATS_TRANSFORM_FREE_RECORDS
EXIT_SAPLTSBW_001
READ_INTERFACE_CPR
Reward if useful!
Similar Messages
-
Suppliers which are active and not being involved for a long time
Hi All,
Is there any way we can find suppliers which are active but not being used for a long time (for a specific duration) . i.e being involved in no open POs or no invoices processed or no payments made.
Please advice.
ThanksHi Abhi,
I have created some queries for the same. COuld you help me if I am going in the rite direction.
I have created a query to find the suppliers which are not being used in the POs for the past one year by using the below query: But for invoices and payments to be included, I am finding it a bit difficult....need help..............
--FINAL QUERY
SELECT vendor_id, vendor_name, creation_date, last_update_date
FROM po_vendors v
WHERE v.end_date_active IS NULL
AND v.enabled_flag = 'Y'
AND NOT EXISTS (
SELECT 1
FROM po_headers_all h
WHERE h.vendor_id = v.vendor_id
AND h.creation_date(+) BETWEEN (SYSDATE - 365) AND (SYSDATE))
ORDER BY vendor_id DESC
Is it possible to send me the program so that it would be helpful for me to use it.
email: [email protected]
Help Greatly appreciated.
Thanks
Aman -
Satellite A100-153: What are verical and horizontal refresh rates for my display
How can I found out what are verical and horizontal refresh rates for my display?
Hi
Do you mean the vertical and horizontal display resolution???
Anyway all informations should be listed in the user manual.
I dont know exactly what appendix is it but it must be placed somewhere at the end of the user manual.
Such infos are listed also in my user manual which was delivered and preinstalled on my Satellite notebook. -
Which are the highly recommended JMS brokers for live deployment?
Which are most widely deployed JMS messaging servers (brokers) in live applications?
Which are the most recommended JMS servers for a new deployment?
Any tips on these will be very helpful.function(){return A.apply(null,[this].concat($A(arguments)))}
I have my dev server - I leave this on 512MB and that's fine for
most of the stuff I do. We generally up this to a gig on our live
servers (which only run 3-4 small sites), and historically we've not
gone above this on our Shared servers (which host anywhere up to 400
sites) because of the 32-bit limit.
However, now we're running CF9 on 64-bit Server 2008, we've obviously got a lot more RAM available. The obvious choice is to ramp it up high, but I've also been heard that causes issues of its own - the Java GC then has far more work to do when it's called and as the memory fills it's harder to get a contiguous block of RAM, so performance can suffer.
Leave the memory setting at the default value, until testing requires you to do otherwise, or your sites unravel some unforeseen memory demand. It's a risk our SysAdmin colleagues are prepared to take. With the coming of 64-bit, they've been on the alert, and have always cattle-prodded us whenever we've been tempted to push the button to go higher.
Our defaults almost coincide with yours: 512 MB for 32-bit and just over 1GB for 64-bit. So what you yourself have just said is my own basic wisdom on the subject, too: if it aint broke, don't try to fix it.
[postscript: I work full-time at one company, part-time at another. By pure coincidence, both use the same JVM memory settings.] -
For a while now my computer has been saying " Start up disk is nearly full", however I don't have a lot of stuff saved on the computer I moved a lot to a flash drive, and all the other stuff are songs and recently saved essays for school. I have and frequently empty my trash can. I have researched this before and i see a lot of things that say get a external hard drive, but before I go and purchase one I want to make sure there is no other, simpler way, to solve this problem. Help Please.
You need an external drive so you can free up disk space. Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
Freeing space on your Mac OS X startup disk -
can i delete app which is publish and showing us waiting for review in itunesconnect ?
Hello Nicke,
Thank you for your response.
I have enabled the Analyctic and Debug log for the Management and Publishing server and let it run for 30min.
The debug log only shows 1 error when I used iisreset telling me the management server is unavailable (which it indeed was for a brief second). Otherwise it is completely empty.
The analyctic log show the following when I refresh my packages on the client (but don't see any errors in it).
Handle refresh request
Get entitled package list
Get user group list
Get user group list
Get entitled package list
Write package list to XML
Write package list to XML
Handle refresh request
Especially the write package list to XML looks interesting, but in the details I don't see anything special/wrong:
The analytic log for the management server only shows Get Publishing Metadata every 5 seconds (The time which the xml files should be refreshed). -
My apps say they are "waiting" and they have been for days updating. They must be stuck. Not all of them but about 10 that ia am waiting on. Does anyone know what do do about this?
Just to add a couple of more things that you can try ... Along with what TMM suggested ....
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
You can also try updating from the app description page rather than the Updates Tab. Do a search for the apps that needs to be updated - when it appears in the search - tap on the app icon. Then tap on Update or Install - whatever happens to appear next to the app icon - in the description page that pops up.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. -
Which are the supported phone number formats for IPhone?
Can anybody tell me which are the supported phone number formats for IPhone? or any link which will help me as I want to know exactly which phone numner formats are supported by iPhones? Thanks in advance
Thanks for your quick reply. But I want to know like the below mentioned phone number formats, which other formats are supported by iPhone,
1. +36 1 889 6600
2. +421 33/591 79 11
3. +39 035 322048
4. +65 6336 3456
5. +61 7 3027 8400
6. +86 516-83265979
Can you give some idea regarding this? thanks in advance. -
Cannot send email from iPhone. Outgoing settings are correct. Checked them against iPad settings which are OK and can send mail. What can I do?
For IOS7.02
The user name and password are in two places. Make sure they are correct in both locations.
Settings>>Mail, Contacts, Calendars>>your email>>
First spot is here under INCOMING MAIL SERVER
Below this is OUTGOING MAIL SERVER
Select: SMTP smtp.comcast.net>> PRIMARY SERVER :smtp.comcast.net>>second location of user name and password
Here is the second place that the user name and password must be checked.
I had changed my password in the first spot, but not the second spot. I had been receiving the same error message. This fixed my problem. -
My Mac suddenly stopped playing through my external speakers which are fine and working well with other devices.
Have a look in System Preferences -> Sound -> Output.
Plug the speakers out. Do you now see "Internal Speaker" as the name from the Built-in device? If you replug your speakers, is it now changing to "Headphone? -
F110 for vendor invoices which are debits and for credits BVTYP are used
Dear all,
I have the following situation:
- 1 vendor with many documents to pay
- some documents have 1 line item that is a debit (positive value in FBL1N)
- this vendor has 2 bank accounts in master data and I would like to pay the second one, so the Partner Bank Type (BVTYP) field is filled with number 1 and 2
- before payment at FBL1N, I execute the mass modification of all documents putting the number 2 at the BVTYP field
- but when I execute the proposal at F110, only the documents with debit have error: No pymt possible because items with a debit bal, but the total is credit for vendor
I have seen that when I do not fill the BVTYP field in the documents, the F110 is executed normally, I mean, it considers debits and credits (we have previously created a new payment form for this kind of vendors, one that could consider debits and credits).
PS: at FBL1N, when I open the document with the debit item, it doesn't show the field BVTYP.
Is there any kind of configuration that I have to make to F110 start considering the filled BVTYP field?
Thanks in advance.
Kathia TsuboiHi Abhi,
I have created some queries for the same. COuld you help me if I am going in the rite direction.
I have created a query to find the suppliers which are not being used in the POs for the past one year by using the below query: But for invoices and payments to be included, I am finding it a bit difficult....need help..............
--FINAL QUERY
SELECT vendor_id, vendor_name, creation_date, last_update_date
FROM po_vendors v
WHERE v.end_date_active IS NULL
AND v.enabled_flag = 'Y'
AND NOT EXISTS (
SELECT 1
FROM po_headers_all h
WHERE h.vendor_id = v.vendor_id
AND h.creation_date(+) BETWEEN (SYSDATE - 365) AND (SYSDATE))
ORDER BY vendor_id DESC
Is it possible to send me the program so that it would be helpful for me to use it.
email: [email protected]
Help Greatly appreciated.
Thanks
Aman -
When one starts to write t a new letter, Thunderbird asks for the recipient. Typing in a name, e.g. "jones", automatically creates a list of all previously used "jones" in that version of Mozilla. However, some of those addresses are obsolete and no longer usable. How can one edit this list.
Thunderbird support is over here. <br />
[http://www.mozillamessaging.com/en-US/support/] <br />
or here: <br />
http://forums.mozillazine.org/viewforum.php?f=39 -
How to call Instance Methods and set property values in BAPI?
In Project systems, for the three business objects viz.
Network, ProjectDefinition and WBS, there are two kinds of methods which are available : class methods and instance methods. We have tried calling some instance methods, for instance, BAPI_PROJECTDEF_GETDETAIL to get details pertaining to a project. While importing this BAPI, it shows two elements for mapping i.e. Current Internal Project(string) and Current External Project(string). We supplied these values for an existing project. Upon running this call through an XML client at our end, it
returned an error "Module Unknown Exception". This general message is present on every instance method thus far. Upon searching in BAPI Explorer for Project System->ProjectDefinition->GetDetail, we found that this BAPI didn't take any input parameter.
Following message was displayed in BAPI Exlorer for this BAPI:
"... Obligatory import parameters are the external and internal keys CURRENTEXTERNALPROJE and CURRENTINTERNALPROJE of the project definition.The system reads parameters contained in the structure
BAPI_PROJECT_DEFINITION_EX ..."
i) How to supply the values of Obligatory import parameters.
ii) What are the possible causes of this exception.
iii) How to call an instance method. We are using same mechanism for calling class as well as instance methods so far, we have been to call only class level methods successfully. Is there anything special that we
need to do to call instance methods.Hi,
what version is the SAP PS running? If WebAs or higher, create an inbound synch interface containing your two parameters in the request structure and as many as you require in your response structure. Generate an Inbound ABAP proxy, where you can plug in some code, i.e. create and instantiate an object of the required type and make the call to the BAPI.
If SAP PS on lower than WebAs, then create a wrapper function module and make it RFC enabled. Then plug your code in here and do the same thing.
Watch out for commits!
Cheers,
Mark -
Which are the best practices with mail for machos and any email client for PC
I got some mac`s at the office, and I want make a best practices manual for my users, like, please open the clip to attach the file intead of drag and drop, beacuse the pc users see the photo embedded into the message body.
could someone helpme?Why not print out Mail's Help files?
-
How to call two variable which are hold multiple value in to for loop
hi,
i have 4 item ,Two Select List And Two Check Box .Class id And Section are select list and student id and subject id are check box .i want to insert More then one subject id in to table corresponding to more then one student id .
eg. when i select class id 1 and section A then student id of class 1 and section A comes into Student id(check box item ) and all subject corresponding to class 1 comes into subject id( check box item).
now i want to insert multiple selected subjects with respect to selected multiple student id in to table when i press submit Button.
My table is
CREATE TABLE "STUDENT_SUBJECT_DETAIL"
( "S_NO" NUMBER,
"STUDENT_ID" NUMBER,
"SUBJECT_ID" VARCHAR2(50),
"SESION" VARCHAR2(50)
i am using this Code
DECLARE
STU wwv_flow_global.vc_arr2;
SUB wwv_flow_global.vc_arr2;
begin
STU:= wwv_flow_utilities.string_to_table(:P57_STUDENT_ID);
SUB := wwv_flow_utilities.string_to_table(:P57_SUBJECT_ID);
for i in 1..STU.count loop
for i in 1..SUB.count loop
insert into STUDENT_SUBJECT_DETAIL
values(CLA_SUB_ID_SEQ.nextval,STU(i),SUB(i),:p57_SESION);
end loop;
end loop;
END;
Edited by: Manoj Kaushik on Nov 20, 2009 10:10 PMDECLARE
STU wwv_flow_global.vc_arr2;
SUB wwv_flow_global.vc_arr2;
BEGIN
STU:= wwv_flow_utilities.string_to_table(:P57_STUDENT_ID);
SUB := wwv_flow_utilities.string_to_table(:P57_SUBJECT_ID);
FOR i in 1..STU.count LOOP
FOR i in 1..SUB.count LOOP
insert into STUDENT_SUBJECT_DETAIL
values(CLA_SUB_ID_SEQ.nextval,STU(i),SUB(i),:p57_SESION);
end loop;
end loop;
END;This doesn't look right to me:
1. You have 2 loops, and they are both using the variable i as a counter.
2. Your insert needs to be in the form: insert into table (column names) values (values to insert)
3. Why not use a trigger to get the nextval from the sequence?
Trent
Edited by: tr3nton on Nov 21, 2009 4:16 PM
Maybe you are looking for
-
I can't add a contact or edit contacts the little + sign is no longer on my phone...same thing on my iCalendar. I can no longer add events or dates. how do I fix this?
-
How to send to multiple people using same port?
I am trying to have one person send TWO audio sources to 10 others using same port- lets say 12345. I get "Can't open local data port:" error. The first audio is fine since I just use .addTarget(). Is there a way i can do the same for the 2nd audio s
-
Class literal in CLDC 1.0 vs. CLD C1.1
I'm using the NetBeans IDE v3.5 with the J2MEWTK 2.1 module to develop a CLDC1.0 MIDlet. I've found that if I use a class literal in my code (e.g. TextBox.class) the compiler gives the very informative error: "Errors compiling TestClassLiteralMidlet.
-
I want to make Tree( binding from database) and take the selection subnode from this tree and bind it anthor query but i have only the root node not subnode or subsubnode
-
Removing system preferences icons?
I have a few icons in my system preferences that are no longer needed but I can't seem to delete them. Nothing is showing up in a Spotlight search but the icons are still there!! How do I get rid of them? mark