Which are the lowest versions of UCM and UCCX with corresponding client software supported on Windows 7 64bit?

Hello,
currently using UCM 7.0(2) and CIPC 7.0.2 for hotline using UCCX 7.0(1) and Agent Desktop 6.6.54.
Which CUCM and UCCX Versions are needed to support Win7 64bit Client Software and which Version of CIPC can than be used?
We dont want to upgrade to latest versions yet! We only want to realise 64bit compatability for our clients. Therefore upgrading to lastest releases of UCM an UCCX would not be the correct answer.
My understaning of release documentation for this is following.
Win7 64bit supported when
UCM 7.0(2) using CIPC 7.0.4 or 8.6
UCCX 7.0(2) using CAD 7.0.2xxxx
Therfore we only have to do a maintenance update of UCCX from 7.0(1) to 7.0(2) to get new CAD Version compatible to 64bit.
Next we only have to update CIPC from 7.0.2 to 7.0.4 or 8.6 regardless of the UCM version because both newer CIPC version list CUCM 7.0 as compatible system.
I'm I right here????
Additionally is the expectable update cost free or does it bring any change in licensing?
PS: I know some other client software is not 64bit compatible in this solution like historical reporting client and so on. but this is no K.O. criteria and can be compensated otherwise.
Nachricht geändert durch erik

John Joslin wrote:
We don’t want people messing with the registry when they don’t need.
My apologies John I didn't realize that I was addressing the official custodian of Photoshop.
Incidentally my advice is intended for others in a similar situation who find themselves stalled during installation and otherwise contemplating a re-installation of Windows. I believe this would be obvious to most forum participants who had actually read my original post.

Similar Messages

  • Which is the lowest version of Crystal reports that shall work on BW 7.3?

    Hi,
    Can you tell me which is the lowest version of crystal reports that will work with BW 7.3?
    If given any reference document also it will be useful.
    Regards,
    Vignesh

    Just adding to Vitaly's point that when you load CR 2008 Sp4, you also need to upgrade SAP IK to the same patch level i.e. SP4
    You also have to load the respective transports for the service pack that you are loading.
    - Kuldeep

  • Which are the USB 2.0 ports and USB 3.0 ports?

    Purchased a hp DV7-6143cl. Which are the USB 2.0 ports and USB 3.0 ports?
    Thanks

    USB 3.0 may be a different color.
    Left side USB ports are 3.0
    Right side are 2.0
    See your Service guide  (page 19)
    Main page for your model

  • Why Apple don't systematically support the latest version of OpenGL and OpenCL with a new OS release?

    Why Apple don't systematically support the latest version of OpenGL and OpenCL with a new OS release?

    Maybe because it's necessary to build on a version that's been out long enough to be stable before releasing? Who knows?
    Are there specific features you're missing?

  • What are the current versions of Labview and Teststand

    Hello,
    i am currently downlading the current versions of teststand and labview for evaluation.
    In the Teststand-link i saw that it is called "Teststand 2012".
    1. But there was no version-information in the Labview-Download. Is this also version 2012?
    2. Are both things 32-bit-software?
    3. After i installed the evaluation-downloads - can they be activated with a key or do i have to install it again when the CDs arrive in my office?
    Thanks for help
    Solved!
    Go to Solution.

    OnlyOne wrote:
    Thx for the links.
    I am using Windows-7-64bit - should i prefer then also Labview 64? (The NI-download-Links only provides 32bit for download)
    Will there be any problems converting my existing Labview 8.5-Vis to the new Labview2012?
    Thank you
    You can have both the 32-bit and 64-bit installed.  Just remember your target when you build an exe.  64-bit compiled programs can only run on 64-bit machines.
    You should have no problem upgrading your code from 8.5.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Which are the tables updated in SRM and R/3 System for SC created?

    Hi,
    I want to know which are the tables updated in SRM system and also in R/3 system, when a Shopping Cart is created. Also how do i get the PO number for the Shopping Cart created.
    Thanks.
    Regards.
    Rahul

    Hello Rahul,
    All list of tables for eg. SC You can find in transaction BBP_PD on SRM side.
    These tables are (SRM):
    - CRMD_ORDERADM_H - for Header (Business Transactions Header)
    - BBP_PDHGP - Business Transaction Purchasing Information
    - CRMD_ORDERADM_I - for Item - Business Transaction Item
    - BBP_PDIGP - Business transaction item-Purchasing information
    - BBP_PDBEI - Backend Specific Item Data
    On R/3 side:
    EBAN - purchase requisition
    EBKN - purch. req. account assignment
    Regards,
    Marcin Gajewski
    please reward points for helpful answer

  • I have Firefox 8.0.1 on my Windows XP PC. On my Firefox opening page I still get a warning that I do not have the latest version of Firefox. Which is the latest version for me and from where do I download it?

    On the opening page of Firefox, I am constantly reminded (and sometimes warned) that I do not have the latest version of Firefox. Yet, when I click for upgrade, I start getting a download of the same version 8.0.1 which I am already running.

    This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained.
    Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same.

  • Which are the differences between desktop Pavilion and desktop envy?

    could i have information for the difference between Desktop Pavilion and desktop Envy?
    Thaks a lot!!!
    This question was solved.
    View Solution.

    DierreMax, welcome to the forum.
    If you provide a model number for the Pavilion and Envy I will tell you the difference.  Normally, the Envy is a newer model than the Pavilion.  Also, the Pavilion models are less expensive than the Envy models.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • When I click the desktop icon to open Firefox, it takes a long time to open so I end up re-clicking and then end up with 2 or 3 pages open. Why? I have Windows XP and this long delay existed with the previous version of Firefox and now with the FF

    All details shown under 'Question'

    There has been a security update of the Flash Player and the current version is 10.1 r85 , so you are two versions behind (previous was 10.1 r82).
    See http://www.adobe.com/software/flash/about/

  • Hi, I read all about  my Mac book doesn't recognize my iPhone. I tried every advice, still it doesn't work.  I have on MacBook the newest version of iTunes and work with iPhone 3 gs. The line says, you need iTunes higher than 10.6.3. It will not download.

    Hi, my problem: my iphone3gs is not recognized by my MacBook, although I tried every single step you suggested. It happened only shortly, before it worked perfectly. What to do?

    Your OS can not run iTunes higher than the version that you have now, thus no 10.6.3.

  • I have been editing a document on my MacBook Pro and iPad, which has the newer versions of Pages. Now, I cannot open on My MacBook. It says I need a newer version of OS. However, I'm not showing a newer version being availabe!!! Can anyone help???

    I have been editing a document on my MacBook Pro and iPad, which has the newer versions of Pages. Now, I cannot open on My MacBook. It says I need a newer version of OS. However, I'm not showing a newer version being availabe!!! Can anyone help???

    That is Pages for iPad v2.0, which Pages '09 v4.3 can't read.
    You need to either stick with the older version of Pages on the iPad or get Pages 5 for the Mac which is only available if you are running OSX 10.9 Mavericks.
    Unfortunately that is not the end of your woes because Apple has made iCloud convert the files to Pages 5 now, and Pages 5 has over 90 features deleted on top of doing a shocking job of converting older Pages files.
    Peter

  • My iTunes has multiple phones and computers with similar names associated with it. How do I know which are the right ones?

    I'm trying to clean up my iTunes account and I see several of the same phone or computer listed as authorized users. How do I figure out which are the correct phones/computers?

    Alvin777 wrote:
    Hi. I'd like to delete the Snow Leopard Snapshots in my Time Machine backup drive because it won't work with Lion
    I'm not sure what you mean . . . what won't work with Lion?  It sounds like it did do some backups.
    Is there a way or an app to know which are Lion snapshots? 
    There is a way, but it's rather cumbersome.  You have to start selecting a full system restore; there's a window showing all of the backups and the version of OSX. 
    Is there an app I could use to manage the snapshots if manually deleting them will cause problems and side effects later.
    It's best to use the Time Machine "Star Wars" display to delete backups, but you really shouldn't have to.  Let's figure out what's wrong first.

  • The ipad won't sync some photos, saying the file can't be read by the ipad, however it will sync some photos taken at the same time which are the same size and file type.  Why does it reject some and accept others?

    The ipad won't sync some photos, saying the file can't be read by the ipad, however it will sync some photos taken at the same time which are the same size and file type.  Why does it reject some and accept others?

    Hi there. I'm having the same problem: my iPad won't import some photos from a folder, saying that they can't be read. They are all JPEGS and some photos taken at the same time have synched fine, but out of a folder with 200 photos, it only lets me synch 37. I'm synching albums created via Photoshop Elements 6, which has worked fine until now.
    I've tried deleting all photos and re-synching, and have also deleted the iPod Photo Cache, but it hasn't made a difference.
    The iPad auto-updated to the latest version of iTunes, so maybe that's what's causing it?
    Any advice gratefully received!

  • Which are the latest business packages for ESS and Mss?

    Hi all,
    Which are the latest business packages for ESS and Mss?
    Regards
    Rajendra

    Hi rajendra
    It's all about R3 version, which R3 version u used?
    the following BP are available for ESS/MSS on service.sap.com u need sid-password to download it.
    <b>R3 4.6C/4.7 Enterprise</b>
    ESS: - Business Package for Employee Self-Service 4.6C - 4.7 50.4
    https://websmp102.sap-ag.de/~swdc/011000358700005104712004D/BPESS46C504_0-20000613.ZIP?_ACTION=DL_DIRECT
    MSS: - Business Package for MSS 60.1
    https://smpdl.sap-ag.de/~swdc/012002523100003529452006D/BPMSS601_19-20001489.zip?_ACTION=DL_DIRECT
    <b>ERP2004: - (R3 ECC 5.0)</b>
    ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
    https://smpdl.sap-ag.de/~swdc/002007974700000167412004D/BPERP4ESS0_0-10003146.zip?_ACTION=DL_DIRECT
    MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
    https://smpdl.sap-ag.de/~swdc/002007974700000246072005D/BP_ERP4MSS0_2-10002991.zip?_ACTION=DL_DIRECT
    <b>ERP2005 : - (R3 ECC 6.0)</b>
    ESS: - BP ERP05 ESS 1.0 Support Package 03 ( Up to SP5 available)
    https://smpdl.sap-ag.de/~swdc/012002523100000076042006D/BPERP5ESS03_0-10003288.sca?_ACTION=DL_DIRECT
    MSS: - BP ERP05 MSS 1.0 Support Package 03 ( Up to SP5 available)
    https://smpdl.sap-ag.de/~swdc/012002523100000076062006D/BPERP5MSS03_0-10003289.sca?_ACTION=DL_DIRECT

  • What are the difference between 4.6c and 4.7 versions?

    what are the difference between 4.6c and 4.7 versions?
    if any please give me answer
    regards
    ramanji

    Hi,
    Upgrade SAP or Installation of SAP R/3 and ECC
    What is ECC?  Where to find the installation steps of  ECC 5/6.0 with SQL as database and on windows platform with the steps including Solution Manager installation?
    http://service.sap.com/instguides
    ECC means Enterprise Central Component.
    There are all the relevant installation guides. You NEED SAPNet access because without a registered and licensed SolMan installation number you will not be able to generate the SolMan key for the ECC installation.
    Upgrade to 4.7
    Have you gone through an upgrade to 4.7? 
    What are the difference or changes associated with 4.7. 
    If you are currently on 4.6C and are inching forward to upgrading to 4.7 then this information might be useful to you.
    There is very little difference between 4.6 and 4.7, the only "steps" you should need are steps in SU25 ( skip step 1) Then go through all your role and perform a merge old new to bring in the new authorization objects 
    Just to forewarn you of a potential problem which have been encounter at the point of writing.
    After updating/ modifying roles in step 2C, when going back into 2C to make sure all roles are now green, 70% have gone back to red! 
    The maintenance done is ok, but there seems to be a problem while trying to go back into the roles again to re-generate. 
    SAP recognizes them as needing "adjustment", so you cannot pick them up in mass generate in PFCG as they do not come in, even though the authorizations tab is red. 
    This problem is currently with SAP and it is confirmed that nothing have been done wrongly. 
    Generally, the work is quite manageable in the upgrade, but don't be surprised at how big the upgrade is when compared to upgrading from 46b to 46c.
    If we have full software of 46c and 47E is it possible to upgrade 46c to 47E or there is a seperate 47E upgrade software need to be requested from SAP?
    Where I can get the document with upgrade steps on the service market place?
    It is of course possible and supported:
    http://service.sap.com/inguides
    --> SAP Components
    --> SAP R/3 Enterprise
    --> (choose your version)
    at the bottom there is an "Upgrade guide" for Windows and Unix.
    For Upgrades it is recommended to read ALL the notes mentioned in the 
    upgrade guide and to make sure one is using
    - the correct version of the "tp" program
    - the correct version of the "R3trans" program
    - the correct version of the "R3up" program
    All that is explained in the upgrade guide and in the corresponding notes.
    If this is your first upgrade you should take a person, that has some experience on doing that for the first time.
    Installation of SAP R/3
    Currently we are going to install SAP on a new IBM server from the existing COMPAQ server. Where can I get the steps for that. 
    Configuration is :
       OS - windows 2003 server
       DB - Oracle 9i
       SAP 4.7
    http://service.sap.com/instguides
    --> SAP Components
    --> SAP R/3 Enterprise
    --> SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)
    --> Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
    The above url is the SAP Service Marketplace with all the information you need to install, configure and run system. You need to be a valid licensed customer with a user ID and PASSWORD to use that.
    Without access you won't be able to successfully run any SAP systems because it has notes, patches etc.

Maybe you are looking for