Which are the quires has been build by using this ODS.

Hi,
Please some one tell me how to find out  The any ODS has been using in which are the queries .
Or which are the quires has been build by using this ODS.
Thanks,
GAL

Hi GAL BI,
You check in the meta data repository, you can get the list of queries build on that particular DSO.
The table RSRREPDIR (directory of all queries) - it will display the queries developed on the top of IC and MP.
If you want to know particular query where it is used click on where used list it will display .
Regards
KP

Similar Messages

  • When i try to install itunes the always show me an error which says    The Installer has insufficient privileges to modify this file: C:/Program Files/Bonjour/mdnsNSP.dll.

    When i try to install itunes the always show me an error which says
    The Installer has insufficient privileges to modify this file: C:/Program Files/Bonjour/mdnsNSP.dll.
    Please help!!!!!!!!!!!!!!!!!!!

    iPhone - not enough access privileges: Apple Support Communities
    ITunes Access Privileges Error?!?!: Apple Support Communities
    The installer has insufficient ...: Apple Support Communities

  • The Console has been disconnected. Close this window and re-launch the console to reconnect

    Hello,
    I am using Mobile Watch list 1.5.020000 (2434393) and when I try to connect a VM running Ubuntu 14.04 desktop with the VMware tooIs installed get this error message. I am running ESXi 5.5. I am not connecting through VPN and I am on the same network as the server. I can connect just fine through the vSphere client installed on a desktop machine. There have been several questions about this and no answer.
    From reading the posts I have opened the following ports to no avail:
    902
    7331
    7343
    443
    9443
    I also tried to forward all of these ports to port 80 on the server but that did not work either.
    Can anyone give me an answer?
    Thank you,
    Rob Durrance

    Welcome to the Community,
    From the given information - you are trying to open the console of VM via vSphere client but got an error message. However you are able to open the console via vSphere Web client. Is it correct?
    Try below options to narrow down this issue:
    Connect to vCenter and open vSphere client - check the VM console -     Note down the result
    Connect to vCenter and open vSphere web client - check the VM console -     Note down the result
    If both results are positive then it is working locally on vCenter with specific client version.
    Then You need to check the Machine vSphere client version and install same version matching with vCenter and try to access the console.

  • How can I see in which Group the workspace has been created ?

    Hi,
    The BeehiveOnline Tutorial on slide 7 shows that Workspaces are created within a Group.
    Also the Group Administration screen suggests this as I can indicate that user ABC gets the role 'Workspace Creator' in one Group but same user ABC does not get the role 'Workspace Creator' in another Group. (what else is the purpose of this role within Group Administration)
    But when I created my workspace, the system did not ask in which Group I wanted it to be created, neither can I see in the Settings of the new Workspace to which Group it belongs.
    Can you please help ?
    Thanks,
    Peter

    Peter,
    Workspaces and groups can be confusing - apologies that it was not clear.
    Perhaps some background as to why I described it that way may help.
    BeehiveOnline relies on groups to be self-sufficient - if you are in one group your world of available participants is that group and that group alone. So if you want to create a new workspace and add users they can only be drawn from that group. - hence the workspaces within a group setup. However, if you are in multiple groups then the linkage gets broken as you could add members to a workspace from different groups - if you needed many group to share a repository of read-only info for instance. This is in wide use on BeehiveOnline. Read and Write access is more of a problem as if anyone updates a document or creates one their id will be attached to it and if they are in a group you as a workspace member cannot see it will cause confusion.
    So workspaces are only group restricted if there is only one group. If you have multiple groups you have more scope but have to exercise more care.
    Hope that explains it.
    Phil

  • HT1725 My purchases are only playing halfway through the song then they jump to the next song even though the download has been completed "successfully". Does this mean an incomplete download? How do I rectify this? Please help

    My purchases are only playing halfway through the songs then they jump to the next song even though the download has been completed "successfully" Does this mean I have to repurchase and download again?

    Delete and redownload.
    You do not pay for redownloads.  Follow the direction:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • This document enabled extended features in Adobe Reader. The document has been changed...

    I am trying to distribute an interactive order form to approx. 50 recipients with Acrobat X Standard which I purchased recently.  Computer is Windows 7.
    I can go through the form editing and distribution as usual, but when I (or a recipient) opens up the distributed form with Adobe Reader, they get the message: “This document enabled extended features in Adobe Reader. The document has been changed and use of extended features is no longer available. Please contact the author for the original version of this document.”
    Oddly enough, sometimes is does work, but 90% of the time it doesn’t.
    And I have another, older XP computer with Acrobat X installed, and it works fine 100% of the time – weird....can anyone help?

    Hi Ken
    We have so many people who have not updated they are trying on 9. I might just have to tell them we can’t support under reader 10.
    Thanks
    Tania
    Never tell people how to do things. Tell them what to do and they will surprise you with their ingenuity. -General George S. Patton
    Tania Lindenmayer \ Manager Organisational Shared Services \ Jabiru Community Youth & Children’s Services Assoc (Inc) \ Ph: (07) 3269 0044  Fax: (07) 3869 0675 \ [email protected]<mailto:[email protected]> \

  • Determine the number of times the document has been printed

    Hi all,
    I have a form here ( SAPSCRIPT), there is certain field to show how many times the document
    has been printed, i use NAST-ANZAL, but it seems to display no correct value.
    Am I using the riht field anyway? Or missing something?
    Thanks ,,
    AUD

    Hi,
    Check for the field NAST-VSTAT.
    IF NAST-VSTAT = '1' meaning that document  is printed.
    Refer below example from NAST entries.  4000010000 document is printed 4 times.
    OBJKY                          KSCHL SPRAS PARNR      PARVW USNAM        VSTAT
    4000010000                     ZSGI  E                      XXXXXXX                             1
    4000010000                     ZSGI  E                      XXXXXXX                             1
    4000010000                     ZSGI  E                      XXXXXXX                              1
    4000010000                     ZSGI  E                      XXXXXXX                             1
    Rgds,
    Arun

  • HT201653 We are a retail shop which has a copy of AppleCare Protection plan. The box is not sealed. How can I tell if the product has been registered or not.

    We are a retail shop which has a copy of AppleCare Protection plan. The box is not sealed. How can I tell if the product has been registered or not.

    Since the only thing needed in that box is the small piece of paper with the (very long) registration code on it (usually found inside the booklet), see if that is actually there and, if it is, call Apple at 800-275-2273 and ask to be transferred to the Applecare department. Here is the link to the Applecare plan - just in case you may need it, see the fax numbers listed under para. 9 (Cancellation).
    http://www.apple.com/legal/sales-support/applecare/appmacnaen.html

  • I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open.

    I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open. Any ideas on how to resolve this?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • How to find the group ids from which the mail has been sent

    Hi,
    We are able to see the list of mails have been sent to respective mail ids with the help of tcode SOST.
    Is there any way to find through which group ids the mails have been sent.
    Tehe details showing as the mail has been sent by Batchusr.
    Please suggest how to find the group id from where the the mails have been triggered.
    Regards,
    Jena.

    Hi
    This is not helpfull
    If you open any notification QM03, there you will get tab " Action Log"
    If you click on action log , there are two fileds
    Date and time for task release
    I want to fetch these fileds in one of Z report.
    I am unable to find table name for these two fileds
    Task release Date
    Task release Time
    Can we add 'QN CHANGE DATE' parameter in the selection screen (just like QN creation date) w/ range?  The user want to run the report by QN change date as well.

  • Can you print from an iPad 2 using 3G in a home with no computer or wifi by using an iPhone 5 hot spot connection if the printer has been set up in another place with live wifi? I know this question is loaded but my dad lives in a rural area

    Can you print from an iPad 2 using 3G in a home with no other computer or wifi by using an iPhone 5 hot spot connection if the printer has been set up in another place with live wifi? I know this question is loaded but my dad lives in a rural area and is wanting a printer to use occasionally. He doesn't want to deal with a computer and I keep his iPad updated for him at my home.  Please shed some light on this for us PLEASE. Thanks

    In that case, it should be possible. I haven't tried this directly, but I believe it should work.
    You'll need to get an actual AirPrint compatible Printer.
    Check here for a list of Printers you can choose from.
    http://support.apple.com/kb/ht4356
    Once you have the compatible printer, using the Hotspot feature from the iPhone he'll have to create the Wifi bubble form the iPhone, and connect the Printer to that Wifi network.
    Then connect the iPad to that same Wifi network provided by the iPhone. When all that is done, the printer should appear in any of the Apps that can Print under the Action Arrow button.
    For instance in email, pressing the action arrow should show a Print option. In there the printer should appear.
    Alternatively you can simply buy a wireless router and setup the network through there even if there is no internet attached.  Connect the wireless printer to the router network, and connect the iPad or iPhone to that same wifi network to print.

  • One song on my iPhone only plays the background music on the build-in iPhone speakers. The song has been on my phone for a while and it used to play just fine. With the headphones on it plays normally.

    Please help! (I'm actually doing this for a friend but still)
    All you need to know:
    - iPhone 4 16GB
    - iOS 6.0.3 (I think, not the latest iOS but the one before that)
    - Song which started to act strange: niggas in Paris
    - All songs work fine on headphones (including above)
    - The song has been on the iPhone for a couple of months and used to play without any trouble
    - When you play it on the iPhone's speakers you either only hear the background music, no sound at all (for a few seconds) or a weird old FM-radio noise
    - Plays fine on iTunes
    All help is appreciated!
    Thanks.

    I have this issue too.  Same specs, newest OS.  Happening on "O.N.E." by Yeasayer, but doesn't play the vocals through the speaker or headphone jack, unlike your issue.  I just get all but the vocal track no matter what.  Plays fine in iTunes.  If you never get that distortion through the speaker any other time, maybe you can delete the song. 
    In my case, I can't delete the song through the phone since I use iTunes Match, but if you actually sync the songs/download them, that would be my first suggestion (swipe across, hit "delete.").  Maybe that would work?  Then resyncing or redownloading. 
    If not, maybe resetting or restoring may be the fix. 

  • How to findout Which are the User Exist had been activated for T.Code

    Hi Everybody,
    -->I want to know, what are the user exits have been activated or used for a particular t.code.
    --> I will give a small example it will be give clear idea on my question.
    -->For my client, they used lot of user exist and screen exist in the sales order screen,how to find out them. Is their any easy way to find out which are user exist had been acitviated for a particular template.
    Regards,
    Madhan

    If you mean how to see a user list with the T-Code they are using.
    Then you can just use T-Code SM04.
    It will give all the information about those user.
    Or If you mean User Exists.
    then please use this link
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    Thanks,
    Sugauli
    Edited by: Sugauli on Dec 11, 2008 9:20 PM

  • Report for the List of Vendor for which no Purchase order has been created

    Hi ALL
    Please let me know if there is any Report for the List of Vendor for which no Purchase order has been created
    regards,

    Hi Prateksha Vaid ,
    Go to transaction S_ALR_87012093
    Select accounts with no purchases checkbox and execute
    Diwakar
    reward if useful

  • Iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted?  Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

    iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted?  Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

    Hi Ken,
    Thanks for the reply. The project I am working on is a test project for a customer. They could potentially want a number of their educational subjects presented as an interactive text book. The intent of this first project with them is to establish a logical workflow that will allow us to efficiently estimate costs and allow for review throughout the design process. Having worked with customers on creative projects in the past I can anticipate that they will want a number of changes made once they see a working version of the interactive text book.
    It is a grim reality that no project can be fully edited and planned prior to working on it and I know revisions and changes are always made once the customer can see their product. It is ok with me if there is no easy way to pass the text back and forth from the customer and me without having to reformat everything but I just want to know that is the way it works in order to provide a realistic time estimate for the project.
    My hope was I would be able to export the formatted text, allow them to make edits and then reimport that formatted text. The style sheets I am using are from one of the iBooks Author templates.
    Do you know if there is a way to use (or export ) this style sheet so it can be used in a Pages Document?
    Or, would the best option be to have the customer install iBooks Author? This would require the customer to have a mac and the software so it doesn't work for all cases.
    Another idea I was considering would be to export the book as a PDF and have the customer add markup and notes to the PDF.
    All of these options do not seem too great to me.
    I am open to any ideas.
    Thanks,
    Rob

Maybe you are looking for

  • Fields in debmas, matmas, cremas

    Hi How to the fields in debmas, matmas, cremas Thanks Dushanth

  • "No more data to read from socket."?

    Hi everybody, We recently migrated from Oracle 10g Database Enterprise Edtion to Oracle 11g R2 Database Enterprise Edition with Data Guard and a dedicated standy-by database. The database is a data source for multiple applications. Among others, we a

  • Dana Nourie web application tutorials

    hi these are great tutorials and i've learned a lot from them - it brought so mcuh together in a clea dn easy to understand manner only problem after completing part 4 i can't compile my divelog.java file as its giving me the following error C:\divel

  • How do I get my Itunes to see the Apple TV?

    I purchased apple TV today & have connected it with my wireless network & all is good from the TV end however I cannot get intunes to sync in with the Apple TV?

  • Format string returned by PieChart labelFunction

    I am new to Flex and found this web page with an example Pie chart: Pie chart example with code I want to format the output so that, using this link as an example, the country is in a larger, bold font. I sure appreciate any thoughts or tips. Thanks