Which Audigy2 ZS Drivers - CD or Online drivers
I've just bought an Audigy2 ZS sound card (retail) for my XP computer and I'm confused....
Normally when I install new hardware I prefer to use updated drivers from the web, rather than the drivers from the included CD, as they've usually had any bugs in the original drivers fixed.Now I've been to the download page, and I think I've found the drivers I need, but I'm not too sure... The 2 drivers I've downloaded ready to install are:
SBA2_PCWDRV_LB__84_55-R.exe (Audigy2 ZS Driver Update .84.55 [6.34 MB]).
And:
SBA2_EAX4DRV_0303.exe (EAX 4.0 ADVANCED HD Driver Update for...Audigy 2 ZS [3.57 MB]).
(The only other driver available is a beta which don't want to use).Are these the correct drivers I need to install my sound card?Do I need both drivers?If these are wrong which driver should I download?Or do I have to use the drivers on the CD first, then update from the web?What's very confusing is that the first driver states it requires the 'EAX 4.0..' driver installed first. But the 'EAX 4.0..' states "If you later wish to install older or newer versions of...Audigy 2 ZS drivers, you must first uninstall the EAX 4.0 driver update". ?Any help will be very much appreciated.
I would reconmend you install your drivers off the CD and all media ap
ps.
Then use the auto update fuction to update your media applications, I do it this way as its just easier.
Then download the latest beta drivers. You wont need the EAX patch with this driver.
Download the latest OpenAL wrapper http://developer.creative.com/articl...&top=38&aid=46 Simply run the exe. and it self installs. NOTE: install this wrapper AFTER you update your drivers.
Simply over right the drivers with the beta but DO NOT say yes to any prompts stating something like " a file may no longer be needed and can be removed but doing os may cause other apps not to function" SAY NO AND KEEP THEM. I have always installed my driver this way and never had a serious issue yet.
NOTE: the betas may cause some Media Source Apps not to fuction correctly, however for the most things are fine anyway.
If you have issues with any media applications just re-install them. They are located here.
"C:\Program Files\Creative\Software Update\cache\" .
After you do this type in run "msconfig" and in the startup group shut down all Creative related software. You dont need anything here at bootup at all.
Ok, try that and see how ya go.
Message Edited by xmn on 2-4-2005 2:7 PM
Similar Messages
-
Continuing problems with Audigy2 Zs Drivers. Help!
Hi all,
I have had a recurring problem now that has gone on for far too long and is really killing me. I have the specs for the computer in my signature.
What happens, is everything works perfectly well until I install my Creative Audigy2 Zs Drivers for my second soundcard. Then when the computer reboots, the pc halts just before desktop to a blank screen for something like 30-45 minutes. The only way I can bootup, is if I remove every USB device from the system. It doesn't matter what USB device is plugged in, the computer just won't boot.
I have tried everything: updating drivers, changing around sound card PCI slot, changing IRQ's but nothing seems to fix the problem until I uninstall the soundcard drivers, where everything boots up as normal.
I really don't understand this, and i'm suprised noone else I can see are having problems with this soundcard, and drivers. I have searched the interweb for a solution, and others that are having this problem, but to no avail so far
Many thanks for any help,
DanQuote from: Ui30 on 12-July-05, 22:34:52
I really don't recognize this problem, but I wonder: what is your first soundcard? Is it an onboard one? Did you try uninstalling those drivers, then install the creative drivers and then reinstall the drivers of the first soundcard? (I asume you want to have two cards installed ..... may I ask why, just curious ...)
My first sound card is the onboard MSI 5.1 chip. I need two soundcards for flightsim (one for aircraft sound, one for vatsim atc). I have tried installing the creative before installing the onboard card, but the same thing
Quote
The second thing I can tell you: Creative often makes crappy drivers. One thing you could try is to start MSCONFIG (Start -> Run), and uncheck the SBDrvDet (or SBDrvDetect) in the Startup tab. That item causes some problems...
I will try that thanks. Could this be an IRQ problem (i am quite a newbie when it comes to irq's)
What do you think about beta bios drivers -
Installation CDs : which network card drivers are included ?
Hello,
I intend to install Arch on a laptop with Broadcom and Atheros network cards (LAN and Wifi).
I would like to check which network card drivers are present on the Arch installation CDs to check compliance with this laptop.
Where can grab this info ?
Thanks.
Bye,
BrunoThanks for attention.
The network cards present on my laptop (Acer Aspire 4750) are :
Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PC-Express) (rev 01)
Ethernet controller: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
I would like to check if the needed drivers (one or both) are included in the installations CDs (netinstall / core).
Bye,
Bruno -
Continuing problems with Audigy2 Zs Drivers. He
Hi all,
I have had a recurring problem now that has gone on for far too long and is really killing me. I have the specs for the computer below.
What happens, is everything works perfectly well until I install my Creative Audigy2 Zs Drivers for my second soundcard. Then when the computer reboots, the pc halts just before desktop to a blank screen for something like 30-45 minutes. The only way I can bootup, is if I remove every USB device from the system. It doesn't matter what USB device is plugged in, the computer just won't boot.
I have tried everything: updating drivers, changing around sound card PCI slot, changing IRQ's but nothing seems to fix the problem until I uninstall the soundcard drivers, where everything boots up as normal.
I really don't understand this, and i'm suprised noone else I can see are having problems with this soundcard, and drivers. I have searched the interweb for a solution, and others that are having this problem, but to no avail so far
Many thanks for any help,
Dan
MSI K8Neo2 Nforce3 Platinum
Tagan 420W-T0 PSU
AMD Athlon 3200 64 Socket939
2 x Crucial 52mb DDR RAM PC3200
WD 80GB Dri've, 8mb Cache
Maxtor 3GB Dri've
Sony 8x DVD Dri've
Lite-On 48x 48x Burner Dri've
Ati 9600 256mb
WindowsXP Pro SP2Quote from: Ui30 on 12-July-05, 22:34:52
I really don't recognize this problem, but I wonder: what is your first soundcard? Is it an onboard one? Did you try uninstalling those drivers, then install the creative drivers and then reinstall the drivers of the first soundcard? (I asume you want to have two cards installed ..... may I ask why, just curious ...)
My first sound card is the onboard MSI 5.1 chip. I need two soundcards for flightsim (one for aircraft sound, one for vatsim atc). I have tried installing the creative before installing the onboard card, but the same thing
Quote
The second thing I can tell you: Creative often makes crappy drivers. One thing you could try is to start MSCONFIG (Start -> Run), and uncheck the SBDrvDet (or SBDrvDetect) in the Startup tab. That item causes some problems...
I will try that thanks. Could this be an IRQ problem (i am quite a newbie when it comes to irq's)
What do you think about beta bios drivers -
i have installed photoshop illustrator on mac which is working fine but update online is grew out and not able to update
Hi Team,
The option to disable to update is chosen by your IT admin when he created the package.
The IT Admin can re-enable the update by following the link below:
Disable auto-updates | Application Manager | IT administrators
Cheers!
md -
I opened Adobe Acrobate XI Standard to create a form. I then selected From Template, which took me to Adobe FormsCentral Online. However, I think the form is an HTML web form. All I wanted was a regular PDF form that I could email my co-workers for an internal project we're colletively working on. Now I see that FormsCentral is going away and I can't get my doc to save as a PDF without an upgrade? Help
You should be able to log into the online Formscentral Acrobat XI air app and see your doc there. From there you would need to save it out as a PDF without a submit button to have it continue to work past July. If you don't see your online form(s) please let me know the adobeID you use to log into the service as well as the form name that is missing and I will look into it for you.
Andrew -
Whenever I use something which uses Java (for example, an online game) and then click the address bar, it seems that the address bar is disabled. I cannot highlight or type in the address bar unless I interact with another program and then switch back to Firefox. When I interact with Java again, the same problem persists! Help!
Sorry, I didn't know what category this should be under, but it's urgent.Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
Some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)''' -
Hide/show yellow bar which tells "this document is an online review" within IE
Hi
I have installed Acrobat X 10.1.
When ever I open any PDF within Internet Explorer one yellow bar always poping up which displays "this document is an online reiview" which is consuming my real estate as well as I don't want that because I am not doing any review.
The question is how do I get rid of this yellow bar always but still opne a document in write mode.
Thanks,This sounds more like a user question that an SDK question - try the
Acrobat forum. -
1) (Right click) Context menu is IE's context menu(!) and (2)when I attempt to use a sight that uses scripts (a site that I've used extensively and which I use to conduct my online college courses - application is Angel), it goes blank
== This happened ==
Every time Firefox opened
== 2 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; WWTClient2; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; Creative AutoUpdate v1.10.10)Previous post from "Not Anonymous" but from the original poster; I used the link provided in the email notification and now have to indicate who I am???
Thanks; starting FireFox in safe mode and disabling all add-ons did solve the problem; however, a new problem has emerged. To re-enable the add-ons, you need to open up and use the add-ons control panel through FireFox. Any attempt to do so causes the FireFox add-on control page to close immediately.
Thanks for your help. -
I have recently purchased the latest ipad. Got to say I am extremely dissapointed that it does not support Java or flash which are platforms needed to do online business banking. I am now faced with ditching an expensive toy for a competitors product that offers full business functionallity. Is there any way round this ? It seems extremely bad form on apples part not to support this or make it very clear of the products limitations at the time of purchase.
Well, my bank has an app but the website does not use Flash or Java. While my credit union doesn't have an app, their website doesn't require Flash or Java either.
I pay all my bills online, bank, and access my brokerage accounts. None of the sites I have encountered require Flash or Java. Some government sites do require Flash so I use Photon, it's a browser that does Flash content very well. So you might check out some alternatives browsers.
Otherwise I suppose you will either dump you bank, your iPad, or just not do online banking. -
Mid 2012 13" Macbook Pro Windows 7 Professional 32bit, which Boot Camp Drivers?
Hi,
I've managed to partition my Hard drive, assigning 100GB to the Windows Partition. I've installed Windows 7 Professional 32 Bit SP1 and have managed to install MS Office 2007 (I've not installed any other updates as I can't connect to the internet over wireless yet as I've not installed the drivers).
I've downloaded three sets of of Boot Camp Drivers and have been unable to get any to work. The ones I've downloaded are:
Boot Camp Support Software 5.0.5033
Boot Camp Support Software 4.0.4033
Boot Camp Support Software 4.1.4586
I now understand that v5 is the wrong version to use, however for both of the "version 4's", it is telling me that they are incompatible with this version of Windows... So I am very confused... I've unzipped the archives and have tried to run the set-up (and even tried the individual drivers)...
Does anyone know where I'm going wrong? I don't know which drivers I should be installing?
Thanks,
AlexI've managed to solve it! Basically, it all came down to installing the "correct" package. I had foolishly assumed that the highest version number would support all the latest product.... However in the end I had to install this package:
http://support.apple.com/kb/DL1635
Basically, you need to scroll down to the bottom of the page (I assumed all the pages were the same as they have the same introductions), and open up the "system requirements" tab and check to see if your machine is on that list. Once you've found one with your machine, download and run that. Remember to extract the folder from the zipped archive first. It won't run if it's "still within the archive"...
Cheers, -
Which Pwr Mgr drivers are needed for XP system in T60
The T60 Drivers list shows two different listings for XP Power Manager.
Which one should I use or do I use both?
Recently had to re-install Windows and Pwr Mgr is giving an exception message while trying to run PWRMGRTR.DLL and the normally green Pwr Mgr icon in the Task Bar is white with dotted black border.
My system is T60 2007-49U running XP Pro.Good day.
Looking at this T60 Driver Matrix: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-62928
I see only one Power Management Driver (v1.67.0.02, July 2013), for all Windows versions, and only one Power Manager Application (v5.20, April 2013), specifically for XP. Are these what you have installed?
If you're looking at a different driver listing page, would you post the link please?
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee. -
OS 10.9.2 - Sound issues & which Bootcamp SW drivers?
Hi ...
I have an older mac pro (2008 late) and recently upgraded to 10.9. To make a short story strait it has been uber **** with 32 bit windows pro but I did eventually get it installed. What isn't clear is which drivers? I tried bootcamp 4.1.4586 from apple's site but when I try to run the installer in windows mode I get a complaint that the version isn't compatible with my version of windows. What should I be running? Should I just bail and use x64 bootcamp and a 5.x version instead? As well I have a long standing problem getting sound to be anything but a whisper.
Any ideas? This upgrade to 10.9 just made a not great situation worse at least for sound and figuring out which drviers to use.
Cheers
Greg SFrom the Boot Camp system requirements page located here: http://support.apple.com/kb/HT5634
The Mac Pro needs to use this version of support software:
Mac model
Windows 8, 64-bit
Windows 7, 64-bit
Windows 7, 32-bit
Windows Vista, 64-bit
Windows Vista, 32-bit
Windows XP, 32-bit
Mac Pro (Late 2013)
5
Mac Pro (Mid 2010)
5
5
4
DVD
DVD
DVD
Mac Pro (Early 2009)
5
5
4
DVD
DVD
DVD
Mac Pro (Early 2008)
4
4
DVD
DVD
DVD
Mac Pro (Early 2007)
DVD
Mac Pro (Mid 2006)
DVD
And please note that there is no late 2008 Mac Pro as you stated you have. -
New 32bit audigy2 zs drivers today (may 12
there are new non beta drivers out today for the audigy2 zs line.
does anyone know why/if...
. they don't include the EAX 4.0 ADVANCED HD Driver Update (SBA2_EAX4DRV_0303.exe Released on 9 Nov 2003), thats still a seperate download...
2. they are "newer" than the beta driver released on april 5th? i know they are newer being that they were just released today, but are they the beta's updated to non beta status or an updated older driver?so this new package (may 2th 2005) contains the july 29th 2004 update that was a repack of the march 29th 2004 and november 9th 2003 updates, but lists as a requirement the november 9th 2003 update?
Creative Sound Blaster Audigy2 and Audigy2 ZS Driver Update .84.55
SBA2-WEBUP-W9-LB
This web download combines the fixes and enhancements from previous driver updates for your Creative Sound Blaster Audigy?2 and Audigy?2 ZS series internal audio device.
Fixes:
SBA2_PCWDRV_LB__84_55.exe (Released on 9 Dec 04)
* Enables Digital Rights Management support
EAX4DRV_AUDIGY2__84_50.exe (Released on 29 Jul 2004)
* Resolves the issue of the computer not responding when the phone cable is disconnected from the modem while an Internet connection is being established
SBA2_WEBUP_PCWDRV_-84-40.exe (Released on 29 Mar 2004)
* Ensures THX? Setup Console does not reset to default values when launched
* Removes noise and distortion when using THX Setup Console
* Synchronizes settings between EAX? ADVANCED HD? and Creative Graphic Equalizer
* Enables MIDI device name display in both Windows? Multimedia Device and SoundFont? Bank Manager
* Enables activation of imported EAX effect presets
* Resolves the audio mute issue when certain EAX effect presets are activated
* Restores system functionality when searching backwards or forwards while playing DTS?-encoded audio CDs on an external DVD player, with audio routed through your audio device
* Enhances the performance of PC games that use nati've OpenAL API extensions
Requirements:
* Microsoft? Windows? XP Service Pack 2 (SP2) or Windows 2000 Service Pack 4 (SP4)
* Creative Sound Blaster Audigy 2 or Audigy 2 ZS series internal audio device
* EAX 4.0 ADVANCED HD Driver Update (SBA2_EAX4DRV_0303.exe Released on 9 Nov 2003) for Sound Blaster Audigy 2 and Audigy 2 ZS installed
Note:
* Do not install this update for Sound Blaster Audigy 2 Value, external USB Sound Blaster? or PCMCIA Sound Blaster audio devices.
i was confused before, but now i'm MORE confused... -
Which (video-) hardware drivers are included in OSX?
Hello!
Is there a list of all video cards (NOT graphic cards) supported by OSX (10.3 or 10.4).
More specific:
Are the Pinnacle DV 500/700/1000 supported by OSX, or do I have to get drivers from some where else (if they exist!)?
Cheers
BalrockImmortal Balrock
http://www.blackmagic-design.com/products/ (http://www.blackmagic-design.com/products/hd/) (Also check this: http://dv411.com/decklinkcards.html)
http://www.aja.com/products_kona.html
http://www.digitalvoodoo.net/ (check this as well: http://www.bosfcpug.org/beta/index.php?option=com_content&task=view&id=94&Itemid =87)
http://www.auroravideosys.com/
http://www.bluefish444.com/ (although drivers are beta - check also this: http://dv411.com/sdgreed.html)
If you want a relatively inexpensive solution, your bets bet, I think, is black magic.
Message was edited by: hyphen
Maybe you are looking for
-
Having strange issues with kbmap and utc/localtime
Hello, I've been using Archlinux for a month or so, never had any problems until now. 1. Setting the keymap doesn't stick. At first I had the German keymap selected in System-Preferences-Keyboard, and at reboot it would switch back to the standard US
-
somebody can helpme please
-
Calling java function load and stored in database
Hi , I try to call a java fonction loaded and published in database (Oracle 8.1.7.4ee). this function call an OS command ... the PL/SQL call is completed but de command set in parameters function is not execute ... next is the code : import java.lang
-
Generate and Save PDF / Append Filename with Username
When you select a row to download as PDF in FormsCentral response table, and Save As dialog box appears, it would be nice if it appended the filename so we don't have to do this ourselves everytime. If you forget to append the filename it will use t
-
How can I remove leading spaces?
I have a 40 page PDF and I used the Form Wizard to generate fields for me. I noticed that some of the fields have leading spaces in the name. These fields cannot be used via the doc.getField(name) syntax. It simply returns null. If I manually rename