Which audio interfaces are compatible with a Lightning to USB Camera adapter???

Would like to use my iPad Mini with Lightning Adapter in conjunction with an audio interface. What are the requirements for a device that would accept the adapter (what type of USB input/output). Thanks!

It should work.
Reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
And, just is case, did you remember to turn the camera on after it was connected to the iPad?

Similar Messages

  • What audio interfaces are compatible with the iMac/Intel computer?

    I see that MOTU has Intel-compatible drivers for its high-end audio interfaces. Are there any other audio interfaces--USB or Firewire--that are at present compatible with the Intel Duo Core machines that are under $300? I've checked with Tascam and Presonus, and theirs are not yet compatible. I have an inquiry in to M-Audio, but haven't heard back yet.
    PS: Does anyone else think it is just a teensy bit dishonest of Apple to be selling audio interfaces in its online store without pointing out explicitly that they don't work on the Intel machines?

    Well, it looks like M-Audio's Firewire Solo has a beta driver available for the Duo Core. Better than a poke in the eye with a sharp stick. And it's well under $200 at a couple online stores.

  • Which Audio formats are compatible with FCE?

    I just bought the cutest recorder, the Zoom H1 arrived today and it's going to be so handy for capturing audio files. As I'm playing with it, the WAV format it records imports and places just fine in FCE. But for some things I want a lower quality sample which will yield a longer recording time (like leaving it on for hour or more for lecture) and tried mp3 sample rate but the mp3 sample recording does not produce sound in FCE, but just a silence with blip, blip, blip...
    Shouldn't mp3 work in FCE?
    Also, I use Audacity and it opens none of the WAV or the MP3 and gives an error. I will be in audio 'he-double toothpicks' for a while until I learn how to capture, regulate, handle recorded files. Isn't there something like StreamClip for audio that will make your audio files compatible?
    I don't know what I am doing here folks and need some advice please.
    TIA,
    Ken

    R. Mitchell Fore wrote:
    For use in FCE, your audio should be AIF at the same sample rate as your Sequence. There are a number of ways to convert from other formats. http://fcpbook.com/Audio1.html
    Okay, I read that link and ordered Quicktime 7 Pro which charged me $29.99 and there is nothing to download. It turns out that it is just the key to unlock Quicktime pro from Quicktime 7. The problem is, I have Snow Leopard and am using Quicktime 10 so version 7 is an old version. I think I paid money for something I cannot use. Quicktime would have been the way to convert my files to AIFF. This is frustrating. Now I need to go find a way to get a refund from Apple.

  • Which portable speakers are compatible with my Zen vision M

    can anyone tell me which other speakers are compatible with my Zen Vision M. other than the Z500thanks

    all speakers including other brands that has a Line-In will work with the player for audio....

  • Which photoshop elements are compatible with windows 7 64-bit?

    Which photoshop elements are compatible with windows 7 64-bit?

    All Elements versions for Windows including PSE12 are 32 bits applications which can run without problems on Windows 64 bits.
    You can download the free 30 days trial version to see by yourself.
    (The 'Premiere Elements' for Windows is 64 bits. PSE12 for Mac is 64 bits)

  • What is the exact technical difference between "Lightning to USB Camera Adapter" and "Lightning to USB Cable"

    Mainly I am interested in attaching the iPhone to a receiver (or car etc.) to play music.
    Both the "Lightning to USB Cable" and the "Lightning to USB Camera Adapter" seem to do the trick. So what is the exact technical difference between the two items?
    When connected to a receiver, is the iPhone the USB Master in both cases? Is the USB "Audio Device Class" standard used to transmit audio?

    Thanks for all the answers! I think I should specify the use case much more clearly. Sorry for not having done this earlier.
    Use Case 1:
    When I connect the iPhone to the receiver I can use the Lightning to USB, because the receiver has a female type A, just like e.g. a PC or like the charger. So I would agree that the Receiver must be the USB host, and the iPhone the USB device. This works just fine in my case, with iPhone and iPad.
    In this case, the audio goes from the device to the host, or "Audio-in".
    Use Case 2:
    A friend of mine has a small device that converts USB to Toslink. This thing has a female Mini USB Type A, which is typically used at the receiving side of a USB connection. This device can be connected e.g. to a Mac, and then the Mac can output audio via this device to receiver which accepts optical Toslink signals.
    In this case, the audio goes from the host to the device, or "Audio-out".
    It is this use case 2 that I am unsure about:
    a) Can the Lightning to USB cable be used in this case (assuming that I find the necessary non-standard adapters to actually connect the USB ports)? This would mean that the iPhone can act as a USB host with the Lightning to USB cable.
    b) I know that the Lightning to USB Camera Adapter does convert the iPad into an USB host, otherwise it could not read data from a camera. So could this adapter also be used to produce "Audio out" to a USB device that supports receiving music?
    If yes, would this also work with an iPhone (as pointed out in another answer, the iPhone does nor support reading pictures from a camera)?

  • Lightning to SD Card Camera Reader OR Lightning to USB Camera Adapter?

    I should buy one or the other for a Nikon D3100 since they are sold separately nowadays. Which is the best choice? Considering the (not so good) reviews for both of them, I have the impression that the USB camera adapter is more universal and less prone to problems...

    All my pro camera presently use Compact Flash cards. I've never had a problem using the Lightning to USB Camera Adapter with any of my cameras.
    the choice you make should be based on what is most convenient for you. If you have multiple Cameras or have a camera with a card other than an SD then the choice is obvious.

  • Original Apple Lightning to USB Camera Adapter gives warning

    I have a 4th generation iPad with iOS 7.1 and the original Apple Lightning to USB Camera Adapter bought online from the US Apple Store. Whenever I plug it in the iPad I get this warning: 'This cable or accessory is not certified and may not work reliably with this iPad.' If I close the iPad cover and leave it for a few minutes, when I unlock it and go to the Settings<General<About page the cck is listed. I tried the lightning usb adapter on an iPad with iOS 6 and it was immediately recognized. Is this a software problem or a faulty camera adapter?

    The original Camera Connection Kit uses a 30-pin connector thile the iPad 4 has a lightning connector. You mention an adapter. Are you using an original Apple-branded adapter? I have seen other posts here that say it is likely this adapter that is causing the problem.
    Using the Lightning connectors do no cause this problem.
    http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a and
    http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a

  • HT4101 The Lightning to USB Camera Adapter doesn't work

    I just bought the Lightning to USB Camera Adapter but it doesn't work and show the message: it is not an authorised accessories..may not work reliabily

    the adapter doesnt work with ios 7 on a lot of new devices, so untill apple fixes the issue, here is a workaround http://www.youtube.com/watch?v=pE28JwxQ3Zc

  • Lightning to USB camera adapter.

    I recently purchased an IPAD MINI and a Lightning to USB Camera adapter.  I went to plug my Sony Cyber Shot digital camera into my Ipad Mini via the adapter and it says "USB DEVICE REQUIRES TOO MUCH POWER.  Yet, when I plugged in my big Nikon D5000 SLR camera, it works fine.  My problem is, we like to carry around the smaller Sony camera more often, and it wont work with the new adapter.  Any suggestions?

    Please try to disable USB charging (if available) on your Sony Cyber Shot or set USB connection type as  [PTP] (Picture Transfer Protocol) or Mass Storage Device.
    If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content. If some files do not import as expected using one mode, try switching to the other mode and importing again.
    Good luck!
    (For more info: http://support.apple.com/kb/HT4101)

  • Lightning to USB camera adapter polarity sensitive?

    Lightning to USB camera adapter works with Nikon D90 camera well, only the lightning plug is polarity sensitive. If you turn around it doesn't work anymore. Is that normal or is my cable may be defective?

    G1952 wrote:
    Hi Tom,
    Did jou also test this Adapter Cable? Is it possible this works different?
    Thanks, Gerrit
    I only have the lightning cable on my iPhone and it works either way. My iPad 2 camera connection kit uses the prior 30-pin connector.
     Cheers, Tom
    Look at http://www.macworld.com/article/1168555/what_apples_new_lightning_connector_mean s_for_you.html
    It's not polarized. Yours must be defective.
    Message was edited by: Texas Mac Man

  • Can you connect a usb SuperDrive if you use a lightning to usb camera adapter and a usb hub?

    I was just wondering if ypu could connect a usb SuperDrive if you use the lightning to usb camera adapter, a usb hub, and then plug the SuperDrive into the hub. Will it work to play disks, or movies, or something?

    No, drive consume too much power.
    Try using a wireless flash drive.

  • I got lightning to usb camera adapter but get fault message on ipad mine "cannot use device" the connected usb device requires too much power

    I tried to use lightning to usb camera adapter but every time I plug it into my ipad mine it give cannot use device. the connected usb device requires too much power. how could I use this attachment.

    Or use the camera's SD card instead.
     Cheers, Tom

  • HT4101 I can't use my lightning to USB camera adapter to connect my new Sony Cybershot DSC-W730 to my new ipad Air. It says the connected device needs too much power. Any ideas what to do?

    Has anyone a solution to my newly purchased lightning to USB camera adapter not connecting my Sony Cybershot DSC-W730 to my new ipad Air? It says the connected device requires too much power.

    Use the camera's SD card.
     Cheers, Tom

  • Which MPEG4 flavours are compatible with iMovie 08?

    Hi there!
    I just tried out iMovie 08 and I like it quite a lot. But there is a problem with my videos, which seem to be incompatible. I record video with an Casio Exilim EX-S500 camera which produces in an Avi-container with tracks in this format:
    1. Video: M4S2 aka MS MPEG-4
    2. Audio: DVI ADPCM
    Ok, I found out that the sound format is kind of problematic, but I don't know what's the matter with the video stream. MPEG-4 should work. There is nowhere a list to be found exactly stating the video formats iMovie 08 likes. It would be nice to use my videos as they are, but if conversion cannot be avoided (arg!), I would like to know a good target format.
    *Which format*
    *a) works fluidly with iMovie 08 (skimming etc.) and*
    *b) preserves the visual quality of my movies without exploding file size?*
    I'm experimenting with MPEG-4 and H.264 encoding in MPEG Streamclip just now. I'm trying to find a suitable setting for the quality control.
    Best regards,
    Henry

    Ok, I found out that the sound format is kind of problematic, but I don't know what's the matter with the video stream. MPEG-4 should work.
    MS MPEG-4 is a proprietary, non-standard MPEG-4 compression format. While you may have the appropriate QT component installed that will allow you to play these files back in the QT Player, I am not sure the codec will allow iMovie '08 to import/edit the video natively. And, as you previously indicated, the DVI ADPCM audio is known not to be compatible. Best approach would be to convert files to a fully supported (i.e., QT playback, conversion, and edit compatible format) manually or simply import them to iMovie '06 if your QT components support conversion to DV by iMovie '06.
    There is nowhere a list to be found exactly stating the video formats iMovie 08 likes. It would be nice to use my videos as they are, but if conversion cannot be avoided (arg!), I would like to know a good target format.
    For the most part, users here are still learning which compression formats are compatible and which aren't. I like AIC/Linear PCM (Apple Intermediate Codec with "Big Endian" audio), H,264/AAC, MJPEG/Linear PCM, DV, and MPEG4/AAC formats when proper data rates are used to preserve maximum quality. Would also like to use Apple Animation/Linear PCM which is import/edit compatible but it has an output bug which renders all video as a "black" display. Apple Video does the same thing but has less color depth so I would avoid it anyway. At least one individual has indicated Photo-JPEG video may have the same "black" display problem but I was not able to confirm this. Other formats will likely remain a questionable until somebody tries them and reports back. I suspect there may be other, less commonly used formats that also may be compatible.
    I'm experimenting with MPEG-4 and H.264 encoding in MPEG Streamclip just now. I'm trying to find a suitable setting for the quality control.
    H.264 usually works best if you simply do not limit the video data rate. However, to give you an idea of the data rates involved, this usually requires a video data rate on the order of 18-20 Mbps for VGA SD dimensions. MPEG-4 video data rates usually need to be 2.0-2.5 times as great. Total AIC audio + video is about the same as H.264/AAC, DV usually about 55 Mbps, and MJPEG/Linear PCM only about 12.5 Mbps (which is why I suspect iMovie '08 uses it for thumbnails and storage of photos used in a project).

Maybe you are looking for