Which Audio Setting for MPEG share for use on PC or burning to DVD???

I just "shared" a movie (a slide and video show with soundtrack edited on Premier Elements 8)  to "Use for playback on this PC or burning to DVD"  (created an MPEG).  The audio export didn't work though.  I used the NTSC DVD Standard preset that gives the 192 kbps, 48 kHz, Dolby Digital audio setting.  Is this the setting I should use, or is there another audio setting that would work?  There is just silence on the end product.  Thanks for any help.

Now, are you burning to a DVD-data, or to a DVD-Video?
If the latter, then you can either Burn to Disc from PrE, or can Burn to Folder, and then use Roxio, Nero, or the great, free burning utility, ImgBurn to do the physical Burn.
Some time back, WMP had the DVD playability disabled for all burned DVD-Videos. Not sure if MS has added that back in. To the best of my knowledge, WMP has no burning capabilities in it, but could be wrong with the newest versions.
Hope someone else has ideas, and a better knowledge of most recent versions of WMP.
Good luck,
Hunt

Similar Messages

  • How does one install non-English character sets for use with the "find" function in Acrabat Pro 11?

    I have pdf files in European languages and want to be able to enter non-English characters in the "find" function. How does one install other character sets for use with Acrobat Pro XI?

    Have you tried applying the update by going to Help>Updates within Photoshop Lightroom?  The update should be using the same licensing?  Did you perhaps customize the installation location?  Finally which operating system are you using?

  • On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on the Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

    On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on my Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

    I used iDVD to create an IMG file
    You created the video DVD, the IMG file, with iDVD and just burned it with Disk Utility. As Klaus1 pointed out Disk Utility can't create video DVDs.
    OT

  • How to understand which BC set for Object BUS 2121 has to be used.

    hi,
    How do we understand this,
    If i have a BO BUS 2121 - then how do i know which BC set has to be used. and wht would be the suitable  BC Set for my reuirement .
    On what basis would i come to know that what would be the prefered BC set for this.
    Kindly suggest me with some solution or suggestion
    Thanks,
    shankar

    Hi,
    BCSet is just sample configurations for your quick system setup. You can learn process level definition setting from sample BSSet configuration and copy/enhance it for customer scenario.
    For BUS2121, there are 3 BCSet are available.
    /SAPSRM/C_SC_600_000_SP04  Shopping Cart Without Approval
    /SAPSRM/C_SC_600_001_SP04  SHopping Cart with One-Level Manager Approval
    /SAPSRM/T_SC_600_000_SP04  Test Workflow Settings: Shopping Cart ( Several samples )
    Regards,
    Masa

  • CProjects URL - to be set for use on intranet

    Hi,
    I am to work on cProjects 4.0 and in the IMG settings I need to set the URL which I'd use to access cProjects on the browser. How do I set the URL for use in the intranet? Which transaction do I use and where exactly do I set? What is the URL string I ought to use? I mean, is there some rule that I need to be aware of for setting the URL to be used in the browser?
    Thanks very much.
    Regards,
    Bittu.

    The url to be specified in the spro setting will be  of the following  form
    This is for ECC6.0
    https://<hostname>:<portname>/sap/bc/webdynpro/sap/cprojects  
    Regards,
    S.Jenibalet

  • Which Playback Setting for 1080P

    Right setup is:
    Blackmage Decklink HD
    Final Cut Studio 2
    External Monitor connected through HD-SDI
    Footage XDCAM-EX 1080P 25fps
    My question is purely to do with External Playback. The sequence we are editing in is fine because we just match settings.
    So in External Playback Settings which one do we choose from the List.
    We normally shoot 1080 50i - so i normally choose "Blackmagic HDTV 1080i 25hz 10bit 1920 x 1080" and all works fine.
    However I want to choose a progressive setting to make sure playback on monitor is perfect but there doesn't seem to be an equivalent setting in the presets.
    There are 1080P settings but they aren't 25hz but 24 and 23.xxx settings which when we choose means the monitor will only show a still. Which normally indicates and incompatible mode.
    At the moment we are using the 1080i setting and it looks pretty good but "appears" to be a little motion blurred which i assume is the incorrect interlacing setting.
    Any help would be much appreciated.. and do let me know you need more information.
    Cheers
    Rob

    Thanks for the reply guys much apprecaited.. the monitory we are using is a Sony LMD2450. Which I hope is a nice monitor as it cost enough and lets us view at full pixels. We are connected to it using HD-SDI
    http://www.sony.co.uk/biz/view/ShowProduct.action?product=LMD-2450W
    Glad we have the correct setting for Blackmagic and think any slight weirdness in movement was us just expecting there to be some because of the setting.
    Sorry to ask another question but is there any good tutorials about setting up a monitor to work with FCP eg. for Colour Correction applications...
    Cheers and thanks again
    Rob

  • Which display settings for using projector

    Hi Everybody,
    I am using a projector to show a QT movie that is widescreen.
    How do I determine which display setting to use to maintain the wideness if possible. There are so many...
    THe screen is really more of a 4:3 screen. Tallish and vertical.
    Thanks,
    Al

    I use the 16:10 and the 1440 x 900 setting.
    Wonderful to look at... except for some of the creepy looking bad guys.

  • DVD Compressor setting for use in DVD Studio Pro

    I'm trying to create a playable dvd that has using dvd studio pro. However I want to compress the .mov file using compressor first. I've tried several setting, ut I get the same blurry text and graphic results.
    What's the best setting for a hi quality dvd, the same quality has professional dvds.
    Thanks in advance for any help.

    The best one you'll get with Compressor is DVD Best Quality 90 mins. Tweak it any higher than that and you run the risk of drives refusing to play the disc.
    You can't make it look like a professional DVD because the pros don't use DVD Studio Pro. They use significantly more expensive software and encoding hardware, and the discs are replicated, not burned.

  • Permanantly removing vendor from sap which are set for deletion flag

    Hai Pals,
    I want step by step explanation of how to delete vendors which are marked for deletion.I have check the forum & got only transaction code SARA & Archiving object FI_ACCPAYB.I dont know hau to proceed further please give some explanation to proceed further

    Archiving is done from transaction SARA.
    Enter the object, then hit enter.
    to get the object specific steps, these are process from top to down. 
    You have to do the customizing first, which can be done from SARA transaction as well.
    Follow the link to the very details.
    See the menu on the left, expecially the first knot "Introduction to Data Archiving (CA-ARC)"
    http://help.sap.com/saphelp_erp2005/helpdata/en/ba/4b68b8327911d2a25c0000e8a5f24f/frameset.htm

  • Itunes keeps telling me "the registry setting for importing and exporting and burning cds are missing" reinstall itunes.  I have reinstalled itunes about 30 times and still get the same message.  I do not have another cd burning software loan

    I keep getting the message "the registry settings for importing and exporting and burning cds are missing. Please reinstall itunes. This may be the result of other cd burining software on your computer"  I do not have another CD burning software on my computer and have reinstalled itunes about 30 times and still get the same message and am not able to burn CDs.  All of my drivers and firmware are up to date. Please help

    Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
    The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems?

  • Now that iDVD is discontinued what can I use alongside iMovie to burn a dvd

    I have managed to transfer all my old home videos onto my computer but the instructions are to transfer them from iMovie directly into iDVD to burn them to disc. I dont have iDVD installed and have tried various other methods but cannot make a copy. I have installed miDVD and have managed to burn a dvd using this but there is no sound. Please help but keep it simple as I am not very good with computer jargon. Thanks.

    I don't know your iMac model number, you didn't supply it. But if it shipped with an OS X version prior to Lion, you should have 2 grey DVDs. The 2nd grey DVD may have included iLife applications.
    Otherwise, the only source would be a retail iLife 011 DVD. You may be able to find one on eBay.

  • I have just got a new macbook pro and am trying to sync my iTunes, however i have an old acount that i have all my music on and a new account which is set for only me which is now on my phone and the main account on my laptop. help please

    with my purchase of the new macbook pro i have been unable to upload any music from my iphone or any other details except from my pictures. I tried to set up the icloud but i am having difficulties doing so as all my music on my phone is under an old shared account and on my laptop i have a new account specifically for me which has also been newly uploaded onto my phone with the £70 voucher.

    From Here   http://support.apple.com/kb/HE37
    I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

  • Which Audio Interface for Me?

    Okay, I have decided to make the switch from my iMic and a mixer to an audio interface that has two inputs so I can record two channels at once. I may be using external pre's at times so it must have line-in's. Also, right now I am using a Rev. A Mac Mini, but soon I will be upgrading to a Mac Intel Book to be named later. I will mainly use this to record acoustic guitar, vocals, bass, and ocassionally drums (using a mixer to sub mix and then into the audio interface). I will do everything for my own home enjoyment so my standards are real high. Here are the possibilities I have come up with from the Sweetwater catalog in my price range ($150 - $300):
    1.)Lexicon Alpha (this is a new model) or Lambda - both are USB
    2.)Tapco Link.USB
    3.)Makie Spike (USB)
    4.)Alesis io I 14 (what is this thing USB or Firewire?)
    5.)M-Audio Firewire 410
    6.)Presonus Firebox
    It doesn't matter to me if it is USB or Firewire, I guess my biggest requirement is the ability to use the line-in for external pre's. Thanks for any help!

    I guess you guys mean that I could pan channel one
    left and two right and then into the iMic?
    That's correct
    There are two jacks on the iMic I see,
    No, one of those is the input, one of those is the output (you could plug headphoines into that one)
    but I guess I don't
    understand how I can have those on two seperate
    channels in garageband.
    That's the easy part. Create a New Basic Track and click the "I"nfo button, then set the input popUp menu to "Channel 1 (Mono)". Create a second New Basic Track and set it's Input popUp menu to "Channel 2 (mono)". Make sure the little red Record Enable buttons are on for both track and hit record. You'll be recording 2 tracks.
    Also, I think one thing for
    me as that my mixer didn't have in/outs on each
    channel so I can use external pre's.
    Okay, like I said, I would never dissuade someone from getting a better interface, and the iMic is nowhere near the Top Of The Line...
    I use PreSonus' FirePod and for the year+ that I've had it I've been thrilled with it. I have no person al experience with the FireBox, but PreSonus has an excellent reputation so if it has the features you want, I'd expect it to be a great product.
    Finally, I guess I should say that I'm using
    Garageband now, but had thought about Logic Express
    in the future. Thanks for the help
    Any of the interfaces you listed should work fine with whatever software you want to use (the compatibility question is not really with the software, but rather the hardware. If the interface works on your Mac then it will work with GB and Logic).
    Hope that helps --HangTime [Will Compute for Food] B-|>

  • Which fields taken for use in CD-Text info?

    I've been burning CDs with CD-Text using Toast for a while, and I have a very exact way how I want the track info to appear on my CD-Rs. I've upgraded from Panther to Tiger, and now that the Include CD-Text option is available, which fields, exactly, does it take from, and how does it arrange them when I see them when I insert an audio CD-R into my CD player? Thanks very much. Peace.

    You're right, but I'm a little under the gun with my employer to get something out there, asap, and I unfortunately have a full time job that doesn't allow me to commit a block of time to finish the text in one shot.

  • Help - Recording audio interviews for use as podcasts

    Hi there -
    I'm looking for guidance on getting started with recording audio interviews and then putting on the net as a podcast. Key questions are:
    - What is the best equipment to use when starting, in terms of microphones etc.?
    etc.(The interviews will be mostly in person, but some may be over skype)
    - What software should I use to create podcast? (i have garageband & final vinyl on my macbook)
    - What are the 'watch-outs'/most common mistakes I should watch for?
    Any help much appreciated.

    These two pages offer some suggestions:
    http://www.bulletsandbones.com/GB/FAQPages/Interfaces.html
    http://www.bulletsandbones.com/GB/Microphones.html
    The author of these pages posts in the GarageBand Forum as do others who use it, and it's a good place to ask questions about this.
    As to creating a podcast, once you have made the MP3 audio files (in GarageBand or an audio editor such as Audacity) my recommendation would be Podcast Maker which will write the feed for you and upload it and the files to a server; it writes a good feed and isn't given to causing problems. iWeb can also make a podcast, together with an associated web page, though you may have less control over how it's done.

Maybe you are looking for

  • File receiver adapter with the same filename than sender

    Hi guys, I am experiencing a problem when I use the <b>Adapter Specific Message Properties</b> to be able to receive a file with the same name as the sender. I've been following the example of Michal Krawczyk (XI: The same filename from a sender to a

  • Additional field in ME2L and ME2M

    Hi, Following is the requirement, would it be possible to add the field LABNR of table MEPO1334 in these reports ? We use this field in the Purchase Order with the order acknowledgement number and it makes sense to show it also in a query as an overv

  • ASMA question.

    Hi, I am working on a simple File to File interface without design objects i.e. tunneling interface. The intension of the scenario is to pick up a file from source and put it in the target directory. My question is do we have to use Adapter – specifi

  • Error message 'Could not save to path /Users/yogasail/Documents/' appeared and cannot save files?

    I have an iMac 21.5 running OS X 10.9.4:Processor  2.7 GHz Intel Core i5:Memory  8 GB 1600 MHz DDR3. I have suddenly got this message every time I try to save a file -'Could not save to path /Users/yogasail/Documents/Emma/xxxx.rtf. Choose a different

  • HT4060 ipad 3 taking over 6 hours to fully charge

    my ipad and my partners ipad are taking a very very long time to charge. over 6 hours.  we are using the 10w ac adapter.  is this right? ive heard from everone it shouldnt take this long