Which Barcode reader do you like best?

I've looked at the apps and the reviews, but I was hoping that someone could chime in on the barcode reading apps that may have been using them a while and had better feedback then that listed in the reviews. Any suggestions and why?
Thanks

Hey Toshi,
I don't know why but your last post reminded me of this
Internet-Enabled Cat Feeder ...powered by Cisco
http://www.youtube.com/watch?v=kSCC2Z96s3g
Cheers!
Rob
PS: any coffee will do...even Instant if I really need a fix ...hahaha!

Similar Messages

  • Off topic! Which snare do you like best for recording?

    Hi,
    I'm doing some drum recordings using a KM184 (sometimes CS1000) and an e904 bottom side of the snare (phase flipped). I didn't like the sound of the e904 on top so I decided to choose a KM184 which sounds nice.
    Now: Whats your experience, which snares and which drumheads do you like best for recording Rock, Pop, Funk?
    Any feedback appreciated.
    Eddie

    -how much space does it take?
    depends on how long they are.
    -Will it cause problems?
    no, y would they make them if they cause probs?
    -is it ok if i downlaod it at my grandmas place, then
    at home i wont have a copy of the podcast?
    as long as its not on auto sync you should be fine.
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • Which topic categories would you like to subscribe to? NO WAY TO ANSWER THIS

    In setting my options. I come to this question: "Which topic categories would you like to subscribe to?"
    I also see a system-defined answer: "No topics defined".
    And there is no drop-down list or text box, so so no visible way to set up some topics.
    So - How do I define a topic or list of topics?

    It's FireFox, when I set options for receving posts from the support site (like whether or not I want to receive a digest or individual e-mails). This particular aption is supposedly set be responding to the question "Which topic categories would you like to subscribe to?"
    I also see a system-defined answer: "No topics defined".
    And there is no drop-down list or text box, so so no visible wat to set up
    some topics.
    So - How do I define a topic or list of topics?

  • SURVEY: What pre-installed app you like the most in our z10.

    hi everyone,
    please tell us Which pre-installed app you like the most in our z10.
    Give a like.
    1. please click the Like Button below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?
    " which solved it for you

    Among your list I'd get rid of:
    Toshiba Power Saver (I keep my Power Plan at Max Performance, its a desktop substitute and I've a tablet)
    Toshiba Volume Regulator (I did not find any difference in keeping this or not)
    Toshiba HDD SSD Alert (This annoyed me but turned out the drive is fine, and I keep my files backed up)
    Message Center (I dont want unsolicited messages)
    Toshiba ReelTime (This is the equivalent of "Previous" in Android Honeycomb and ICS, but I dont like it here)
    Toshiba Service Station (Helpful with drivers but heard a few laptops bricked by BIOS updates although reports arent proven)
    Toshiba App Place (I dont buy apps)
    Services:
    TMachInfo (Who needs this?)
    Toshiba Power Saver (I keep my power plan at maximum performance and my battery is out
    Toshiba HDD SSD Alert Service (My files are backed up so the HDD may crash whenever he decides
    taisregispinger (This has done its job the first time you went online, it reports its first boot to Toshiba)
    Enjoy.

  • I want to lock out the PC keyboard while allowing barcode reader input

    I have an application that uses a barcode reader to enter part numbers.  I have been asked by manglement if I can lock-out the keyboard to prevent the users from typing in the part numbers (too prone to error in typing).  As the barcode reader is a separate USB port from the keyboard, is there a way to identify the keyboard port and disable it programmatically?

    Since your barcode reader is USB, you may have the ability to set it up as a COM port.  Several USB readers will either behave as a keyboard or a COM port.  You would then have to modify your software to look at the COM Port.  You can change the control to an indicator and the user will not be able to do anything.
    The other option, which is what I typically do, is to add prefix and suffix characters to the barcode scanner.  I pick a prefix that corresponds to a LabVIEW Key Navigation settign to set focus to the control.  This way, whenever the barcode scanner scans, the control is automatically highlighted and the barcode fills end.  I usually use a suffix of the ENTER key so the data is entered.
    This way, you can hide your control off-screen so users cannot see it.  Use an indicator on-screen.  You can even set the off-screen control to be skipped while tabbing.  The other nice thing with the prefix is I can simulate the barcode with the keyboard by using the special key navigation sequence.  This is not 100% tamper-proof, but most operators aren't going to know what you are doing to skip the barcode reader unless you show them.

  • Podcast-which one do you like the best?

    Hello, i want to sometime downlaod a podcast...but i will like to know which one you like.
    -i like comedies, but no swearing, and unappropiate stuff for people under 8, i will like to let my couasins see it.
    -how much space does it take?
    -Will it cause problems?
    -is it ok if i downlaod it at my grandmas place, then at home i wont have a copy of the podcast?
    Thx
    Chris.

    -how much space does it take?
    depends on how long they are.
    -Will it cause problems?
    no, y would they make them if they cause probs?
    -is it ok if i downlaod it at my grandmas place, then
    at home i wont have a copy of the podcast?
    as long as its not on auto sync you should be fine.
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • Upgraded to 11.3.1 now can't open library. Won't read. I have an older iMac (2008). Message I get is: cannot be read because was created by newer version of iTunes. Would you like to download iTunes now?' ... so I do and it fixes nothing. OS 10.6.8

    Upgraded to 11.3.1 now can't open library. Won't read. I have an older iMac (2008). Message I get is: cannot be read because was created by newer version of iTunes. Would you like to download iTunes now?' ... so I do and it fixes nothing. Same message again. OS is 10.6.8.

    Thanks again. The option thing got me further than I've gotten thus far but when I went to choose a library I got that same message.
    I do have options. I have 2 iMacs. I can still access my music through 'sharing' and download it onto my newer iMac. Trouble is it doesn't have a CD port and I like to burn. From what I've read about their new Mac portable CD/DVD drive, it's shaky at best. Incidentally, do you know of any drives that work well with Macs and cost less than $89.00?
    I've figured out I can download a previous library from my old Mac then upload it from the new one which should put me back in business, but what do I do with the corrupt one that's there now, just trash it? Also, when I do the option key my other choice is Create A New Library. Should I do that and put the good previous library into it?
    Thanks a million, I really appreciate your time. I'm an old fogey and computers often mystify me, especially when they lock me out of things for no apparent reason.

  • How do you identify a key events source (std keyboard or a USB barcode reader emulating keyboard)?

    I have attached a USB barcode reader which essentially emulates a USB
    keyboard. Having looked through the VC++ V5.0 documentation and some SDK
    documents that I have, I could not find a library function that identifies
    what device sourced the keyboad event.
    Does know if this is possible ? Anyone have any ideas ?
    Thanks.

    If you over ride the "CWnd:reTranslateMessage" function you'll be able to trap keyboard messages.
    ex:
    BOOL CTestexecDlg:reTranslateMessage(MSG* pMsg)
    if (pMsg->message == WM_KEYDOWN && (pMsg->wParam == 13 || pMsg->wParam == VK_ESCAPE))
    // Enter or escape key was pressed; return TRUE to stop default handling
    return TRUE;
    if (pMsg->message == WM_KEYDOWN && pMsg->wParam == 0x30)
    BringWindowToTop( );
    return TRUE;
    if (pMsg->message == WM_KEYDOWN && pMsg->wParam == 0x31 && m_DisplayObject1 != NULL)
    // Enter or escape key was pressed; return TRUE to stop default handling
    m_DisplayObject1->SetWindowToTop( );
    return TRUE;
    if (pMsg->message == WM_KEYDOWN && pMsg->wPa
    ram == 0x32 && m_DisplayObject2 != NULL)
    // Enter or escape key was pressed; return TRUE to stop default handling
    m_DisplayObject2->SetWindowToTop( );
    return TRUE;
    if (pMsg->message == WM_KEYDOWN && pMsg->wParam == 0x33 && m_DisplayObject2 != NULL)
    // Enter or escape key was pressed; return TRUE to stop default handling
    m_DisplayObject3->SetWindowToTop( );
    return TRUE;
    return CDialog:reTranslateMessage(pMsg);
    Steve

  • Hi, i got a iphone 4s in AU, but it was locked, would you like to help me to check which carrier is this?

    hi, i got a iphone 4s in AU, but it was locked, would you like to help me to check which carrier is this?
    <Edited By Host>

    Where did you buy the iPhone? What does it say
    when you look at Settings=>General=>Carrier?
    Ask the seller what wireless carrier the iPhone is
    locked to.

  • Which encoder do you like to use?

    Hi,
    I need to do some high quality encoding and would like to hear some opinions about which encoder you like to use.
    Compressor seems pretty good, but there must be some reason the competition is able to charge more for their offerings.
    BitVice?
    MegaPEG.X?
    Hueris MPEG Pro?
    What other options are there (besides dedicated hardware encoders) ?
    Many thanks.

    Hi Phillip - don't get me wrong, Compressor is just fine for a lot of encoding work, but when I go back to thinking about v1 it just wasn't reliable for encoding going to replication - there were far too many glitches and anomalies in the data it produced, notably fairly large bitrate spikes which caused the playback to falter. When you are needing to encode reliably and get things out of the door fast, this kind of issue is way too serious...
    On top of that the standard output of compressor was milky - fairly washed out look which needed you to tweak the gamma setting. Whilst easy enough to do, it was another set of mouse clicks.
    Finally, Compressor was not very good at CBR encoding - it varied too much from the bitrate for my liking.
    Some of these issues can be seen in BitVice - I occasionally do still get spikes in the encode, but it is very rare. The output from the default settings is very good, and with the digital noise reduction tool I can get a super smooth looking encode from most material. The reliability of this makes BitVice a very good option.
    Procoder is PC based, which introduces a new dimension. In most tests, the CPU on my PC will crunch numbers happily all day, and fast. The Mac is far better at a lot of things, but in raw grunt my PC is quicker (I need a new Mac, obviously!) This means I can use FCP to be creative, and pass the footage to the PC for encoding, leaving the Mac free to continue what I was doing. Procoder is also an excellent encoder and the output from it is rock steady and reliable, time after time. I happen to like the look of the finished MPEG, too - very clear and crisp and very seldom any glitches. If I set it to CBR encode, that's what I get. It seldom varies from the min and max I give it for VBR too, and there are plenty of post production filters to iron out glitches I miss at editing. It also does a pretty good standards conversion when I need it, certainly far superior to QT based tools I have thus far used (not including the Nattress filters). In short, it knocks spots off Compressor for the way I work.
    So, speed, convenience, reliability and quality of output - each of these are important and relying on Compressor only doesn't give me the options I like to have. Compressor 2 is a good enough encoder, but have a look on the compressor forum to see what the issues are! Then head over to Innobits.com and check out the BitVice forums... I have to say that Compressor 2 is a very different beast to v1, and much, much better than it's predecessor, IMO (although not without it's problems).
    The thing is, if you are happy with what you are seeing from your encoder and like the way it works then there's no need to change. If you want to have alternative options, or your work flow is a bit different, then perhaps Compressor alone isn't enough.
    Quite apart from the technical differences I did create a disc with encodes from different softwares and play it to some colleagues who don't do video work. I asked them to compare the image with the original footage and say which is closest, then to say which image was 'better' to look at. Every time Procoder came top, BitVice second and Compressor last. I guess I ought to repeat this very unscientific and largely unreliable method and include MegaPEG.X in it now, too. I was only hoping for a bit of a straw poll on what an 'average' consumer might think was a good picture, I wasn't looking at in-depth comparisons. It was, however, good to get a range of opinions from a pretty unbiased group and confirmed my own thoughts about the output from the encoders.

  • I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one?

    I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one? I try to install but get the error" download error". As far as i know I'm using Adobe Java 7. None of my CS5 suite works anymore............and i really dont want to upgrade to a monthly cloud service fee as i hate this policy with a passion.

    This goes for Dreamweaver CC on Mavericks!!!!! THANK YOU!
    I couldn't launch Dreamweaver CC. An error told me to install "java se 6 runtime". But when I clicked  OK I got another error telling me there is a network problem! I found this forum post on CS6 products, so I tried the download link, installed java 6 and presto, it worked! Thanks!

  • I cannot open iTunes.  I get a message that says "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"  I downloaded it and it and I continue to get the same message.  How

    I cannot open iTunes.  I get a message that says "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"
    I downloaded it and it and I continue to get the same message.
    How do I fix this?    Thanks,  Dee

    Upgrade iTunes to the latest version. It should be 10.5.3.

  • When i try to open itunes on my mac a message comes up saying The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"

    When i try to open itunes, a message pops up saying "The file “iTunes Library” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?." I have tried downloading the newest version of itunes but it still won't open. What should i do?

    Update your copy of itunes to the current version.

  • TS1627 I cannot open iTunes. This is the message I get:  "The file iTunes library .itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"  I did a download and it is up to date, but still won't open

    I cannot open iTunes. This is the message I get:  "The file iTunes library .itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"  I did a download and it is up to date, but still won't open.  HELP

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • I receive the message: The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?

    I receive the message:
    The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?
    I've ALREADY downloaded AND installed the new iTunes.
    ITunes WILL NOT launch.

    Hello, hillbent. 
    Thank you for the question.  If you have verified that iTunes 11.1 is installed, you will need to rebuild your iTunes library file.  Below, I have included the article that walks you through this process.  Start with the section labeled Re-creating the iTunes Library file.
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/ht1451
    Cheers,
    Jason H.

Maybe you are looking for