Which bios savior for the k8n neo chip???

I'm not sure which chip is in the k8n neo platinum so I hope someone knows....here's the link to the bios saviors http://www.frozencpu.com/cgi-bin/frozencpu/scan/se=Electronics/se=IOSS%20BIOS%20Savior/mp=menu_search.html

i have an ioss rd1-pmc4 bios saviour so i popt the bios chip out of my board and the chips look identical. i did not try it in though as i only got my cpu and motherboard the other day.will try soon

Similar Messages

Is a 24 pin atx cable needed for the k8n neo 4 platinum?

i have a Thermaltake Silent Purepower 480 Watt PSU. i am thinking about upgrading from an msi k7n2 delta to the k8n neo 4 platinum motherboard.
if i do this, do i need this adaptor cable?

Quote from: Deathstalker on 08-June-05, 22:18:54
ryansebiz,
That Power Supply has the 24 Pin Cable as part of its cables. You do not need any adapters.
Take Care,
Richard
thanks richard, you saved me $11 on a cable adaptor

Better HSF for the K8N Neo Plat?

I have been looking at a few HSF's for about a month now, and I'm still not sure if I will buy it now or not but I will sooner or later, but these are the two that I have seen suggested the most, and seem to be the best (that don't sound like a vacuum):
Zalman 7000-CU= $38.50
or
Thermalright XP-90= $39.99
and keep in mind that the XP-90 doesn't come with a fan so that will be an extra $5.
So which one should I get?
Specs in sig
EDIT: Also if you don't like either one of these, could you suggest an alternative.
Thanks

I have the copper/aluminum Zalman CNPS7000A-ALCU Pure Copper/Pure Aluminum CPU Cooler which ihas lowered my temp greatly. It's only $34.99 with free 2nd day shipping from ZipZoomFly.com. They have great prices and you can't beat the shipping.
http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=371002
Just note that you will have to remove the backplate from the Neo motherboard but if you use a plastic spatula and hair dryer it comes off very easily. Just keep firm but not hard pressure lift on the plate while using hair dryer. I was a little heavy handed and it made a sickening sound when it came off. Nothing bad to board as it was only the sticky stuff letting go.
Again, great HSF especially if you use Artic Silver5 with it. I connected mine to existing motherboard connection and used the included speed controller to slow down my 120mm input fan a little.
Rick
MSI K8N Neo Platinum (BIOS 1.5B6) 231 @ 10x HTF 3x
Athlon 64 3200+ w/Zalman CNPS7000A-ALCU @ 1.57V
1GB Corsair XMS TWINX PC3200C2PT Memory (Slot 1 & 3)
(3-3-3-11, 2T) @ 2.8V
2x160 RAID 0
1x160 Maxtor IDE 133 (Secondary Slave)
NEC 3500a DVD Dual Layer 16x (Primary Master)
NEC 2510a DVD 8x (Primary Slave)
ATI AIW Radeon 9600XT
HSF on Nvidia/NB (29c)
Antec TruePower 550 = +3.3V@32A, +5V@40A, +12V@24A

It's my PSU enough for the K8N Neo 4 Plat. Sli

I have an Nspire PSU 450W
+12 25A
+5 40A
+3.3 28A
It is enough for...
K8N Neo 4 Platinum Sli
AMD Athlon 64 3500+
MSI NX6600GT-TD128E
PCI Video Capture card
Zalman Ultra Quiet CPU Cooler
HD SeaGate Barracuda 120GB
CD-ROM
DVD/CD-RW
??????????????????????????

Dude, if you're even thinking about SLI on your new K8N Neo 4 Platinum SLI mobo, you should forget about that Aspire PSU (unless you want to fry everything in your Rig) and bite the bullet and get a PC Power and Cooling Turbo-Cool® 510 SLI (510W) http://www.frozencpu.com/psu-151.html.

New Bios For MSI K8N Neo Platinum [ 1.55]

NEW BIOS FOR MSI K8N Neo Platinum !!!!
BIOS 1.55 FOR K8N
AND CLICK
Apothikeusi/Emfanisi (Greek Language )
Your CPU temperature is in the safe range. Please rest assured. If you are
willing to, would you please flash BIOS to the version 1.55 verifying? We
send it by attachment. As to how to flash BIOS, please refer to the word file
in the attached file. Please kindly inform us of the results. Thanks for your
cooperation.
In addition, please enter BIOS to load optimized defaults after flashing BIOS.
Please feel free to let us know if you still have any further issues or inquiries.
Best regards,
MSI Technical Support

OMG !!!!
Something is really weird about this bios !!!!
I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
OMG OMG....
If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
Really strange guys.I thought 230 was my memory limit....
Gonna try higher and let you know.
P.S. this bios seems to like Kinston Ram....Value at least

LiveUpdate broke the bios on a MSI k8n neo v2.0, need bios and recovery files.

LiveUpdate broke the bios on a MSI k8n neo v2.0, it need bios and recovery files. I do not know the serial number. The ERP is 070. Its a "k8n neo v2.0" "ms - 7030 ver: 20c" mainboard. I don't know the previous bios version. The computer prompts for a recovery disk during an AWARD BootBlock BIOS v1.0 initialization.
Thank You.

Here it is
[K8N Neo V2.0 series ==> 601-7030-070/080, BIOS 5.xx]
Sign On: K8N Neo V2.0 Series W7030NMS V5.4 031506 14:55:37

Does the K8N Neo-FSR support the mobile chip out of the box

just like the titles says
does the K8N Neo-FSR support the mobile clawhammer out of the box.?
if not what bios would i need,. or can anyone confirm what bios is being shipped on these motheboards now.

Jim,
From what I've read, there are updates to the memory controller and the addition of SSE3 support to Venice. It's also reported to have some performance improvement over Winchester and Newcastle. It will use a default 1.4v VCore. Hopefully, It's power comsumption is on the same order as the 90nm Winchester's or less.
If Monarch is shipping the combo with available Bios, you can bet they work. I'm thinking of giving them a call on mine to transfer the 2yr warranty to my youngest daughter (it's a graduation gift) and to discuss the Bios 3.3 vs. 3.3B3 issues. They shipped mine with B3, and I think there may be a reason. The B3 works great with a simple WPCRSET patch of the CAS to RAS Delay. That's why you see those memory settings working on mine.
On the "boxed" vs. OEM, I think buying the combo with warranty and a better heatsink is a much better choice. Use the Venus 7+ in my specs. It's low profile, all copper, and one of the highest rated. Monarch has it in their configurator. It's as quiet as AMD's. Monarch also gives you a 30 day free return with a Fedex prepaid shipping label in the package.
Danno

Bios from my Msi k8n Neo Platinum (socket 754)

Wich is the last beta bios from my Msi k8n Neo Platinum (socket 754) ?
And where download?
Thanks

A thread here , from when 1.56 appeared:
MSI K8N Neo Plat Beta Bios 1.56
and when 1.55 appeared:
New Bios For MSI K8N Neo Platinum [ 1.55]
Seems to me that the 1.5x series were focused on chipset timings and ram .
Another thing is that i can boot from a usb pen with this one .(never got it to work with others) .
Beta bioses don't come with a changelog , they leak out . So any complete
list of changes is not possible to provide.

Looking for a bios update for the Acer aspire M1641 Motherboard

Looking for a bios update for the Acer aspire M1641 Motherboard All I could find was one for the acer aspire M1640 Which has a different board number but is as close as i can get to it. Is this the right one? If not would anyone be able to point me in the right direction? Thanks.

@IronFly: The old website is always useful!

MOVED: Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

This topic has been moved to AMD64 nVidia Based board.
Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

If you want SSE3 support and you do not overclock, Bios 1.4 is the only one officially available (1.41beta is not official).
Try to upgrade to 1.4 and see it for yourself, do the upgrade with floppy in DOS so that you can save your old Bios.
I would rather wait till mid June when a less troublesome new bios is suppose to be availabe for NEO4 MBs.

Need help Flashing to MSI's new Bios revsion for the MSI GT70 0NC

MSI just came out with a new bios revision for the MSI GT70 0NC I was wanting to know which bios revision is for my MSI notebook?

Hello again my friend, yes it's me again. Here's a screenshot from our last bios flash you helped me out with. Remember I have Windows 8 and still used the MSI flashing tool because I have the older MSI GT70 0NC So I was wanting to know which of the new ones I can obtain and download for my notebook again.

Bios Settings For MSI K8N Neo4/SLI Platinum MB

Hello all... Has anyone came up with the best and most stable bios settings for the MSI K8N Neo4/SLI Platinum motherboard yet. Specifically under the CPU and Memory menus.
If anyone has seen any, please post them. or post a link.
Thanks
DaaDoctor

Well that depends on the installed CPU and memory, doesnt it? So I find that question kinda odd.
One thing though: Dont use Cool n Quiet.

I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones

I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones
Any clue, how i can add a mail account to apple mail app, but with separate password / pin to open it.
Years ago there was a program called mail switcher which added this functionality, but thats gone.
cheers
Tom

They would have to be logged in as separate users in order not to see your account in Mail. Whatever accounts put in Mail under your account will show up. All mail accounts usually have there own user and password. The only thing you can do is to remove the password from Keychain and take the account offline so you don't keep getting prompts for passwords each time it checks for mail.
Not a great solution.
Best way is to give the other user their own user account with their own mail and enable fast user swithcing to log between the different users if all access the computer frequently.

Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it a

Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it actually says not moblie network available, when everyone else in my family has coverage and are on my plan with iphones. I am missing text messages and dropping calls left and right. This is unacceptable for the cost of this phone and my service. I have did a hard reset etc. What else can I do??

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Where to see activities, which are created for the campaign with target group

Hi
I have created a Communication Method in SPRO -> CRM -> Marketing -> Marketing Planning & Campaign Management -> Campaign Executtion - Define Communication Method : Activity has been configured
Activities are not appearing after creation of campaign with target group.
Where to see activities, which are created for the campaign with target group?
Regards
Hamid

Hello,
alternatively to check table CRMD_ORDERADM_H directly you can use the related transactions search for the campaign:
This should bring all activities generated by the campaign. If this is empty first check the job log of the campaign execution job again:
This gives information if any target group members have business transactions created. If the log does not contain the required information you can debug from SM37. The business transactions (activities, leads, sales orders) are generated from function module CRM_MKTTGGRP_PROC_CREATE.
best regards,
Johannes

Which bios savior for the k8n neo chip???

Similar Messages

Maybe you are looking for