Which book categories have pre-defined thumbnails in iTunes (eg. Science Fiction, Art, Science, etc)?

When you enter certain genres for a given book in iTunes, you get a nice category icon/thumb when sorting by Categories. I've had a pretty decent look around and haven't found a definitive list. One nice feature is fantasy and sci-fi get grouped together. My initial thoughts were that these categories link to those on the iBook store. However, I tried using the iBooks category "Art, Craft & Photography". Now with Sci Fi and Fantasy, the book could have the following:
Science Fiction
Fantasy
When attempting say only the "Photography" category, no nice icon appears. However, if I set the "Art" category, I get a nice Fine Arts icon. The same also happens with Science and Nature. Science has a thumbnail, Nature does not. They appear, grouped, in the iBook store.
I'm curious to know if anyone has a list of exactly which categories iTunes book view supports.
Cheers!

Similar Messages

Message#30079-No valid service categories have been defined in Customizing

I am trying to execute trans. AC03 in External Services Mgmt, and I get the message: Message#30079-No valid service categories have been defined in Customizing
Yet, I believe that I have done all the configuration necessary for External Services Mgmt. Does anyone know what I need to do next?

Hi I assume that 30079 is not a message number but You are using some service category with this number but you should use the standard service categories for the same The following service categories are available in the standard system:
o   ALL      Complete service
o   GRND     Basic services
o   SERV     Services, Purchasing
Messages Numbers can not be that much long.
Lekhram

Custom UME attribute with pre-defined values

All,
Is it possible to define a custom UME attribute which will have pre-defined values so that it appears as dropdown select when the admin creates a user?
Your help is appreciated.
Thanks

Hi Aakash,
I am not a software developer so I cannot really give you details. I can point you to our documentation: [SAP NetWeaver Developer's Guide|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/8b/0b674240449c60e10000000a1550b0/frameset.htm]
This guide should point you in the right direction. The UME has a public API with which you access the attributes in question programmatically. What you do from there depends what you as a programmer want to do.
-Michael

I have put an album into itunes

I have put an album into iTunes. The album art shows in the get info box. But the album art will not display in the artwork box by the track listings. Please help.

Thanks for your reply,but i don't know what you mean when you say coverview. I can't find coverview in any of the menus!

ITunes not Finding Album Art (Which Does Exist)

For reasons that I have been unable to ascertain, iTunes cannot find album art for some albums that I have ripped. The art does exist on iTunes--I've done a search and checked. The song text matches; the album title appears to match; but iTunes politely informs me "Artwork could not be found."
This is not due to the fact that these are songs I have ripped myself; iTunes has found plenty of other album art for tunes I've ripped myself. Something else is going on. A couple of examples for folks to chew on:
Godzilla - Blue Öyster Cult - Don't Fear The Reaper: The Best Of Blue Öyster Cult
Mirror In The Bathroom - The English Beat - Beat This! The Best of the English Beat
Freeze-Frame - J. Geils Band - Freeze Frame
The Healer - John Lee Hooker - The Healer
There are plenty of others; that's just a sample. Any advice would be appreciated.
Doug
iPhone

Hello,
so there's no way of adding new covers to iTunes by drag and drop to the left bottom box??? I have to add the cover with +I only?
I've tried yesterday to add the covers with a simlpe drag and drop into the useful bottom-left box.... It didn't work... C'mon Apple!
It kinda *****...
PS: Adding covers via the new "import cover from apple store" fonction doesn't work as well. Youth bugs I presume
Macmini , ibook 12 Mac OS X (10.4.7)

Which Address Book names have a picture?

Is there any way to easily see which cards in Address Book already have a picture? I was hoping that the tiny icon in the Name column of Card and Column view would change if you already had a picture attached to that card. Some visual indication, like the indicators for whether the card is a person, a company, or My Card. Has anyone found a way to do that?
Failing that, is there any way to persuade a Smart Group to indicate that a Card includes Picture? Or that a Card doesn't include a Picture?
Am I missing some easy way to do this? Haven't found it searching the forum, nor via Google.

If you run this script with Script Editor it will list in the Result pane the contacts with a picture. Remove the "not" from the line "if (count of image of APerson) is not 0 then" if you would prefer a list of contacts without a picture.
AK
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "Address Book"
set HeadnShoulders to {}
repeat with APerson in people
if (count of image of APerson) is not 0 then
set HeadnShoulders to HeadnShoulders & name of APerson
end if
end repeat
HeadnShoulders
end tell</pre>

I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my came

I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my camera. Is there any other way i can install this on my camera without using the provided cd or buying the software again?

That doesn't help the user with the serial code though.
There has to be some kind of code somewhere within the package. The disk itself does not contain one. You can look here for help with finding your serial number:
Find your serial number quickly

In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel. I can boot up and use for about 5 minutes before the mouse freezes. I believe something is overheating. What would that be - so I can have repairs done? The

In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel. I can boot up and use for about 5 minutes before the mouse freezes. I believe something is
overheating. What would that be - so I can have repairs done? The machine is the Digital Audio version, M7627LL/A and Serial Number XB******KXQ.
<Edited By Host>

Hello USME,
'Tis a common problem on old Macs.
Do as Allan says: open the door and blow out all the dust bunnies. Canned air from Wal-Mart or Radio Shack can be handy (though sort of expensive) especially for blowing through the back of the power supply. A cool Mac is a happy Mac.
Be sure your Mac can breathe. The air intake is on the bottom of the case, so be sure a deep pile rug or too many papers on your desk are not blocking the air supply.
Feel the power supply and the processor with your hand. They should be warm but not hot; if you have to move your hand away, that's too hot!
Check the fan on the power supply, and on the processor if it has one. Take a flashlight and peer in the back of the (Mac) case through the grille; make sure the fan is turning. If it's not, the power supply won't work for long.
Fans are not considered serviceable, though they will succumb to mechanics of determination. A CPU fan is easy and straightforward.
A fan replacement will not cure an already damaged power supply; the PS may already be done for. Used power supplies for a DA are hard to come by, and not especially cheap when found (c.$50). An entire working DA or Quicksilver may often be found for under $100 on eBay, and swapping in your HD is easy and simple... this might be cheaper and more expeditious than repairing an expired DA. Replacing a power supply is fairly easy, but it's a nuisance and requires a 2mm Allen head wrench in addition to the usual #2 Phillips head screwdriver.
In my experience, power supplies and CPUs are about equally likely to fail. There are a few other possibilities, but they are not nearly so common.
Good luck!... Jon

Hi All, I recently bought a Mac Book Pro and transferred all my photos from my hard drive onto the Mac. I realised that there were some folders which didn't have the camera information embedded in the files and these files refuse to open on iPhoto. HELP!!

Hi All, I recently bought a Mac Book Pro and transferred all my photos from my hard drive onto the Mac. I realised that there were some folders which didn't have the camera information embedded in the files and these files refuse to open on iPhoto. I know that the folders that have the problem were not transferred to the hard drive via a photo transfer application (I have a Canon camera) but I simply copied them out of the photo card and onto my old PC.
Is there some way I can open these pictures on my Mac? They work fine on a PC.

Thanks for your reply.
The files don't open in preview either. In preview I get the error message 'The file "xxxx_xxx.jpg" could not be opened. It may be damaged or use a file format that Preview doesn't recognize'. The folders with these un-openable pictures do not even get imported into iPhoto. When I try to import them I get an error message about the files being unreadable.
The color profile information on the un-openable files is not visible but I see that all the other files from my old drive are RGB.

Hi, I would like to copy my photos (from iphoto) and movies (from i movie) from my Mac book air to my imac in which I also have iphoto and imovie with photos and movies. My goal is to have a unique source in my imac for my photos and movies. Thanks .

Hi,
I would like to copy my photos (from iphoto) and movies (from i movie) from my Mac book air to my imac in which I also have iphoto and imovie with photos and movies.
My goal is to have a unique source of photos and movies in my imac.
Thanks !
Nicolas

As to iPhoto
Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
For iMovie support please post in the iMovie forum
LN

How to use pre-defined scenarios for RosettaNet with XI 3.0

Hi all.
   I am working in Comgroup Shanghai co. ltd. which is partner of SAP China.
   We have a potential customer who use RosettaNet as their Supply Chain EDI system.
   I would like to make a demo for demostrate the pre-defined scenarios for RosettaNet RNIF 2.0 packages.
   Where can I find such guideline ? I have checked the article: implementing RosettaNet with XI 3.0, but it cannot help me.
   Another question is how I can develop my own scenarios for the RNIF standards which are not included in XI RosettaNet business package ?

Hi Andy,
See the instructions below after you installed the RosettaNet STK.
Below given is the sample config for PIP3B2 Scenario. Part I is using STK and Part II is using 2 XI systems.
<b>Part I. Test Using STK</b>
In your XI ID:
1) Define both the parties 1) Shipper(Your Partner) 2) Receiver(Your company) with identifiers like DUNS Number.
2) In ID goto>Tools>Transfer Integration Scenarios from IR-->select the scenario "PIP3B2_Receiver" from the drop down list.
3) Follow the 4 steps in the config wizard.
4) While creating your CC, create it from the channel template delivered with the RosettaNet BP.
   4.1) Specify the URL for STK which should be in the following format
http://<STK Server>:<port>/rosettanet/servlet/listenerServlet?userId=<Party Name>
   4.2)In the location fields, enter your location and your partner location.
In your STK
1) Start the RosettaNet STK.
2) enter the UserID<Partner Name in XI>
3) Select the Test Scenario, 3B2V01.01-AdvanceShipmentNotification-0001-Scenario-Shipper
4) Enter Global Business ID(DUNS Number) and Location ID for both the partners. These fields should be same as in your R/3 Party configuration.
5) Enter the URL as follows:
http://<XI Server:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
If everything is configured correctly as mentioned, you should be able to test your single-action scenario.
<b>Part II Test using another XI System</b>
For these follow the steps above for XI Config.
Configure one XI System as PIP3B2 Shipper using the Scenario "PIP3B2_Shipper" and config wizard as mentioned above.
Configure the other XI as PIP3B2 Receiver using the scenario "PIP3B2_Receiver" and config wizard.
In the Url field, specify the URL as follows:
http://<XI host>:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
Hope this helps.
Regards,
Sam Raju

Issues in creating a Pre-defined filter in Universe

Hello Everyone,
Here is the problem...
The idea is to have a prompt (Prompt1) to allow user select the Input type ..ie."Check Number or Invoice Number". There is the second prompt (Prompt2) which will allow user to input a value. Based on Prompt1 value, the prompt2 input should be evaluated against Check Number object or Invoice Number Object.
This is using a universe based on a BEx query.
Following useful information in the OLAP universe Best practice doc available [here] which Ingo once shared with us [on this forum], I created following pre-defined filter in my universe.
<OPTIONAL><FILTER EXPRESSION="IIF(@Prompt('Select Input type','A',{'Check','Invoice'},mono,free)='Check', [ZFIAP_IS1___F20].[LEVEL01],[ZFIAP_IS1___F46].[LEVEL01])"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Enter Check or Invoice Number','A',,mono,free)"/></CONDITION></FILTER></OPTIONAL>
Where [ZFIAP_IS1___F20].[LEVEL01] = Check Number & [ZFIAP_IS1___F46].[LEVEL01] = Invoice number.
The object is parsing without errors in the universe. But when I use it in my report, the report throws an error " failed to execute with the error Invalid MDX command with " "
I took the MDX statment and tried to run/debug using MDXTEST and could never get it to work with the above objects. It was seen that the filter created in such a way is handled [Measures] object which only accepts Numeric values and not Strings. Where as my Check number and Invoice Number values are strings. The MDx statement is given below.
Has anyone experienced this issue earlier ?
WITH MEMBER [Measures].[4C46B176-CC15-DF11-92,5D,25,C2,A9,6F,0,0] AS ' IIF(Check=Check, [ZFIAP_IS1___F20].[LEVEL01],[ZFIAP_IS1___F46].[LEVEL01]) ' SELECT { [Measures].[4GQZ1D26O6QATUDY32CGL1C38] } ON COLUMNS , NON EMPTY FILTER( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZFIAP_IS1___F93].[LEVEL01].MEMBERS, [ZFIAP_IS1___F94].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F92].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F71].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F55].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F46].[LEVEL01].MEMBERS ), [ZFIAP_IS1___F20].[LEVEL01].MEMBERS ), [Measures].[4C46B176-CC15-DF11-92,5D,25,C2,A9,6F,0,0] = 0000041924670) DIMENSION PROPERTIES [ZFIAP_IS1___F55].[2ZCCNODE01], [ZFIAP_IS1___F55].[2ZCCNODE02], [ZFIAP_IS1___F55].[2ZCCNODE03] ON ROWS FROM [ZFIAP_IS1/QZFIAP_BOUNV2]
Edited by: vaibhav patil on Feb 11, 2010 9:53 PM
Edited by: vaibhav patil on Feb 11, 2010 9:55 PM

Hi,
In fact, what you are requiring is feasible in Microsoft Analysis Services by defining a calculated meaure and a filter using this calculated measure.
Unfortunately, due to MDX restrictions in SAP, it is not possible to do it in universes.
I suggest that you create a range variable on Time to allow the user to only retrieve the dates needed.
You can retrieve all the dates and then apply a filter in Web Intelligence document: this solution might have the disadvantage to retrieve more data than necessary.
Didier

How to export multiple copies reoprts based on parameters and with pre-defined naming

Hi All:
I have a problem of using SSRS 2012, we have multiple clients and they wanted us to deliver the pre-defined excel reports to different branches based on selecting the "branch name" parameter, also they have a naming rule for the excel
report file.
We cannot use the subscription as they need to do it in one batch and upload to an FTP file, therefore we are doing this manually for over 300 reports. Is this a convenient way to generate them in one batch as well as customising their file names?
Thanks a lot for your help.
Cheers
Johnny

Hi JohnnyKahWang,
As per my understanding, there are multiple clients, you want to deliver reports to clients according to branch name parameter, and naming the excel file according to the rule. If that is the case, we can use data-driven subscription to achieve your goal.
Reporting Services provides data-driven subscriptions so that you can customize the distribution of a report based on dynamic subscriber data. Data-driven subscriptions use query results to determine the recipients of the subscription, delivery settings,
and report parameter values. At run time, the report server runs a query to get values used for subscription settings. We can use the Create Data-driven Subscription pages to define the query and assign query values to subscription settings. For detail information,
please refer to the following steps:
1. Open Report Manager, and locate the report for which you want to create a data-driven subscription.
2. Hover over the report, and click the drop-down arrow.
3. In the drop-down menu, click Manage. This opens the General properties page for the report.
4. Select the Subscriptions tab, and then click New Data-driven Subscription.
5. Choose a method of delivery, then select data source for the subscription.
6. Specify a query that retrieves subscriber data like below:
CREATE TABLE Name (
BranchName varchar(20),
ExcelFileName varchar(20),
Email_to varchar(50)
INSERT INTO Name values
('Branch1', 'Name1', '[email protected]'),
('Branch2', 'Name2', '[email protected]'),
('Branch3','Name3', '[email protected]');
IF we chose Windows File Share delivery extension, we can define path in the query.
7. Specify delivery extension options like below:
8. Specify report parameters to BranchName.
9. Specify when the subscription is processed, then click Finish to save the configuration.
For more information about Data-driven Subscription, please refer to the following documents:
http://msbimentalist.wordpress.com/2013/08/26/how-to-create-data-driven-subscription-in-ssrs/
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

How to create reports with the prompts like the pre-defined reports ?

We are analyzing pre-defined report: Historical Pipeline Analysis. When executed we can see the prompts for Pipeline Fiscal Quarter and Pipeline Fiscal Year.
If we open this analysis I cannot see how this prompt have been built.
If I save this pre-defined report (without any change) to My Folders and execute it from here, the prompts are gone.
I´d appreciate any help.
Antonio

I have the same issue. The prebuilt reports are actually dashboards, which is why the dashboard prompt filters show up.
I'm not sure how they get it to be a link like that on the reports tab (since the link doesn't point to a dashboard URL ).
Any idea how to get this same effect assuming I built the dashboard/prompt around updated report?

Are there pre-defined photo layouts in Aperture as there are in iphoto

I have looked at Aperture Boo layouts but pre-defined page layouts as per iphoto seem to be missing do I have to start
from scratch and design my own?
Am thinking I should stick with iphoto.....

Different programs different layouts.
I know that the slideshow themes from iPhoto 11 are useable in Aperture, not sure about the book themes.
As for sticking with iPhoto or moving to Aperture, if your major use of iPhoto is making books, calendars or the other consumer type projects that iPhoto does well, then you might be better off sticking with iPhoto. Aperture is definitely lacking when it comes to these.
However from both an image management perspective and image adjustment perspective Aperture wins hands down. One way around this you might want to consider is to use Aperture as your main photo program and only use iPhoto for these tasks. In iPhoto under File is the ability to access the Aperture library. ranted you only have access to the Aperture previews this way but you can set the preview quality in Aperture to what ever level you need to get he print quality you want.
regards

Which book categories have pre-defined thumbnails in iTunes (eg. Science Fiction, Art, Science, etc)?

Similar Messages

Maybe you are looking for