Which browser support for Oracle 10g forms (using window7 ultimate 32bit)

sir my 10g forms show pluginn error using any BROWSER .. also netscape navigator 9.0 for window 7 ultimate 32bit
PLZ solve my problem anyone..
i shall b very thankfullllll

plz solve my problem any one an which browser i will use for for window 7 32bit ????>
Please take a look at the Client Certification. It lists all of the browsers that are certified for the Java version you are using. Also, you will need to modify your configuration to correctly list the Java Plug-in version you have installed. For information on how to configure the JPI, take a look at Oracle 10gR2 Forms Services – Using Sun's Java Plug-in.
Craig...

Similar Messages

What is the best browser to run oracle 10g forms

SALAM TO ALL MUSLIM BRITHERS
what is the best browser to run oracle 10g forms_

Hello Ady,
Hey not all of us have a religionok, I extend my statement to those with a different religion, atheists, agnostics and anybody who does not beliefe in a divine being of any kind ;-)
some of us are bright enough to be atheistsThe implicit statement of this is not better than greeting only users of a certain religion.
To the OP: I respect your belief, but we had the discussion about greetings in this forum before. To most users any relation to a religion is inapropriate and considered a violation of the Terms of Use, e.g. {message:id=9677530}.
Edited by: Marwim on 16.04.2012 07:56

Enable Tracing for Oracle 10g Forms

Hi All,
When I try to launch Oracle 10g Forms from web, it comes up, displays blank screen and goes away. Same happens for test.fmb.
How can I start tracing on Form Services or Oracle 10g Forms?
Any help would be appreciated.
Thanks in advance.

You possibly have a popup or ad blocker active. Forms will most likely not work with a blocker.

Using scatter graph type in oracle 10g forms using bi beans

hi.. how i can use scatter graph type in oracle 10g using bi beans..
it seems scatter graph is supported in 10g but it doesnt work at all..
i used to use oracle graphics builder in oracle 6i forms,now i need to convert all my old graphs to 10g forms..the line,bar and pie it work very well but the scatter didnt work..
so please if anyone know how to use it please tell me.. and what versions of bi beans support the scatter graph type
thanks.
u can email me in
[email protected]

Hi,
What version of Oracle Forms are you using? If it is 10.1.2.0.2 (10g R2 Phase 2) then the BI Beans version should be 10.1.2.1 (3.2.2.0.24.2).
When you run a Graph, do you see any version numbers?
Regardless of the version, scatter graph should work. What kind of errors are you getting?
When you install BI Beans in JDeveloper, you get access to BI Beans Help. Go to the following topic for setting up data for a scatter graph:
Help -> Building Applications with BI Beans -> Presenting Data in Graphs -> Specifying Data for Graphs
Did you try posting your question on the Oracle Forms forum?
BI Beans PM

Support for Oracle 10g RAC?

Will Oracle 10g RAC be supported in 8.1SP4? If so, when is it scheduled for release?
In the mean time, has anyone used 10g RAC and can share their experience?
Thanks,
Guy

First, tell us your current skill set - especially as it relates to Oracle database. Then we can give you the right advice.

Suggestions for Oracle 10g Installation using VMware in Windows XP.

Hi All,
I am using Intel(R) Core (TM) 2 Duo CPU P8600 @2.4 Ghz with 1.98 GB RAM with Windows XP with 70 GB disk space. I would like to install a 2 node RAC with ASM and if possible also configure a DG for learning and testing purpose.Please advice if this will work using a VMware . Is RAC VM possible only Linux or with Windows as well ?
I think 11g is out of scope since i don't have sufficient memory.
I am new to VMware and have not done any installations or used it till now.
It would be appreciated if you could help with these doubts.
1. How much memory can be allocated to each instances?If i am installing Linux how much memory is required ?
2. what will be the load on the CPU and will i be able to use it without any resource crunch ?
3.Once memory is allocated to VM, can it be claimed back , is it like if i am not starting the VMware services.. i have the full 2 GB in discretion?
4. Can 10g Standard editions be used for learning purposes?
If the above hardware is not sufficient, please suggest a suitable configuration
Hari
Edited by: Hari2012 on May 27, 2012 12:24 AM

You do not have sufficient hardware - you will likely need 6GB of RAM or more, plus 100G of disk or more and a multiprocessor machine. Each VM will need at least 2GB of RAM, and once all of the VMs/RAC are installed, the system will be pretty busy running 3 OS's (host and two guests) and two databases. If you do not start up the VMs, all of the memory is available for the host to use. 10g is no longer available for download, you will have to use 11g - yes SE edition is sufficient for learning purposes.
Re: Oracle RAC Desktop Setup
HTH
Srini

Not able to merge files in oracle 10g forms using webutil

Hi,
i ahve developed an application in oracle forms 10g in which i am generating xls file by report and saving on server. now i want to merge header file to file generated by reports and save on server and then trasfer it to client using webutil. but i am not able to do so. please help
---sachin

do you have a solution for merging the headers ?
for example a batch file, which does the work?
then run this batch from forms with webutil on your client.

Error with internet browser while running oracle 10g forms

Dears,
Please do help if someone can.
I m using Forms [32 Bit] Version 10.1.2.0.2 (Production) for some project development. I have a form "customers". Last night as i was shutting down my system, everything was OK. Next day as i started oc4j and compiled forms and tried to run it. The forms invokes a new browser and after a while it sends error stating that Internet exploerer has encountered an error and we are sorry for inconvenience. As i press OK, explorer quit. I upgraded my browser and then tried but the same error encountered.
What should i do? please guide me.
Thanks in advance.

Hi,
When Explorer quits, does any file gets generated automatically on your desktop?
Regards,
Soumyajit

Whats the exam code for Oracle 10g Forms

Hai All
Could Any Tell Me The oracle forms 10g exam code Pls
Thanks & Regards
Srikkanth.M

Srikkanth.M wrote:
Hai All
Could Any Tell Me The oracle forms 10g exam code Pls
Thanks & Regards
Srikkanth.MIt seems you're asking the same question over the forum :)
Oracle forms 10g certification

Kindly suggest oracle automation testing tools supporting oracle 10g forms

Hi,
We would like to automate oracle 10g forms in our company. kindly suggest oracle automation tools supporting oracle 10g forms other than OATS.
If only OATS tool is available in Oracle, please suggest user guide for OATS.
Regards,
Sairam

Hi Sairam,
You can find OATS docs in OATS installation package itself. You can find separate pdf files for each OATS product(OpenScript Programmer Preference, OFT, OLT, OTM, Administrator etc).
Regards,
Deepu M

Oracle forms & reports support on oracle 10g lite

Currently our oracle forms & reports 6i application works on oracle 8i database with oracle 9i lite.
We upgraded our database to oracle 9i r2 and lite to 10gr2.
After publishing the application when i try to open the application the forms screen disappears for ever.
I wanted to know whether oracle forms and reports 6i is supported on
oracle 10g lite r2?
Thanks,
Ashok Kumar.G

No. Not only it isn't certified, but it is also impossible to run forms compiled with the 11g compiler with the 10g runtime. For 11g there is a install bundle for the developer suite / application server.
cheers

Un-embed applet on oracle 10g forms from web browser

Hi all,
I want to ask how can i seperately open my applet from web browser in oracle 10g forms. To be more precise to my question, i dont want to use my applet in web browser. It should be opened in new window i.e. applet window.
Regards,
Qasim Javaid Malik

If you want to run forms without the IE browser (hidden)
Try this
To open web forms just like client server with a hidden IE window, I have invented two methods.
****** make seperateFrame = True on formsweb.cfg ******
Method 1
<job id="SYMA">
<script language="VBScript">
Const SW_HIDE = 0
Const High = 128
strComputer = "."
strCommand = "C:\Program Files\Internet Explorer\IEXPLORE.EXE http://symphony-devl.atradiusnet.com/forms/frmservlet?config=syma"
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" _
& strComputer & "\root\cimv2")
' Configure the Notepad process to show a window
Set objStartup = objWMIService.Get("Win32_ProcessStartup")
Set objConfig = objStartup.SpawnInstance_
' Create Notepad process
Set objProcess = objWMIService.Get("Win32_Process")
intReturn = objProcess.Create _
(strCommand,Symphony, objConfig, intProcessID)
If intReturn <> 0 Then
Wscript.Echo "Process could not be created." & _
vbNewLine & "Command line: " & strCommand & _
vbNewLine & "Return value: " & intReturn
Else
Wscript.Echo "Process created." & _
vbNewLine & "Command line: " & strCommand & _
vbNewLine & "Process ID: " & intProcessID
End If
</script>
</job>
Method 2
<job id="SYMA">
<script language="VBScript">
dim objShell
set objShell = CreateObject("InternetExplorer.Application")
objShell.ShellExecute "C:\Program Files\Internet Explorer\IEXPLORE.EXE", "http://ws-79767.atradiusnet.com:8890/forms/frmservlet?config=localJpi", "", "open",0
</script>
</job>
Change the URL as appropriate, it's fantasitic .... !!!!!!
Any questions let me know ...... !

Errors using DBMS_SQLTUNE Advisors for Oracle 10g

I get errors trying to tune the below query for Oracle 10g using the DBMS_SQLTUNE advisors.
It happens when I wrap either a large block of PL/SQL code that uses bind variables or multiple nested subqueries with multiple JOIN conditions in a SELECT query statement that I wish to tune using the 10g SQLTUNE advisors.
Message was edited by:
benprusinski

Hi, I was trying to use the DBMS_SQLTUNE package to tune my sql statements used in the huge procedure. I can successfully create a task and execute it. But when I run report tuning task, I'm always getting error like the one in below example. Two questions I have now.
1) Is this becuase I'm using bind, but not passing any values?
2) Can I able to use to this package to tune a procedures instead of sql statement?
Example output...
SQL> SELECT DBMS_SQLTUNE.REPORT_TUNING_TASK( 'my_sql_tuning_task3')
2 FROM DUAL;
DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK3')
GENERAL INFORMATION SECTION
Tuning Task Name : my_sql_tuning_task3
Tuning Task Owner : SCOTT
Scope : COMPREHENSIVE
Time Limit(seconds) : 3000
Completion Status : COMPLETED
Started at : 02/26/2009 21:44:41
Completed at : 02/26/2009 21:44:41
Number of Errors : 1
DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK3')
Schema Name: KPRAVEEN
SQL ID : 479831s42xj1n
SQL Text : SELECT a.pdrorn, a.pdrcto, a.pdrlln FROM f4311 a
WHERE a.pddoco = receiptsrcrec.prdoco AND a.pddcto = :2 AND
a.pdkcoo = :3 AND a.pdsfxo = :4 AND a.pdlnid = :5
ERRORS SECTION
SQL>

Configure Oracle 10g Forms 9i for XML

How do I configure Oracle 10g Forms 9i to compile XML code? Is there a particular configuration file I need to update with .jar files that references XML processing or parsing?
Thanks!

There is a java utility that can take an XML file that you have generated from an fmb file previously and compile it back to an fmb file.
Its called frmxml2f.bat. You'll find it in $Oracle_home/bin

Iconic file in oracle 10g forms

hii,,
i am a new user in oracle 10g form,,,here i am running a form & placing all the icons in a folder,after that i changed the iconic file path in the default.env file,the path is same where the icons are kept,,but still i am unable to see the icons at the run time,,,,,
do i need to modify some other file or the icons will be kept at some particaular place????
plzzzz help.....

hi
1 How to Display Iconic Images Using Forms 9.0.x/ 10.x?
When running an Oracle Forms 9i/10g application the icon files used must be in a web enabled
format such as JPG or GIF (GIF is the default format) (This is unlike older versions of forms running in client-server mode when the file format is .ico.)
Icon image files can either be retrieved by Forms as individual files on the filesystem or from a Java Archive (JAR file).
If an application uses lots of icon images it is recommended that they are stored in a JAR file to reduce the number of HTTP round trips.
Reference:Note 232413.1 How to Deploy Iconic Images via a JAR File in Forms 9i/10g?
The example below details steps to configure iconic images as individual gif or jpeg files.
It is a first approach recommended for initial testing and understanding.
Example:
========
This document has been written for use with both Windows and UNIX operating systems: Windows will use the "\" character to delimit directories and UNIX uses the "/" character. Any other differences are noted in the document.
1) Determine the physical location of the icons on your web server. For this example, assume that the icons are stored in D:\Myfiles\icons.
2) Create the virtual directory in the forms90.conf file that point to the location of your Forms 9i/10g icons. This file is located in:
$ORACLE_HOME\forms90\server\forms90.conf
To define a virtual directory forms90/icons, use the following syntax:
# Virtual path for ICONS (used to show icons in a form ) AliasMatch ^/forms90/icons/(..*) "D:\Myfiles/icons/$1"
Below is an example of the forms90.conf after it has been modified to include the /forms90/icons virtual directory.
# Virtual path mapping for Forms Java jar and class files (codebase) AliasMatch ^/forms90/java/(..*) "E:\IASR2\APP/forms90/java/$1" # Virtual path for JInitiator downloadable executable and download page AliasMatch ^/forms90/jinitiator/(..*) "E:\IASR2\APP/jinit/$1" # Virtual path for runform.htm (used to run a form for testing purposes) AliasMatch ^/forms90/html/(..*) "E:\IASR2\APP/tools/web90/html/$1"
# Virtual path for ICONS (used to show icons in a form ) AliasMatch ^/forms90/icons/(..*) "D:\Myfiles/icons/$1"
( For 10g use instead of "forms90" -> "forms")
3) Direct forms to use the /forms90/icons or /forms/icons virtual directory when running on the web by modifying the Registry.dat file in the $ORACLE_HOME\forms90\java\oracle\forms\registry or $ORACLE_HOME\forms\java\oracle\forms\registry
directory. Note that for UNIX, both the path name and file name are case sensitive. You must specify "Registry.dat".
Modify the default.icons.iconpath entry as follows: default.icons.iconpath=http:///forms90/icons/ or default.icons.iconpath=http:///forms/icons/
If the URL used to bring up forms on the web is: http://abc.oracle.com:7778/forms90/f90servlet or http://abc.oracle.com:7778/forms/frmservlet
Then the entry required for the Registry.dat will be: default.icons.iconpath=http://abc.oracle.com:7778/forms90/icons or default.icons.iconpath=http://abc.oracle.com:7778/forms/icons default.icons.iconextension=gif
4) Now use EM Website to: a) Restart the OC4J-BI-Forms Instance b) Restart the BI-FORMS HTTP Server Instance.
5) Verify that the virtual directory has been defined properly and that the icons can be viewed in a browser.
Assuming that exeqry.gif exists in the D:\Myfiles\icons directory, the following URL should show the icon:
http://abc.oracle.com:7778/forms90/icons/exeqry.gif or http://abc.oracle.com:7778/forms/icons/exeqry.gif
6) Check the form : http://abc.oracle.com:7778/forms90/f90servlet?form=D:\Testcases\F90\ICON_CHECK_IASR2.fmx or http://abc.oracle.com:7778/forms/frmservlet?form=D:\Testcases\F10g\ICON_CHECK_IASR2.fmx
CHECKLISTS
=============
Icons do not appear in the browser using the URL:
o Verify that you are using the correct machine name and port for the OC4J_BI_Forms object.
o Check the virtual directory name to make sure that there are no typographical errors. o Check for typographical errors in the forms90.conf or forms.
conf for the virtual directory. o Check the name of the icon on the file system. If the file is saved as Exeqry.gif, then it will not be found using the URL http://abc.oracle.com:7778/forms90/ Close all your browser sessions and open a new browser window.
Execute the URL to bring up from the Form Builder runtime or from the browser.
( For 10G use "forms" instead of "forms90")USEFUL REFERENCES:==================
[PDF] Oracle9iAS Forms Services Deployment Guide (P/N B10170-01)Configuring Oracle9iAS Forms Services ->
Deploying Icons and Images Used by Oracle9iAS Forms Services http://otn.oracle.com/products/forms/pdf/B10170_01.pdf
[PDF] Oracle9iForms Services - How to Deploy Iconshttp://otn.oracle.com/products/forms/pdf/webicons.pdf
sarah

Which browser support for Oracle 10g forms (using window7 ultimate 32bit)

Similar Messages

Maybe you are looking for