Which capture devices work?

Hi everyone,
I've never seen such an important detail to be so difficult to find
I know they say he device must have directshow etc etc but i can't just find a list.
Can anyone let me know what capture device you use that you know works? Thanks!!
We are using FMLE for streaming our church services live and I have a deal on a Videonics MX-1 which I am thinking of getting if I can quickly find a device I can go through from the MX-1 to the PC that will work. I have a cheap Video to USB "Easy cap" which I am trying with FMLE but it does not work very well, at least not with the VCR signal I am sending it...
thanks for your help everyone...

Pondini,
Wow, I thought this would be fairly simple! Turning out to be quite a complicated thing.
I really need to figure this out...
Would you say this is a good solution:
1. Use a Time Capsule as my media storage drive
2. Attach an external hard drive to the Time Capsule
3. Use Time Machine to backup my main computer and my Time Capsule to the external hard drive
If that doesn't work, I'm kind of stumped as to how I would back up my media from a networked drive.
I like the stability of Apple's Airport Extremes/Time Capsules. But perhaps I should be looking at another wireless router?
Thanks again,
Matthew

Similar Messages

HT4972 hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it for example i have a ipad 1st and i dont know whats is the latest version of ios for this device thanks

hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it. for example i have a ipad 1st and i dont know whats is the latest version of ios for this device

Google "iOS versions" and read the first match (Wikipedia)........

Unable to Initialize Capture Device - Works fine in iMovie

Am using a Sony HDV HDR HC1E Pal Handycam
Final Cut Pro 5.1
QT Pro 7.1.3
Works fine with cassettes in HDV - imports into FCP fine
Am trying to import a cassette recorded on that camera in DV LP
Works fine in iMovie
Have deleted the QT packages and reinstalled QT
Still am getting the 'Unable to Initialize Capture Device' message when using log and capture.
Settings on camera
VCR Auto (have also tried HDV or DV)
iLink conversion off (i.e.don't convert hdv-dv)
TV type 16:9 (have also tried 4:3)
Component 1080i/576i also tried 576i
Annoying thing is that works fine in iMovie but not FCP?!!
Any help GREATLY appreciated!
Thanks!
Hannah
iMac 20 Flat Screen G5 1.8Ghz 1.5GB SDRAM Mac OS X (10.4.8) 200 GB and 120GB External Hard drives

I would like to add the following in hopes that someone will come up with a solution. The problem lies somewhere in Quicktime and the FireWire capture. I have the exact same camera and problem, and can assure you it has nothing to do with cam settings or DV LP. Once your system is stuck in this HDV mode, it would seem that regular DV can not be used again. I also have 2 other DV cams that are not HD. One is PAL, one is NTSC. I would further add that my external FireWire iSight no longer works in any application. I do not receive error messages, I simply get the spinning beach-ball of death.
I have a Dual G5 2.7 with 4 gigs RAM running FCP 5.0.4 on OS 10.4.8
I have run Cocktail, rebuilt permissions and re-installed Quicktime 7.1.3 four times as per Apples tech article 301852
I have used FCP Rescue 5 to clear preferences
I have captured footage from both regular DV cams to iMovie and then added the footage to FCP. The footage plays on the screen of both DV cams flawlessly via FCP. (I can also capture HDV in iMovie as well)
I have tried logging footage directly through the QuickTime application with both DV cams and my iSight and get the same beach-ball of death as FCP.
Why can iMovie work with these devices flawlessly yet QuickTime can not.
Why does it seem like the system is stuck in some kind of HD mode.
Just to point out the obvious:
I have no other FireWire devices other than the cameras and I only connect one at a time.
I have shut down, disconnected and re-connected before attempting to use the devices.
I have booted my G5 from a second system disk and everything (HDV cam PAL DV cam NTSC cam and iSight) function flawlessly on all the FireWire ports of my machine.
I have worked with FCP for about 6 years and Macs for 20. I understand the easy set ups etc.
Spent way too much time customizing my system to think about the clean install route, so I hope someone can shed some light on this.
Thanks
Lorne
PowerMac Dual 2.7 GHz PowerPC G5 4 GB DDR SDRAM 400 GB and 250 GB Internal Drives Mac OS X (10.4.8)

Supported Video Capture Devices?????

I recently purchased the Adobe Photoshop Elements Premium 8.0. I am now looking for a VIDEO CAPTURE DEVICE that is supported for use with this software. Adobe offically only says Matrox brand devices are acceptable but these devices are expensive.
I've also heard about the Canopus 110 for about $200.
If anyone can make a suggestion on which Capture Device to use, which ones are recommended or the one that just seems to work best, I would appreciate it.
Thanks,
Robert

You would get a better answer @ http://forums.adobe.com/community/premiere/premiere_elements

I need help with a Capture device. Please Help me

hello.
I need a suggestion about which capture device (FrameGrabber), it is compatible with JMF 2.1.1, at 640x480 with 24 fps or better.
PS: for win Xp, Intel P.III 500Mhz, 256Mb RAM, and j2se 1.4.2.
Greetings.

Surely all there are in market now. My two webcams support that format. Although your machine could be a little poor..... could be or could be not. You must probe it

Can't get driver to work with ezcap usb 2.0 video capture device on windows 8.1

I have an ezcap video capture device that works fine on my windows 7 machine but will not work in windows 8.1. The software (arcsoft 3.5) functions properly but will not let me select the video grabber as a source. The driver itself indicates not compatible with 8.1 and the there are no drivers out there that I can find to address this issue? Any known solution would be helpful.

Hi,
It is not from HP. Please try driver from the following link:
http://www.ezcap.tv/ezcap116-drivers?zenid=r53fvgj1n510tdme9itqc9ql52
(After the first screen shot).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Have a canon dc310 camcorder that uses mini dvd's. How can I get my new Imac to read these dvd's?Camcorder unable to connect to computer. Will a mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with a mac?

I have a Canon DC310 camcorder that uses mini dvd's and doesn't have the ability to connect to a computer. How can I get my new Imac to read these dvd's? Will the mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with the Mac? Do I need anything else to get the dvd material onto my mac? Thanks!!

No DV port in camcorder. Just a yellow AV port/hole. I did find a Canopus ADVC110 device in a box that was bought several years ago to convert VHS tapes onto DVD's. Can I use this with a Mac? Could I connect a dvd player to the Canopus and transfer the disks onto my Mac? Or, connect the camcorder via AV port to the Canopus and that to the Mac and transfer that way? Thanks again!

I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. Where can I download ios 4.3.5 from?

I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. My pc didn't create a backup before updating software so I can't revert back to ios 4.3.5 from there, where can I download ios 4.3.5 from?

I tried just about everything and finally brought my Ipod touch to the apple store. The tech installed ios 4.3.5 but still no WIFI. He recommended a $149 exchange - not really a bad deal with a new battery and 90 day warranty, but I thought I'd try again.
The "solution" was bizarre. On YouTube was a fix involving taking the motherboard out and heating the wifi components with a heat gun.
I did not like that idea, but another involved turning it off, putting it in the freezer for five minutes and restarting. It worked! I must admit the fix does not work reliably, so I may still go for the exchange. Still, I am now convinced that it is a hardware problem. i remember back in the old days, TV repairmen sprayed a suspected bad resistor with Freon. The chilled component would work long enough to identify what needed replacement. Perhaps something similar is happening here.
For anyone wanting to try this, I found it more convenient to place the back of my ipod on a frozen cold pack until the wifi is restored. It seems to happen when condensation forms on the face. I used a towel to wipe off the moisture so as not to add to the problem.

Capture devices that work with Final Cut Express

Would any one out there be able to recomend a reasonably priced video capture device that works with FCE other than a video camera? I want to input video and audio from VHS and DVD. I also want to input Audio from cassette and CD.
imac G5 Mac OS X (10.4.4)

I am in a similar situation. All I can say is that the ADS Pyro AV Link works well with iMovie but not with Final Cut Express or Pro so I returned it.
I am waiting for a DataVideo DAC 100, Their web site gives specific instructions as how to use the DAC with FCP so I am hopefull that it will work with FCE.
http://www.datavideo.us/products/dac100_mainpage.htm
The Canopus ADVC 110 has also been recommended on this forum.
http://www.canopus.com/products/ADVC110/index.php

Camera not working (No video capture devices were found)

Hi,
Macbook air late 2010 upgraded to 10.9.2 camera not detected, it was working 2 minutes before upgrade.
system info states - No video capture devices were found.
I have re-installed 10.9.2 clean using cmd-r on startup,
repaired permissions,
reset SMC
still getting - No video capture devices were found.
anyone got any advice,
Thanks,
Charles

Hi,
Ok switched my Macair on to re-install 10.9.1, thought I'd give facetime one last try and its working
So the way I fixed it was to uninstall all 3rd party video driver (like airparrot).
This did not fix problem, booted up holding the Command-R keys.
Re-installed Maverick
Restarted
Camera was still not working
Downloaded latest Skype
Ran Skype - no camera detected in preferences
Repaired permissions using Disk Utility
Left it on for few hours
Restarted next morning, opened Facetime, now everything is working
Charles

XML Document Not working / Capture device problems HELP!

Whenever i open the xml file from justin.tv it always says "Log File Cannot Be Created," then ist says "Profile Vlidation"
And whenever i select my captutre card it always says " Problem With Video Capture Device"
Somone please help me!
(i have attached the xml file that keeps on crashing for me)

You are getting "Log File Cannot Be Created" error because when you download XML file from someone else computer then FMLE by default folder takes path for Log file as his "My Videos" folder. So while checking the profil, FMLE gets to know that this profile is not perfect and hence gives "Profile Validation Error" and then silently corercts those errors. After clicking OK on "Profile Validation error" window, you can go to Encoding log tab and check the changes that were made in FMLE on above the settings of your XML profile file.
You are getting "Problem With Video Capture Device" because either the drivers of your device are not corerctly isntalled on your machine or your device is busy with some other application or your device is not connected properly. Please check the drivers and connectivity of your device and make sure that your device gives RAW/Uncompressed Video format only

5.1.4 update breaks HDV capture? Unable to Initialize Capture Device

Problem:
Final Cut Pro cannot capture standard 1080i60 HDV footage from Sony FX1 camcorder. FCP reports "Unable to Initialize Capture Device" when the log and capture window is opened. However, the footage CAN be captured in iMovie (which is interesting, and unacceptable). When HDV>DV downconvert option on camcorder is activated, footage CAN be captured as anamorphic SD, so the camcorder and FW do work.
The problem is occuring on a rock-solid FCP system that I use on a regular basis (mainly for SD editing). It has been approx 2 weeks since I last attempted a HDV capture, the system has been working great with SD footage (still does).
Factors that have changed to my knowledge since HDV capture was last functioning properly:
*Added a new external FW drive into regular usage (a different brand than normally used, no issues with it so far).
*Updated FCP to 5.1.3, and then 5.1.4 when that fix came out. All SD captures and work have been fine so far.
Here's what's interesting...I had a copy of the FCP v5.0.4 .app that I had saved an archive of prior to the crossgrade update. Guess what? I can load it up, and it captures HDV without any problems! With that in mind, this looks like an FCP 5.1.4 issue. But I am at a loss on how to proceed further in troubleshooting. Many thanks in advance for any assistance.
Matt Jeppsen
FresHDV.com
---NOTES---
What I have tried:
*Attempted capture with a different Sony FX1 camcorder.
*Swapped firewire cables and system firewire ports.
*Attempted capture with camera FW chained to an external HDD.
*Unplugged all other external firewire devices from the system.
*Trashed FCP prefs using FCP Rescue 5, created new project using Easy Setup (for HDV).
*Tried different variations of FCP A/V settings, tried all the HDV FW device control presets and the HDV AIC capture preset.
*Per instructions at http://docs.info.apple.com/article.html?artnum=301852 I removed the numbered Quicktime pckg Receipts and re-installed the latest version (7.13). Post-install/reboot, I repaired Disk Prefs and Verified the disk using Disk Util.
*Have also attempted installing QT 7.13 2 and 3 times in a row, also trying disk prefs repair BEFORE the post-install reboot.
Final Cut Pro Audio/Video Settings:
Sequence Preset: HDV-1080i60
Capture Preset: HDV
Device Control Preset: Sony HDV Firewire
Sony HDR-FX1 IN/OUT REC settings:
*VCR HDV/DV: HDV
*COMPONENT: 1080i/480i
*i.LINK CONV: OFF
*TV TYPE: 16:9
*A/V->DV OUT: OFF
System/Software Facts:
*Final Cut Pro 5.1.4
*Quicktime 7.13
*PPC Mac G5 2.7 Dual (2.5GB RAM)
*35GB free on System, 45GB free on internal FCP Scratch disk
Final Cut Pro 5.1.4, G5 DP 2.7 (PPC) Mac OS X (10.4.8)

I think I figured out this vexing problem. I too was having the same issue. Check to see that your Quicktime is newer than 7.1.2. If it isn't you'll have to upgrade it. I only upgraded to 7.1.6 here because I was afraid of going to a really new version. http://www.apple.com/support/downloads/quicktime716formac.html. After I upgraded my quicktime, I ran software update and the Final Cut Pro 5.1.4 update appeared. I hoipe this helps.

Video capture device bad image/no sound

Hi !!
I bought this "grabby" usb dongle from terratec to record old vhs cassete on my computer, but is doesn't work on linux. (It works ok on win7, so cable-connections problems are excluded)
On vlc I did 'open capture device', choose /dev/video0 for vid, hw:2,0 for sound(tried them all anyway), and PAL/SECAM video standard.
Problem is I have a super crappy video image (on mplayer also), and no sound. The video is colored, I recogize it, but the pixels are huge, it's awfull.
After some research I found that a module named em28xx is supposed to handle this device. I found some forum post here and there about the sound problem, it is addressed with a 3years old patch on em28xx-cards.c (which doesn't exist on my machine, so I couldn't apply it).
Here is dmesg :
[ 8371.430051] em28xx audio device (0ccd:0096): interface 2, class 1
[ 8371.430074] em28xx audio device (0ccd:0096): interface 1, class 1
[ 8371.438360] em28xx: New device TerraTec Electronic GmbH TerraTec Grabby @ 480 Mbps (0ccd:0096, interface 0, class 0)
[ 8371.438363] em28xx: Video interface 0 found
[ 8371.438365] em28xx: DVB interface 0 found
[ 8371.438511] em28xx #0: chip ID is em2860
[ 8371.554008] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 96 00 50 00 11 03 9c 20 6a 32
[ 8371.554020] em28xx #0: i2c eeprom 10: 00 00 06 57 0e 02 00 00 00 00 00 00 00 00 00 00
[ 8371.554029] em28xx #0: i2c eeprom 20: 02 00 01 00 f0 10 01 00 00 00 00 00 5b 00 00 00
[ 8371.554039] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 8371.554048] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8371.554057] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8371.554067] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 54 00 65 00
[ 8371.554076] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
[ 8371.554086] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
[ 8371.554095] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 20 03 54 00
[ 8371.554104] em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
[ 8371.554114] em28xx #0: i2c eeprom b0: 47 00 72 00 61 00 62 00 62 00 79 00 48 00 00 00
[ 8371.554123] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8371.554133] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8371.554142] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8371.554151] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8371.554163] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xd3498090
[ 8371.554165] em28xx #0: EEPROM info:
[ 8371.554166] em28xx #0: AC97 audio (5 sample rates)
[ 8371.554167] em28xx #0: 500mA max power
[ 8371.554170] em28xx #0: Table at 0x06, strings=0x209c, 0x326a, 0x0000
[ 8371.554172] em28xx #0: Identified as Terratec Grabby (card=67)
[ 8371.856372] saa7115 4-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
[ 8372.495384] em28xx #0: Config register raw data: 0x50
[ 8372.515361] em28xx #0: AC97 vendor ID = 0x83847650
[ 8372.525227] em28xx #0: AC97 features = 0x6a90
[ 8372.525231] em28xx #0: Empia 202 AC97 audio processor detected
[ 8372.908213] em28xx #0: v4l2 driver version 0.1.3
[ 8373.760714] em28xx #0: V4L2 video device registered as video0
[ 8373.760718] em28xx #0: V4L2 VBI device registered as vbi0
And lsmod :
[user@OGwncMO ~]$ lsmod | grep em28xx
em28xx 88986 0
tveeprom 13809 1 em28xx
videobuf_vmalloc 4351 1 em28xx
videobuf_core 16231 2 videobuf_vmalloc,em28xx
v4l2_common 5370 2 saa7115,em28xx
videodev 100564 3 saa7115,em28xx,v4l2_common
i2c_core 20508 7 i2c_i801,saa7115,em28xx,nvidia,v4l2_common,tveeprom,videodev
usbcore 147434 10 uas,ath3k,btusb,snd_usb_audio,usb_storage,em28xx,snd_usbmidi_lib,ehci_hcd,usbhid,xhci_hcd
From what I see my guess is that the module supposed to handle this hardware is present but doesn't do its job properly...any help?

Hi again !
Thanks for you tip nomorewindows. The programs tvtime and xawtv worked out of the box concerning video !! xawtv, however, crashes everytime I try to resize the (very) small window. As for tvtime, there is no sound (output is it can't open /dev/mixer so I guess it's fixable, I'll look into it).
I started reading the doc but I didn't found yet if it was possible to record the output with these program...
Concerning the cables, you are right they are not special at all it is standard : there is the triple (yellow=composite video, red/white for audio) cable and a fourth one for video but with inferior quality, I didn't connect it (it's either the yellow or this one for video)

Use a capture device twice at the same time?

I have write a application using JMF. But I have a big question that how can I use a capture device several times at the same time????
For example:
I create a player to play video from my webcam on my PC ,and then I want to send the video stream from my webcam to another PC at the same time. But I failed--only one task can work.
For example:
1, I write a class Player and another class RTPTransmit. Then I send the same medialocator to two of them. Then there will be a exception said that capture device is in use. And only one task can work.
2, I write a class Player and another class RTPTransmit. Then I use :
dataSource1 = Manager.createDataSource( locator );
dataSource2 = Manager.createCloneableDataSource( dataSource1 );
then I send dataSource1 to Player object to play video on local PC and send dataSource2 to RTPTransmit to send video to another PC. But only one task will work too.
My question is that how can I use a capture device several times at the same time???
I have tried several ways and sill can not find a method. If anyone know how to do,could you tell me please? Thank you very much.

Yes ,I use Manager.createCloneableDataSource() method to create the clone of the datasource ,but it can not work too. The java doc illustration is :
Creates a cloneable DataSource. The returned DataSource implements the SourceCloneable interface and enables the creation of clones by the createClone method.
If the input DataSource implements SourceCloneable, it will be returned right away as the result. Otherwise, a "proxy" DataSource is created. It implements the SourceCloneable interface and can be used to generate other clones.
When createCloneableDataSource is called on a DataSource, the returned DataSource should be used in place of the original DataSource. Any attempt to use the original DataSource may generate unpredictable results.
It means that if I clone a datasoure from original datasource, then the createCloneableDataSource() method will return a datasuouce implements interface SourceCloneable, right ? I see that the intereface SourceCloneable has a abstract method createClone() , but when I use createCloneableDataSource() to get a source clone, I find that I can not use method createClone(), why??? For example: data1 is the
orginal datasource. Then:
DataSource data1 = Manager.createDateSource( locator );
DataSource data2 = Manager.createCloneableDataSource( data1 );
now data2 is the "proxy" datasource which implemnets the interface, right? But I can not use data2.cloneClone() ,why? Then I write the fllowing code:
DataSource data3 = Mangaer.createCloneableDataSource( data2 );
DataSource data4 = Manager.createCloneableDataSource( data2 );
playOnLocalPc = new PlayOnLocalPc( data3 );
playOnLocalPc.start();
rtpTransmit = new RTPTransmit( data4 );
rtpTransmit.start();
PlayOnLocalPc and RTPTransmit is my own class to play or transmit video stream. But they can not work at the same time. If I play video from webcam on local PC and then start to transmit stream to other PC , the play window will become black. Why?????It is too strange. Dose anyone know the reason ,please tell me, thank you very much. Giving some example code will be better:) Thank you again!

Image Capture not working with 10.6.6

I use a Canon MP780 printer/scanner with my Macs. I have no printing problems. However, when I upgraded to Snow Leopard the Canon MP Navigator scanning software stopped working and Canon's downloaded driver update didn't resolve the problem. Despite conversations with a helpful Canon engineer they seemed unable to offer a solution. However, I started using Image Capture as a satisfactory solution and this has worked fine until I upgraded to 10.6.6. Now this has stopped working too - I just get the message 'No camera or scanner selected'. I tried installing the recent Apple Canon download (Dec 14th 2010) but it hasn't resolved the problem. I see that the MP780 scan function does not seem to be supported by Apple on a list they publish on the site, however.
I can still scan by using the printer dialogue box but it is very long-winded and not very satisfactory. Is there any hope of me being able to use Image Capture again with my scanner?

fordwich wrote:
I use a Canon MP780 printer/scanner with my Macs. I have no printing problems. However, when I upgraded to Snow Leopard the Canon MP Navigator scanning software stopped working and Canon's downloaded driver update didn't resolve the problem.
The MP Navigator application requires the [Canon MP780 scanner driver|http://support-au.canon.com.au/contents/AU/EN/0900205301.html] to be installed. The Canon driver update from Apple does not include this full scanner driver, only a mini driver that lets you use the scanner via Image Capture/Preview.
However, I started using Image Capture as a satisfactory solution and this has worked fine until I upgraded to 10.6.6. Now this has stopped working too - I just get the message 'No camera or scanner selected'. I tried installing the recent Apple Canon download (Dec 14th 2010) but it hasn't resolved the problem. I see that the MP780 scan function does not seem to be supported by Apple on a list they publish on the site, however.
The mini driver mentioned above is known as an ICA driver. Canon provides this package to Apple for software download and also has it for various models on their web site. Checking the Canon Australia web site, the MP780 does not list the ICA driver. And checking the Canon IJSCanner1 package located in Library > Image Capture > Devices, which is where this information gets copied to, the MP780 is not in the devices list. So this confirms what Apple has listed on the web but makes no sense how you were able to scan on 10.6.5 or how you are still scanning now via the Print & Fax section, which uses the ICA driver. I would not think that the .6 update would remove the MP780 from the device plist. I need to check a previous build when I get back to the office.
But in the meantime if you can still use the MP780 in Print & Fax then this is the same as what you get in Image Capture. If you click the Show Details tab in the scanner preview window then this may be what you were used to with Image Capture.
And I believe that if you install the full scanner driver then you will be able to use [MP Navigator v2.0.8|http://support-au.canon.com.au/contents/AU/EN/0900182001.html].

Which capture devices work?

Similar Messages

Maybe you are looking for