Which card can I use?

I am using PCI 6110, and I want to do some control work. I tried to call the driver in NI-DAQ, but it is still too slow. NI doesn't support register level programing for 6110.
Can anyone recommend one daq card (which I can write register level driver) for me? I need 1Mhz~2MHz sampling rate.
Thanks

StephenZhou wrote in news:506500000005000000FBB70000-
[email protected]:
> Hi, gbush
>
> Thanks for your reply. I am sorry that I didn't describe this problem
> clearly.
>
> I have a 500Hz signal, and I use 1MHz sampling rate. I will get 2000
> data points every 2 ms. I can achieve this using pci 6110.
>
> The question is that the time I transfer these 2000 data points using
> 6110 is too long. Perhaps I can increase this speed by writing
> register level driver. NI doesn't provide any manual for 6110. I
> wonder if there is another card which has such manual, and also can
> satisfy my requirement (1MHz sampling rate).
>
> Any suggestions?
> Many thanks
>
Does it do you any good to sample at a Meg if your signal
is 500 Hz. You
can very comfortably sample at 10KHz with no loss. You would then be
transfering 20 points, as opposed to 2000.
Although, its hard to believe that a simple memory transfer is what's
holding you up. 500Hz control problems are simply not Labview's forte.
LabviewRT could do this with no problem, but that would require hardware
changes. I think you'd be better off doing the register-level
programming. NI does provide a manual for the 6110, at
http://www.ni.com/pdf/manuals/321759d.pdf, but it doesn't have the
register info you need. Perhaps the tech support can get this info to
you.
Data Translation cards (at least as of about 10 years ago, when I stopped
using them) provide this information, and some very good examples.
Scott
Reverse first field of address to reply

Similar Messages

If iphone 5s unlock version which order from apple activated by T-mobile card can be used in China

I ordered one T-mobile contact free Iphone 5s in apple online store recently, but I activate the iphone by the T-mobile card which install the iphone auto., not by China's network carrier card, so I want to know if iphone 5s unlock version which actived by T-mobile card can be used in China ?

You have already activated the phone with the T-Mobile sim card in it, which is why the phone has become locked to T-Mobile and whilst the phone is locked to T-Mobile, there is no way to re-activate it with another sim card.
It is not silly at all and this is where you needed to have done your research in full and ask those questions about the differences between unlocked phones and sim free/contract free phones and then you would have found this out.
There is nothing else that you can do. What you need to do is contact T-Mobile in the US and tell them that you purchased the phone from the US Apple store and activated it with their sim card and the phone is now locked and request that they unlock it for you. They may do it, but mostly they may tell you that you need to wait 40 days before they will unlock the phone for you. Unfortunately, whilst you wait for the 40 days you won't be able to use the phone and there is absolutely nothing that you can do.
Also, if you are using this phone in Europe why on earth did you buy it in the US? If you knew that you wanted to use the phone in Europe, why did you not go and buy the phone in another European country? This would have made more sense, because countries like the UK sell unlocked phones in the Apple store and you will have EU warranty on the phone and you will most likely get 4G too, but with the phone you have now, you have found that you cannot use it and your warranty is only valid for the US and not the EU - iPhone warranty is not international.
There is nothing else that you can do now except contact T-Mobile in the US and request an unlock, but until they will unlock you will not be able to use the phone.

If you buy a itunes gift card, can you use it to make in game/app purchases?

if you buy a itunes gift card, can you use it to make in game/app purchases?

Thank you

In which trigger can i use go_item() in oracle forms 6i?

Hi,
I have a problem with go_item.
I tried executing go_item() in triggers like key_next_item, pre_text_item, post_text_item & when_validate_item.
But none of them seemed to be working.
I searched for other possibilities in the site, where i found a solution of using trigger ' when_timer_expired ' with ' when_validate_item ' ,
but when i tried to create trigger, i did not find that trigger (when_timer_expired) in the list at all.
I'm using oracle form builder 6i.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production.
A trigger with go_item() must be created when tab is pressed.
In which trigger can i use go_item() ??
Thank You.

from help:
Restricted Built-in Subprograms
Restricted Built-ins affect navigation in your form, either external screen navigation, or internal navigation. You can call these Built-ins only from triggers while no internal navigation is occurring.
Restricted Built-ins cannot be called from the Pre and Post triggers, which fire when Oracle Forms is navigating from object to another.
Restricted Built-ins can be called from the When triggers that are specific to interface items, such as When-Button-Pressed or When-Checkbox-Changed. Restricted Built-ins can also be called from any of the When-New-"object"-Instance triggers and from key triggers.
Unrestricted Built-ins do not affect logical or physical navigation and can be called from any trigger.
The Built-in descriptions include a heading, Built-In Type, that indicates if the Built-in is restricted or unrestricted.

Which cable can I use to connect my ipad to my iphone

Which cable can I use to connect my ipad to my iphone when I need to connect to the internet when not in a Wi-Fi hotspot.?

Your question has already been asked and answered in your duplicate post.

HT1918 Why my credit card can't use in iTunes store

Why my credit card can't use in iTunes store

What error message did you receive, we need more info.

I have a at&t cell phone with a 3g at&t sim card can I use it in my at&t 3g Iphone

I have a at&t cell phone with a 3g at&t sim card can I use it in my at&t 3g Iphone?????

i don't think att and verizon use the same technology in their phone
The answer is no

I have a 3.06 Ghz Intel cor 2 duo 4GB 1067 Mhz DDR3. Which update can i use.

I have a 3.06 Ghz Intel cor 2 duo 4GB 1067 Mhz DDR3. Which update can i use.

Yosemite. Back up your data, check your applications for compatibility, and download it from the Mac App Store.
If desired, you can instead buy a download code for Lion or Mountain Lion from the online Apple Store.
(123967)

IMAC 2010 which HDD can I use to replace the malfunctioned Seagate Barracuda 7200.12 1TB?

iMAC 2010 which HDD can I use to replace the malfunctioned Seagate Barracuda 7200.12 1TB?

After doing a bit more research, the 2010 iMacs do appear to have a third cable connecting to the hard drive, for the internal temp sensor. This would appear to be the block of 8 pins that are on almost all drives, but they are normally intended for jumpers. Unfortunately I was unable to find any documentation or specs that would indicate this pin block connects to the internal temp sensor on either standard (non-Apple) WD Black or Seagate 7200.12 drives.
I did find some info that may be of some use:
WD: Where to connect an external temperature sensor to a Serial ATA or EIDE hard drive.iFixit: Replace the hard drive, how do I connect the hard drive thermal sensor?
Apple Technician Guide: iMac 2010 27" (mid-2010)
Various discussion threads I found through google searching indicated some people succeeded with installing an external temp sensor on the body of the drive.
Sorry I couldn't help more.

I have ipad3 and have internet from sim card, can i use my ipad as a wirelss router and how if it possible, i have IOS 8.0.2

I Have ipad with IOS8.0.2 with internet from sim card, can i use it as a wireless router and how if it possible?

Hi Mostafa sanad,
Welcome to the Apple Support Communities!
It sounds like you may want to use your iPad as a personal hotspot. Please read over the attached article for information on the process.
iOS: Understanding Personal Hotspot
Have a great day,
Joe

If I need to burn multiple audio CDs which software can I use?

If I need to burn multiple audio CDs which software can I use?

Personally I use the freeware SimplyBurns or Burn for all burning
http://www.macupdate.com/find/mac/Burn

How many PCI-FBUS/2 cards can be used in a PC to connect to various Fielbus networks?

How many PCI-FBUS/2 cards can be used in a PC to connect to various Fielbus networks? Are there limitations with the Communications Manager and Configurator?
I currently have 1 PC with a PCI-FBUS/2 card interfaced to 2 Fieldbusses. Can I place any PCI-FBUS/2 card into the PC and run 2 additional Fieldbusses?

Hi hhsatBeck,
The limitations of CM and Configurator is,
Configurator supports maximum 4 FF online segments, including H1 and HSE. For more than 4 segments, extra upgrade package should be purchased.
CM supports maximum 16 FF segments, including both online and offline.
So, you can use at most two PCI-FBUS/2 card (4 segments) on one PC.
Feilian (Vince) Shen

Which software can i use for recovery management that will allow me to use DVD's instead of Flashdsk

which software can i use for recovery management that will allow me to use DVD's instead of Flashdisk? I find DVD's easier to use. i am using windows 10

As the other posters wrote in order to take a movie file and turn it into a DVD that can be played in standard DVD players you need a DVD authoring application. That you need a separate program to create the DVD is standard procedure and has been that way since the beginning. All Apple produce that can produce video files require an external authoring program. iMovie, iPhoto and Final Cut all do this.
One other thing I will comment on is your choice of output format. You will almost certainly be disappointed with the video quality of your finished DVD if you put a HD video on a SD DVD. Unless you plan to burn a bluray disk you will get a better quality video if you output as SD if you plan to burn to an SD disk.
regards

Which iMovie can i use on a g5 dual processor

which iMovie can i use on a g5 dual processor

According to this:
http://www.macrumors.com/2013/10/22/some-users-with-older-copies-of-ilife-and-iw ork-having-difficulties-upgrading-to-new-versions/
it is available from the App Store for $15. It doesn't show when I launch AppStore but that may be because I already have later versions. You will have to search for it on the web. As part of iLife '09 its pretty old now but Ebay appears to have some copies available.
Best of luck!
Geoff.

AppleCare for Macbook - Which one can I use M8852LL /A or /B ?

AppleCare for Macbook -
Which one can I use M8852LL /A or /B ?
/A is older version /B newer version , I think both are good for Macbook, but can't get a definite answer from Apple. Anyone here know ?
Macbook 1.83 Mac OS X (10.4.7) Combo Drive, 2G, 120G HD

more to say...
Deciding factor should be price.I've found these folks have the best price on AppleCare.
http://lacomputercompany.com
Jim
PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM Mac OS X (10.4.7)

Which card can I use?

Similar Messages

Maybe you are looking for