Which case we go for abap interface?

Hi friends,
As per my understand some scenario's are running with out PI integration.........those are called abap interfaces....
then which case we go for Pi? and which case we go for ABAP interface?
please help me on this...
Thanks & Regards
E.Ravi Chandra Reddy

Hi Ravi,
Understand this way,PI is not only for mapping.It is also used for doing the routing at the runtime.Suppose if you have A coming in the payload it should go to receiver X otherwise Y.
So,depends as per your business requirement.If you just want to integrate 2 system directly.You can go with that but suppose in future you have number of system,you cant do 1:1 connection everytime.At that time you require some middleware to integrate your scenario.
Regards,
Abhi

Similar Messages

Which case to pick for 5G 30gb (and I have the Altec IM7 specker dock)?

I have the Altec IM7 speaker dock (which is GREAT!) but this means I need to remove any case before docking my ipod. I can't decide between the following cases (all of which I have read great reviews on, but I need to know which are the easiest the take off, as I will be doing that frequently...)
I plan to keep the ipod in the case (for scratch & shock protection) when I take it out of the IM7 dock.
Iskin's Evo3 .... which looks the best, but is it hard to remove/put on? I really like the clip and air holes in back.
Speck Products' SkinTight ... easy on/off? will frequent on/off cause problems with the screen protector part (maybe dislodging it, then causing scratches?)
Speck Product's See-Thru ... these look sexy, keeping the shiney look of the ipod, but they are also so new, no reviews around, has anyone got ones? how easy for on/off? will heat build up under the hard cases if on for long periods?
Agent 18's Hard Case ... nice clear look, but how easy for on/off? Heat build up issues?
Thanks in advance for your comments!
- A new Happy Ipod Owner

5G 30GB and 60GB iPods in iSkin's evo3 case fit in Apple's Universal Dock, with no insert.
Easy on; haven't removed it, but it should come off easily.
One quibble: The Hold Switch cover on the case. It takes a certain techniqe with a fingernail on either end of the cover to move the underlying Hold Switch. iSkin doesn't say anything about this in the instructions. Once learned, it's easy to put the iPod on hold.
Recommend.
Bucky

Which case to get for macbook air?

Would a case for the late 2010 macbook air fit a mid 2011 macbook air?

You might try cross-posting over on the iPhone Community and see the response they give on syncing iPhones with Outlook, etc. Can be done, a lot do it.
A lot of us on here are prejudiced in favor of the iPhone...use iPhone, iPad, iPod, iMac, MacBook Pro, etc...so feel strongly that the Apple family works very well together. Syncing between iOS and Mac OS X devices is very good.

FICO overveiw docs for ABAP consultants

hi
can any one
send me FICO overview documents, which are very help for ABAP consultants. if any one will send it , i will get a great help from ur side, because
i am new to the FICO, and iam not the finance background, so iam facing lot of problems
thanks & regards
narendra

FI Financial Accounting
designed for automated management and external reporting of general ledger, accounts receivable, accounts payable and other sub-ledger accounts with a user defined chart of accounts. As entries are made relating to sales production and payments journal entries are automatically posted. This connection means that the "books" are designed to reflect the real situation.
The FI module has 8 sub modules:
FI-GL
General Ledger Accounting
FI-LC
Consolidation
FI-AP
Accounts Payable
FI-AR
Accounts Receivable
FI-BL
Bank Accounting
FI-AA
Asset Accounting
FI-SL
Special Purpose Ledger
FI-FM
Funds Management
CO Controlling
represents the company's flow of cost and revenue. It is a management instrument for organizational decisions. It too is automatically updated as events occur.
The CO module has following sub modules:
CO-OM
Overhead Costing (Cost Centers, Activity Based Costing, Internal Order Costing)
CO-PA
Profitability Analysis
CO-PC
Product Cost Controlling
for tables check out link..
http://www.sapgenie.com/abap/tables_fi.htm
Take a look at this.
http://www.sap-img.com/sap-fi.htm
Please chcek this link and go to SAP R/3 Enterprise Application Components ->
Cross-Application Components -> Financial.
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm

In which cases can the ABAP statement CALL TRANSFORMATION be used?

Hi friends,
here is my questions with options below.
In which cases can the ABAP statement CALL TRANSFORMATION be used? (T/F)
-To transform as iXML document object into and ABAP data structure using
XSLT.
- To transform an XML document contained in a string into another XML
document
using and XSLT program.
- To get canonic XML display of an ABAP data structure.
- To transform an XML document contained in an xstring into another XLM
document using an ST program (Simple Transformation).
- To transform and ABAP data structure into an SML document using ST.
Kindly give me the expalnation to each statement with either True or False.

CALL TRANSFORMATION is a new language element in ABAP that we can use to <b>call up the transformation</b>.
The type of transformation:
XML to XML
XML to ABAP
ABAP to XML or
ABAP to ABAP is already determined by the two additions SOURCE and RESULT in CALL TRANSFORMATION.
Check this link for more details.
http://help.sap.com/saphelp_nw04/helpdata/en/a8/824c3c66177414e10000000a114084/content.htm
Regards,
Maha

Which case in LV Oper. Intf. will do "Run Selected Steps using single pass" for me?

I added a button to simulate "Run Selected Steps", but I really want a button that will "Run Selected Steps Using Single Pass". Which case in the Complex Labview Operator Interface does this for me? What I really want is the report to be generated which happens when I use "Run Selected Steps Using Single Pass" but no report when I select "Run Selected Steps".
Thanks!

I figured out how to make this work. Instead of calling the Sequence File View Manager ConnectCommand method using the Run Selected Steps button and the CommandKind_RunSelectedSteps command kind, you use the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind. The tricky part is that before you can use the ConnectCommand method with the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind, you have to create a set of new commands. Do this by first invoking the Application Manager method NewCommands. This method returns an empty set of commands. You must then add a new command to that set. Do this by invoking the InsertKind method on the empty set of commands using CommandKind_RunEntryPointOnSelectedSteps for cmdKind, Sequence File View Manager for managerControl, -1 for insertBefore, and empty strings for currentMenuName and allMenuNames parameters. Once you have made these calls, then you can call the Sequence File View Manager ConnectCommand method using the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind.
The previous instructions work just the same for the Loop On Selected Steps button. Just substitute the CommandKind_RunEntryPointOnSelectedSteps and CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind constants with CommandKind_LoopEntryPointOnSelectedSteps and CommandKind_LoopOnSelectedStepsUsingEntryPoints_Set command kinds (and of course use the Loop On Selected Steps button reference instead of the Run on Selected Steps button reference when invoking the ConnectCommand method).
There is one mystery with this solution that I haven't figured out yet, besides the fact that it is so laborious and non-intuitive to me (but at least it works). Nowhere in any of the calls detailed above did I ever see a parameter to specify which execution entry point to use. I am using the default sequential model entry points Test UUTs and Single Pass. Typically you specify which entry point you want to use (such as when invoking the ConnectCommand method) in the form of an index to a set of entry points where the Test UUTs entry point corresponds to a set index of 0 and Single Pass corresponds to a set index of 1. How did the previous calls determine which entry point to use when I didn't specify anywhere which one to use? Do this just work because you can only run or loop on selected steps using no process model or the Single Pass entry point?

SLD Application Programming Interface for ABAP-Based Systems

Hi Experts,
Could you help me to configure the connection between SLD ABAP API and the SLD manually?
Why we use SLD Application Programming Interface for ABAP-based systems (SLD ABAP API)?
please help.
Sushama

You have to use transaction SLDAPICUST in the business system to define the SLD access data. This data consists of the host and port of the SLD as well as a user and password (PIAPPLUSER, for example). You can use the entries that you maintained on your Integration Server.
The RFC destinations LCRSAPRFC and SAPSLDAPI are used for the SLD connection. They use the SLD access data maintained with transaction SLDAPICUST. The RFC destination LCRSAPRFC is used to read the exchange profile; SAPSLDAPI is used by the ABAP API.
The RFC destinations are also used to retrieve the information about where to retrieve the information about where to find the Integration Builder required for the proxy generation. This information is located in the exchange profile.
You have to create both RFC destinations in your business system. They use the same registered server program, which is defined as part of the RFC engine settings of the J2EE Engine on the Integration Server host. This means that all business systems can use the same server program for their RFC destinations LCRSAPRFC and SAPSLDAPI. This program ID is:
● SAPSLDAPI_UNICODE for Unicode business systems
● SAPSLDAPI_NONUNICODE
This should help

No implementing class registered for the interface (ABAP interface, request

Hi,
Proxy has been generated for the Inbound Message interface and i could see the SXMB_MONI entry in Red on the target system.
I get the error "No implementing class registered for the interface (ABAP interface, request...."
regards,
Chaitanya

Hi Chaitanya,
Try the below configuration in SXMB_ADM,if you don't have the authorisations to SXMB_MONI ask BASIS guys to do the below activities.
Go to SXMB_ADM.
Execute Integration Engine
EDIT----
> Change Global configuration data
select Role of Business System as Integration Server
Thanks,
Amar.

Which case is the best for the iPhone 6?

So I am just wondering which case would be the best for the iPhone 6. I know that there are plenty of different cases out there. And I would like to get one that doesn't limit the use of the phone. But I also need the case that's good with drops and what not. Not that I make a habit of dropping my phone.

Of course, "best" case is in the eyes of the person using the phone.
Some would say it is an Otterbox, others would say it is a case which does not add too much bulk, others would say it is a case which extends battery life of your device, my daughter says the best case is the one she thinks is the most attractive(and minimizes bulk) and jorgeo_vzw has given his opinion which differs from at least a few of these options.
My best suggestion would be to determine what your usage habits are and choose according to those habits. The best case will not be the same case for everyone.

Which silicone case to buy for Nano???

Hi,
I just received a brand new iPod Nano from Apple. I had one earlier but got it replaced because of faulty display. I am still keeping this one in wrappings because the first one scratched insanely easy...
So this time I will buy a case. Which one should I buy? Does the Ipod Nano tubes sold in applestore protect the display as well? If you know a good silicone cover that protects the display as well, please let me know.
P

I use the ezskin by ezgear, it is a silicone case with a hard screen protector. It works great. It has a belt clip(like the ones on cell phones) it is removable. It also comes with two lanyards, one that is for the wrist and one for the neck. I really use my Nano. It is not a show piece, but a thing that I really enjoy listening to music on. I put it from day one in the case. I have never taken it out of the case and could not tell you if the body is scratched. I did scratch the heck of the hard screen protector, I am waiting for displex, but for now am using a pda protector. It is working fine. As I said I really use it, at least hard enough to scratch the heck out of the hard screen protector. I only took that off, because I wanted to try the pda protector. I could always read my play lists and even see my photos. So I really recomend this case. But I have heard great things about the duo. Just put it in the case and ignore all the scratch mongers. When you use it for what it is intended and just give it the care of a case it is an awesome tool to be used and enjoyed. Hope this helps. P.s. my wife has the same case in black for her black Nano. She is much easier on hers and her screen protector looks like new and she loves it.

For ESS which one is better ? (Webdynpro for Java or Webdynpro for ABAP)

Hello ,
For developing Employee Self Service(ESS) which one is preffered Is webdynpro for java and webdynpro for ABAP ? Why ?
What are the differences ?? Please give me clearly.
Thanks
Risha

Hello Olivier ,
Thank you for gvg quick reply.
For dessert which one is preferred : apple pie or chocolate pudding ? - I am not able to decide
Actually I have requirement for developing ESS in Portal. I am new to ESS and heard presently using WDA for ESS.
I did't get reasons why using WDA. basically I am from WD for Java.
If possible give me differences.
Thanks
Risha

Which case offers the best protection for ipad2 I have tried the SURVIVOR but the little rubber things protecting the ports have broken offthanks

Which case offers the best protection for the ipad2 I have tried the Survivor however the pieces protecting the ports has ripped off. Any suggestions?

You had to have some kudos for the effort put in to your thread as week as the point you make.

For Wht/ In which cases we use EKES - Vendor Confirmations?

Hi Experts,
Pls. let me know that, For Wht/ In which cases we use EKES - Vendor Confirmations?
thanq

hi use this...,
PO Change - Confirmation
regards,
venkat.

Interface/class which can be used for obtaining exchange rates of currency

Is there any interface or class in the java package which can be used for obtaining current exchange rates of currencies ?

Yes. The people at Sun change the static fields every day to reflect the current prices on the world currency markets at GMT 12:00. Then every day all the java programmers around the world reinstall a new JDK that contains the updated class. The class is called:
EuroDollarDollarEuroDollarYenYenDollarYenEuroEuroYenRubleDollarDollarRuble
To access the Euro-Dollar exchange rate, you write:
EuroDollarDollarEuroDollarYenYenDollarYenEuroEuroYenRubleDollarDollarRuble.EURODOLLAR

Which SAP Solution Manager is preferable for ABAPER

Hello,
I am interested in SAP Solution Manager.
I am able to see 3 kinds in SAP Certifications. Which would be preferable to ABAPer
Thanks
Prashanth.

Hi Prasad,
If you are trying to install an R/3 SAP version ( highly unlikely as we already have ECC 6.0 and hardly new installations are on 4.7 etc) you would not require a Solman.
But if you are trying to connect to a R/3 system you sure can connect and require a solman to monitor or generate EWA etc...
If you have any other specific query please put it forward clearly.
Hope it helps - award points if helpful.
Rgds,
Sri

Which case we go for abap interface?

Similar Messages

Maybe you are looking for