Which change pointers should I activate for PDS'

Hi Gurus,
I have a scenario where I am creating PDS' from only BOMs in ECC. I have set up integration models for all the necessary BOMs. The Initial transfer worked seamlessly. I have made a few changes to BOMs in ECC and I noticed that the change flag in CURTO_PDS_CHG table is not being set. But when I create new BOMs, the change flag in CURTO_PDS_CHG is being set. As a result, I am not able to do a change transfer for PDS.
I believe this is happening because I have not activated the relevant change pointers for PDS. And I can not find relevant change pointers for PDS that I need to activate. Is any standard message type that I can activate (in transaction BD50) for ensuring change transfer for PDS takes place?
The only change pointer( or message type) that looks relevant to PDS change transfer is -
1) CIFRTO_INFREC - APO-CIF: Change Production Data Structure Extl. Processing
But this message type does not have any tables/fields assigned in transaction BD52. If I have to use this message type for capturing changes to PDS', Do I have to maintain all the tables/field names for this message type? Isn't there any standard Message type that I can use?
Thanks in advance for your responses.

Hi. Will,
Thanks for the response. I have active integration models for Plant, Material and BOMs. I do not need routing or recipe or even production version in APO as I am transferring the BOMs to APO for a DP-BOM planning area.
And I am afraid the ECC system does not create relevant change pointers (relevant to CIF change transfer) when BOMs change. I think the table CURTO_PDS_CHG needs to be updated when a change takes place, for CIF to identify changes to BOMs and transfer them. Currently, ECC only updates the CURTO_PDS_CHG table when I add a new BOM to the integration model.
I did try to activate the message type CIFRTO_INFREC by adding various field form MAST, STPO etc in transaction BD52. But CURTO_PDS_CHG is still not updated when a change takes place in a BOM and hence the change is not transferred to APO. Is there anything that I am missing here?? Any help is appreciated.

Similar Messages

HT4839 Which apn setting should I use for my iphone 4 on net10

Which apn setting should I use for iphone 4 on net10

APN Settings for Net 10
Cellular Data
APN: att.mvno
Username: (Blank)
Password:(Blank)
MMS (Blank)
APN: att.mvno
Username: (Blank)
Password: (Blank)
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Max Size: 1048576
MMS UA Prof URL: www.apple.com/mms/uaprof.rdf
Type exactly whats on here on your settings.
Procedure:
1- Turn on your phone
2- Get paperclip take out tray and put your non working sim card in- T-moble and simple mobile sim cards work great for me on this venture.
3. Goto Settings>General>Cellular>Cellular Network
At this point its very critical that you do this fast, Once you change the sim card to your net 10 the option Cellular Network will only stay on for a few seconds while it's searching for service. You will need to click on cellular once the Net10 sim card is in and click on Cellular network again.
4. Get your paperclip take out the tray put in the Net 10 sim card
5. Goto Cellular>Cellular Network while it's searching for service
6. Type in your settings that I list above
7. Scroll back to your main setting (Do not press your Home Button)
8. Once you see your service up and running try out your web and send a picture message it should work.
9. If it does'nt work you mistype one of the settings, it has to be exact or it wont work.
10. Do the process all over again
Keep this information and the sim card away for a later date in case you lose your setting I have'nt turned off my phone or let my battery die to find out if I lose my settings. One thing for sure I lost it when I update to the IOS 6.0.1.

Which animation software should I go for?

I have FCP 4 and I want to add some backgrounds like a big greek building or walking on the rainbow... I assume I need to make those kind of backgrounds on my own? If so, which animation software should I go for to create those kind of landscape background?? Or there may be some program that already has designed background?? Please let me know. I am learning through on my own.

lol - Throw them in the deep end with the easy stuff first, huh Shane ?
Have a google for video backs from Artbeats, Jump Backs, Corbis and so on - you may find some stock stuff there to use. It's not cheap.
To learn an app like Maya is a whole other thing and others like Cinema 4D, lightwave etc, etc - developing the craft of 3D compositing is something that takes an enormous amount of time and patience. These are apps I have looked at and have never, ever found the time to be able to learn them past the most basic understanding. But if you have the inclination then go for it !
If you have a fast current pc then you might like to look at the stuff from Serious Magic - some precomps there that might fit the bill.

Which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use it for hometheater and HD movies.

which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use this for hometheater and HD movies.

Intel HD 3000 graphics card can easily handle HD movies up to 1080p. But if you are looking at higher resolutions possibly 4k or 8k that are being released this summer in new TV's, I would go with the AMD card. The AMD card would be good for video and picture applications and also games. But if this is strictly to power your 1080p home theater setup then the choice is obviously the Intel HD 3000.

Which JRE / J2SE should be installed for tomcat 5.5?

Does anyone know which JRE / J2SE should be installed for tomcat 5.5? Could anyone please give me the link for download?
Thank for any suggestion
Eric

Does anyone know which JRE / J2SE should be installed
for tomcat 5.5? Could anyone please give me the link
for download?http://java.sun.com/javase/downloads/index.jsp

Which kernel module should I use for Marvell Yukon 88E8001?

Which kernel module should I use for Marvell Yukon 88E8001?
a. sky2
b. skge
c. sk98lin

I found this in the kernel''s /driver/net/Kconfig:
config SKGE
tristate "New SysKonnect GigaEthernet support"
depends on PCI
select CRC32
---help---
This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
and related Gigabit Ethernet adapters. It is a new smaller driver
with better performance and more complete ethtool support.
It does not support the link failover and network management
features that "portable" vendor supplied sk98lin driver does.
This driver supports adapters based on the original Yukon chipset:
Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
It does not support the newer Yukon2 chipset: a separate driver,
sky2, is provided for Yukon2-based adapters.
To compile this driver as a module, choose M here: the module
will be called skge. This is recommended.
Looks like your module is "skge"

Which jdbc driver should be used for sqlserver 2000 and where to put it.

hi all,
My odi is 11g. I met the error infor "Could not load JDBC driver class [com.microsoft.sqlserver.jdbc.SQLServerDriver]" when i tried to connect to a sqlserver2000 database.
The questions are:
1. which jdbc driver should be used for sqlserver 2000?
2. which folder to put it in?
3. how to set the physical topological "Microsoft Sql Server" to use this jdbc driver?
failed tries:
i downloaded the driver "SQL Server 2000 Driver for JDBC Service Pack 2" and put it in the following folders:
1. .../oracledi/drivers, and set this path to CLASSPATH.
2. .../oracledi/userlib didn't exist, i created it and put the driver in.
3. .../oracledi/agent/dirvers, in which a readme file exists and told me to put drivers in this folder.
All these works were not useful. when I start odi.sh and try to connect to sqlserver2000 database, the same error infor came up.
my environment is:
os: Linux 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
java: Java(TM) SE Runtime Environment (build 1.6.0_13-b03) Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02, mixed mode)
ODI: 11g, installed in /users/oracle/odi/
please help me,thanks a lot.
jun
帖子经 Jun编辑过

Hi,
You should check which JVM version is required by that version of the driver, I think the 2.x versions require a 1.6 JVM
What error are you getting? If it is the "com.sunopsis.sql.c: No suitable driver", it indicates it can't find the jar file (sqljdbc.jar) for the driver you specify.
Drivers folder in ODI 11g is under
C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers.
if you are using the standolone version
On windwos :
C:\Documents and Settings\<userName>\Application Data\odi\oracledi\userlib
on linux
$HOME/.odi/oracledi/userlib
Have a read of :- http://download.oracle.com/docs/cd/E14571_01/core.1111/e16453/install.htm#CHDBIFAJ
Thanks,
Sutirtha

Change Pointers not being created for HR-PA Custom Infotype

Problem Description:
We have a custom Infotype in SAP to store the data for contingent employee - Infotype 9001. Change pointers is
turned on. We are running the program RBDMIDOC to send changes to Oracle IDM using message HRMD_A. The change
detected for all infotypes except 9001. For 9001, the change pointer is not created.
The following are the current configuration details:
IDOC Extension Created to Idoc type HRMD_A07 (ZHR_EXT)
custom segment zhr_seg
Change pointers are switched on.
Change pointers switched on for message Type HRMD_A.
IDOC configuration created for Port / Process code etc.
Maintenance of view T777D - Added ZHR_SEG.
If I add the segment ZHR_SEG as a 2nd segment to Infotype 0000, I dont get a syntax error. But the changes for Infotype 9001 are not picked up.
If I add the segment ZHR_SEG as a segment to Infotype 9001, I get a syntax error - check EDI: Syntax error in IDoc (mandatory segment missing) below.
EDI: Syntax error in IDoc (mandatory segment missing)
Message no. E0072
Diagnosis
The segment ZHR9001 has the attribute 'Mandatory' in the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
This error may have been triggered by an unidentifiable segment before the expected mandatory segment.
Procedure
Please check the IDoc or the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT).

Were you able to resolve the issue?
If yes, could you please share what was done to resolve it.
Your help will be greatly appreciated.

Which MacBook Pro should I go for? Which will complete my needs?

I wanted to buy a MacBook Pro for school in September. I was just curious on which model I should go for.
I need to do the following:
- I need to be able to run accounting software (Simply Accounting).
- I need to be able to Skype with friends/family.
- I need to be able to run Adobe Suite CS5+.
- I would like to create a home studio surrounded around this new computer.
- I would like something portable and durable. I need to be able to carry this laptop everyday and it's going to be used in an environment that is more or less abusive.
- I would also like a CD drive (I still find myself using CDs every once in a while).
- And I would like to get a nice screen, the stock screen is fine on the 13 inch, but I would need the upgrade on the 15 inch.
So, basically;
Option 1: 15 inch MacBook Pro base (no extras)
Option 2: 13 inch MacBook Pro with an Intel 520 240GB SSD + 8GB RAM
Option 3: Wait until June/July for the next generation of MacBook Pro's.
Which would you guy do?
Thanks.

Skip the 13", does not have the audio I/O you will need. The 15" with as much ram as you can afford. You can wait, keeping in mind that you will spend time working bugs ou, depending how Apple rearranges the "furnature yet again. I have a 15" running SnowLeopard as my music production, as I do a lot of live, and it is VERY stable. (can't afford issuses) I have a 13" Bare bones for doing light duty stuff and I'm to lazy to lug the big 15" bag of cables/adapters... with me. Best of luck, hope I helped, and did not confuse you too much. All the Best

Which HttpClient class should I use for Universal apps?

Hi,
I am developing a Windows Universal app for Windows phone and WinRT in C# and I would like to know which HttpClient class should i use? Should I use the System.Net.HttpClient or Windows.Web.HttpClient?

Because the System.Net.Http and System.Net.Http.Headers namespaces might not be available in future versions of Windows for use by Windows Store apps. It is stated in the official documentation on MSDN here:
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/dn469431.aspx
"Starting with Windows 8.1 and Windows Server 2012 R2, use Windows.Web.Http.HttpClient in the Windows.Web.Http namespace and the related Windows.Web.Http.Headers and Windows.Web.Http.Filters namespaces instead for Windows Store apps."
And the Windows.Web.Http.HttpClient class is supported from Windows Phone 8.1, Windows 8.1 and Windows Server 2012 R2:
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/windows.web.http.httpclient.aspx
Hope that helps.
Please remember to close your threads by marking all helpful posts as answer and then start a new thread if you have a new question.

Which adobe version should be downloaded for a kindle fire 7 hd with linux?

which version of adobe should be downloaded for a kindle fire 7 hd with linux?

To the best of my knowledge you are restricted to what ever applications from the Kindle store. There are few Adobe products other than Reader that have been approved by Amazon for their store. In fact, they offer more apps on their andriod store for other manufacturers than they do on their own Kindle store.

Which g4 model should I look for?

Hi, I need a Mac, essentially to run Avid and Final Cut Pro. I would love to get a g5, but I'm on a tight budget, so I am thinking about picking up a cheap G4 and upgrading it as best as I can. I have never had a Mac before and really don't know much about the hardware, what type of G4 should I look for, and what upgrades would I need if I plan to use it mostly for editing?

Welcome to Apple Discussions!
The last G4 machines were by far the best. They were also by far the noisiest. Some have even called them the windtunnel. But they and the last generation QuickSilver G4s were the only ones that could use 500 GB Parallel ATA hard drives without partitioning. As far as I know no 1 TB Parallel ATA drives exist, but Firewire ones do exist. Partitioning restricted the amount of installed software on the boot section of the hard drive.
MDD G4s without Firewire 800 could also boot into 9 but had to use the original airport wireless, and so could QuickSilvers, but MDD G4s with Firewire 800 could use Airport Extreme wireless, and could only use Classic. Those which could only use Classic have no 9 support under 10.5, but could continue to use Classic under 10.4. Booting into 9 offered better Mac OS 9 driver support than Classic, which acts like a 9 emulator. No PowerMac G4 desktop offered built-in USB 2 support, only USB 1.1 support exists for them. iMac, eMac, aPowerbook G4s and iBook G4s after September 2003 offered USB 2. Firewire also known as IEEE 1394 is even faster than USB 2 in its earlier iteration even though specs don't suggest that it is, because of issues of sharing with other Firewire devices.
Suggest you visit:
http://support.apple.com/specs/#powermac
For a better sense of what's available to you.

Which antivirus software should i use for my iMac

Hello,
Wondering which antivirus software is recommended by Apple for an iMac?
Thanks,
Lisa C.

VIRUSES
No viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions.
It is possible, however, to pass on a Windows virus to another Windows user, for example through an email attachment. To prevent this all you need is the free anti-virus utility ClamXav, which you can download for Tiger from:
http://www.clamxav.com/download.php#tiger
and for Leopard, Snow Leopard and Lion from here:
http://www.clamxav.com/
Note: If you wish to uninstall ClamXav: keep a copy of the disk image from when you downloaded it, or download it again - the uninstaller is included with the application. To uninstall, quit ClamXav Sentry (if you use it) and make sure it's not set to launch at log in. The uninstaller will remove the engine and any schedules you've got set up, then just drag ClamXav.app to the trash.
If you are already using ClamXav: please ensure that you have installed all recent Apple Security Updates and that your version of ClamXav is the latest available.
Do not install Norton Anti-Virus on a Mac as it can seriously damage your operating system. Norton Anti-Virus is not compatible with Apple OS X.
FAKE ANTI-VIRUS SOFTWARE and associated MALWARE
Do not be tricked by 'scareware' that tempts computer users to download fake anti-virus software that may itself be malware.
Fake anti-virus software that infect PCs with malicious code are a growing threat, according to a study by Google. Its analysis of 240m web pages over 13 months showed that fake anti-virus programs accounted for 15% of all malicious software.
Scammers trick people into downloading programs by convincing them that their PC is infected with a virus.
Once installed, the software may steal data or force people to make a payment to register the fake product.
Beware of PDF files from unknown sources. A security firm announced that by its counting, malicious Reader documents made up 80% of all exploits at the end of 2009.:
http://www.computerworld.com/s/article/9157438/in which Rogue_PDFs_account_for_80_of_all_exploits_says_researcher
TROJANS and RE-DIRECTION TO FAKE WEBSITES
The appearance of Trojans and other malware that can possibly infect a Mac seems to be growing, but is a completely different issue to viruses.
If you allow a Trojan to be installed, the user's DNS records can be modified, redirecting incoming internet traffic through the attacker's servers, where it can be hijacked and injected with malicious websites and pornographic advertisements. The trojan also installs a watchdog process that ensures the victim's (that's you!) DNS records stay modified on a minute-by-minute basis.
You can read more about how, for example, the OSX/DNSChanger Trojan works (by falsely suggesting extra codecs are required for Quicktime) here:
http://www.f-secure.com/v-descs/trojan_osx_dnschanger.shtml
SecureMac has introduced a free Trojan Detection Tool for Mac OS X. It's available here:
http://macscan.securemac.com/
First update the MacScan malware definitions before scanning. You can also contact their support team for any additional support - [email protected]
The DNSChanger Removal Tool detects and removes spyware targeting Mac OS X and allows users to check to see if the trojan has been installed on their computer; if it has, the software helps to identify and remove the offending file. After a system reboot, the users' DNS records will be repaired.
(Note that a 30 day trial version of MacScan can be downloaded free of charge from:
http://macscan.securemac.com/buy/
and this can perform a complete scan of your entire hard disk. After 30 days free trial the cost is $29.99. The full version permits you to scan selected files and folders only, as well as the entire hard disk. It will detect (and delete if you ask it to) all 'tracker cookies' that switch you to web sites you did not want to go to.)
A white paper was published on the subject of Trojans by SubRosaSoft, available here:
http://www.macforensicslab.com/ProductsAndServices/index.php?main_page=document_ general_info&cPath=11&products_id=174
Also, beware of MacSweeper and MacDefender (also goes under the name of MacProtector, MacGaurd, MacSecurity or MacShield) :
These are malware that misleads users by exaggerating reports about spyware, adware or viruses on their computer in an attempt to obtain payment.
Mackeeper is equally worthless and should also be avoided. Again, the developer seeks to obtain payment for an application that does nothing that free utilities do not also offer, and in many cases it will also mess up your system.
You can keep up to date, particularly about malware present in some downloadable pirated software, at the Securemac site:
http://www.securemac.com/
HOW TO AVOID RE-DIRECTION
Adding Open DNS codes to your Network Preferences, should give good results in terms of added security as well as speed-up:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
There may be other ways of guarding against Trojans, viruses and general malware affecting the Mac, and alternatives will probably appear in the future. In the meantime the advice is: be careful where you go on the web and what you download!
WHAT TO DO IF YOU THINK YOUR MAC HAS BECOME 'INFECTED'
If you think you may have acquired a Trojan, and you know its name, you can also locate it via the Terminal:
http://theappleblog.com/2009/04/24/mac-botnet-how-to-ensure-you-are-not-part-of- the-problem/
Although any content that you download has the possibility of containing malicious software, practising a bit of care will generally keep you free from the consequences of anything like the DNSChanger trojan.
1. Avoid going to suspect and untrusted Web sites, especially p'orn'ography sites.
2. Check out what you are downloading. Mac OS X asks you for you administrator password to install applications for a reason! Only download media and applications from well-known and trusted Web sites. If you think you may have downloaded suspicious files, read the installer packages and make sure they are legit. If you cannot determine if the program you downloaded is infected, do a quick Internet search and see if any other users reported issues after installing a particular program.
3. Use an antivirus program like ClamXav. If you are in the habit of downloading a lot of media and other files, it may be well worth your while to run those files through this AV application.
4. Use Mac OS X's built-in Firewalls and other security features.
5. Peer-to-peer sharing applications and download torrents (such as the now defunct LimeWire) supplying pirated software, movies etc are hotbeds of potential software issues waiting to happen to your Mac. Everything from changing permissions to downloading trojans and other malicious software can be acquired from using these applications. Similar risks apply to using Facebook, Twitter, MySpace, YouTube and similar sites which are prone to malicious hacking: http://news.bbc.co.uk/1/hi/technology/8420233.stm
6. Resist the temptation to download pirated software. They can contain Botnet Trojans. SecureMac offer a simple and free tool for the removal of the iBotNet Trojan available here:
http://macscan.securemac.com/files/iServicesTrojanRemovalTool.dmg
YOUR PRIVACY ON THE INTERNET and the latest risks to look out for:
There is the potential for having your entire email contact list stolen for use for spamming:
http://www.nytimes.com/2009/06/20/technology/internet/20shortcuts.html?_r=1
And if you are using iPhone Apps you are also at risk of losing all privacy:
http://www.engadget.com/2010/10/03/hacker-claims-third-party-iphone-apps-can-tra nsmit-udid-pose-se/
The advent of HTML5 may also be a future threat to internet privacy:
http://www.nytimes.com/2010/10/11/business/media/11privacy.html?_r=1&hp
Security of OS X generally:
http://www.apple.com/macosx/what-is/security.html
http://www.nsa.gov/ia/_files/os/applemac/I731-007R-2007.pdf
Security Configuration for Version 10.5 Leopard:
http://manuals.info.apple.com/en_US/Leopard_Security_Config_2nd_Ed.pdf
NOTE: Apple's Snow Leopard and Lion operating systems silently update the malware protection built into Mac OS X to protect against a backdoor Trojan horse that can allow hackers to gain remote control over your treasured iMac or MacBook: Macs running Snow Leopard or Lion now check for new malware definitions daily, allowing Apple to quickly deploy protection from threats before they have a chance to spread.
Few malicious titles actually exist for Mac OS X, and those that do rely almost entirely upon duping users to install software that pretends to be legitimate.
http://www.sophos.com/blogs/gc/g/2010/06/18/apple-secretly-updates
However, if you are running Lion Server:
Apple's new server operating system -- OS X Lion -- is so inherently insecure that Stamos recommends keeping it off the network altogether and using Macs only as standalone machines connected to IP or Windows networks, not those designed for Macs.
The Mac Server's networking protocols -- especially DHX User Authentication -- are designed for ease of use, not security. It is trivial, Stamos said, for hackers to set up a Mac user to download a file that will overflow the buffer protecting the heap segment of the server's memory, allowing the file's malicious payload to run uncontrolled in the server's memory and give itself whatever access rights it wants.
http://www.macworld.co.uk/mac/news/index.cfm?newsid=3301796&olo=email

Which compressor preset should I use for dvdsp "2hour movie".

Which compressor preset & settings should I use to fit a 2 hour QT movie from fcp onto 4.7gb single layer dvd in dvdsp.
Thanks in advance,
Zia

The 120 Minute preset is for two hours, but you may want to bring the average down and the high rate also.
Take a look here for some info (make use to use AC3 and not aif audio)
http://dvdstepbystep.com/faqs_7.php
http://dvdstepbystep.com/faqs_3.php
http://dvdstepbystep.com/qc.php
http://dvdstepbystep.com/fasttrackover.php

Which BUs Object should I use for archiving and linking to SalesDocuments

Hi,
I want to archive documents and link them to SalesDocuments, but I don't know which BUsiness Object I should use. Special Ones like BUS2030, BUS2031,... or the general Type VBAK. If I use VBAK I have the problem, that when I archive manually all with VBAK linked documenttypes are proposed, so that I can't control, which documents are allowed to be linked with for instance CustomerQuotation or SalesOrder.

Hello Marc,
For Sales Order user object type as BUS2032
Customer Quotation- BUS2031
Customer Inquiry - BUS2030
BUS2033          Customer complaint order
BUS2034          Customer Contract
BUS2035          Customer scheduling agreement
BUS2051          Customer outline agreement
BUS2094          Credit memo request
Hope this will answer your question.
-Thanks,
Ajay

Which change pointers should I activate for PDS'

Similar Messages

Maybe you are looking for