Which Cisco 89X Wireless model for Europe (N,E or A)?

Hi all,
Can anyone tell me which model of the three I should used for Europe:
CISCO891W-AGN-N-K9
CISCO892W-AGN-E-K9
CISCO891W-AGN-A-K9
Thanks in advance.
Regards,
Laurent

E is the one.
Here is a full list of countries in each domain:
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a_ps10981_Products_Data_Sheet.html
Please Make sure to rate correct answers

Similar Messages

Is there a "Cisco Recommended" wireless headset for the SPA 504G Phones?

Hello, Is there a "Cisco Recommended" wireless headset for the SPA 504G Phones?
Please let me know. Thank you, Paul

Hi Paul,
My recommendation would be the "Plantronics Savii 700 series" which have worked consistently and without issues, you need the HL-10 Handset lifter with them which work with the SPA-500 series.
The Savii series come as DECT for when you are using it with a phone (Waaaaaaaaaaaaaay better reception than Bluetooth) and Bluetooth for when you have it synced with a computer at the same time, it also comes with combination headset connectors so you can have one over the head, or around the neck or even just hanging over the ear.
I fully recommend them with the 500 series phones.
Cheers,
David.

Which switch model for more than 4 10G-Ports?

we have a little network (100 clients, 1 VMware-Cluster with 2 Hosts, 1 Storage) and we want to replace old switches.
we want to connect 4 cisco catalyst 2960X to core switch with 10G, and 4 2960X with 1G.
Core switch is main routing instance for all.
So we need following features for the core switch:
- 8 10G-Ports
- Redundancy
- Static Routing
Which is the cheapest model for core?
Thanks!
Martin

I'm not sure if you get it "cheap" ...
You could use:
A stack of 2*WS-C3650-48TQ (each has 4*10GE)
A stack of 2*SG500X-24 (each has 4*10GE)
one or two SG500XG-8F8T (each has 8*10GE copper and 8*10GE SFP+)
2) and 3) are from the SmallBusiness line of switches. So option 2) will probably the cheapest.
Edit: Just looked at the stacking of the 500X. Seems that the 10GE-ports are used for stacking, so you would need four of them to get eicht usable 10GE-Ports. It still could be cheaper then the 3650, but probably not better ...

Local RADIUS in AP1242 with non-cisco WinXP wireless clients

I'd like to configure local RADIUS in AP1242 and connect non-cisco WinXP wireless clients (for example notebook with integrated radio) with it. I did configuration (config1.txt) like in instruction: http://cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c0912.shtml
But I can't connect non-cisco WinXP wireless client with AP1242 anyway. At once Cisco wireless client with Aironet Desktop Utility connects with it without any problem. I've done some other configuration (config2.txt), but with the same result. Second configuration is rather then first.
How can I connect non-cisco WinXP wireless clients with AP1242 with local RADIUS?

Hi Stephen,
Thanks for the quick reply. Below is the switchport config. I am able to ping the AP from the switch and connect to its web page from any workstations.
interface GigabitEthernet0/5
switchport trunk encapsulation dot1q
switchport trunk native vlan 151
switchport mode trunk
end

Cisco Model 870 router for home office connected to WRT160NL wireless router for personal use

I am using a Cisco Model 870 router for home office. I just bought a WRT160NL wireless router for home use. I setup the personal wireless router off the personal port of the 870 and can connect with my PC but not with my MAC machines. It can see the Network but when it asks me for passwords, it says they are wrong, which after several attempts I know they are correct.
The new router is setup as WPA2 personal. Can you advise?
Cisco Account Manager- Services

I think I answered my own question. I tried downloading something on my desktop and checked my cellular usage afterwards didn't go up so it's using my home internet and not my data plan.

How to replace the certificate of Cisco 2106 wireless LAN controller for CAPWAP ?

I have interested in CAPWAP feature and I download the open capwap project to make Access Controller (AC) and Wireless Terminal Point (WTP). I had built the AC which used PC and WTP which used Atheros AP. The CAPWAP feature work well when I enabled the CAPWAP that used my own AC and WTP. When I got the Cisco 2106 wireless LAN controller (Cisco WLC), I configured the Cisco WLC to instead my own AC but I got the authorize fail in Cisco WLC side. It seem the Cisco WLC could not recognize the CAPWAP message which sent form my own WTP. I think this issue just need to synchronize the certificate between Cisco WLC and WTP.So I need to replace the Cisco WLC's certificate manually. Does anyone know how to replace the certificate manually with Cisco WLC ?
Best Regards,
Alan

Unfortunately this Support Community is for Cisco Small Business & Small Business Pro product offerings. The WLC2106 is a traditional Cisco product. You can find this type of support on the Cisco NetPro Forum for all traditional Cisco products.
Best Regards,
Glenn

Which cisco wireless bridges support point to multipoint

hi all i am really new to wireless. i am looking for information as which cisco wireless bridges support point to multipoint configuration.
i have a cisco 1230G access-point will it support the same .
any help would be great.
regards
sushil

The Cisco 1300's and 1400's support point-to-point and point-to-multipoint. The 1230G can only support point-to-point (i think)
http://www.cisco.com/en/US/products/hw/wireless/ps441/products_qanda_item09186a0080094644.shtml#q20

Which Image should we need for the below model router 2951 to support 4 Byte ASN number ?

Hi All,
Which Image should we need for the below model router 2951 to support 4 Byte ASN number ?
CISCO2951/K9
Cisco 2951 w/3 GE 4 EHWIC 3 DSP 2 SM 256MB CF 512MB DRAM IPB
PWR-2921-51-AC
Cisco 2921/2951 AC Power Supply
CAB-ACSA
AC Power Cord (South Africa) C13 BS 546 1.8m
HWIC-BLANK
Blank faceplate for HWIC slot on Cisco ISR
ISR-CCP-EXP
Cisco Config Pro Express on Router Flash
MEM-2951-512MB-DEF
512MB DRAM (1 512MB DIMM) for Cisco 2951 ISR (Default)
MEM-CF-256MB
256MB Compact Flash for Cisco 1900 2900 3900 ISR
SM-S-BLANK
Removable faceplate for SM slot on Cisco 290039004400 ISR
SL-29-IPB-K9
IP Base License for Cisco 2901-2951
S2951UK9-15501T
Cisco 2951 IOS UNIVERSAL
EHWIC-1GE-SFP-CU
EHWIC 1 port dual mode SFP(100M/1G) or GE(10M/100M/1G)

> Can someone suggest ?
a forum is no realtime-communication ... ;-)
For the ISR G1, it was supported from 12.4(24)T, so I would assume that your ISR G2 has this feature if you are running 15.x.
EDIT: The Feature-navigator says that it's supported starting with 15.1(2)T.

My Time Capsule has stopped backing up. I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html

I just set up an Optus Cisco DPQ3925 wireless router to access higher speed internet I signed up for. I have a 4th gen airport extreme I want to put in another room and use as a wifi extender the wifi but I get an error message each time I try. Help?

Hello all.
I have just set up a new cisco DPQ3925 wireless router that Optus sent me to be able to access the higher speed internet I have signed up for.
I have a 4th gen apple extreme that I want to use to extend the wifi but when I try to update the settings via the airport utility I get a message that says it cannot do so, and to check it is in range and the wifi is set up correctly. I'm not experienced with these things but I can't think what I have done wrong.
Is anybody able to help me please.

You cannot use the AE to extend wireless from a non apple router such as your cisco modem router.. they are not compatible..
You need to tie to the two devices together either with ethernet or something like EOP adapters.. They are about $120 and you can price match in officeworks.

Which wireless adaptor for my macpro?

Hey everyone. Can someone please advise me on the best wireless card (usb/pci) to use for my macpro, details of which are -
Quad 2.0 gig
10.4.10v1.1
3gigs ram
Can't think of any other info you would need really. Another thing, and perhaps this might be asking much but would there be a wireless card/adaptor thingy that works both on my Mac OS and when switch over to Windows which is regularly?
Thanks for your help chaps and chapettes.
Dev.

I'm in the same boat...kicking myself for not getting the wireless option built-in when I ordered mine last year. Anyway, what do you mean by long range? I have a two story hours and my router (Airport Extreme) is on the 2nd floor left-hand side with my MP plugged into it today. Tomorrow, I will relocate my MP to the 1st floor right-hand side of my house. If I had to guess, I would estimate 20 - 25 meters in a straight line through walls and a ceiling. I currently have a TiVo downstairs with access but this might be a bit further. What do you think my options are? I’m just wondering if I should carry my MP to the nearest Apple Store and have them install the wireless option. I guess I could get another AirPort Extreme and put it next to my MP?

Which wireless speakers for Imac and how?

I'm buying the airport express router today. I know it can stream music wirelessly to remote speakers. My question is: what are some good speakers I can buy and how do I configure them to receive the i-tunes music in my library?
Do I need powered speakers? Thanks in advance for any suggestions or help.

Which speakers you get is subjective. There are plenty available. (I use Harmon Kardon SoundSticks II that I find pretty good for room-filling sound.) However, you do need to make sure that they are powered (or fed through an amplifier).
Plugging them into the AirPort Express should make them appear in iTunes at the bottom of the main window - look for "Computer" in a pop-up that you can change to your AirPort Express speakers.
It's pretty straightforward, but if you get stuck post back here
PS The AirPort Express handles the wireless part for you - you don't need wireless speakers.

Cisco wireless supplicant for Windows 7

Does anyone know if there is a beta version of the CSSC wireless supplicant for Windows 7?

There is no beta version of CSSC for W7 yet. However it's in the pipeline and will be coming out.
We cant communicate you publish dates on netpro.
Please contact your cisco sales team or partner to get a more precise date.

Home Use for the Cisco 1230 AG Model

Hi, Does anyone have instructions for using the Cisco 1230 AG Model at home i.e. using Home DSL or a Cable? So far, I assume I can hook a router into the cable modem, and
hook the AP into the router. Then, the AP will act as a DHCP server? If someone can help or point me to a doc, that would be great.

The router will act as a DHCP server, not the AP. Set up a DHCP scope on the router and put the AP on the router with a static address in the range of (but not the DHCP scope of) the vlan.
for example, assume a 192.168.1.0 /24 subnet.
network is x.x.x.0
gateway is x.x.x.1
AP is .2 thru .10 (in case you want more!)
These are statically assigned
DHCP on router should be configured starting at .11 or above

Hi all! I need to buy iPad tomorrow. Need your advice which iPad to buy? For almost the same money I can buy iPad 2 3g or iPad 4 wireless only. Both of them are 16gb and price difference is 70€ for iPad 4

Hi all! I need to buy iPad tomorrow. Need your advice which iPad to buy? For almost the same money I can buy iPad 2 + 3g or iPad 4 wireless only. Both of them are 16gb and price difference is 70€ for iPad 4

16GB vs 32GB vs 64GB: Which new iPad storage capacity should you get?
http://www.imore.com/2012/03/08/16gb-32gb-64gb-ipad-capacity/
How much content will fit on my iPod or iPhone?
http://support.apple.com/kb/HT1867
iPad Mini vs. iPad 2 vs. iPad 4: Which iPad Should You Buy?
http://www.padgadget.com/2012/10/25/ipad-mini-vs-ipad-2-vs-ipad-4-which-ipad-sho uld-you-buy/
 Cheers, Tom

Which Cisco 89X Wireless model for Europe (N,E or A)?

Similar Messages

Maybe you are looking for