Which CISCO switch supports SFP, SFP+ and 10G ethernet ports

I would like to have information about a CISCO switch which can support fiber ports SFP(1g) and SFP+(10g) and copper 1g and 10g ethernet ports. And will it also software upgradable to support L3 protocols ?

You can choose from the Cisco 3560-E, 4900, 4500, and 6500 series switches. That's in order of capability (and cost!), from least to greatest.
The 3560-E and 4900 series are fixed chassis systems (the 4900M is semi-modular) while the 4500 and 6500 series are completely modular - buy the chassis and populate it according to your requirements.
In addition to the references cited above, also refer to the Cisco Products Quick Reference Guide (CPQRG), available at http://www.cisco.com/en/US/prod/qrg/index.html
Hope this helps. Please rate this post if it does.

Similar Messages

  • Cisco 1900 switch support vtp version2 and etherchannel or not?

    cisco 1900 switch support vtp version2 and etherchannel or not?
    Please help and reference.
    Thank in advance

    Hello,
    Fast Etherchannel is supported on 1900 switches.
    Please refer the below URL for details:
    http://www.cisco.com/univercd/cc/td/doc/product/lan/28201900/1928v9x/ee_scg/overview.htm#xtocid72765
    I "think" you need to have Enterprise Edition Software. In case if you have a standard version, then you need to purchase the upgrade kit to upgrade to enterprise version.
    As far as I know, VTP V2 is not supported on the 1900.
    By the way, 1900 swiches are End of Sale and the last date of support is July, 2007.
    http://www.cisco.com/en/US/products/hw/switches/ps574/prod_bulletin09186a008009257d.html
    I hope it helps.
    Regards,
    Arul

  • Cisco IOS supporting both voice and vpn

    Hi Friends
    i have one 2821 router.Can any one suggesting which ios will support both voice and vpn?

    Questions like this are better/faster answered by checking feature navigator.
    http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
    My suggestion is to run an MD release.
    Also a big dated document:
    http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_tech_note09186a00800fb9d9.shtml
    For old software and hardware you can also check out Figure 1 here:
    http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_bulletin_c25_506007.html
    M.

  • Cisco 300 support TACACS+ authorization and accounting

    Hi All,
    Can someone please confirm that does Cisco 300 switch supports tacacs authorization and accounting ? or just authentication ?
    Kindly guide

    Hello
    Please review this - Cisco 300
    res
    Paul

  • Which application server supports EJB 3 and Java EE 5?

    Hi all,
    I want to develop an application using EJB 3.
    I was planning on using JBOSS 4.0.4 as application server, but I am not sure whether EJB 3 is fully supported.
    Which application server supports EJB 3 and Java EE 5?
    Thanks

    Just install it using the EJB3 profile in the installer. Don't use the "All" profile
    and think EJB3 is included in it :)

  • Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parreral.

    Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parreral.

    hello - I have just moved your post to the Topic forums - you had posted your question in an obscure non-visible promotional community  Hopefully our community users will see your question now.

  • Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parallel

    Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parallel.

    Hi Johnny,
    Per my understanding you can. It is equivalent to running 2 IGP and installing the entry in RIB table based on administrative distance. 
    -Nagendra

  • Which handheld devices support both J2ME and Wi-Fi?

    Which handheld devices support both J2ME and Wi-Fi?

    Hi,
    Got the Lumia CYan update yesterday hoping that it would fix my bluetooth problem. I have Cortana on my Hong Kong country variant but still bluetooth issue is not resolved.
    After pairing instance, the bluetooth does not re-connect on subsequent attempts (it does try to reconnect). On reconnect attempt it fails and presents "tap to pair" under the bluetooth network.
    Please help.
    Daman
    Lumia 1520
    Past: Icon, 928, 720, N9, N97(ugh)

  • Which linux will support oracle 10g1 and 10g2

    which linux will support oracle 10g1 and 10g2

    You can see the Oracle's Certification Matrix here<br>
    <br>
    Nicolas.

  • WAN port inop and PM ethernet port inop - options to connect to AEBS?

    Hi. We had a thunderestorm last week at home and we shut everything down and unplugged the power cords, but I think the cable to the cable modem fried some of my ports. I have a cable modem hooked to the WAN AEBS port and a cable from the LAN AEBS port to the ethernet port of my PM G4 867 (Quicksilver). After lots of troubleshooting with a different cable modem and my PB 15, it seems that the AEBS WAN port is dead and the ethernet port of the cable modem AND PM G4 are toast!!:( I guess all three got fried thru the cable.
    I have a different cable modem that runs my digital phone so I connect thru it's ethernet port (after provisioning it). It works with my PBs directly and my airport express. I went to the Apple store and they confirmed the WAN was inop. Got a new AEBS. Now, here's my question:
    I connect my PBs thru airport, but used the LAN to directly connect to the PM G4. The ethernet port is dead too. What should I do to get the PM connected?
    I think the PM G4 quicksilver can accept an airport card (older kind). I can get one for around $100.
    Is it easy to replace the ethernet card/port on this model? How much?
    What's the best solution? What would you do? Thanks for your help.

    I think the PM G4 quicksilver can accept an airport card (older kind). I can get one for around $100.
    Yes the QuickSilver has an internal slot for the original 802.11b AirPort card. That slot is NOT compatible with the AirPort Extreme card.
    Is it easy to replace the ethernet card/port on this model? How much?
    There is no separate Ethernet card. The Ethernet port is built into the motherboard.
    If you want Ethernet, the least expensive solution is a compatible PCI Ethernet card.

  • 3560E Switches and 10G uplink ports

    Hi!
    Thinking of 3560E switches with 2 X2 10G uplinks, I was wondering if I can use, at the same time, 1 uplink port @ 10G and the other one @ 1G, with the proper CVR-X2-SFP converter and SFP modules.
    Thanks in advance!
    Regards,
    Martin.

    Believe if you use a TwinGig converter in one of the module slots, you can connect one or two gig SFP links to it while the other module slot is 10 gig.

  • Any script to let me find out which Cisco switches have RSA key less than 800 bit?

    Hi,
    Imagine I have 500 Cisco switches (2950, 3750, 4507), IOS 12.3 but some may have different IOS level.
    I know that some of these switches got 'cry key gen rsa' key size = 512.
    I need to have key size = 800 bit.
    We do not have Cisco Works in place. Someone in my organization tells me that I would need all these switches at 800 bit otherwise CiscoWorks can't login to it. Does that make sense? I am not sure if I understand that correctly.
    Question:
    If it is true that CiscoWorks can't access such switches and let me change that setting automatically, do you know any script which I could use to let me run against a list of IP addresses and query the switches to find out where RSA key is 800 bits? If it is not 800 bit, I would like to log a message so that I could go manually to the switch to re-execute 'cry key gen rsa' and do 800 bit instead.

    IOS 12.3 doesn't run on any of these switches.
    LMS can login to switches with an RSA modulus of 512 bits.  It will just use SSHv1 instead of v2.  I do not know of any pre-built scripts to change the modulus size; however, it would be relatively trivial to do with expect.  You could deploy one command to avoid the interactivity:
    crypto key generate rsa gen mod 800

  • Airport express and the ethernet port

    Since January, I've had my older g/b model of airport express set to "join the network," which is an 802.11n airport extreme connected to my cable modem. Until last week, the ethernet port of the airport express could be used to connect in my DVD player or TV. I could do software updates on the DVD player, and watch youtube on the TV, etc. The connection became slow last week, so I decided to reconfigure the airports. Since then, the ethernet connection to the airport express is no longer recognized.
    Please note, although the airport express is not an "n" model, this set-up did work just fine! The DVD or TV was automatically able to display my IP address. The express has a green light, it has no errors in Airport Utility, and AirTunes still works just fine — it's only the ethernet port that has become completely inactive.
    Any thoughts?

    Not sure how you managed to do this with an 802.11g AirPort Express unless you had it configured to extend the wireless range of the 802.11n AirPort Extreme in a WDS. As far as I know, the ProxySTA (wireless Ethernet bridge) capability is only available with the 802.11n Express.

  • Cisco switch 300 configure vlan and ports

    Hi i need help
    i cant see the vlan on port vlan membership
    i did create the vlan and i did configure the port the access
    but when i try to port vlan membership to tell which port to wich vlan i cant see the vlan i have created in the list
    thanks to help

    Hi,
    This forum is focusing on the issues related Windows Server.
    To get better help, please post your question on the forum of cisco.
    Here is the address,
    https://supportforums.cisco.com/
    Best Regards.
    Steven Lee
    TechNet Community Support

  • How to setup Time Capsule to use wifi and 2 ethernet ports

    Hi, I hope someone can help with this issue as I've been searching for an answer without success. Basically, can a Time Capsule (1st gen) connected to a modem create a wireless network, as well as connect to an ethernet powerline adapter, as well as connect to an iMac by ethernet?
    My original setup was as follows:
    modem > time capsule (which creates a wireless network) > iMac
    I bought an AirPort Express to use in another room. It was extending the TC wifi network, but the speeds weren't great so I've got a pair of powerline ethernet adapters. I wanted to add those into my current setup so that the Express can create a wireless network.
    Anyway, before I can get to that stage, I'm having issues with the TC. I want to achieve the setup as follows:
    modem > time capsule (which creates a wireless network) > powerline adapter 1 * > powerline adapter 2 > airport express
    * But as well as connecting an ethernet cable to powerline adapter 1, also connect one from TC to my iMac.
    When I tried connecting an ethernet cable to the TC in my original setup, the iMac lost connection to the internet. I've managed to get the following setup to work:
    modem > time capsule (which creates a wireless network) > powerline adapter 1 > powerline adapter 2 > imac
    But to achieve the setup I want, would require me to buy another powerline adapter (for the Express), and it seems silly to have to use a powerline adapter for my iMac when it is right next to the TC.
    Any help would be appreciated.

    modem > time capsule (which creates a wireless network) > powerline adapter 1 * > powerline adapter 2 > airport express
    * But as well as connecting an ethernet cable to powerline adapter 1, also connect one from TC to my iMac.
    When I tried connecting an ethernet cable to the TC in my original setup, the iMac lost connection to the internet. I've managed to get the following setup to work:
    What you are attempting should work fine. The TC should be able to manage multiple ethernet connections as well as the wireless.
    Investigate what is happening when you plug ethernet into the TC from the imac.
    Please try it.. turn off wireless in the imac to ensure ethernet is the only connection.
    But I would recommend you shut off the whole network at that point. Restart everything in order.. modem .. TC.. EOPs.. Express.. clients.. with 2min gap between them.
    Now look at the imac and check the network preferences.. did it pick up the correct IP from the TC? It should have router (gateway) and DNS all correct using dhcp.. if not check the connectivity light on the TC.. does it come on when you plug in the ethernet cord?
    Open a terminal on the mac and ping the TC address. does it respond?
    Give a few screen shots of how the TC is setup.. bridge, router and what IP it is running. Even just the summary page.

Maybe you are looking for

  • How to use a file transport proxy service as trigger for a webservice

    Hi, I've implemented a alsb file transport proxy service. This proxy is watching a common directory and detects new files. After detection, the proxy move them in an archive folder. After that I want call an external webservice with the filename as i

  • How to change merge to update

    in this statement change merge to update plz help me MERGE INTO CORM_QWD_QUOTE_WUTASK A USING (SELECT * FROM CORM_QMD_QUOTEMAT) B ON ( ( A.QWD_ORDER_OU = B.QMD_ORDER_OU AND A.QWD_ORDER_NO = B.QMD_ORDER_NO AND A.QWD_AMEND_NO = B.QMD_AMEND_NO AND A.QWD

  • Automatic Cancellation Date in Sales Order

    Is there a setting such that when the Cancellation Date in a Sales Order occurs that the Sales Order is cancelled automatically

  • BAM - using with Request Response Send Port

    Hi, I have a scenario where a message is received on a receive port, sent to a solicit-response send port, and then the response is sent out on another send port.  All ports have failed message routing enabled, so that any errors are sent out to an e

  • HT1689 findmyiphone

    I just downloaded the Findmyiphone app.  I have icloud5 enabled and have both my iphone and ipod touch set up.  I am unable to find either of my devices.  Help, please?