Which class type of 4GB T-Flash (microSDHC) does 5...

Hi all,
Seems that there is no mention in the manual regarding to the captioned. I wonder if class 4 or class 6 - 4GB T-Flash (microSDHC)will 5610XM support?
Please give a hand~~ many thanks!
Quoted from - http://www.sandisk.com/Assets/File/pdf/retail/SDHC1.pdf
What is Class Speed Rating?
The SD Association has created and defined 3 speed classes to help you identify speed and performance capabilities/minimum requirements of SD/SDHC, miniSD/miniSDHC, and microSD/microSDHC cards and the host products.
The SD Speed Class Ratings specify a minimum sustained write speed for SDHC/miniSDHC/microSDHC cards (Class 2: 2 MB/s; Class 4: 4 MB/s; Class 6: 6 MB/s*).

Sandisk SDHC cards will work with the 5610. It is unknown if cards larger than 4GB will work, as no one has mentioned it yet.
Here are the specs for the sandisk card:
http://www.sandisk.com/Products/Item(2369)-SDSDQ-4096-SanDisk_microSDHC_4GB.aspx
.Message Edited by psychomania on 27-Nov-200703:22 PM

Similar Messages

WHICH CLASS type of 4GB microSDHC does 5610XM supp...

1. Any microSD(T-Flash)more than 2GB is known as "microSDHC".
2. A 4GB microSDHC has three(3)class types, which are Class 2, Class 4 and Class 6.
3. 5610XM can support microSDHC upto 4GB.
Seems that there is no mention in the manual regarding to the captioned. I wonder if class 4 or class 6 - 4GB T-Flash (microSDHC)will 5610XM support?
My question is "WHICH CLASS type of 4GB microSDHC does 5610XM support?"
Please give a hand~~ many thanks!
Quoted from -
http://www.sandisk.com/Assets/File/pdf/retail/SDHC1.pdf
What is Class Speed Rating?
The SD Association has created and defined 3 speed classes to help you identify speed and performance capabilities/minimum requirements of SD/SDHC, miniSD/miniSDHC, and microSD/microSDHC cards and the host products.
The SD Speed Class Ratings specify a minimum sustained write speed for SDHC/miniSDHC/microSDHC cards (Class 2: 2 MB/s; Class 4: 4 MB/s; Class 6: 6 MB/s*).

Sandisk SDHC cards will work with the 5610. It is unknown if cards larger than 4GB will work, as no one has mentioned it yet.
Here are the specs for the sandisk card:
http://www.sandisk.com/Products/Item(2369)-SDSDQ-4096-SanDisk_microSDHC_4GB.aspx
.Message Edited by psychomania on 27-Nov-200703:22 PM

DMS BAPI_DOCUMENT_CREATE2 Class type Technical Document Category, object ty

Hello Experts!
The problem is that DMS import functionality stoped working after supp. pack implementation.
The process is based on BAPI_DOCUMENT_CREATE2 functionality.
The first problem was an error "The status set requires a previous status" which was causes dy note 1157678
(http://wiki.sdn.sap.com/wiki/display/PLM/Error-Thestatussetrequiresapreviousstatus)
After setting break point/de-implementing that note additional error appeared:
"Class type Technical Document Category, object ty"
Does anyone have idea what caused the problem, or which sap note did that? before SP19 implementation that error was not displayed.
Current highest support package is SAPKH60403.
Thanks in advance for help,
Rgds,
LB

Hi,
That error refers to updating characteristics for classification (addnl data tab in DIR).
Does anyone know what could cause the problem after support pack implementation?
Is it possible that bapi_document_create2 > api_document_maintain2 disables an option to update classification?

Multiple class types for material master classification display default.

Hello,
We are running on R/3 4.7. We use several different class types for our material masters (001 and Z01). The problem this creates is the end user having to constantly tell the system which class type to use when going to the classification screen for different materials with different class types. If a user views one material's classification page with a particular class type (001) then looks at another material with a different class type (Z01) the system tries to pull in information from the last materials class type (001). The system tells the user there are no assignments for the class (001) in the material their viewing but there is one for class type (Z01). The user then has to select the class type that applies to the material master their trying to view. Is there a way for the system to automatically see when a material has only one class type assigned to it for it to automatically default it in without the user having to specify the class type?
Thanks,
JRW

Hi,
Check the configuration, have you maintained default class type for material type.
Logistic General> Material Master> Basic Setting> Material Type> Define attributes of Material Types>Select the material type> Double click on material type--> Class type
Edited by: P. Dhamane on Jun 4, 2010 3:21 PM

From which table I can find the "Class type" and "Class" of the material?

From which table I can find the "Class type" and "Class" of the material?
Thanks in advance for the answers....

Hi,
try following table
KSSK     Material number to class
KLAS     Class description
KSML     Characteristic name
CABN/CABNT     Characteristic name description
CAWN/CAWNT     Characteristic name
[http://www.sap-img.com/materials/classification-view-of-material-master.htm]
[http://wiki.sdn.sap.com/wiki/display/ERPLO/FrequentlyUsedTables]
Regards
kailas Ugale

790fx-gd70 Memory - which brand / type is most compatible?

I have just recently built my first PC using the MSI790fx-gd70 (thanks to some helpful advice from Svet, Bas, and Miles). I encountered a problem early on pertaining to the memory. I had originally purchased 1.65 volt ram and this board only supports 1.5 volts (thank you Newegg for your lack of tech specs). And in doing some reading, it seems that this board only supports up to 1333 speeds without overclocking. I plan to OC down the line, however i am really only interested in utilizing my PC on default settings for the time being. A friend of mine has loaned me a 2GB stick of 1333 Wintec ram. Of course i plan to return this to him shortly, after i have purchased my own memory.
My question is, which brand/type of memory is most compatible with this board? I have looked through the test sheet for this board and it seems as though Kingston, G Skill, OCZ, and a few others have been successful, however i am wondering what the people think. If any of you folks have this board, could you give me a little insight on your preferences for dual channel, 1333 (since that is as high a speed i can get without OCing) ram sticks? I would prefer to purchase 2, 4GB sticks of 1333. any thoughts?
Thanks all

Yeah some Cruical Ballistix would be awesome.
Anything Crucial, Kingston, or Corsair you really can't go wrong with. I have used Kingston and Corsair on my 790FX before I got rid of it. They both worked fine.
BTW if you are looking for Corsair XMS:
http://www.microcenter.com/single_product_results.phtml?product_id=0347304 these are really good. And if you live near a Microcenter you don't have to deal with that shipping back and forth if something is wrong.

Creating a new "Class type" in release procedure.

Hi guys,
how can I create a new <b>"Class type"</b> in release procedure?

Hi,
But I do not know why anyone would create a new batch type for release strategies, it is totally unnecessary and provides no additional options. The class type indicates which objects can be classified and there is already one for release strategies.
You can create a new class or add characteristics to the existing class used in the release strategy anyway.
Ther is also NO WAY that two classes can be used in the release strategy and this new class type would not change this either???
Steve B

Creating a new class type in the classification system

We are wanting to classify objects in a ZTABLE. We have a home grown system for defining our customer requirements that is used as the way for the sales people to communicate to the engineering dept. what the customer wants. A new need has come up that seems to be a good fit to be able to classify our customer requirements. I have been trying to create a new class type that is linked to our ZTABLE. However, even though it looks like we should be able to do this I have not been able to do it. I ran across some documentation that seems to imply that adding a new class type used to be possible, but no longer is.
Can anyone verify that creating a new class type is still possible to do? We are on ECC 5.0.

Can someone point me in the right direction as to how to create my own Class Type. Is there some documentation as to how to dow this? Other than what is fould in SPRO I have tried and tried but no joy for me.
This is what I have done so far:
in SPRO:
1) Created an Object Key for my table ZLO_CUSTREQ. This table has a primary key of CRQNR (custormer requirements number which is I created) The documentation says that I need to add this key field to structure RMCLY (I did that). BUT, it also says the RMCLY is embeded in structure RMCLX and it is not. Do I need to modify RMCLX to add RMCLY as an append structure?
2) Went to Maintain Object types and Class types and selected my table. Double clicked on Class Types in the Dialog Structure tree, which displayed an empty list of class types.
I then Clicked New Entries button and filled in the fields: Class type(Z10), Description(Customer Requirements), Table(ZLO_CUSTREQ). in the Screens group I selected Keywords and Characteristics. In the Functions group I selected: Standard class type and Multiple classifications. I then Clicked the back arrow. This returned me to the Class Types list which now displayed my new class type.
When I click the save button it kicks me out the the SPRO menu screen and I get the warning message "Class type Z10 does not have the classification status incomplete system" .
Then, it won't let me re-enter the Maintain Object types and Class Types screen due to an error "View cluster is already open, go back with F3"
When I hit F3 I am returned to the main SPRO screen. After navigating back to the Maintain Object types and Class types I continue to get the View cluster already open error. The only way I can get back to Maintain Object types and Class types is to completely exit SPRO and start over. When I do, class type Z10 is gone.
I have repeated this procedure several times with always the same results.
Can anyone please help me?

How to get ATINN value based on material number and Class Type ?

I have below SELECT stmt code which gives the correct value of atwrt based on materil no and ATINN.
However in quality system, it is failing because in quality system "atinn" value is not 0000000381. It is different.
So how can I get ATINN(Internal characteristic) value based on material number and Class Type?
-Obtain the batch characterstic value for the Material******************
SELECT atwrt
    UP TO 1 ROWS
    INTO v_charvalue
    FROM ausp
   WHERE objek = mcha-matnr
     AND atinn = '0000000381'   " 'US80_FRENCH_ON_LABEL'
     AND klart = '001'.
THANKS N ADVANCE.

Hi SAm,
use the Below function module to get the Atinn for Atwrt for thr Class and MAterial combination..
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
      EXPORTING
        classtype          = '023'       "Class type
        object             = w_object "Material number with Leading zeros
        no_value_descript = 'X'      "Default X
        objecttable        = 'MCH1'    "Table name Mara or MCH1 or MARC
      TABLES
        t_class            = t_class   "It return the Batch class available for the above combination
        t_objectdata       = t_char "Return Batch characteristics(ATWRT) and their value ATINN in this table
      EXCEPTIONS
        no_classification = 1
        no_classtypes      = 2
        invalid_class_type = 3
        OTHERS             = 4.
Regards,
Prabhudas

Tables in which class and Characters are stored

Hi all,
Can any one tell me in which tables class and Characters are stored
With Rgds
vinod

Characteristics :
CABN Characteristics ( o.a. batch/vendor)
CABNT Characteristics description
CAWN Characteristics ( o.a. material)
CAWNT Characteristics description
AUSP Characteristic Values
Class types and objects :TCLAO Several class types for object
TCLA Class types ( vb. lfa1 => v10 en 010)
TCLAT Class type text
TCLT Classifiable objects
TCLC Classification status
regards,
indranil

IN MATERIAL MASTER RECORD WHAT IS THE USE OF CLASS TYPE(CLASSIFICATION VIEW

Hi Guys,
Can you please explain what are the different critiria to use different class type and what exactly meaning of the each class type with respect to Material classification.
Any material available on this to study. Please give link.
Thanks,
Dhanu

Hi,
Purpose
The classification system allows you to use characteristics to describe all types of objects, and to group similar objects in classes u2013 to classify objects, in other words, so that you can find them more easily later.
You then use the classes to help you to find objects more easily, using the characteristics defined in them as search criteria. This ensures that you can find objects with similar or identical characteristics as quickly as possible.
Integration
The classification system allows you to classify all types of object. First, you must define certain settings in Customizing for the classification system. For more information, see Customizing for the Classification System.
SAP has predefined a number of object types (for example, materials, and equipment). The settings for these object types have already been defined in Customizing, so you can start to set up your classification system for these object types without defining further settings.
Features
Before you can use classification functions, you need to set up your classification system.
The there are three steps to setting up a classification system:
Defining the Properties of Objects
You use characteristics to describe the properties of objects. You create characteristics centrally in the SAP R/3 System.
See the SAP Library, Characteristics (CA-CL-CHR).
Creating Classes
You need classes to classify objects. These classes must be set up. During set up you must assign characteristics to the classes.
Assigning Objects
Once you have created the classes you require for classification, you can assign objects to these classes. You use the characteristics of the class to describe the objects you classify.
This completes the data you require to use your classification system. You can then use your classification system to find objects that match the criteria you require.
Once you have set up the classification system you can use it to find certain objects. To do this:
Find a class in which objects are classified
Find the object(s) you require in the class
When you use classification to find objects, you use the characteristics as search criteria, and the system compares the values you enter with the values of the classified objects.
Uts
Award if helpfull

What are the main differences between 3 three important class types

PP members
What are the main differences between class type 300(variants) , class type 200 (configurable objects) & 001 ( material class)
Please elucidate on the above
Thanks
Suren R

Hi,
The class type is a central concept in the classification system. The class type determines how classes are processed, and how objects can be classified and retrieved in these classes. In Customizing for Classification, you define the settings for a class type. You define class types for a specific object type, such as materials. You can then use classes of this class type to classify objects of this object type.
When you first create a class, you must enter a class type for the class. Each class type is a closed system. There is no link between the different class types.
he class type determines the following:
Which object types you can assign to a class
Which class maintenance functions you can process
Whether you can classify objects in more than one class
Which class statuses, organizational areas, and text types are supported in class maintenance functions
Whether you can use engineering change management for classification
Which filter functions you can use to restrict the search result
All materials can be classified with class type 001. Class type 300 is for variant configuration the variants under a class item are called as variants and can be picked during sales order creation. Class type 200 is for classes that are used as class items in bills of material. You can classify the same materials separately in these class types.
This is basically used to differentiate the BOM class items.
Prakash

BAPI_OBJCL_GET_KEY_OF_OBJECT - Class type 001 requires additional objects

ABAP'ers
I am trying to use BAPI's to complete class assignments (mimicking CL20N).
I am using BAPI_OBJCL_GET_KEY_OF_OBJECT to get the internal object key that is needed for BAPI_OBJCL_CHANGE_KEY, which I am using to complete the classification.
When I execute BAPI_OBJCL_GET_KEY_OF_OBJECT for class type 002 I get the internal key needed for the second BAPI.
When I execute the same BAPI for class type 001 I get the following error:
"CL669 - Class type 001 requires additional objects"
I have seen other posts on the forums on how to do this for class type 023, but I need to complete this for class type 001.
What are the additional objects needed?
Can I use this feature if a material HAS NOT been extended to a plant or storage location?
I have looked in table INOB and there are no entys for this class type - is this normal? Is there something that I am missing?
I have already tried internal and external values, concatenating with the client number and plant number but still get the same error.

Hey Chris,
You cannot use the BAPI for class type 001, This BAPI can only be used with class types which have multiple objects enabled.
For changing the characteristics of material try using BAPI_OBJCL_CHANGE.
Here the key of the object will be your material number

Trouble shooting- MIME type "application/x-shockwave-flash"

I am experincing a problem with watching youtube videos. This problem is exactly like Subtitlemewrong's problem which stated...
"I received only the December '07 update of Quicktime (7.4) and Security Update (2007-009 1.1). That's it. And then my life went to shambles and flash content no longer displays on the web!"...
"A website with flash content won't load, instead I get a block icon with a question mark and a message saying, "The page "Page Title X" has content of MIME type "application/x-shockwave-flash". Because you don't have a plug-in installed for this MIME type, the content can't be displayed." Sometimes I get directed to the Adobe site for Flash, which I'll download. But that doesn't do anything either."
I tried the solution that was given by Klaus1 and it didn't work. I uninstalled using http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2
Then I tried to install using http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash. I clicked on powerpc -based mac and started to install and recieved taht same message that I didn't have the plug-in installed this MIME type.
Thanks for you help.

Yeah, I already tried it under a different account. Unfortunately the new account had the same problem. I appreciate the suggestion. My only logical guess is that the new update to quicktime doesn't mix with 10.3 Panther. I am planning on upgrading to Leopard next week after I get my paycheck. Who knows, maybe those guys will know how to fix it, but so far...no luck. Thanks.

Class type in release procedure

Dear gurus,
pls explain class type significance in release procedure?

Purpose
The class type is a central concept in the classification system. The class type determines how classes are processed, and how objects can be classified and retrieved in these classes. In Customizing for Classification, you define the settings for a class type. You define class types for a specific object type, such as materials. You can then use classes of this class type to classify objects of this object type.
When you first create a class, you must enter a class type for the class. Each class type is a closed system. There is no link between the different class types.
Features
The class type determines the following:
Which object types you can assign to a class
Which class maintenance functions you can process
Whether you can classify objects in more than one class
Which class statuses, organizational areas, and text types are supported in class maintenance functions
Whether you can use engineering change management for classification
Which filter functions you can use to restrict the search result
Class types 001, 300, and 200 are defined for materials. In Customizing for Classification, you define the settings for a class type.
All materials can be classified with class type 001. Class type 300 is for variant configuration. Class type 200 is for classes that are used as class items in bills of material. You can classify the same materials separately in these class types.
You can use class type 012 to classify characteristics. This class type is defined only has the Keywords, Characteristics, and Texts screens in class maintenance functions. You can only classify characteristics in characteristics maintenance functions you cannot use the assignment functions in the classification menu. In this case the indicator Classify master record only was set. No organizational areas were maintained for the characteristics. For this reason, if you create a class of class type 012, you cannot select any organizational areas.
hope it gives you some information.
Regards
Seema

Which class type of 4GB T-Flash (microSDHC) does 5...

Similar Messages

Maybe you are looking for