Which client for BI in NW2004 ?

Hello,
after upgrading a ERP to 2004 there is the question to integrate the BW system in a client of the ERP.
I heard about recommandations to use a different client and not the ERP client for BI functions. (We did not activated the BI client via customizing)
What are the reasons for not using the ERP client for BI or is there no restriction and I can drive ERP functions (in this case EC-CS) and BI functions together in a client ?
Kind regards, Hinrich Benitt

Hi Wai-Hon,
In general, we recommend to keep the SAP BI system on a separate box, due resource consumption, etc.
There is technically no restriction to run the SAP BI system also on the same box, yet it has to be in a dedicated (separated) client. This is necessary for the loading mechanisms (logical system) and for some client-dependant tables used by the SAP BI system.
Cheers
SAP NetWeaver BI Organisation

Similar Messages

Which clients for certain functionalities

Hi all,
I'm configuring SAP ERP 6.0 SR2 after installing. I use 2 physical servers, one for DEV+QAS, one for PRD.
My 2 SAP systems contain ABAP+Java with all software units installed.
In my DEV+QAS system, I don't know whether or not I should use client 001. As DEV role, it should have 1 client for GOLD, 1 for Sandbox, 1 for Unit-Test; and as QAS role, it should have 1 client for Integration-Test.
- Should I use client 001 as any client above or I use client 000 as source client of copying?
- Because client 001 is the client for J2EE portal, should I use it as portal or change the portal client to another client? I don't know how to make another client as a QAS portal client (I'm not sure it's right or wrong, may be wrong). Or we're ONLY able to use 1 client for J2EE portal? If yes (1 portal client only), do I have to configure portal manually in the PRD system's portal also without any transport?
- If possible, someone please let me know your current System Landscape with Transport for reference.
Thanks,
Toan Do

Toan,
Use 000 as the default client when setting up the first new client in the DEV system. Subsequent new clients can and should be created from the new customizing client you create by copying 000.
You will want at least one master customizing client (which you call 'gold') and one integration test client in QAS. On whether you need to create the remaining clients that you mentions depends on your organization (for larger organizations your answer is probably a yes).
Hope that helps.
J. Haynes
Denver

Connect Solution Manager to which client for SMD

Hi all,
do I have to connect the solution manager to the productive client of the sat. system?
We have systems with more than one productive client. Can we connect the SDM to more than one client? How can we do this?
Thank you
Timm Funke

Hi,
thank you for this quick response!
So it is possible to configure the landscap with client 000.
Then, when all sat. systems are working fine within SMD, I can configure the producitve clients in smsy (the rfc destinations to the producitve clients). then I can access these clients from SMD.
Is this right?
Kinde regards
Timm

Which clients are using my Sun One server for authentication?

We use Sun One ver. 5.2 .
Our LDAP clients use it for authentication.
How can I list which clients recently used the Sun One server to authenticate?
The reason I need that is because I want to upgrade the Sun One server and I want to notify the clients that I'm about to do it.
Thanks.

https://www.redhat.com/archives/fedora-directory-users/2005-September/msg00010.html
Useful script to extract LDAP based user posixGroup memberships information
===
Assuming you are using posixGroup objectclass and memberUid attribute to
store your membership information, you may find my shell script useful
and handy.
It works on Solaris LDAP Client with "ldapaddent" and "ldaplist"
commands, and works against FDS, SUN DS or OpenLDAP.
===
Gary

Which client should be use 000 or 001 for Client Copy

Hi,
Which client we can use 000 or 001 for fresh Client Copy.
Also what is the diff. b/w 000 and 001 client and its uses...
Please suggest.

Hi
Always use client 000, except for solution manager systems.
Best regards
550894 - CC-ADMIN: Setting up a new client
Always use client 000 as a template, and never client 001. (A known exception is the SAP Solution Manager.)
Do not copy any application data from client 000 because the consistency of data and the number ranges cannot be guaranteed.
Only client 000 is populated with upgrades, Legal Change Packages, Support Packages, language imports and so on with new Customizing so that it always contains the current sample Customizing. This is why it is also so important that the copy is only carried out after the system is updated. Client 001, on the other hand, is obsolete. It serves only as a sample client and may be deleted at any time.

Detect orphaned sessions for which client is terminated

Hi,
We have REST service. Client will establish session to service. There is max num of sessions limit (10). If I kill client app 10 times, 11th time I will not be able to establish connection to service as max sessions reached. This is because previous sessions
are still active and will be active for session time out period.
Now how to know such kind of sessions for which client app is killed. Is there any setting in IIS for this?
Any inputs on this will be helpful.
Thanks.
Regards,
Harish
Harish

Hi,
For this situation, you could try to disable session state in IIS:
Open IIS Manager and navigate to the level you want to manage. For information about opening IIS Manager, see
Open IIS Manager (IIS 7). For information about navigating to locations in the UI, see
Navigation in IIS Manager (IIS 7).
In Features View, double-click ASP.
On the ASP page, under Services, expand
Session Properties.
Select False from the Enable Session State drop-down list.
In the Actions pane, click Apply.
Besides, for more information, you could refer to:
https://msdn.microsoft.com/en-us/library/ee377050(v=bts.70).aspx
http://blogs.msdn.com/b/david.wang/archive/2006/04/12/howto-maximize-the-number-of-concurrent-connections-to-iis6.aspx
And for more detailed information about IIS, it's recommended that you could ask the IIS issues in IIS Forum:
http://forums.iis.net/
Regards

Cisco Jabber Client for Linux

Are there any plans to have a Cisco Jabber client on linux?

Mike,
The larger body of use case and development for Jabber has centered on Windows and mobile iOS and Android devices. That's not to say that there isn't a contingency of customers that want a Linux client but, as of today, there is no "Jabber" client for that platform. However, I've heard this question asked in a few different forums and the answer thus far has typically been one or both of the following:
1) There is a Jabber SDK, which could potentially be used to custom develop an application.
2) Use 3rd-party XMPP client (e.g. Pidgin)
As for an official answer on "will there be in the future" with a yes/no/maybe and/or a possible timeframe, you would need to reach out to Cisco or your trusted partner as roadmap items cannot be discussed without having a non-disclosure agreement in place. That's what Jamie is getting at in his response.
D. Hailey
NetCraftsmen, LLC.

Is there really a Cisco VPN client for Linux? _Really?_

Hello folks,
        I've finally after almost experiencing a brain aneurysm by trying to think too hard got my Cisco 881-SEC-K9 router properly configured for a multipoint IPSec VPN tunnel to my Amazon Virtual Private Cloud, so that hurdle is finally passed and I actually feel it was a very important milestone in my life somehow. I never thought I'd see the day I actually got my hands on a legitimate Cisco non-stink... erm.. I mean, non-linksys router. Now I just can't seem to find a 'client' VPN program for Linux. I'm currently running a Xen Hypervisor environment on openSUSE Linux because it's the only Linux distribution that completes all of my strenous requirements in a Linux server environment. It's also the most mature, and secure Linux on this planet, making it the most appreciable Linux distribution for my research needs. Using NetworkManager is not really an option for a basic Linux server environment, and OpenVPN is just too confusing to comprehend for my tiny little head. I've heard mention of some mysterious "Easy VPN" but after hours of digging online can't find any information about it, even the Cisco download link leads to a Page Not Found error. I do see a Linux VPN API for the AnyConnect program, but is that an actual VPN client, or just an API? It seems to want my money to download it but I don't have any money nor do I really know what it is because it's all secretive-like, closed source, and I can't even find a simple README file on it explaining what it is exactly. I'm just an out-of-work software developer trying to connect to my home router for personal use and I can't really afford to fork over a million and a half dollars for a single program that I'm only going to need to download once in my lifetime that should have been included with the router in the first place. I more than likely won't even be able to figure out how to use the program anyways because I don't know anything about VPN connections which is why I bought this router so I can try to figure it all out as part of the not-for-profit open source, volunteer research I'm presently trying to conduct. Is there some kind of evaluation or trial period for personal use? That would be really nice so I could at least figure out if I'm going to be able to figure it out or not. I hate throwing money away when it's in such short supply these days. There's really no alternative to a Cisco router. It's an absolute necessity for the things I'm trying to accomplish, so trying to settle for something else and going on with my life is not really an option. No, this is something I just need to face head on and get it over with.
<Rant>
       Maybe I have a little too much crazy in me for my own good, but I don't see why it should take so much money just to learn how to do something for personal reference, it's not really a skill I would ever use otherwise. Wouldn't it be great if Cisco made their VPN client open source and free to the public to use and modify, to improve on, to learn and to grow and bring the whole world closer together as a community? Even the source code to the old discontinued Cisco VPN client could be used as a valuable learning tool for some poor starving college student or Open Source Software developer somewhere trying to get by on Ramen Noodles and Ramen Noodle Sauce on Toast (don't tell me you never thought about it). Through the ripple effect, It would drastically improve sales over the course of time, because it would open the door to a whole new market where those who previously could not afford to participate now could. That's the true power of Open Source. It creates a more skilled work force for the future by openly contributing and sharing knowledge together. What if the next big internet technology and the solution to world tyranny - the solution to end all wars forever - were locked in the mind of an unemployed software developer who couldn't afford to upgrade their cisco router software or access the software they needed because it was closed source and required committing to an expensive service contract to download? That would be just terrible, wouldn't it? I guess there's no way to ever know for sure. I suppose I'd be just as happy if some kind soul out there could point me to an easy to use alternative to an always on VPN connection that runs in the background which doesn't require NetworkManager or having to spend days upon days digging through and trying to comprehend either some really poor or extremely complex documentation? I apologize for all the run on sentences posed as questions, but I've just got some serious mental burnout from all of this, being unemployed is some hard work folks. I could really use a vacation. Perhaps a camping trip to the coast is in order after I get this working, that sounds nice, doesn't it? Nothing like a good summer thunder storm on the ocean beach - far away from technology - to refresh the mind.
</Rant>

I do tend to talk too much and I don't mince any words either. What I am however, is really appreciative for the help. I know you hear that all the time, but you have no idea how much time and headache you just saved me. I think vpnc might be just what I've been looking for, unless someone can think of a client for Linux that I might be able to throw a little further. I'm very security minded now, after the backlash of Blackhat 2013, there's no telling which direction the internet might head next. Oh, you didn't hear? Well wether they realize it or not, DARPA basically declared war with other government agencies by releasing their own version of a spy program for civilians to use against the whoever -- possibly even the governmnet itself. They even went so far as to suggest it's private usage to blanket entire cities in information gathering. Civilians are a powerful foe, as they are not bound by the oath of office, any evidence they obtain is admissible in court, wether they know that or not. There's a very important reason for that. It's to prevent another civil war from ever happening, we shed enough blood the first time around less people forgot. It's something that can and will be avoided because our civilization has advanced beyond the need for bloodshed. The courts have to obey the majority rule, no matter what. For the first time in history, cyberwarfare can reach into the physical world to cause serious damage to physical structures like the nuclear facility incident in Iran. There's scarry bills trying to sneak through congress that are changing the landscape of technology forever for the entire world. We're at a pivotal point now where things can happen. It will be interesting to see how it all plays out over the next decade or so. No matter which way you look at it, just be preparerd to sell a whole lot of routers.

Problem in Wfetch client for Update operations

Hi,
I am using the Wfetch client for the 'Update' operation of an RFC Gateway consumption model . But it seems to always give this error : 'HTTP/1.0 400 Bad Request\r\n'
I have passed only those fields that have been exposed in the GW Data model. Is there anything else that needs to be taken care of ?
The read and query operations are executed successfully though.
Thanks,
Shubhada

Hi Shubhada,
Just recheck two things in Wfetch with below details.
1. Check the path. It should be below formate for update operation
Verb : Put
Path: /sap/opu/sdata/sap/<CONSUM_MODEL>/<data_model>Collection(value=' ',scheme_id='<DATA_MODEL>',scheme_agency_id=' ')?sap-client=< >&$format=xml
Above formate you can take from Read operation which you already executed successfully.
2. Check the XML formate on right handside in Wfetch it should be header & body with below details.
Xml Formate:
x-requested-with: XMLHttpRequest\r\n
\r\n
<?xml version="1.0" encoding="utf-8" standalone="yes"?>\r\n
<entry xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices"xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns="http://www.w3.org/2005/Atom">\r\n
      <content type="application/xml">\r\n
        <m:properties>\r\n
   <d:value> </d:value> \r\n
<d:scheme_id> </d:scheme_id> \r\n
<d:scheme_agency_id> </d:scheme_agency_id> \r\n
Just copy from read operation Read operation which you already executed successfully. And update the fields what you required.
</m:properties>\r\n
      </content>\r\n
</entry>\r\n
Hope you this will help above information.
Thanks & Regards,
Mahesh Devershetty

How can I know which clients are connected to my network through express and which are connected through extreme?

I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelão

please disregard this answer.
Message was edited by: Marcelão

Failed to install php-oci8 with instant Client for linux 64

Hello,
I have a 64-bits Linux box with RHEL4, and PHP version has been upgraded from 4.3.9 to 5.1.6. I try to make the connection to remote oracle server.
I download instantclient-basic-linuxppc-10.2.0.2-20060327.zip , and follow the instruction to
install it.
But when i try to install php-oci8*.rpm, no matter which i use:
php-oci8-5.1.6-1.el5.i386.rpm or php-oci8-4.3.9-2.2.el4.i386.rpm
The installation always failed due to dependencies errors with oracle instant client.
I also tried with some other packages like: php-oci8-4.3.9-3.el4.x86_64.rpm
All my tries gave me dependency errors.
sometime like:
error: Failed dependencies:
libclntsh.so.10.1 is needed by php-oci8-5.1.6-1.el5.i386
oracle-instantclient = 10.2.0.3 is needed by
php-oci8-5.1.6-1.el5.i386And I cannt find the right RPM for oracle instant client for linux 64 bits box, and php-oci8 5.1.6 64 bits.
I have been trying on this problem for more than one week, and so frustrated. I will appreciate if I can be guide on this issue.
Thanks in advance!

See my followup to your duplicate post in the PHP forum

Navigation between different componets in IC Web Client for CRM 7.0

Once the user click save button in component ICCMP_BT_BUTTON I need to navigate to component ICCMP_BT_SVO that displays the Service Order Data and display the new Service Request that was created.
How can I do navigation between different componets in IC Web Client for CRM 7.0?
Thanks.
Rodolfo Miã

Hello,
You can find detailed presentations in the learning maps available on the SAP Service Marketplace http://service.sap.com/rkt-crm for release CRM 2006s, CRM 2007, or CRM 7.0. In case I didn't mention it before, Intent-Driven Interaction (IDI) was first introduced and is only available starting with CRM 2006s and above. In the Interaction Center area, there is a presentation called "Rule Based Automation and Guidance" which covers IDI. I'm not sure if you can access the URL directly, but just in case here it is: [https://websmp104.sap-ag.de/~sapidb/011000358700001162852007E].
Warm regards,
John

Want to download only client for Oracle 8.1.7 for linux

Where can one find client for Oracle 8.1.7 for linux which we can download ? Oracle database is on another platform.
Thanks

The Database, Management and Integration server and client are all included in the one 8i download. The installer gives you the choice of just installing the client tools.

Help me in writing client for this JAX ws Web service

Hi ,
I am unable to write client for my Webservice deployed under glass fish v3 .please help.
package jws;
import javax.jws.WebService;
import javax.jws.WebMethod;
import javax.jws.WebParam;
@WebService(name="CalculatorPortType")
public interface Calculator {
    @WebMethod
    public int add(int value1, int value2);
} package jws;
import javax.jws.WebService;
@WebService(serviceName = "Calculator",
            portName="CalculatorPort",
            endpointInterface = "jws.Calculator")
public class CalculatorService implements Calculator {
    public int add(int value1, int value2)
         System.out.println("Inside web service class ");
        return value1 + value2;
My client which is incomplete :please help
import java.net.URL;
import jws.CalculatorService;
import jws.Calculator;
import javax.xml.ws.Service;
import sun.print.resources.serviceui;
public class Hi {
@WebServiceRef(wsdlLocation=
"http://localhost:8089/Ram/Calculator?wsdl")
CalculatorService service ;
public static void main(String argsp[]) throws Exception
} This is deployed under glassfish v3.

When you just use the JAX-WS standard you do not need any WebLogic related classes to create a client for your web service.
When the web service is deployed the WSDL can be accessed. By using this WSDL you can create your client by using tools
such as wsimport (which comes with a JDK distribution and is located in the JDK_HOME/bin directory)
wsimport -keep -d C:\YOUR_PROJECT\src http://hostname:port/context/SomeWebService?wsdlthe 'keep' option make sure the generated .java files are not thrown away.

Client for 11.1.0.7

Hello OTN Community,
I installed Oracle Database 11.1.0.7 on a Windows 2008 Server 64 bit. Now I am looking for the proper client to install it on Windows Vista 64 bit machines. But I cannot find the download for Client version 11.1.0.7 Vista. Any suggestions where I can find the client or which client I should take instead if none exist ?
Ilja

Ikrischer wrote:
I installed Oracle Database 11.1.0.7 on a Windows 2008 Server 64 bit. Now I am looking for the proper client to install it on Windows Vista 64 bit machines. But I cannot find the download for Client version 11.1.0.7 Vista. Any suggestions where I can find the client or which client I should take instead if none exist ?It's a bit confusing. The general ruile with WIndows is that Oracle releases software for "all supported versions of Windows that are available at the time of Oracle s/w release". If Microsoft the releases a version after, Oracle will usually do a custom release for that specific version of Windows and include all patches to that date. But that special release does not apply to previous versions of WIndows. (As always with Oracle, there are exceptions.)
In this case Vista was released after 10.2.0.1 and before 11.1.0.6. There is a special version of 10.2 for Vista, but the Vista release for Oracle products is included in all future 'generic Windows' releases.
So, in your case, for Vista you would take "Oracle Database 11g Release 1 Client (11.1.0.6.0) for Microsoft Windows (x64)" and patch it up to 11.1.0.7 by downloading the patches from your Support account.

Which client for BI in NW2004 ?

Similar Messages

Maybe you are looking for