Which client versions will leopard Xserve support

Which client versions of OSX will leopard Xserve and intel server hardware support?
hal

If the Xserve shipped with Mac OS X 10.4 or earlier, the retail version of Mac OS X 10.5 client will work on it. If the Xserve shipped with Mac OS X 10.5, the system would need to be installed onto an external drive or through FireWire Target Disk mode if possible, and then updated so that the OS version on the drive is newer than the Xserve. If no compatible Mac OS X updater is available, the client version of Mac OS X cannot be used on it.
(26966)

Similar Messages

  • Can I install/run the Client version of Leopard on an XServe?

    Can I run an XServe with the client version of Leopard? I'd like to use the license which ships with the new server on another system.

    Hi
    Yes.
    Tony

  • Which iphone version will work all over the world?

    Hello there.Im from Pakistan.Need some info related to iPhone. Next month i'am going to Canada and planing to buy an iPhone 6 from there.. So im confused which version will work fine here in pakistan.. Kindly guide me about the version which should i buy. I want a version which works all over the world.. Waiting for reply, thankyou!

    An unlocked iPhone should do the trick. You need to get it in an Apple Store. I have traveled around the world with my British unlocked Iphone and I've had no problems switching between sims.
    Good luck! By the way, revise your phone while you are on the shop, you don't want to find any defects when you are back in Pakistan.

  • Which Client Version of OWB can be used for Oracle8i

    Hi All,
    I have installed Oracle 8i in my system. Iam unable to install higher versions due to system configuration issue.
    Which version of OWB client will support Oracle 8i? or Do I need to go for Oracle 9i to connect through OWB 10g client?
    Thanks & Regards,
    Kumar

    Hi Kumar,
    OWB10g R1 requires at least 8.1.7.4 Oracle Database,
    OWB10g R2 - 9.2.x Oracle Database
    Look at these requirements in Installation guide
    [OWB10g R1 Installation guide - Database Requirements|http://download.oracle.com/docs/cd/E10926_01/doc/owb.101/b12150/reqs01.htm#CIHBCDIC]
    [OWB10g R2 Installation guide - Database Requirements|http://download.oracle.com/docs/cd/B31080_01/doc/install.102/b28224/reqs01.htm#BGEEGJAC]
    So your case - OWB10g R1.
    This requirement only for database used as target or as database for design repository.
    Regards,
    Oleg
    PS. Please note that Oracle doesn't support OWB10g R1

  • Which Language version of Indesign CC supports Thai language?

    Greetings,
    I'm trying to troubleshoot floating vowel characters in our selected font (Sukhumvit) in Indesign CC, and can't find which version I should be using to be able to mark my text as thai language. I can of course download any version, but right now am in the English/arabic version.
    The troubleshooting involves what can and can't be done in terms of tracking and kerning, and I'm helping to author guidelines for Thai usage for this font for global use.
    I'm running a Mac Pro (not the cool new one, yet) Mavericks 10.9.1 and using the most recent update for Indesign
    Please help?
    Thanks
    Mo

    I thought that Sukhumvit was a Mac system font, but I was of course completely wrong. Turns out it's an iOS system font, so I couldn't do any testing at all. I assume that you purchased the font directly from Cadson Demak, and I'd take my questions directly to them. It's probably a font build issue.
    If I were using a font where I knew the foundry wouldn't listen to my concerns, I might write a fistful of GREP styles that would remove tracking from the floating vowels. Or I might use Peter Kahrel's kerning table script. It's brilliant.
    But the most important bit is this: I would also write my style guide so that tracking wasn't indiscriminately applied to all writing systems. That strikes me as a no-brainer. Perhaps your default Latin-script font needs some brathing room at body text sizes in the language(s) you read, and the easiest way to get said breathing room in your workflow is to use tracking instead of a different font or careful kerning. but once again I'd rather use the kerning table script than just track everything willy-nilly.
    That being said, It's likely that I'll have to recommend that no tracking or kerning be used with this language. Our creatives won't like that at all, as they like to be able to control every facet.
    If your creatives can't read Thai then they should absolutely have that control taken away from them. I'm a localization wonk, not a "creative" so perhaps I'm judging a bit harshly, but if they want to "control every facet" then they'd best understand exactly how Thai is supposed to look - an understanding best achieved by literacy.

  • Hi, my computer's too old to download 3.6.24 and it says that the older version will stop being supported soon, so how can I continue to use Firefox, I can't afford a new computer? It crashes a lot too, I've been told that's because it's old too.

    It seems to crash after a period of time and then will keep crashing constantly if I keep trying to open up Firefox. It does the same with Safari. It's a mac running on 10.5.8. Is it possible to download and use older versions of Firefox? Help! Please.

    There are some recovery programs out there if you google them - many with free trials. I haven't tried them so I have no opinion.Read any professional tech and user reviews you can find before you try one. I have read here in the past that some have worked for people who have posted here. 
    To help in the future, have you considered using Jump Desktop - Remote Desktop? I know it won't solve the problem you're dealing with now (unless notes were taken on your computer.) It's in the app store. It's the #1 paid app in the business category and the reviews are great. It allows you to see anything that's on your computer on your ipad. If you take your notes on your ipad then you might want to email them to yourself, put them on Word in your computer, for example, and then if you need them in class, you remotely connect your ipad to your computer and you will see your notes. This way you won't have to rely so much on the cloud. The explanation would be too long here, but you might want to take a look at it. You can use the free trial on jumpdesk.com and then if it works for you, buy it in the app store. 
    Meanwhile, it's hours since you sent this post. Hopefully others who can help solve your problem who are on this forum now can help you. I hope you get your notes back. Don't give up too quickly.
    Hope this helps. 

  • Which graphics card will my desktop support ?

    Hello,
    I'm using HP Pro 3090 MT. I want to install a graphics card in my desktop but dont know which is the best card I can install.
    Please help me in identifying a good graphics card.

    Hi,
    You might get better assistance on the HP Enterprise Business Forum.
    This MSI NVIDIA 750 might be a good choice.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Which protocol version is really used?

    In the JSSE reference guide, Appendix A: Standard Names, is said, that the protocol name passed to the getInstance method of the SSLContext class maybe one of the following: SSL, SSLv2, SSLv3, TLS, TLSv1. But it does not specify which protocol version will actually be used, it is always said that it supports one or some specific protocols, but it may support other protocol versions as well.
    And what does the setEnabledProtocols method of the SSLSocket class do? May an application specify here exactly, which protocols should be used?

    JSSE currently supports SSL v3.0 and TLS v1.0 (SSL v3.1).
    The protocol agreeded with the server depends on your client/server configuration, and always is the lower protocol supported by both of them.
    For example:
    Server -> TLS v1.0
    Client -> SSL v3.0
    The shared protocol will be SSL v3.0.
    About the getEnabledProtocols() method, give a look here:
    http://java.sun.com/j2se/1.4/docs/guide/security/jsse/JSSERefGuide.html#NewMethods
    Hope this helps.

  • ASDM - which Java version?

    Unable to launch device manager.
    I'm trying to run ASDM and targeting a mixture of 5505 and 5510s. I'm using Mac (Yosemite) and Windows 7 machines.
    5505 is 6.2, 5510 is 9.x
    Oh whatever.
    Which Java versions will work? 

    Due to security reasons you should always update Java to the latest version. So the question is not which Java to use, but which ASDM works with the newest Java.
    If you always upgrade your ASAs to the latest ASDM, then you should be able to use the ASDM. At least that works for me (OS 10.10.2 and also Win7).

  • Which sql developer version will support oracle 8.1.7

    hi
    which sql developer version will support oracle 8.1.7 or is it necessary to use plsql developer to connect to database (oracle 8.1.7)

    Hi,
    SQL Developer version 1.2.1 is able to connect to 8.1.7 with limited functionality (prepared reports and browser for objects could not work)..
    Next version (tested with 3.2 64-bit) of SQL developer could be "hacked" to connect to 8.1.7 by simply copy file C:\oracle\product\10.2.0\client_1\jdbc\lib\classes12.zip from Oracle client prior 11
    into appropriate jdk\jre\lib\ext folder.

  • How do I get back to FireFox 5. The 7 version will not work with the college's MIS - which does not support version 7, which was downloaded automatically.

    The Angel management system used for classes does not support version 7. That's huge.

    Old versions of firefox 4,5 & 6 are no longer supported or considered secure. You put your system and your personal data at risk if you use them. Further more if you download from third party sites you face other potential risks or inconveniences.
    The recommended official solution is to use Firefox 3.6 which is still supported, and will be 3.6.23, which will upgrade soon to 3.6.24
    Another alternative is to use the current secure firefox for all day to day work, and use a separate firefox portable for the problem school site. With luck a firefox portable version will be available with firefox 3.6.23 which is currently the supported version. http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps

    I am using Iphone 3G and running with ios version 4.2.1 .I am looking for to run whatsup apps.Can you guide me which IOS version should i download wherein,it will support whatsup apps

    with an iphone 3G the most up to date ios is 4.2.1 so you have a problem because whatsapp requires a higher version.  If you saved an earlier version of whatsapp you could install that otherwise you cannot use the app.  You will need to get a more up to date phone

  • Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

    Below issue is with only one client in that untrusted domain. So boundary is not the issue.
    Env -
    mydom.com has SCCM PRI site (MP, DP as well).
    Client is in untrusted forest.
    Please help.
    Thanks
    MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <AssignedSite SiteCode="pri"/>
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Default-First-Site-Name"/>
        <Forest Name="staging.local"/>
        <Domain Name="staging.local"/>
        <IPAddresses>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Received header '<Msg SchemaVersion="1.1">
     <ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
     <SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
     <SourceHost>pri1SCCM02</SourceHost>
     <TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
     <ReplyTo>MP_LocationManager</ReplyTo>
     <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
     <Priority>3</Priority>
     <Timeout>600</Timeout>
     <TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
    Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
    Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
    PM 4816 (0x12D0)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
    SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
    Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
    Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
    Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
    MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
    ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000.  The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    A Fallback Status Point has not been specified.  Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

    Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
    That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
    This line jumps out at me in the log file though: "An MP exists on this machine".
    That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Which XSLT versions are support by Oracle BPEL? v1.1  or v2.0?

    Which XSLT versions are support by Oracle BPEL? v1.1 or v2.0?
    As far as I heard v1.1 is the highest version but some functions of v2.0 are supported as well.
    Is this true?
    If yes: Which XSLT functions of v2.0 are supported?
    Does it matter if I change the
    version="1.1"
    attribute in the topmost
    <xsl:stylesheet......>
    tag?
    Which XSLT processor is built-in/used?
    Peter

    XSL mapper in BPEL supports 1.0 only in-built. And this is true for 11g also. However, we can declare <xsl:stylesheet version = 2.0 ... and use all xpath 2.0 functions. I have used few of them and has been successful so far. Once you declare version as 2.0 the only issue will be that XSL's visual GUI mapper will not work in JDeveloper and you will need to modify the code from the source.

  • General availability of MDM GDS 2.1, which NetWeaver Version is supported?

    Hello Community,
    does anyone know when GDS 2.1 is general available and which Java NetWeaver Stack version will be supported?
    Kind Regards,
    Tobi

    Hi Tobi,
    GDS2.1 might will be GA around December 2010, but this is not official.
    Regards,
    Gabor

Maybe you are looking for