Which codec I should use for exporting to Windows (vanilla instal of Windows (no codecs preinstalled))?

I need info! PLEASE REPLY! I need it tommorow!

If they don't want to install anything, you would have to buy Flip4Mac from Telestream. For SD video, the price is $50, but for HD, it is $180. You would use the QuickTime Export Component settings in Compressor; once Flip4Mac is installed, you will get a WMV option. That is the safest and most simple way.
There are no guarantees but if they install QuickTime Player or VLC, they should be able to play an H.264 mp4.
Alternatively, try burning a DVD or uploading to You Tube for them to play in their browser – or download an FLV file.
Good luck,
Russ

Similar Messages

  • Which protocol we should use for file transfer in ios ?

    which protocol we should use for file transfer in ios ?

    My friend that's definitively a Lotus Domino question, you'll probably ask in the Domino's forums if it generates wsdl, or simple http services you're ready to consume those services in Flex.

  • Which Event Classes i should use for finding good indexs and statistics for queries in SP.

    Dear all,
    I am trying to use pro filer to create a trace,so that it can be used as workload in
    "Database Engine Tuning Advisor" for optimization of one stored procedure.
    Please tel me about the Event classes which i  should use in trace.
    The stored proc contains three insert queries which insert data into a table variable,
    Finally a select query is used on same table variable with one union of the same table variable, to generate a sequence for records based on certain condition of few columns.
    There are three cases where i am using the above structure of the SP, so there are three SPS out of three , i will chose one based on their performance.
    1) There is only one table with three inserts which gets  into a table variable with a final sequence creation block.
    2) There are 15 tables with 45 inserts , which gets into a tabel variable with a final
    sequence creation block.
    3)
    There are 3 tables with 9 inserts , which gets into a table variable with a final
    sequence creation block.
    In all the above case number of record will be around 5 lacks.
    Purpose is optimization of queries in SP
    like which Event Classes i should use for finding good indexs and statistics for queries in SP.
    yours sincerely

    "Database Engine Tuning Advisor" for optimization of one stored procedure.
    Please tel me about the Event classes which i  should use in trace.
    You can use the "Tuning" template to capture the workload to a trace file that can be used by the DETA.  See
    http://technet.microsoft.com/en-us/library/ms190957(v=sql.105).aspx
    If you are capturing the workload of a production server, I suggest you not do that directly from Profiler as that can impact server performance.  Instead, start/stop the Profiler Tuning template against a test server and then script the trace
    definition (File-->Export-->Script Trace Definition).  You can then customize the script (e.g. file name) and run the script against the prod server to capture the workload to the specified file.  Stop and remove the trace after the workload
    is captured with sp_trace_setstatus:
    DECLARE @TraceID int = <trace id returned by the trace create script>
    EXEC sp_trace_setstatus @TraceID, 0; --stop trace
    EXEC sp_trace_setstatus @TraceID, 2; --remove trace definition
    Dan Guzman, SQL Server MVP, http://www.dbdelta.com

  • Which cable should use for Sony DV connect to iMac ?

    Which cable should use for Sony DV(IEEE 1394)connect to iMac ?

    If your iMac has just the FireWire 800 connection, you will need the 9 pin to 4 pin cable.
    http://www.cwol.com/firewire/firewire-800-1394b-cables.htm
    If your iMac has the FireWire 400 connection, you will need the 6 pin to 4 pin cable.
    http://www.radtech.us/Products/ProCableFW400800.aspx
    Links are to illustrate examples. You should be able to pick them up at most computer stores.

  • Which are the best settings for exporting comps before edditing in Premiere Pro

    Hello everyone!
    As the title says, which are the best settings for exporting comps from AE to Pr.Pro and then edit them?
    Let  me explain: I have two comps in AE (intro and outro) and want to export  them in Pr.Pro for edditing along with a fottage i shot.
    When i render them the size of the files are huge (30 sec= 7GB).
    Which  is the best method (and settings) i can export the intro and outro to a 'normal' file  size and then put them in Pr.Pro without loosing any quality??
    [Comp settings: HDTV 1080 29.97 (1920x1080)]
    AE and Premiere Pro both CS4

    If you're rendering and exporting an intermediate video file to go from After Effects to any other piece of post-production software (such as Premiere Pro), you want to make sure that you're not losing any quality.
    Most compression methods, which make movies smaller, also lose some of the image data---i.e., quality. There are a few compression methods that don't lose any image data; these are "lossless" codecs. These lossless codecs do decrease the size of a video file, but they're nowhere near as effective at decreasing size as the lossy codecs are. But file size isn't important when you're doing post-production work. Big files are a fact of life in post-production.
    Examples of lossless codecs include the PNG codec and the Animation codec at the highest quality settings, both of which can be used in a QuickTime (.mov) container. I prefer the PNG codec; it's more efficient for photorealistic images, whereas Animation is more efficient for things like cartoons. There are lots of other lossless and nearly lossless codecs. A lot of people that do video editing like the Lagarith codec, but that is something that you'd have to go and get; it's not part of a standard CS5 or QuickTime installation.
    See these FAQ entries for information about compression and why file sizes are big for losslessly encoded files:
    "FAQ: Why is my output file huge...?"
    "FAQ: What is the best format for rendering and exporting from After Effects?"
    By the way, keep in mind that you don't always need to render and export an intermediate movie to go from After Effects to Premiere Pro. There are other ways to move data back and forth between these applications, including Dynamic Link. Which is best depends on the specific circumstance. See "Working with Premiere Pro and After Effects".

  • How to set up set which NIC card to use for multicast?..

              I just downloaded Rolling Patch 1 for WLS6.0SP2.
              While reading the README file it says
              " ISSUE 42518: Provided a way to set which NIC card to use for multicast traffic
              Can anyone tell me how to set this?. on my WebApplication server it has two NIC
              cards and I want to use the NICcard which is being used to talk to internal network
              for multicast messages.
              One more thing,
              Can anyone one tell how to search for bugs (ISSUES) in weblogic. I am looking
              place where I enter ISSUE number and should get the detailed description of bug/issue
              etc..
              Thanks for helping,
              Nilesh
              

              Thanks Kumar, I'll try this.
              Does this -Dweblogic.interfaceAddress used only for multicast. Or this is also
              used to talk to AdminServer?.
              The other problem I am facing is when I restart the AdminServer in recovery mode
              it's not finding my WebApp servers, because my webapp servers are on public network
              and my admin (management) server is on private network.
              please look at http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=1217&utag=
              , for more details about my problem.
              Thanks,
              Nilesh
              Kumar Allamraju <[email protected]> wrote:
              ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
              ><html>
              >You should be able to do it via console in 6.1
              ><br>Not sure if it was added in 6.0
              ><p>For 6.0 you can set this via command line
              ><br>java -Dweblogic.interfaceAddress=<addr>
              ><p>You need 6.0 SP2 RP1
              ><p>--
              ><br>Kumar
              ><p>Nilesh Shah wrote:
              ><blockquote TYPE=CITE>I just downloaded Rolling Patch 1 for WLS6.0SP2.
              ><br>While reading the README file it says
              ><br>" ISSUE 42518: Provided a way to set which NIC card to use for multicast
              >traffic
              ><br>"..
              ><p>Can anyone tell me how to set this?. on my WebApplication server it
              >has two NIC
              ><br>cards and I want to use the NICcard which is being used to talk to
              >internal network
              ><br>for multicast messages.
              ><p>One more thing,
              ><p>Can anyone one tell how to search for bugs (ISSUES) in weblogic. I
              >am
              >looking
              ><br>place where I enter ISSUE number and should get the detailed description
              >of bug/issue
              ><br>etc..
              ><p>Thanks for helping,
              ><p>Nilesh</blockquote>
              ></html>
              >
              

  • Which  Function Module is used for converting the DATE in BDC

    HI,
    Which  Function Module is used for converting the DATE Format in BDC for Uploading purpose please help me.

    data : date like sy-datum.
    data : odate(10) type c.
    date = sy-datum.        " in format YYYYMMDD
    CALL FUNCTION 'CONVERSION_EXIT_PDATE_OUTPUT'
      EXPORTING
       input         = date
    IMPORTING
       OUTPUT        = odate         .
    write:/ odate.  "in ur format '.
    1.
    In ur itab make a field for date as 10 characters and use this Fm to store the date .
    2. Pass the date as the charcter field to the screen and now check .

  • Which Listener I should use if I drag and Drop an image/icon into a JPanel?

    Dar Friends:
    Happy new year.
    I try to drag and Drop an image/icon into a JPanel, and hope I can immediately detect it after DND,
    Which Listener I should use in this JPanel if I drag and Drop an image/icon into a JPanel??
    Thanks

    Thank camickr .
    I can dnd an image into a JPanel called JPanelOld already, I hope to use another JPanel or JTree to listen to any Dropped Image in JPanelOld later on so I can take some action in another JPanel or JTree.
    so what kind of Listener I should use for my purpose??
    where to add this Listeners??
    Happy New Year.

  • In which situations we should use Character Mode Reports?

    Question: In which situations we should use Character Mode Reports?
    Explaination: I am faced with a certain situation. I feel that I should develop reports in Character Mode. But I am not sure about this.
    I invite all readers to contribute on the subject matter. Once I receive responses, I will explain my specific situation as writing it now may narrow the list of such situations.
    Also I would like to know what problems we face when developing reports in Character Mode. I was developing my first Character Mode report and I faced layering problems. So I would like to know more such precautions.
    TIA
    Tariq

    Hi Muhammad,
    There's any number of cases for using character mode Reports. However, they all typically come down to what your doing with the output of the report.
    Basically, you need character mode reports whenever the Report output needs to be read by some sort of Ascii file reader. This could be notepad, VI, MSVC, dot matrix or fixed character set printers, ...
    A less common case is where you just want to get at the data within the report. You're just using the ascii output as a data dump to pass through to another program/utility. (This is really just a specialised case of the previous one).
    There are some cases where character mode output may be one of several choices. Eg: the body of an email message which could be HTML or plain text.
    Robin.

  • Need to know which collaboration room to use for my requirement

    Hi All,
    I have a very limited idea of KMC. I am in Composite Developement
    I have a reqiurement in which a person A needs to invite some  other persons to discuss an issue and after the discussion with them needs to take a decision. But any of these persons can be offline. So they may not reply in real time but after they log into the portal.  The participants should be able to see the previous discussions which they missed so that they  can get info of what discussions has taken place while he/she was away.
    Please help me as to which collaboration room i should use for this and some guidance also how to set it up .
    Thanks
    Points assured for help.

    Hi Shobhendra
    You can use standard Discussion rooms for ur requirement.
    They are basically used for <b>asynchrnous collaboration</b> purpose in which case users might be offline.
    For details see
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c7/a20741375cf16fe10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/b9/9b0c42e1c25f24e10000000a1550b0/frameset.htm
    (Award points if found useful)

  • Which tool do you use for load testing?

    Which tool do you use for load testing for J2EE application?

    hi,
    i use jmeter for without issues..
    first make sure that the system from where you are doing load testing is in the same lan(without firewall) to that of server. Here you are testing the capacity of server and not the network bandwith.
    So assuming very good network connection what is the servers performance level...
    If u have to decide which tool is decent enough to load testing,
    i would suggest go for jmeter. its reliable and i have used it without problems.
    Here is my quick tutorial for jemeter which i made for my teams reference.
    REFERENCE
         For Getting Started refer to any tutorial for Jmeter
         You can refer to introduction on
              http://jakarta.apache.org/jmeter/usermanual/
    RUNNING LOAD TEST
         Extract jakarta-jmeter-2.3RC4.zip in c:
         install jdk-1_5_0_12-windows-i586-p.exe
         Run C:\jakarta-jmeter-2.3RC4\bin\jmeter.bat
         In Test Plan add Thread Group
         Right Click Thread Group -> Add->Sampler->HTTP Request
         Select HTTP Request added fill details
              Serverip:www.xyz.com
              Port:80
              Path:/xyz-webapp/index.jsp
              Use KeepAlive: Checked
              Retrive All Embeded images from HTML: Checked(For geting images inside html)
         Right Click Thread Group -> Add->Listner->Graph Results
         Click on Thread Group Fill details
              No of Threads:3(This means no of simultaneous users)
              Ramp Up Period:1(3 Request will be made in 1 second period)
              Loop Count:5(Above process should be repeated how many times)
         Save TestPlan
         Run -> Clear All
         Run -> Start
              Click on Graph Results for Output
         Try adding different listener in Thread Group
              Thread Group -> Add->Listner->Summary Report
         Listeners coud be added at thread group level or HTTP Request Level
    RECORDING A TEST.
         Add a HTTP proxy server in workbench by right clicking on it and selecting Add->Non test Element->HTTP Proxy Server.
         In Test Plan Add Thread Group
         In HTTP proxy server select Target Controller as Test Plan > Thread Group.
         Go to Internet Explorer and go to internet settings and set proxy server as localhost and the port
              which is configured in Jmeter proxy server.Save Settings.
         In Jeter proxy server start by Clicking on Start button in the HTTP Proxy Server Flap.
         In browser navigate the application which you want to test.
         The nodes will be added in the Thread Group.
         Once Navigation is done stop the proxy server and save the test plan from file menu.
    LOGGING INTO APPLICATION.
         When we have to login into system and then navigate the system
              we need a cookie to be tracked after login. This could be achieved
              simply by Add -> Config Element -> HTTP Cooie Manager.
         After adding the HTTP Cooie Manager simply run the test.
    LOOPING COUNTER.
         When a request is made multiple parameter is sent to server.
         Parameters are sent from the HTTP Request node added in the Thread Group
              in "Send Parameter with the request" table.
         If we run the loop count 10 times the parameters will be sent same in every request.
         If you have to send parameters like user1,user2,user3,user4....
              then add -> Pre processor -> Counter.
         Put start as 1 and and Maximum as 10 or whatever required.
         Put Referene name as iCtr or whatever.
         In the "Send Parameter with the request" in value column put user${iCtr}

  • Which web server is used for openHAB2?

    I've recently set up IDE for openHAB2 and built it successfully.
    openHAB dashboard & paper UI are web application.
    But I can't find any web server settings in openHAB project.
    Which web server is used for them?
    Is it possible to add java servlet for my custom REST service?

    This is probably rather a question for the openHAB 2 mailing list. But to answer: Jetty is used in openHAB 2 as you can see here https://github.com/openhab/openhab2/blob/master/products/org.openhab.product.runtime/org.openhab.runtime.product.product#L57.
    And yes, you can certainly add custom REST endpoints. You should do this as it is done with the default REST endpoints like https://github.com/eclipse/smarthome/blob/master/bundles/io/org.eclipse.smarthome.io.rest.core/src/main/java/org/eclipse/smarthome/io/rest/core/binding/BindingResource.java.
    Regards,
    Kai

  • I have an iPhone in my name and my wife has an iPad in her name. We have just ordered an iMac and wondered which account we should use to get the best out of all the devices

    I have an iPhone in my name and my wife has an iPad in her name. We have just ordered an iMac and wondered which account we should use to get the best out of all the devices? Can we use both accounts in iCloud?

    Yes you can.  However, it is better to use one person's account most of the time for purchases in the Mac App Store and iTunes since you can share purchases, such as songs, among various devices using the SAME account.  You Cannot share purchases among different accounts, though.   So make one of your accounts the main "purchasing" account so you can share purchases.
    Hope this helps

  • In Adobe Acrobat 9 which I have been using for a long time (Widows 7) says, You cannot use this prod

    In Adobe Acrobat 9 (Wndows 7) which I have been using for a long time now it says I cannot use it withoutv repairing.  It instructs me to uninstall & reinstall...

    I have not run into this yet with my AA9 and Win7, but have been seeing posts about it. I would try a repair before I would do an uninstall and reinstall. You might also turn off javascript for a bit in case there has been some javascript that has caused problems (ok, making wild guesses). If you do decide to uninstall, be sure to deactivate first, uninstall, run http://labs.adobe.com/downloads/acrobatcleaner.html, and remove any left over parts of the Acrobat folder. Then proceed to the reinstall and updates.
    There is a question about whether being able to use it is correct, or you are just getting some message that is a spam that somehow got into your system (again, a possible javascript issue). Besides turning off javascript, you could also try isolating the javascripts to moving them to a temporary directory and seeing if one is causing the problem.

  • Be grateful for your help with Photoshop Elements which I have been using for several years.

    Be grateful for your help with Photoshop Elements which I have been using for several years.  Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements.  On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’.  1. Is there a relationship between Elements and My Pictures and is Elements dependant on    the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more?  Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one?  Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop.  I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue.  I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music.  Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

    The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

Maybe you are looking for

  • Accounting Documents - Assignment feild  error

    Hi All,   I am creating a   contract, line item of contract having an item category relevant for time based revenue recognition. 1) When I am billing the contract, the accounting document assignment field (line items) is populated with the contract n

  • How to setup AT&T U-Verse Pace 5031NV Gateway router for Remote Web Access?

    The Pace 5031NV Gateway router is not UPnP able. logged into the router http://192.168.1.254/xslt?PAGE=C_3_1b_POST&NEXTPAGE=C_3_1b_POST I defined "Firewall Application Profile Definition "Windows Server 2012 RWA"   I did NOT select an Application Typ

  • Diagnostics Agent 7.11 on iSeries

    I"ve gone and got the installation master DVD and the Kernel DVD but cannot find the standalone Diagnostics Agent. Following You can download Diagnostics Agent installation DVDs from SAP Service Marketplace at: http://service.sap.com/swdc Download SA

  • Maximum number of items in FI reached - CJ88

    Hi; recnetly i came accross an issue, while executing Settelement system gives me following error message: Message no. F5727 The maximum number of items for an FI document ('999') has been exceeded. It is due to the reason that after capitalization (

  • KPI Target based on Presentation Variable

    Using OIEE 11g 11.1.1.6.2 on a Windows XP machine I've created a KPI and also a watchlist. Added the watchlist to a dashboard that contains a Variable Value prompt. What I want is for the user to enter a target value and for that to be used within th