Which comm. channel is configured with a certain ftp server?

Hi,
i wold like to have a list of all comm.channels which are using a certain ftp server. How can i get this list

i dont think we have any shortes way to find..by checking manually then only we can differentiate else if your company follwoing proper naming standards then they will create individual bussiness component for every FTP.
Regards,
Raj

Similar Messages

How to configure sync with my local ftp server?

I have used XMarks since now because it hallow me to synchronize my bookmarks with my local server. Now XMarks don't work anymore because it's not more possible to synchronize the passwords.
Any other alternative imposes to use an external server and I don't want to use an external server. My data must remain on my machine it's absolutely excluded that i use an external unknown server for this.
The only solution must be a free solution (a real free solution) and the firefox synchronization seems to me the best/only one.
But I've not found how to configure it to use my own server.
So how to do it, where are the options to the synchronizer to give my own ftp server or whatever other server it needs?

iAS 6.0 sp4 officially does only support iPlanet Directory Server 5.0 sp1 and 4.13.
For more details visit: http://docs.iplanet.com/docs/manuals/ias/60/sp4/ig/prep.htm#42084
I guess, you can specify the directory server during the time of installation.
Thanks,
Rakesh.

Problem with passive mode FTP server and NAT

Hi,
I have a problem with Passive mode FTP and NAT.
I am trying to run both an FTP server and sharing the Internet connection via NAT. I have by the way specified the passive ports to use in ftpaccess (65000-65534). Everything works fine until someone tries to connect via Passive mode. I have tracked the problem down to the firewall and the rule that handles NAT.
Firewall rule config without NAT:
00001 allow udp from any 626 to any dst-port 626
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
Firewall rule config with NAT
00001 allow udp from any 626 to any dst-port 626
00010 divert 8668 ip from any to any via en1
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
So, passive ports do not work when NAT is on. If I turn it off, Passive ftp works like a charm.
But how do I solve my problem? I have in my quest for the answer stumbled upon "-punch_fw" but do not know how to use it or if it even helps me at all?
Best regards,
Peter
B&W G3 Mac OS X (10.4.5)

Media/Lacrosse-1-tiny.3gp
I can't find the file on your server.
They may also need to edit the .htaccess file to allow the .3gp file extension be used. Call them.

Trying to use the same ground for more than two channels (RSE configuration) with usb 6000

Hello,
I'm currently trying to set up a LabView code in order to get readings of voltage using 5 different locations simultaneously. I want to only use the first location as ground and obtain 4 voltage measurements between the ground and each one of the other 4 channels. I'm using a usb 6000 which for now allows me to use the same ground for only two channels. Is there a way to use the same ground for 4 channels?
Thank you,
Maria

You're right it is confusing the way I describe it so I ahve attached some pictures of the set up. The first figure is the cell filled with soil and the 5 probes inserted in it. The anode is placed at the left end of the cell and the cathode at the right end but they do not appear in the figure. I'm trying to use location 1 as gournd and take measurements of voltage from the following pairs: 1-2, 1-3, 1-4, and 1-5. The second figure is the DAQ I'm using. When I was trying to set up the RSE configuration, it was ussing ground A for the channels 6 & 7 (locations 2 and 3 in figure 1) but ground B for channels 4 & 5 (locations 4 and 5 in figure 1). What I am asking is which is the best way to use the signal from location 1 as the ground for all 4 channels. Is this more clear?
Thank you for your time!
Maria

N Channel independent configuration with DAQmx

For an application, where I need to give the user, the options of configuring 8 analog channels independently, what would be the best way to go ? ( He needs to set the min, max values, samples and acquistion type - SE, Diff etc )
Use 8 sets of "DAQmx CreateChannel( AI_Voltage_Basic)+ DAQmx Start Task + DAQmx Read VIs" or is there a VI which does this configuration as a single sub-VI ? I have searched enough to find one such.
Any ideas that can provide a compact solution would be welcome.
Thanks
Raghunathan
Raghunathan
LV2012 to Automate Hydraulic Test rigs.

Sean C. wrote:
Hello Raghunathan,
...you will have to create a Task with all channels you want to modify, then pass that Task to a Channel Property Node. You can then set the options for each channel independently. ...
See the attached VI for an example of this.
I hope this helps,
Sean C.
Applications Engineer
National Instruments
Dear Sean,
Thanks.
I guess I got your point. Let me repeat the steps - just to make sure:
1. In the example sent by you, create the required properties for all 8 channels using "add element".
2. Give a descriptive name for each channel.
3. Next click on each node and select "Create Control". This will provide the required user control on the panel.
4. Group all properties for each channel ( min, max,type,etc) properly and lay them out neatly.
5. Finally pass the duplicate reference out of this synthesised proprty node to a DAQmx Read VI.
Is that right ?
Now I think I sort of realise the power of DAQmx VIs.
Regards
Raghunathan
Raghunathan
LV2012 to Automate Hydraulic Test rigs.

JavaMail configuration with gmail as SMTP server

Hello,
I am trying to implement component based alerting in our new SAP PO 7.31 landscape. I have configured the steps according to the blog of Michel the necessary steps.
I am planning to use GMAIL SMTP server and hence trying to configure the parameters for the same. However in the Java Schduler Logs i could see exception TLS excpetion.
I tried configuring mail.smtp.host as smtp.gmail.com with my gmail credentials. Also i tried giving mail.smtps.host as smtp.gmail.com but no luck.
Please let me know incase anyone had implemented this scenario. Also please let me know whether it is possible to get the WSDL of the CMBA alert that gets raised.
Thanks in advance.
Regards

Hi Ameet,
We have it running on your PI systems. Please see the links below. Would suggest downloading Hermes and monitoring the error messages on the JMS queue.
PI Alerting on AAE/AEX
Customize E-Mail Body and Subject in Alerts in SAP PI 7.31 – Java Stack Only – Part 1 – ESR
How to send Alerts using UDF or JAVA Mapping
Customize Alerts Using Job in PI 7.31/PO
Regards
Jannus Botha

File adapter in comm.channel green, but no message collecting

Hello,
looks like this is something really at the roots.
Ok, we are in NW2004s PI 7.0.
One IDOC process is successfully implemented.
Now we started with a file to file communication!
File sender adapter is configured and shown in status green in comm.channel monitoring which would bring me to the idea that the comm.channel is configured well (To be sure we changed the directory path in the comm.channel to a wrong one which results in an error. Ok, corrected. Now all lamps are green). Comm channel is activated and polling.
But... nothing happens. The Adapter is not collecting the file in the source directory (existing) and there is no entry in monitoring on RWB or SXMB_MONI.
In Adapter monitoring all adapters except the JPR (red) are with a GREY lamp!
As we had an issue with activating the adapters (adapter monitoring before did not show any adapter (except JPR) ) two days ago we are not sure if the current issue belongs to a mistake in the configuration or in basis environment.
From XI 3.0 side we would expect that the adapter monitoring should show adapters used in green.
Do you have experience with such a behaviour?
Any help is welcome!
regards
Dirk

Hi Bhavesh,
we are near to bumping our heads against the server.
In comm.channel:
directory is : / (as simple as possible)
file name is : *.001
The file in the directory is named it_test.001 so it should be catched.
What can we do wrong?
By the way: If we change the directory to /out which is existing we have an (file is in this directory too) error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /out: The system cannot find the file specified. '.
Cache is fine!
regards
Dirk

Problem in File Receiver comm channel

Hi,
I can't see anything in the Recevier communication channel in the RWB > Component Monitoring>Comm. channel monitoring-->Comm. channels.
I do have selected my comm channel.Its showing the message as "Comm. channel is configured correctly and started". But I cant see msgID and Explanation or error. Even, I cant fine any info in Error log.
The diagnosis i did as follows. Let me know if u come across any thing.
Checked the logs in VA but i didnt found any information and is not upto date. Bad luck
*Recreated the Rcvr comm channel again and teste. Nohope.
In the MONI its showing successfull, but i cant see output at destination.
*cache is uptodate
I have checked the queues, nothing got stuck.All queues are clear.
*I cant restart the Server since it is in production.
Your suggestions are highly appreciated.
Thanks
SRI

Nilesh,
All the things you mentioned are done by XI IS. FYI plz chk below..
Send binary file "/home/dpiadm/xi/tmp/passthru/EDI_250123.rpz", size 60, character encoding 8859_1 with QoS EO
2007-10-19 13:48:43 Success MP: Entering module processor
2007-10-19 13:48:43 Success MP: Processing local module localejbs/SFTPFileUploadDownloadAdapterModule
2007-10-19 13:48:43 Success 192.133.217.6 /XI/SFTPTest pimsp kuljasimsim EDI_250123.rpz /home/dpiadm/SridharRajuMahali /home/dpiadm/xi/tmp/passthru/ EDI_250123.rpz Enable
2007-10-19 13:48:43 Success EDI_250123.rpz
2007-10-19 13:48:43 Success SFTPOutBoundEDIFileToFile
2007-10-19 13:48:43 Success SFTP_Sender_File
2007-10-19 13:48:43 Success 8878c990-7e6b-11dc-8137-001a4b065b86
2007-10-19 13:48:43 Success SFTPServerNameOrIpAddress 192.133.217.6
2007-10-19 13:48:43 Success Indiashining.txt SFTPOutBoundEDIFileToFile SFTP_Sender_File 8878c990-7e6b-11dc-8137-001a4b065b86 SFTPOutBoundEEIFileToFile
UNDEFINED
2007-10-19 13:48:43 Success Host Key Verified
2007-10-19 13:48:43 Success Socket Opened for Transport and connected..
2007-10-19 13:48:43 Success SFTP SshClient is connected
2007-10-19 13:48:43 Success Authentication Method is Public Key
2007-10-19 13:48:43 Success Ssh2 Client is Connected and Authenticated
2007-10-19 13:48:43 Success pimsp kuljasimsim
2007-10-19 13:48:43 Success /XI/SFTPTest
2007-10-19 13:48:43 Success /XI/SFTPTest
2007-10-19 13:48:43 Success localFolder2 + dropFileName2 /home/dpiadm/xi/tmp/passthru/EDI_250123.rpz
Entering to download file
2007-10-19 13:48:43 Success Current Directory before LCD0 : /home/dpiadm
2007-10-19 13:48:43 Success Current Directory After LCD0 :/home/dpiadm/xi/tmp/passthru
2007-10-19 13:48:43 Success download completed
2007-10-19 13:48:43 Success MP: Processing local module localejbs/CallSapAdapter
2007-10-19 13:48:43 Success Application attempting to send an XI message asynchronously using connection File_http://sap.com/xi/XI/System.
2007-10-19 13:48:43 Success Trying to put the message into the send queue.
2007-10-19 13:48:43 Success Message successfully put into the queue.
2007-10-19 13:48:43 Success The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2007-10-19 13:48:43 Success MP: Leaving module processor
The message was successfully retrieved from the send queue.
2007-10-19 13:48:43 Success Confirmation mode test found. File sent.
2007-10-19 13:48:43 Success The message status set to DLNG.
2007-10-19 13:48:44 Success The message was successfully transmitted to endpoint http://quark:8005/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System.
2007-10-19 13:48:44 Success The message status set to DLVD.
2007-10-19 13:48:44 Success The message was successfully delivered.
Note:- I AM NOT ABLE TO SEE ANYTHING IN THE RCVR COMM CHANNEL(RWB).
any Idea about, where can I see the message if it got stuck in Integration server apart from logs
Thanks
Sri Raj

How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
to Public URL = "proxy URL".
In Host Named Site Collections, alternate access mappings are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
URL is associated. This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
point HNSC to respond to a different URL(proxy URL). Consequently, Share Point URLs are exposed to external users.
Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If hiding the internal Share Point URLS is a requirement,
it suggests to use a web application instead of host named site collections.
Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
Excerpt from above article-
"Host Named Site Collections Only Use One Host Name
Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
are always considered to be in the Default zone. This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
calls to the same URL. If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

Hi Satish,
You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
It is by design that each host-name site collection only support one URL for each zone.
The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
https://support.microsoft.com/en-us/kb/2826457
So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Help (pleeeease) with configuring FTP server connection

HI...I am so frustrated. You have to understand that I am not completely stupid, but I just cannot understand the process which will allow me to connect to a **^&-**** FTP server!!!
Here's the deal:
Me, graphic designer, designing among other things, websites.
Dreamweaver, the software program that I use to design websites.
So, I design a site, and configure it to upload via FTP. I get the FTP hostname, username, password info from the intended Internet Service Provider, and load that info into the required fields in the Site Manager window. Everything is great until I try to connect to the server....it just won't do it! I get error messages that state flatly that I cannot connect to the remote server, for reasons that are as bland as "username and password information incorrect". I have called the ISP to determine if I am using the correct username, password blah blah blah, and everything checks out on their end. It seems that everyone else but me can connect to a bloody FTP server! Harrumph.
So...what can I do? Is it that something in the System Preferences panel needs to be adjusted to allow me access to FTP? I have fiddled around a little in there, but don't change anything, because I don't know what TCP/IP, proxy settings, etc. MEANS!!! All I did was allow FTP access (duh).
Another point of interest is permissions...somewhere along the way, during my long and convoluted journey with this problem, a message came up that mentioned that. Permissions. Don't know what that means either.
Is there anyone out there that can help me?? I am so confused, and just need a little education. I would greatly appreciate any advice or information. Thanks! Janelle
iMacG4 Mac OS X (10.4.7)

Hi Janelle: I assume the domain is georgeponzini.com
1. http://georgeponzini.com/index.htm works so we know you have an index.htm page uploaded to the server but it contains no information at all, like you uploaded a completely blank page, no title, no code, nothing, nada...
2. http://georgeponzini.com/index.html does not exist, you never uploaded a page so what we see is an error page, saying such a file does not exist.
3. The link you have ftp-dom.earthlink.net/ is for uploading directly from a browser but I could not get it to work in Safari but does work in Firefox, which you can consider downloading and using.
4. If you can upload from your Control Center at Earthlink.net, that's a no brainer, this is the option to take, you cannot make any errors doing it this way. But that we'll figure out next... It's ok you do not see a public_html folder you are probably already in it when you log in. Where you given instructions to upload into the WEBDOCS/ folder, if so you did that right.
BTW - have you checked with Earthlink that Control Center will work on a Mac using Safari asa browser
5. Your index.htm page/file is NOT where you upload to, the index.htm IS the 'Home Page' or 'Index Page'. You're seeing a white page because it contains no information, but you must have uploaded a file/page named index.htm (see 1 above)
6. If you have files/pages uploaded in the correct area, see if you can rename any file index.html - I am sure you can do this at the Control Center, if not do this on your computer and use 'save as' > index.html - upload this file/page and see if it displays
Let me know what happens, Rick
iMac G5 iSight 20" - 30G iPOD - HP Pav 15" WS and Toshiba Sat 17" WS Mac OS X (10.4.7) Canon 20D & A620

Records are missing in the File which XI has placed in Target FTP server

Hi All,
I have a scenario where in XI is transfering the files from ECC to Target System . No transformation required here . I am using AAE to run this scenario.
Issue i am facing here is that i can see few records missing in the File which XI had placed in the Target system FTP server . Same file if i check it in archive folder of ECC (which XI has archived after picking the file), complete set of records are present for the same file.
Need your inputs please....
Note : XI is using AAE to transfer the files and no mapping . Also i tried to check out the audit logs in the channel monitoring . Unforutanely i was not able to see the logs to check the bytes that was transferred while readng and writing the file . Sometimes i have faced audit logs issue in PI 7.1
Regards
Vinay P.

Please use temporary name scheme
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/6830e67f2a6d12e10000000a1553f6/content.htm
hope this helps
regards
Ninad

Receiver SOAP Comm Channel Settings with TServerLocation

Hello All,
We are working on using Dynamic Configuration of Receiver SOAP. We are using the following scenario
*Can anyone please guide us on Receiver SOAP Comm Channel settings*
1) Value to be used in Target URL
Which parameters need to be checked ?
Currently we are getting the following error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.util.URI$MalformedURIException: no scheme</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Truly apprecaite your help
Thanks.
Kiran

Hello
Can anyone guide me on the settings in receiver Comm Channel which uses dynamic configuration in TServerLocation ?
Thanks.
Kiran

Parameter name in module configuration of adapter module in comm channel

Hi Experts,
I have developed an adapter module to read a excel file , have used the module in the sender file adapter.
What entrie should i put in parameter name and parameter value in module configuration of adapter module in comm channel.
Im too confused,,pls help

Hi Ivan,
The code is basically to read the all colums add em under xml tags and read from second row on wards the data
please find below the module data code
public ModuleData process(ModuleContext mc, ModuleData imd)throws ModuleException
                         Object obj = null;
                         Message msg = null;
                         MessageKey amk = null ;
                    amk = new MessageKey(msg.getMessageId(),msg.getMessageDirection());
                    Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"Module called");
                    try {
                              obj = imd.getPrincipalData();
                              msg = (Message) obj;
                              XMLPayload xp = msg.getDocument();
                              if (xp != null)
                                    byte by[] = convert(xp.getContent());
                                         xp.setContent(by);
                                   imd.setPrincipalData(msg);
                          catch (Exception e)
                return imd;
               public byte[] convert(byte src[]) throws Exception
                    String xmldata = "";
               try
                         ByteArrayInputStream byteArr = new ByteArrayInputStream(src);
                         Workbook w = Workbook.getWorkbook(byteArr);
                         xmldata ="<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n\n"+ "<ns0:""MT_ExcelFiles"" ""xmlns:ns0=\"""urn:xyz:abc"+"\"> \n";
                           int a = w.getSheet(0).getRows();
                           int b = w.getSheet(0).getColumns();
                    for(int j=1;j<a;j++)
                               for(int i=0;i<b;i++)
                                              xmldata = xmldata + "<"w.getSheet(0).getCell(i,0).getContents().toString()">"w.getSheet(0).getCell(i,j).getContents().toString()"</"w.getSheet(0).getCell(i,0).getContents().toString()">";
                    xmldata = xmldata"</ns0:""MT_ExcelFiles"+">";
                    w.close();
          catch (Exception e)
       return xmldata.getBytes();

Using URL Parameters with HTTP Comms Channel

Hi,
I need to build a new interface (HTTP - RFC) which will use several URL parameters. I've created a HTTP communications channel and Sender Service and this works. I'm able to define several URL Parameters by checking 'Adapter-Sepcific Message Attributes' and then 'Apply URL Parameters' then specifying the individual parameters.
This is straight forward so far but in usual SAP fashion the documentation on HTTP Comms Channels and URL Parameters is non existent. My question is how do I use these parameters once they are passed. I need to use the values as input parameters for the RFC which means I'll need to map these in the Integration Repository I can't find anything on SDN or SAP help that answers the question.
I know I could include these values in the XML payload but that would mean my 'customer' would need to amend their application and I'd rather keep things as they are.
Looking forward to your replies.
Thanks in advance.

May be this could help you to refference . .
For each process template, you can define interactive or composite form reference objects that can optionally be executed at runtime.
To be able to see and execute the reference object at runtime, you must add an appropriate runtime view.
Prerequisites
You can only attach standalone interactive forms to a process. For more information, see Interactive Form Types.
Activities
To attach an interactive form to a process:
       1.      Open the gallery and select a process template. To open its design time, choose Open
       2.      To switch to edit mode, choose (Edit).
       3.      Open the Forms tab page.
       4.      Choose Add and select the type of reference object you want to add. You can choose between Callable Object and Development Object.
Browse and select the reference object, and choose Add once again.
       5.      Repeat step 4 to add more objects.
       6.      To define parameter mapping, select an entry and choose Map Parameters. Select a parameter from the left-hand table, and then select the parameter you want to map from the right-hand table. This groups the input parameters of the form reference object to the relevant input parameters of the process.
If the process does not define input parameters, you can set default values.
       7.      When you have defined the required mappings, choose Done.
       8.      Whenever a newer version of the form reference object is available, its status on the Forms tab page changes to (Deprecated). To update the object, select it from the list and choose Update. The status changes to (Active).
Parameter mapping is preserved unless the parameters of the new object version are different. In this case, you need to define mappings again.
       9.      Finally, choose (Save).

Problem with JDBC Comm Channel from UNIX PI Installation.

Dear Gurus:
Inside a standard scenario, we have a receiver comm channel which use JDBC adapter type to connect to a MS Access remote database.
The database connection is made like this:
JDBC Driver: sun.jdbc.odbc.JdbcOdbcDriver
Connection: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//10.96.0.10/c$/app/appdb.mdb
Working from a Windows 2003 PI installation, everything works fine..
But we recently have finished a Heterogeneous migration from Windows 2003 + SQL server to UNIX AIX + Oracle servers and that particular interface does not work anymore.
Is there a way to connect to a MS Access from inside a UNIX PI installation..? Is there a native JDBC or ODBC driver that we can use to fix our problem...?
Waiting for your help. Best regards.
Eduardo.

Hi,
In the JDBC receiver CC, Advanced-->Advanced Mode, use poolWaitingTime and taskTimeout parameters and specify
some time using seconds.
Babu

Which comm. channel is configured with a certain ftp server?

Similar Messages

Maybe you are looking for