Which commands would tell which version and which distribution?

Hello,
Which commands would tell which version and which distribution? Would it be uname -a?
From command below, how to tell if this is Redhat, Suse, or Oracle Enterprise Linux? Also, is the el5 means 'oracle enterprise linux version 5'? Thank you.
uname -r
2.6.18-128.el5

To find out the version of Linux distibution you are running, enter the following command at the shell prompt:
$ cat /etc/*-release
also, do check below link to know more about the same:
http://wiki.linuxquestions.org/wiki/Find_out_which_linux_distribution_a_system_belongs_to
Krishna

Similar Messages

Which one goes in the front and which one goes in the back? (4.1)

Long long time ago, (well around 999) I purchased this set of speakers from Creative. I believe it was something like Cambridge something. It was the first introduction of Surround Sound Speakers and it was a 4.1. (2 front speakers, 2 rear speakers and subwofer).
When I moved to USA, I brought them with me (and I still use them), but I lost the box and the manuals. I hook it up with the X-fi and works beautiful.
My question is:
I remember reading that two speakers had some difference (something connected with the distance I think) with the other two. Something like 3 meters and 5 meters.
Is that connected with which one goes in the front, and which one goes in the back?
Right now; the speakers in the front are really strong, but the ones in the back, are very soft. Is that right? Or should I swap them?
Thanks
Max

There are dozens of 1TB drives that will 'fit' - just make sure that they're 2.5" drives, 9.5mm 'thick'.
I don't like Western Digital but there are plenty of other brands out there.
I would recommend shopping at Crucial or OWC for both your new drive and RAM.
Clinton

EhP4 - which XSS version and which dependencies?

Hello,
we are implementing EhP4 on the backend and also ESS/MSS (XSS).
Would anyone know what version of ESS to use (603 ?) and also - in the NWDI - the dependent components - which ones will it be - 700 or 701?
Regards,
Andi

Refer to the following link for stack issues :
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/marcio+leoni

Looking for an app for a blue tooth, type I want to use on my Iphone is a "jawbone" Question is out of the many available in the store which one would be the best and most reliable?

Looking for an app for blue tooth on my Iphone. Out of the many in the app store which one(s) would be the best & most reliable? Currently trying to set up for an older Jaw Bone?

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

Just bought an Imac G5 but can't do much with it, how can I upgrade to neewer version and which is the next version after 10.4.11?

HI, I just bought an Imac G5 with 10.4.11 OS in it but I can't do much with it. I can't even wach Netflix on it because it needs a newer version of browser but I can't download newer version because My Mac's OS is to old, at least 10.6 needed. Can anybody can help Me? Thank you

No, sorry. It was only ever available on Disc. You can search places like eBay or Amazon for a Retail Copy. Do not get the Grey Set as they are machine specific. I don't think 10.5 will let you do much more than 10.4 as you said you needed at least 10.6 which is not possible due to the age of your Mac.
Cheers
Pete

What is latest NTB version and which FF version works with it?

I "had" FF12 and norton update somehow killed my norton toolbar. Since then, it's been almost three hours with norton tech remotely connected to me, uninstalling and reinstalling norton and FF. Rebooted about 25 times and used norton live update probably 50 times. Tried FF12, FF13 and FF14. Nothing worked, and now Java is disabled. Going in a circle;
Oddly enough, I can't find out from norton what is their latest V, and since the norton toolbar is popular, hoped someone here might know. thanks

Basically, Norton Toolbar doesn't support any version of Firefox older than 13. What you should be doing is this:
Use Firefox 15 ([http://www.getfirefox.com www.getfirefox.com])
Then, after that, update your Norton and your toolbar should work.
[https://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-15-Support-for-Norton-Toolbar/td-p/791174 https://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-15-Support-for-Norton-Toolbar/td-p/791174]
Just as a side note, most the features from norton toolbar are built into Firefox by default, so you don't even really need to use it.

HT2404 Hello totally new to mac computer,i need to know is the mac G5 obsolete,i have a chance to get one at a cheap price but it does not come with the os,where would i get os and which one? Thanks for any feedback!

No way for us to know for sure (without similar product/issues) but the
HP Support site suggests that with the current Mavericks OS X 10.9.x
their drivers should be available through Apple Software Updates:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Product-Support-using- Apple-Software-Updates-for-new-OS-X/td-p/3086229
However that may be limited to certain models of printers or scanners that
already had been known to be working under OS X as of that date in a
prior OS X (such as 10.8.5, 10.7.5, 10.6.8, etc) with earlier product support.
•Drivers and Downloads for Printers, Scanners, & More - HP Support:
http://www8.hp.com/us/en/drivers.html
A link to Mac OS X Support's List Printer & Scanner software (HP+ Other)
•OS X: Printer and scanner software available for download
HP Officejet t65 All-in-One Printer
{According to this page, your old printer has only Windows & Linux drivers
but you may or may not look into third-party driver support through such
sites as Gimp; though unlikely to be available with Mavericks, or Yosemite}
•HP Support Forum - Home:
http://h30434.www3.hp.com/psg/?lang=en&cc=us
You may be able to get a deal on a new printer as they are rapidly obsoleted.
PS: edit to add... there was a Gutenprint driver reference for T65 Printer here:
Mac OS X 10.5: Included printer drivers
Yet a driver for ancient Leopard 10.5.x may not be suitable for Mavericks 10.9.x
but the Gutenprint lead may be helpful to locate whatever may exist; or not.
https://www.google.com/?gws_rd=ssl#q=gutenprint+mavericks
Good luck & happy computing!
edited

Downloaded Mozilla-offered Scrapbook update, which opened instantly removing previous version and not showing its bookmarks. Where are they?

Scrapbook Tutorial says bookmarks should be there but can't follow its process for finding them, on Mac G4 with OS 10.4.11and Firefox 3.6.12
Please provide guidance.

Wow.. support level 'Zero' :(
I have been to the 'Live Chat' section for support 7 times to see if I can resolve this... but it's been closed every time!!
... plus I haven't had single reply on this forum question since I posted it 7 days form a user or admin.
Maybe it's time to use Safari :(
Look forward to some sort of support! ???

How do I use Edge Animate to make a clickable image which can be used in Author, and which will redirect you to a different page in your ebook?

If anyone has experience with Edge Animate, I know that I can make an image clickable, and I can insert a url to define where it will go once clicked. But I want to make a widget to use in iBooks Author, that can take the reader to a certain page of the book. Is this possible?
It all seems very complicated. Make one thing in Edge Animate, then somehow have that reference something in Author, which will finally work in an ebook. I have no clue where to begin.

Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
Let me know if you have any luck.
//Check to see if pageCounter already exists
if (typeof EC.pageCounter === 'undefined') {
// it doesn't exist so initialize it to first page
EC.pageCounter = 2;
//check if the page is only 1 digit -- patch for single digit
if (EC.pageCounter < 9) {
// it is, so we need to pad a 0 on the front.
EC.pageCounterString = "0" + EC.pageCounter;
//e.g. 01 ...09,11,12,13....115,222352,,....
else {
EC.pageCounterString = EC.pageCounter;
EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
EC.pageCounter = EC.pageCounter + 1;
//TODO for back -1

Which box to make app server, and which to make customer db?

I have 2 boxes:
1) a Sun ultra 10 w/40mb/s scsi, 160mb/s drive, 256mb ram, 366mhz sparc
2) a 1.7 ghz pc clone running linux 7.3, 256mb DDR ram, ATA-100 (but i can only make it run at 25mb/s)
both machines have 40mb hard drives.
i plan to run portal, enterprise manager, wireless (possibly, but not right now), single sign on (possibly).
should i:
a) upgrade the pc memory (by around 512mb), install infrastructure/apps there, customer db on sun?
b) upgrade scsi card on sun to 160mb/s, install infrastructure/apps there, customer db on pc?
i'm leaning more towards upgrading the memory on the pc, and maybe using web cache since scsi is more expandable than IDE in terms of simultaneous writes to drives (and oracle loves having lots of drives to write to simultaneously).
i guess a big factor in the decision is why oracle recommends that infrastructure and components should be placed on separate machines. is it due to security and/or less memory requirements on the component side, or is there another reason? i also don't see why infrastructure and components can't be placed on the same machine using IPC vs. TCP to connect the 2.
any suggestions/comments?
-- rob

Hi:
Separate boxes also means more licenses... isnt it ? of course it is :),even if in one box you run FORMS, the other REPORTS, the other one PORTAL, and the other J2EE apps... so this could be "unfair" :), and all parts together means 1 IAS :)
Besides CPU licensing how can Oracle measure USER licensing in a Web environment ? An example, the CPU licensing of IAS is the same price as licensing 50 users :)... my doubt sometime ago was "this 50 users are concurrent users or potential users" ?
And now i know that (citation) Named User: is defined as an individual authorized by you to use the programs which are installed on a single server or multiple servers, regardless of whether the individual is actively using the programs at any given time. A non human operated device will be counted as a Named User in addition to all individuals authorized to use the programs, if such devices can access the programs. If multiplexing hardware or software (e.g., a TP monitor or a web server product) is used, this number must be measured at the multiplexing front end.
So, if the named user licensing is not for concurrent users, i think that there are not any institution that will create a PORTAL to 50 users, isnt it ? and if it ccreate and say it, i think that lies :)
So, to an oracle customer to be "honest" with oracle, i think it's better to buy more SCSI 15K rpm hard drives and upgrade CPU's to 3Ghz :)))))))) for better performance, and i think that $20.000 (of another IAS license) it's enought to triple performance upgrading CPU's and hard-drives :)))
This was just a little note, because i think that in a WEB environment, the correct user licensing should be "user calls" and not "named users"...
Thanks
Joao Oliveira
PS: 9iAS r2 for win2000 seams to be very powerfull... and was much more easy to install than in Linux :)

Which web browser do you use and which is faster in your opinion?

safari or chrome?

bobthepanduh0131 wrote:
I thought Firefox was more prone to viruses ,and don't say it's not possible to get viruses on a mac because that's not true?
Name of viruses that are affecting OSX?

How to tell what version and platform created an InDesign File

Is there any way to tell if the InDesign file is created/or last saved on a Mac or PC and what version it is?
We receive files from many customers and some InDesign files appear to be passed back and forth between PC and Mac. Some fonts used are definitely PC and some are definitely Mac.
But we are not finding anything to give us the above info.
Thank you,
Linda Nivin

hold down the Command (apple) key as you click on About InDesign (with an open file) and you should see something like:
Scroll down through the Document History: and you will see a series of entries, starting with the creation.

Is there a way to view all of my reviews in the iOS App Store in one place, or even just to tell which apps I've reviewed and which I haven't?

The title pretty much covers it. I'd like to be able to tell which apps I've already reviewed, and which I haven't, so that I can review apps I haven't yet. I'd also like to be able to read reviews I've already posted so that I can post follow-ups if my opinions have changed with further use of the app. Any ideas? Thanks!
-Pete

You can do this in iTunes on your computer, click on iTunes Store > click Account > click Manage next to Reviews and Ratings.
More info in this Apple doc -> iTunes Store: How to remove a review you've written

SharePoint Databases - How to determine which ones are being used and which ones aren't

I am not sure where to exactly post this question. On the SQL Server side or on a SharePoint side.
I am a SQL Server Database Administrator who is monitoring some SharePoint databases. On a daily basis it seems that they are creating new databases but don't delete the databases that they are no longer using. For example, they might be testing
on a development server and if things aren't working properly instead of asking that the databases be deleted they just go ahead and create new databases to do what ever they need to do. Is there a way on the SQL Server side to determine which SharePoint
databases are being used and which ones aren't being used? Or does one determine this information through the SharePoint Central Administration console?
lcerni

Hello,
The following query gives you the databases now in use.
SELECT
DISTINCT d.name
FROM
sys.dm_tran_locks
tl INNER
JOIN sys.databases
d
ON
tl.resource_database_id
= d.database_id
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SCCM 2012 R2 ,which are the roles should be installed on CAS and which are the roles should be installed on Primary

Hi All
Which are the roles in SCCM 2012 R2 ,which cannot be installed on CAS and which are the roles which can only be installed on CAS . and which are the roles which should be installed on both CAS and Primary.

Here is the official list that describes where you can install the different roles:
http://technet.microsoft.com/en-us/library/gg712282.aspx#Plan_Where_to_Install_Sites
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Which commands would tell which version and which distribution?

Similar Messages

Maybe you are looking for