Which CPS Version for NW7.31?

Dear experts,
We are running CPS build M33.10-45085 on NW7.1
We are preparing an upgrade to NW7.31
Now, I really cannot find information on which version of CPS I should run.
Should we upgrade CPS?
Will CPS build M33.10-45085 run with NW7.31?
to which version should we upgrade?
I am stuck on PAM and its load of informations...
Regards
Greg

Hi Greg,
Yes, build M33.10 will run with NW7.31.
My suggestion is, since you are having a downtime anyway, and also M33.10 build is way too old, you can utilize the same downtime to upgrade the CPS build to the latest one M33.104 (at the time of writing). There are numerous bug fixes.
Upgrade NW to 7.31
Upgrade CPS build after NW upgrade, which shouldn't take more than 30 minutes.
Thanks
Nanda

Similar Messages

Manadatory SP stack and which kernel version for source Release 4.6c

Hello!
I have the following questions:
- Which support package stack and which kernel version are mandatory for Source Release 4.6?
- Has the SAP Business connector still any supports?
And some additional question regardind connection Lotus Notes with ERP 2005:
- What is the procedure to connect Lotus Notes and ERP 2005 (Do we need RFC-connects or RFC/BAPI?)
Can anyone help out or recommend how to proceed?
Thank you!
Regards
Axel

First I would like to recommend getting a good basis consultant to do that whole process. If you have never done such kind of big technical upgrade/conversion before it can become a totally frustrating experience.
> Do you all do Unicode Conversion first before going for upgrade process ?
4.6c is not available as Unicode. During the PREPARE programs/transactions will be imported to the 4.6c system where you have to run all the preprocessing step mentioned in the Unicode conversion guide. After that is finished, the system is upgraded and immediately after the exported and to be imported as a Unicode system.
Anyone have experience in doing CUUC to EHP4 under single upgrade ? My colleagues have upgraded 4.6C -> ERP 6.0 for EHP 1 only and we want to perform EHP4 and Unicode Conversion under single project. Appreciate anyone advice on this.
There are many many things to look after, too much to list here in a forum. As suggested I'd consider getting a basis consultant with experience in that area.
Markus

Which Excel version for SEM-BPS 4.0?

Hello! Anyone knows which Excel version works best or is minimum requirement for SEM-BPS4.0 (together with BW3.5). The intended use is Excel planning within SAP GUI.
Thanks,
Auvo Ahola

At least Excel 2000.
Regards

Which IOS version for 3925 fixes CSCul63961?

Hello everybody,
A little while ago we ran into CSCul63961 on one of ours 3925 routers.
I know, this bug-id speaks of Cisco 1900 integrated routers series, but according to Cisco TAC engineer we've been in touch regarding some other issue we had with the same box – claimed that 3900s are affected either.
Now, CSCul63961 seems to have been resolved lately – but all the 'Known Fixed Releases' don’t match software releases for 3900. Release notes for 15.4.3M (the latest s/w available for download for 3925) doesn’t mention CSCul63961.
This raises the question – what software version for 3925 fixes CSCul63961?
Any help will be appreciated.
Thank you.

Mheimby,
Sorry its not fixed in any of the 15.2 release. Its only fixed in the 15.4 (02)T onwards.
HTH
Regards
Inayath
**Plz dont forget to rate this post if usefull.

Which Oracle version for analytic sql?

Can anyone tell me from which Oracle version on there exists the "analytic sql"?
Thanks!

Hi,
Mark1970 wrote:
Can anyone tell me from which Oracle version on there exists the "analytic sql"?
Thanks!Analytic functions (that is, functions using the OVER keyword, such as
RANK () OVER (ORDER BY hiredate)) were introduced in Oracle 8.1
(It's no coincidence that in-line views were introduced around the same time, since so many uses of anaytic functions require sub-queries.
In-line views were first documented in Oracle 8.1, but they worked in Oracle 8.0.)

Which Companion Version for WebCenter Extensions in JDeveloper 11.1.1.5

My firm is using SOA Suite 11.1.1.5 for a variety of services which requires JDeveloper Studio 11.1.1.5. However, my firm also develops applications using ADF / WebCenter (currently 11.1.1.4, soon to be 11.1.1.6). While trying to experiment with a simple WebCenter application in JDeveloper and run a simple one-page test using the Integrated WebLogic domain within JDeveloper, the script used to "extend" that integrated WebLogic domain fails to execute successfully, stating extension JAR oracle.wc_adrs_template_11.1.1.jar is missing.
That JAR is provided by the WebCenter Suite JDeveloper Extension which is provided as part of the "Fusion Middleware Companion". I went to http://edelivery.oracle.com, drilled into Fusion Middleware 11g for my platform (Linux x86-64) then selected the 11.1.1.5 version of the "Companion". (I also downloaded the 11.1.1.6 version as well, more on that in a second...)
I unzipped the archive of the 11.1.1.5 companion, drilled into the Disk1/SmartUpgrade directory, then unzipped the WLsmartupgrade.zip archive, then copied jdeveloper_smartupgrade.zip to a folder on my Windows Vista machine used to run JDeveloper. I then started JDeveloper, went to Help | Check for Updates... then chose "Install from Local File" as the source and browsed to the location of the jdeveloper_smartupgrade.zip file and selected it.
The following compatibility errors were displayed:
Extension Required Version Installed
oracle.toplink min=11.1.1.1.0, max=11.1.1.4.99 11.1.1.5.37.60.13
oracle.jdeveloper min=11.1.1.1.0, max=11.1.1.4.99 11.1.1.5.37.60.13
Ooooooookay, so how about the 11.1.1.6 "companion"? I unpacked that archive, extracted its version of jdeveloper_smartupgrade.zip to a directory, then attempted to load that patch within JDeveloper 11.1.1.5 and encountered the following compatibility errors:
Extension Required Version Installed
oracle.toplink min=11.1.2.0, max=11.1.2.99 11.1.1.5.37.60.13
oracle.jdeveloper min=11.1.2.0, max=11.1.2.99 11.1.1.5.37.60.13
In short, the "companion" content labeled 11.1.1.5 requires extension versions TOO LOW for the default extensions installed as part of the 11.1.1.5.x build of JDeveloper. The "companion" content labeled 11.1.1.6 requires extension versions TOO HIGH for the default extensions installed as part of the 11.1.1.5.x build of JDeveloper.
Is there some other patch file somewhere that is compatible with the 11.1.1.5.37.60.13 versions of these other extensions? Again, it is NOT clear to me that upgrading JDeveloper from 11.1.1.5 to a newer version will maintain compatibility with the existing SOA Suite infrastructure I also need to interact with.
Thanks.

Thanks for your answer.
My Requirements are:
1) Develope a stand alone ADF FACES(JSF 2.0) application
2) Develope a Portal using webcenter- We need to implement portlets by taking some of the functonality that was implemented in section (1) and use the Portlet-JSF bridge to create the portlets.
Basically, we need to support JSF 2.0 standart.
As I understood I must use the JDeveloper 11.1.2 version as it support the JSF 2.0. but what about the Webcenter and the Portlet-JSF bridge to support JSF 2.0 ?
I will be happy to get a clarification for those requirments.
Thanks a lot !
Eli

WHICH ILLUSTRATOR VERSION FOR IMAC MAC OS X 10.5.8 LEOPARD?

hi there,
i have a question.
I am a proud owner of the new IMAC with leopard on it (currently 10.5.8) the current software i think.
Now i try to put Illustrator on it, well first of all i try to purchase it, which is the first stepping stone. Illu is sooo expensive!
which version would be the suitable first of all for my leopard and is there a cheaper way around???does anybody know?
i love illu and NEED IT!
thanks for any advice!!

The other alternative, which I have advocated here and on other forums, is eBay.
Contrary to what others may say or think, most software for sale on eBay is legitimate, and the few who aren't are easily spotted. eBay takes a very aggressive stance on these things which makes software sales there such a vibrant and active market.
And like Wade said, you can then get on the Upgrade path. And Adobe is very good about transfers of registration to enable you to do this. This is something I have done for years and it keeps my costs down.
Follow these guides and you won't go wrong.
1) Read this web page from Adobe: http://www.adobe.com/aboutadobe/antipiracy/avoid.html
and follow it!
2) You must, must, must use PayPal for all payments to cover yourself. And eBay has new protection also.
3) If the seller doesn't specifically state anything about the software or if the seller doesn't specifically state anywhere if the software is registered or not, ask the seller that and also if they will transfer ownership. If you don't get an answer before the end of the auction, don't bid! There are more sellers who will answer you. And keep a record of your correspondence by checking the button to send a copy to your e-mail account.
4) Look at how many sales the seller has done and the buyer responses and ratings. Very few or zero sales and 87% ratings are suspect.
5) Look at any pictures. If the seller took the picture himself then you have more confidence that you will get what you see than a stock photo or no photo at all. All software shown should look like commercial products, silkscreen logos and imagery on mass produced discs and not cd-rs with labels stuck on (pirate sellers usually are too smart to do that). Look at several of these and familiarize yourself with what AI CS3 and CS4 look like in bare disc form from other auctions there.
6) Use AuctionSniper to place bids at the last minute.
7) Compare prices on the versions of Adobe Ilustrator you want (CS3 or CS4). Some sellers ask ridiculous amounts for older copies of Adobe software. You shouldn't have a problem here but you could get Illustrator version 8 and an upgrade to CS3 for a combined total the is less than a full retail CS3. It depends on the market. Since you don't have a large budget do your home work and study the closing prices for the versions you want.
Follow these guidlines and you will get the software you want at a price you can afford.

Which Reader version for Mac Powerbook G4 10.5.8 PowerPC?

I received update notice for adobe reader version 9.4.6. With Adobe's help I finally was able to download flash player 10.1.102.64 for my Mac Powerbook G4 version 10.5.8, Power PC processor (1GB mem). Is the 9.6.4 version compatible with my computer or will I have the same downloading problems I had trying to update to the latest version of Flash Player? Currently PDF documents won't open from email attachments or many websites, such as for online movie ticket purchases. I have to save them to my computer first, then open. Hoping a newer version of Reader will fix that problem. Which version should I have and how do I download?

There's none. You need to either install it from the computer's original disks or buy an iLife 09 or earlier DVD.
(90171)

[Newbie] Which JDeveloper version for latest ADF Mobile?

Hi.
I was going to upgrade to JDeveloper 12c, but the download page says "Download JDeveloper 11.1.2.4 to leverage ADF Mobile".
Does that mean that for the purpose of using ADF Mobile - which is indeed my intension - I should use 11.1.2.4 instead of the latest 12c? Or should I install 12c and will I still have full use of ADF Mobile?
Thanks.
Joseph

Yes, this is correct. At the moment ADF Mobile development is done using 11.1.2.4.0 instead of 12c.
With the next release of 12c (12.1.3) we should see adf mobile in 12c version. However, as I'm not an Oracle employee, I can't guarantee this. We have to wait and see what we get.
Doing your development in 11.1.2.4.0 is already using some features of 12c and an later upgrade to 12c should not be painful.
Timo

H61M-E33 B3 - which BIOS version for i5-3570?

Hi
My motherboard is MSI H61M-E33 B3, I was using i3-2100 CPU, but a friend gave me his old i5-3750, which is far better. I updated my BIOS with Live Update before I swapped CPU's but I guess that my BIOS version is still wrong for this i5, because when I try to run my PC, it beeps 4 times and reset. So my question is, what is exact BIOS version I need for this CPU to work, and where can I download it? I would be really thankful for any help

Quote from: HenryW on 18-February-15, 08:03:41
Does it still work with the 13-2100? Did you clear CMOS after BIOS update?
Yes, and yes. Works perfectly with i3, and I've cleared CMOS, but it didn't help.
Quote from: Chike on 18-February-15, 08:06:21
Go to MB support page and check the compatibility list.
for the last 2 digits/letters, A=10, B=11, C=12 etc, so A2 will be 10.2
The problem is, on this page - http://www.msi.com/product/mb/H61ME33_B3.html#hero-overview - On the compatibility tab, my i5 is labeled as "7680vC0.zip" - so i guess BIOS version 12.0 - but on the downloads tab, I see only BIOS 12.3 and 12.2, and the next older one is 10.E :/ Should I download this 12.2 or 12.3 versions?
When I use my Live Update 6 program, with i3 CPU mounted, it tells me that my BIOS version is A.E0 and it is the latest one, and no need to update.
I'm really, really confused :P

PDF Printing APEX 3.2.1 (APACHE FOP) which OC4J version for Oracle 11g?

I am using APEX 3.2.1 on Oracle 11.g (under windows XP)
I want to test PDF printing (in advanced turorial) with standard config ( APACHE FOP no Oracle BI publisher).
When I look oracle doc : http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html)
prerequisites for installing WAR file (Installing and Configuring Apache FOP) imply downlad for Oracle Containers for J2EE (10.1.3.2) ,
once there : http://www.oracle.com/technology/software/products/ias/htdocs/utilsoft.html)
the accessed page seems restricted to Oracle Application Server 10g Software Downloads.
My question : is the last Version (10.1.3.5.0 : Oracle Containers for J2EE 10g (OC4J) (build #090727, 91 MB) - J2EE 1.4 compatible with EJB 3.0 / JPA 1.0 support ) also VALID for Oracle 11g ?

I just installed a similar setup with the following software combination and it works.
win32_11gR1_database.zip
oc4j_extended_101350.zip
jdk-1_5_0_22-windows-i586-p.exe

How do I decide which PDF version for print?

Hi
I'm almost finished this project and have another issue with printing. The colours aren't matching. I've used 'Kuler' for all my CYMK colours and for whatever reason, I can't nail the colours in my test runs and the client isn't happy. There are so many options when exporting to Acrobat and I'm thinking this may have something to do with this....dunno ;-)).
Any ideas?

There are a lot of small problems in your workflow which could add up to big problems on the output end.
Calibrating via the OSX software calibrator is better than doing nothing, but it's not likely as good as a hardware calibrator because it's depending on your empirical judgements rather than a colorimeter reading.
On the other end is the proof you are getting a contract proof? If you are using the default US Web SWOP CMYK profile does the proof match those printing conditions?
The bigger problems are with Kuler. Neither the AIR app or the web app are color managed, so in its color picker there's no way to know how the conversion to the displayed CMYK numbers was made, or what CMYK device is targeted (US SWOP, US Sheetfed, Euroscale?). When you view the swatches in Kuler you are seeing them in your monitor RGB space. When you port the swatches into ID they come in as the listed CMYK values, which are displayed via your doc's CMYK profile, so you won't get a match and the preview will change depending on the profile.
Also, the Kuler CMYK values have a huge amount of black in them—significantly more than you would get making the conversions in PS or ID with any of the default profiles.I think you would likely get better CMYK values by screen capturing the swatches in the Kuler app (OSX captures get tagged with your monitor profile), convert the capture to CMYK in PS using your destination CMYK profile, and use the resulting CMYK values in your ID doc.

Which Server Version for Domain Controller do I Need

Hello
We are currently running two domain controllers with Server 2003 on them. We have a standard TCP/IP star topology networking including web servers, files servers, sql, iis etc.
We are upgrading 5 of our servers to 2012r2 and are using them as "host" servers for upgraded IIS (2012r2) and WebGrabber (2008r2) servers and these servers will be set up as virtual machines (the IIS and web grabbers) on the hosts.
My question is will using Windows Server 2003 domain controllers cause issues in the advanced settings in 2012r2 and Hyper-V? Should we upgrade our Domain Controllers and if so to what version? 2008r2 or 2012r2?
Thanks!
Theresa Greene
Theresa Greene

My question is will using Windows Server 2003 domain controllers cause issues in the advanced settings in 2012r2 and Hyper-V? Should we upgrade our Domain Controllers and if so to what version? 2008r2 or 2012r2?
At least Windows Server 2012
I highly recommend to upgrade the Domain Controllers to at least Windows Server 2012.
Besides the new functionality described by others in this thread, Windows Server 2012-based Domain Controllers (and beyond) offer virtualization safeguards, building on the VM-GenerationID offered by your new virtualization platform. This functionality helps
to protect your Domain Controllers from USN rollbacks and Lingering Objects. It also unlocks the Domain Controller Cloning functionality, that may help you deploy your five Domain Controllers faster and more streamlined.
More information:
New features in AD DS in Windows Server 2012, Part 12: Virtualization-safe
Active Directory
New features in AD DS in Windows Server 2012, Part 13: Domain Controller
Cloning
Cases where VM-GenerationID doesn’t help make Active Directory virtualization-safe, Part
1
Cases where VM-GenerationID doesn’t help make Active Directory virtualization-safe, Part
2
Getting to Windows Server 2012
In terms of getting your Active Directory to Windows Server 2012, there's good news and slightly bad news. The bad news is you can't in-place upgrade your Domain Controllers to Windows Server 2012. The good news: This makes the transition scenario
more appealing.
Instead of upgrading your Domain Controllers on their physical hardware, and, then, convert them to virtual machines, you can build new virtual Windows Server 2012 Domain Controllers, while your Windows Server 2003 Domain Controllers remain running.
Then, when you're ready to get rid of your Windows Server 2003 Domain Controllers, you simply demote them and remove them from your network. I've written a detailed step-by-step on this:
Transitioning your Windows Server
2003 Domain Controllers to Windows Server 2012

Which BIOS version for K9A Platinum with 4GB memory / GeForce GT430 ?

I was running 1.4 with 2GB (2x1) Kingston memory and the GT430, everything OK.
Then I replaced memory with 4GB (2x2) Corsair memory and XP hung during startup ... changing voltage (1.9 to 2.1) & timings (4-4-4-12) didn't help, so I decided to flash to BIOS 1.9. Bad idea, the video card wasn't found anymore ... running 1.4 again now.
Anyone here with a K9A and similar setup and a BIOS > 1.4 ??

Quote from: Goner on 13-February-11, 01:43:14
Yeah, I know the PSU isn't the best one around. But on the other hand so far it never caused problems ... I'll get a new one before trying to put in the Corsair 4GB memory.
But in this particular case the PSu is not the problem ; if the K9A board detects the GT430 with BIOS 1.4, but not with 1.8 and 1.9 it's not the PSU's fault, right ?
I read on another forum that someone had the same kind of problem with a K9A, BIOS 1.9 and a HD5870 videocard. He claims he got hold of a 1.10b1 BIOS that actually fixed the problem ...
Will try attached BIOS ...
Quote
Yeah, I know the PSU isn't the best one around. But on the other hand so far it never caused problems ...
This doesn't matter, it can explode in each moment in flames and to kill all other parts installed in your computer.
[if you are not around when this hapends, the fires can destroy your home place too..]
It's the matter of time this to hapends... This PSU is a time bomb like Q-TEC, Colorsit, Codegen, HiTech and other similar cheap no name junks..
Quote
I read on another forum that someone had the same kind of problem with a K9A, BIOS 1.9 and a HD5870 videocard. He claims he got hold of a 1.10b1 BIOS that actually fixed the problem ...
This is known as AB1[listed as aka A1 in the prevision post],
the attached one is AB2[A2], aka 1.10b2[newer than 1.10b1] which fix and issue with Nvidia VGA mention,
[+ some other unknown vga patch from A1]
so it could helps for your case too

InDesign CS6: Is it possible to create a pdf in which the version for printing is different from that on the screen?

hello,
Everything is in the title!
The idea is to make a pdf that I send to clients by email, very graphic with colored backgrounds but when printed, the background becomes white to save ink. Similarly to the change of color of the text.
For example, on the screen when I open a pdf I see white text on a blue background but the impression we see black text on white background.
thank you

hi Bob,
With a little delay & my apologies, anyway, after a little test, your solution works very well. thx!!
A more flexible solution was given to me on the French forum by Mr. JR Boulay
"We need to generate 2 PDF, one with color and one in black and white. Open the PDF with Acrobat b & w and in the layers palette ask "Import as Layer" color PDF.
Who will come on top. In the Layer Properties it only remains to define the PDF / color layer as "not printable."
It will just be careful that the color PDF has no white background because in PDF it means transparency and thus we see through ...
(Just use black backgrounds at 1% to fix this problem). "

Which CPS Version for NW7.31?

Similar Messages

Maybe you are looking for