Which DAQ Driver I need to use for PCIe 6321 card

I tried to install DAQ 9.2.1mx downloaded from net, but then I was unable to use DAQmx related sub VI's.... Then I tried DAQ 9.0mx but same happened with that also... Please suggest the solution.
Any help from your side will be appreciated... Thanks
Solved!
Go to Solution.

LabVIEW 7.1 is too old, 8.5, 8.6, 2009 may be better. At the same you should choose the corresponding DAQ driver.
Colin
LV7.1/8.2/8.2.1/8.5/8.6/9.0/2010/2013; testing system development
Please Mark the solution as accepted if your problem is solved and donate kudoes
Home--www.colinzhang.net

Similar Messages

Which data sources I need to use for Actual&Plan comparision of GL Account?

Could you please let me know which datasources I need to use for Actual & Plan comparision of GL Account data?
Current SAP BI version is BI 7.0.
As per my knowledge, I am thinking of using the datasources 0CO_OM_CCA_1 for Plan data & 0FI_GL_10 for Actuals.
Is this right?
I have one more question here:
While extracting the data from ds 0CO_OM_CCA_1, I am getting only the Profit & Loss Account data where as the Balance Sheet Account data is not coming.
And also there is some confusion in VTYPE because the standard ds 0CO_OM_CCA_1 is giving the data with Value type 10 is & Version 000.
As we all know the VTYPE '10' stands for Actuals then how can we say that this ds 0CO_OM_CCA_1 gives Plan data?
Please clarify.

Hi,
Basically 0CO_OM_CCA_1 data source is used to extract actual, plan, and commitments.
This data is differentiated with value type, you can see sap note 523742 for more details on value type.
For balance sheet accounting data check the below link,
[http://help.sap.com/saphelp_nw04s/helpdata/en/5d/ac7d8082a27b438b026495593821b1/content.htm]
Regards,
Durgesh.

Satellite L300 - Which WLAN driver I need to use?

I reformatted the drive and installed Win XP Professional and updated the BIOS. The Realtek 8187b Wlan driver is not recognised in the device properties. There seem to be three different brands of drivers listed but do not know which one is te correct one.
I made sure the WiFi switch is on. (Fn + F8 does not work).
Any help appreciated.
Klaas
(New Zealand)
TOSHIBA Satellite L300 PSLB0A-02L022
System Serial Number: 48095678Q
Board: Intel Corp. Base Board Product Name Base Board Version
Serial Number: Base Board Serial Number
Bus Clock: 533 megahertz
BIOS: INSYDE 1.50 07/10/2008

Hi Klaas-bcs,
Your notebook belongs to PSLB0A series and therefore you can get all drivers on Toshiba Australian page:
http://www.mytoshiba.com.au
Youre right that there are different drivers listed but if you have a Realtek WLAN card you have to download the Realtek RTL8187B Wireless LAN Driver
Check this!!!

Which user role I need to use for import WSM policies?

Hi.
I'm looking for a user role that has the grant for to import new policies in wsm via EM (soaadmin em).
There is a preconfigured user that can do that?
If no, how can I create one new give him the right permission?
Is it possible?
Obviously using the admin one I can made this operation but ADMIN has too many privileges.
Thank you
diego

Hi Colins,
Thanks for your suggestion to create a sample on the APEX. I will do that and will post the problem in the FORUM.
Normally I add my name at the end of each conversation in the forum. I forgot to add one in this thread.
Cheers,
Krishna.

Just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented. is it wise to do this or should i not??

just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented. is it wise to do this or should i not??

Let's hope a couple things: that you have bootable clones of your drives also; that the backup drive for TimeMachine has over 3x capacity of the data you plan and are storing. I would also switch TM backup drives so you have a 2nd.
Fragmented free space affecting performance happens when the drive is too full which may mean there isn't enough free space for a full backup set.
1.5TB for backing up 500GB, while WD Green 3TB is $140 and WD Black 1.5TB is, about the same price.
I'd be worried about the integrity and directory, and whether you can afford to lose that drive. Defragging is also a very slow operation. the ideal: to just clone a drive, or start over with another drive and wait. cloning TM volumes has not been done or has it? SuperDuper hoped to but I don't think they or Bombich's CCC made it there.
Trouble with highly fragged is when free space gets to 20% normally, 1/3 or so though for TM volumes, and finding where and a chunk of space for the file being written. Does TM use large spare image files of like 2GB?
Best would be to ask in the TimeMachine section Snow Leopard
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard?view= discussions#/?tagSet=1009
where there are some good FAQ and tutorials, and people that know the ins-and-outs and shortcomings.

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

It would be much better if you had separate drives for the pictures and Time Machine backups.....but, if you want to use the same drive for both purposes, temporarily move the folder with the pictures to another location for safe storage.
Run the Time Machine backup on the hard drive and verify that everything is working correctly. Time Machine will format the disk for you in Mac OS Extended (Journaled) as part of the backup process.
Then move the folder with the pictures back to the hard drive with the Time Machine backups.
When you have tested to make sure that everything is working again, then and only then should you delete the folder with pictures from the temporary storage area.
Again....it would be much better to keep Time Machine backups on a drive just for that purpose, and other data on another drive for that purpose. This is clearly one of those times when the fact that you can do something does not mean to imply that you should do it.

Which video capture card/divice need to use for adobe premier pro

which video capture card/divice need to use for adobe premier pro

For DVD, I prefer this merthod:
http://www.videohelp.com/tools/XviD4PSP
For DV cameras, you just need to hook it up via FireWire.

I have always paid for apps with a credit card and now need to use an app store card but I can't get past the point where it keeps wanting my credit card updated. And can't used the app card number. Any advice???

I have always paid for apps with a credit card and now need to use an app store card but I can't get past the point where it keeps wanting my credit card updated. And can't used the app card number. Any advice???

I do NOT like using my credit card if I don't have to, and I went out of my way to go buy an Apple gift card, which I successfully redeemed into my Apple account. However, when I use the Apple "Cards" app, it will not let me use anything other than my credit card. I tried purchasing a card, hopefulling it would come out of my Apple store balance, but no such luck -- it came out of my credit card.
Apple is becoming more like Microsoft every day.

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup. Its been several months and now when i try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I a

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup.
Its been several months (many upgrades to the iMac software during this time), and now when I try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I also tried "reloading" software from the Western Digital site, but after following all the instructions, it looks like my iMac doesn't support this software (I can't even locate it after I follow all the instructions.
Thnaks, for anyones ideas on how I can get this working again.....

First of all, you do not really want to use their software; if you want a bootable clone, use either Carbon Copy Cloner or SuperDuper. If you simply want to drag and drop some files, you don't need software to do that. The important thing on any external drive is that you format/partition it correctly (Mac OS Extended (Journaled) and using GUID partition scheme).
Unfortunately, I don't know anything about WD drives or their software, so I don't have any idea what kind of backup you did. Having said that, it should still recognize the external even if it's outdated. Have you tried mounting it manually in Disk Utility? If you can get it to mount, you could (worst case scenario) just drag your stuff off onto your internal and then reformat the external.

My iMac suddenly can't read the backup hard drive I've been using for Time Machine. I did NOT just upgrade the OS or anything. The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago.`

My iMac suddenly can't read the backup hard drive I've been using for Time Machine. I tried unplugging the cord that connects the HD to the iMac and plugging it back in, but I still get "The disk you inserted was not readable by this computer" below which are buttons for Initialize, Ignore and Eject. I was using a cord that went from larger square plug to larger square plug. So then I tried one that went from smaller square plug to what I think is USB (thin rectangular plug) of the sort that connects the keyboard and mouse. It's the type that my printers and scanners use to connect to the iMac. I did NOT just upgrade the OS or anything. The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago. What else can I try before just trying to initialize and

Thanks, Michael! I do hear it at times spooling up and running. Just after I bumped the thread I looked for troubleshooting for this drive online and found the manual which suggested using Disk Utility which I've seen before accidentally (if I hit Command Shift U instead of Shift U to type "Unit" on a new folder for a student's homework ) but had never really noticed. Disk Utility does see it and also a sub-something (directory?) which might be the Time Machine archives on the disk, called disk1s2), sort of the way that my iMac's hard drive shows up as 640.14 GB Nitachi HDT7... and has a sub-something titled DB iMac, which is what I named my iMac's hard drive.
Anyway the owner's manual just shows the image under the formatting section, not the troubleshooting section, but as soon as I saw it in the manual I remembered seeing it accidentally a few times, went to it, and am now verifying the disk. Right now it's telling me that it will take 2 hours to complete the verification, so I guess I have a bigt of a wait. :-)
Does that fact that Disk Utilities can see it mean it's not failed, or just that it hasn't completely failed?
I can see the virtue in having multiple redundant backups, or at least two backups. What do you suggest? Two external hard drives? I had this one linked by ethernet, and but I also have a cord that could link it by USB (like a printer), so if this one is reparable I could get a second one and link it by USB. If this one is not reparable I could get two and do the same thing. I do have an Airport so I suppose it's possible to get some sort of Wi-Fi hard drive (my new printer/scanner uses only the network and not a cable, although it has a cable that I used for the initial installation), but I'd suspect a Wi-Fi hard drive might have a higher price.
What hard drives, if any, do you recommend? I seem to recall that when I was looking at external hard drives 4 years ago, Apple's were substantially more expensive, which is why I got the OWC Mercury Elite All Pro.

Which quick time should I be using for windows vista?

which quick time should I be using for windows vista? when I look at the plugins I'm using for Google Chrome Browser there are several listed for Quick Time, do I need them all?

when I look at the plugins I'm using for Google Chrome Browser there are several listed for Quick Time, do I need them all?
Yes. The seven different plugin dlls (npqtplugin.dll, ntqtplugin2.dll, etc) each handle various different file formats.

Which nvidia driver version are you using?

Because graphic card becomes more important in Premiere Pro (CS 4.2), I wonder which nvidia driver is working really stable for you. In some forums people tell of nonstable versions after 19x.xx. Which version do you recommend actually? BTW, I'm using a 9600GT.
Thanks

I'm using 195.62, which is current on the nvidia site and all is well.
Dennis Sladek

Which application of Netweaver will be useful for JAVA professionals

Hi,
I am new to Netweaver and need to know which application of netweaver will be useful for me. I am basically a JAVA Programmer.
What exactly i can learrn in netweaver. EP,Webdynpro or XI.
Regards,
Sujan.

Hi,
Netweaver Portal(EP) is a frontend which provides one solid interface to all your applications, whether they are SAP or not. It runs on the java platform.
You can develop pure j2ee applications using the Netweaver Developer Studio, it has plug-ins which help in developing SAP technologies such as Web Dynpro, but you don't have to use it, you can develop your application using pure java technologies like EJB, jsp, etc. It also provides a solution for deploying your apps to the web application server.
In EP & WebDynPro, you can easily code if you have Java knowledge.Java is a big part of being a Portal Developer.
Hope this helps.
Regards,
Pooja.

What settings do I need to use for an indoor basketball game?

What settings do I need to use for an indoor basketball game?

Sit as close to the game as you can possibly be. If you can sit on the ground on the sideline, do that. If you are closer, you can use a shorter mm lens setting, so you can use a less expensive and/or wider aperture lens. It can also mean a less-fast shutter to counter camera shake (though subject movement will still be an issue). It will also mean you can crop the photo less, which improves IQ too. It may also mean you can avoid the ugly part (the longest part) of a lens like the 70-300mm, and use the sweet spot instead.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

no.

Which DAQ Driver I need to use for PCIe 6321 card

Similar Messages

Maybe you are looking for