Which datasource has PAYR and REGUH tables

Hi,
Can anybody please tell me PAYR and REGUH tables are from which datasource.
Thanks in advance for all your help.
Points will be rewarded.

Customer Enhancements of the Extraction Structure
You can enhance the extraction structures for DataSources 0FI_GL_4, 0FI_AP_4, 0FI_AR_4, and OFI_TX_4 in the SAP R/3 system by creating user-defined include structures or using transaction RSA6. The following customer includes are supported:
Application --- Accounts Payable
DataSource --- 0FI_AP_4
R/3 Table --- BSID / BSAD
Include Structure --- CI_BSID
· If all fields in the customer include structure are contained in the above-mentioned R/3 table, no further ABAP programming is required. In this case, the fields in the customer include structure are automatically supplied with data by the DataSource extractor.
· If there are fields in the customer include structure that are not contained in the above-mentioned R/3 Table, these fields cant be filled using a function module created by the user. For more information see note 410799. Alternatively you can use the BW standard exits for extractor enhancements. Programs from the SAP standard are not modified by this customer interface.
Please check out...
http://help.sap.com/saphelp_nw2004s/helpdata/en/af/16533bbb15b762e10000000a114084/content.htm

Similar Messages

Which package has useradd and groupadd

Hi
I am new to Arch64
I knew in arch i686 util-linux has "useradd" and "groupadd".
However, I only found util-linux-ng in Arch64, but it doesn't contain useradd and groupadd utils.
Any help?

shadow

Tried to update, now comp/itunes wont see phone which only has cable and itunes showing

Hi, I tried to update iphone to new update, I updated itunes first but when I tried to update the phone I got unknown error (code was 1604 i think) first had phone in dock so tried again and the third time I went to try with the original cable but Itunes/my computer wont see it. the screen has a picture of the usb cable with arrow pointing to Itunes logo. I have tried the Apple help which included reset (both buttons 10 seconds) using different usb port and others from general help.
Can anyone help get the basic operating system back onto the phone please.

http://support.apple.com/kb/HT1808

Relevant datasource for ANLA and ANLC tables?

Hi,
In breif these are the relevant tables
ANLA and ANLC , in this i can able to find the datasources for ANLC i.e, 0fi_aa_11, but my requirenet is to have both tables in one datasource. And more as far as my search there is no relevant datasource for ANLA table, if not how to acheive this?
Thanks in Advance
vas

Or else you can use two datasources for this purpose. Check here:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erpfi/overview%252bbw%252bdelta%252bextraction
Thanks...
Shambhu

Reg: pernr and reguh table

hi guru's.
iam fetching bank details for employess from reguh and regup using the field pernr,since pernr is not a key field in reguh,it gets more time to fetch( around 45mins ).is there any method to make it fast?????very very urgent .....plz help.......
thanks in advance....
with regards,
balaji.s

Have you tried to look at the vendor(LIFNR) or payee number(EMPFG) . Does these numbers correlate with the personnel numbers?

P and Q table

When P and Q table are generated?
every time that a characteristic is activated?
Joseph

Hi Friend,
Did you meant to ask :
Does P and Q table are created everytime you activate a characterstic ?
If you meant this then the answer would be No.
They are not created everytime but only during the first time activation while creating Characterstic. Afterwards if you make any changes to characterstic which inturn affects P and Q table then these tables are automatically updated on activation, hence these are not created on every activation.
Regards
Hemant Khemani

How to find which datasource are using tables AFRU ,CAUFV and AUFM

*how to find which datasource are using tables AFRU ,CAUFV and AUFM*

Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman

How to find which datasource is using table JCDS?

How to find which datasource is using table JCDS?

Hi,
Please find the below link and identify whether will it meet your requirement or not ... If it meets your requirement then I can provide you more documents related to the same which we have in our project.   We were using the same for Plant Maintanance project...
For this report the required information is gathering from the different data sources from the ECC system. This report requires object status functional location attributes, Equipment attributes and some specific information apart from normal transaction data for an order.
u2022     Main feeding data sources for this report are 2LIS_17_ORDER and 2LIS_18_ORDER.
u2022     Requires the object status data (system status, number object status and un-number system status) is feeding from different DSO where the status data is staging with different data flow.
u2022     Requires the Order planned end date which is dependent on the operation planned completion date. so we are feeding this field from Operationu2019s DSO where the planned date is staging with different data flow.
u2022     Required characteristic data and attributes of the Functional location is getting from the master data .The 0FUNCT_LOC is updating by master data data sources
u2022     Required standard class of the functional location is updating from other DSO where the classification data is staging with the help of different data flow.
2LIS_17_ORDER and 2LIS_18_ORDER Data flow Details : No enhancement was done for these data sources .
Status Data Flow Details:
The status data is staged because ,this dat is required for the reports based on the Orders, Operations , Notifications, Functional Location and Equipment.
To load suitable data to different DSOs from the Status DSO we maintain the Filters for status profile and status at DTP level.
Required status change dates are deriving based on changed on date ,system status while loading from status DSO to Order DSO.
The system status ,Number object status and un- numberd object status are feeding from status DSO only.The status DSO is updating by u20180TE_OBJ_STATUS_HISTu2019.This Is based on the tables JCDS,JSTO and T000.
JCDS     MANDT     =     JSTO     MANDT
JCDS     OBJNR          =     JSTO     OBJNR
T000     MANDT     =     JCDS     MANDT
This DS has enhanced for the below two fields
1.     Order Number
2.     Operation/Activity Number
The Logic to populate the above two fileds is as below.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/1522bae6aa46b8802dca454e846d58/frameset.htm
regards
BVR

How to find out which user has locked a particular record of a table

Hi
Is it possible to know - which user has locked a particular record (I know the primary key of the record) of a table
Regards

select     OS_USER_NAME os_user,
     PROCESS os_pid,
     ORACLE_USERNAME oracle_user,
     l.SID oracle_id,
     decode(TYPE,
          'MR', 'Media Recovery',
          'RT', 'Redo Thread',
          'UN', 'User Name',
          'TX', 'Transaction',
          'TM', 'DML',
          'UL', 'PL/SQL User Lock',
          'DX', 'Distributed Xaction',
          'CF', 'Control File',
          'IS', 'Instance State',
          'FS', 'File Set',
          'IR', 'Instance Recovery',
          'ST', 'Disk Space Transaction',
          'TS', 'Temp Segment',
          'IV', 'Library Cache Invalidation',
          'LS', 'Log Start or Switch',
          'RW', 'Row Wait',
          'SQ', 'Sequence Number',
          'TE', 'Extend Table',
          'TT', 'Temp Table', type) lock_type,
     decode(LMODE,
          0, 'None',
          1, 'Null',
          2, 'Row-S (SS)',
          3, 'Row-X (SX)',
          4, 'Share',
          5, 'S/Row-X (SSX)',
          6, 'Exclusive', lmode) lock_held,
     decode(REQUEST,
          0, 'None',
          1, 'Null',
          2, 'Row-S (SS)',
          3, 'Row-X (SX)',
          4, 'Share',
          5, 'S/Row-X (SSX)',
          6, 'Exclusive', request) lock_requested,
     decode(BLOCK,
          0, 'Not Blocking',
          1, 'Blocking',
          2, 'Global', block) status,
     OWNER,
     OBJECT_NAME
from     v$locked_object lo,
     dba_objects do,
     v$lock l
where      lo.OBJECT_ID = do.OBJECT_ID
AND l.SID = lo.SESSION_ID
hope this helps
Zekeriya

Search a text in a multiple tables and one table has BLOB column

Hi,
I couldn't find a solution/examples for below scenario in oracle text documentation or related forums.
I need to search a text in a multiple tables,in that one table has blob column which is used to store the documnents(pdf,doc,jpg..etc) and other tables have varchar2 columns,These tables have realation each other.
Please provide a sample examples for above scenario.
Thanks in advance..

Have a look at my blog entry here:
https://blogs.oracle.com/searchtech/entry/indexing_data_from_multiple_tables
That describes two methods of achieving what you are looking for.

Paymnet document not reflecting in REGUH and REGUP table

Hi Expert,
I have run f110 and payment is made to respective vendor,but the payment document is only reflecting in PAYR table and not reflecting in REGUH and REGUP,tables
can anybody explain me reason for such kind of situattion
Thanks in advance
Regards
Pankaj

hi,
Please check the logic implemented for down payment. Basically, the check printing will have two categories 1. Payment against invoice 2. Down Payments.
In the first case we normally use F-58 transaction, when you process the transaction cheque will automatically get updated and tables PAYR, REGUH and REGUP will be updated.
In case of down payment we use F-48 and then assign the chequq manually - during this process tables PAYR will be updated but not REGUH and REGUP. Hence we need to go BSEG table.
Please check the logic implemented for down payment scenario for "Amount
regards,
santhosh kaparthi

How to identify which data has been inserted to the table in specific date

Hi,
i created one table without data column.. i am inserting data in that table.
i want which data has been inserted today..
Please help.
Thanks,

If you are in Oracle 10g you can use ORA_ROWSCN.Note that unless the table was created with ROWDEPENDENCIES enabled, though, ORA_ROWSCN is tracked at the block level rather than the row level. So a block with one new row and many old rows could appear as having all been entered today.
Justin

Generic datasource based on custom table and hierarchy table

Hi Gurus,
I have a doubt regarding generic datasource.
my requirement: to create a datasource with 10 fields. (7 fields from custom table and 3 fields whose values can be derived from a hierarchy table).
I have a custom table. In this table one field refers to a hierarchy table. Using this hierarchy table, we can derive values to 3 new fields.
My question is, If i create a generic datasource based on the custom table, how can i include the extra 3 fields which gets values from the hierarchy table.
Where can i write the logic to extract the values for those 3 fields from the hierarchy table.
Thanks
Regards,
Aarthi
[email protected]

Hi Aarthi,
Sample code in the user exit woul be like this:
DATA: i_biw_tab LIKE BIW_MARA_S.
WHEN '<data source>'.
    LOOP AT i_t_data INTO i_biw_tab.
      SELECT fields
        INTO <table from which you want the value
        FROM <table>
       WHERE <your condition>.
      IF sy-subrc = 0.
             MODIFY i_t_data FROM i_biw_tab.
      ENDIF.
    ENDLOOP.
Bye
Dinesh

Relation between REGUH table and Infotype 0015( PA0015table)

Hi Experts,
Can anyone provide some info. about use of REGUH table. Like when it is used/updated esp. in context of HR Payroll?
Functionally,What is the relation between Infotype 0015 and REGUH?
Thanks
Achyut

hi,
REGUH table stores the amounts which are used for check printing and bank transfer for an Employee.
this table is updated by running a program called 'pre-program DME'. once you update this table, then you can print checks/ perform bank transfer.
so this table holds all the amounts even WT's amounts given in IT0015.
hope i answered your question.
if you have still queries, just revert back.
regards,
salman.

Which datasources covers these tables :

Hi,
which datasources covers the following tables :
Table
lfa1
adrc
adr6
bnka
lfbk
tiban
lfb1
T001
lfbw
T052
T042
lfm1
T024e
wyt3
tpart
Many thanks in advance.
BR//
M. Sajid

Hi,
The way to find the datasources where these tables are used can be :
1. Go to SE11, give table name ROOSOURCE
2. Go to contents of the table with all entries
3. Give your table name, you can find the datasources where these tables are used.
4. Remember the field in table selection, EXSTRUCT has to be selected
The above steps are to be performed in ECC.
Hope this helps,
Regards,
Rama Murthy.

Which datasource has PAYR and REGUH tables

Similar Messages

Maybe you are looking for