Which Digidesign interfaces work best with Logic Pro ?

Can anyone tell which of these work best with Logic if any at all?
- Digi-003
- M-Box Pro
- M-box2
- M-Box mini
- M-Powered

Thanks for the posts
After hearing complaints about latency, driver
issues, horrible quality,incompatibility with there
plugs in logic as well as no chance to stand against
performances and sound quality of other hardware half
there prices i thought to ask.
Wow. All that??? And then they recommend Migraine-Audio to you??? I don't think those posters know what they are talking about.
I've been using Logic since it could be used with Digidesign hardware, from version 4.8.1, and it has always worked very well.
It does pay to research the setting up of a DAW computer, as it is almost never just "plug-n-play" like many people believe. But once it is set up, it can run for years without problems. Most people experience problems because they change the setup, install free plugins, change audio gear, every other day of the week, and of course, that makes for a very unstable situation. No wonder they complain. But it is their tech-ethic they should be complaining about, not the equipment.
Can anyone verify there set ups and latency?
Here's one extensive test I did on my Digi 002R:
http://nicksevilla.com/logicpro-som/LogicTests.html
The latency is the same as with other comparable FireWire interfaces. Not more, and not less.
i wont drag this out into a long post i just want a
round about, all logic users in other forums seem to
be against Digi hardware, most advised to buy the
cheapest possible M-Audio interface just to run M
Powered Pro Tools if i realy need PT at all.
Really??? All of them???And did they know they are advising you to buy stuff that actually does NOT work properly??? Shame on those posters you read, as Digidesign drivers are a LOT more stable that the Migraine-Audio ones. Digidesign themselves told me to stay away from M-Audio... so you read into that whatever you like. I'll keep that advise from them.
Cheers

Similar Messages

  • Which OSX version works best with Logic Pro 7.2

    Hello everyone,
    Was hoping i could get some opinions on which osx version works best with logic 7.2
    i currently have OSX 10.4.2 but i would like to update at least to 10.4.3 (that is least required to run logic as stated in install manual)...
    should i go for 10.4.4, 10.4.5 or 10.4.6 ?
    which would run best with logic pro 7.2?
    thanks much everyone
    Quad G5 2.5ghz 3GB RAM   Mac OS X (10.4.2)  
    Quad G5 2.5ghz 3GB RAM   Mac OS X (10.4.2)  

    10.4.5 was rock solid for me, and three days into heavy Logic use at 10.4.6 is proving to be just as good.
    Get caught up, and go ahead and update to 10.4.6

  • Which midi controller works best with Logic Pro?

    I want pads to make drum loops etc.   I'd also like to slice and edit samples.  So far I've looked at Akai MPCs and N.I. Maschine.

    OK I found one... the Akai LPD8.  Excellent product.  It is so much more intuitive to play drums on these 8 pads rather than on the keyboard. You don't need the displays or extra pads of the more expensive models.  This has a nice on screen editor that is very programmable and it was plug-and-play in UltraBeat.  It's powered through the supplied USB cable so you don't need a power adapter. This is strictly a controller and has no on-board sounds but the sounds in Logic Pro and Garage Band are amazing. Well worth the $49.95!  You can slice and dice in Logic so that function isn't needed; similar effects can be acheived by simply holding down the pad and releasing it as a sound is modulated.  Also it is very portable - the size of your laptop keyboard.  Great fun!

  • Which video camera works best with Premiere Pro CS6

    I'm a beginner in working with PP and need to purchase a video camera which will work seemlessly with Premiere Pro.  I don't want to go through a lot of conversion steps. I want to tape my kids sports, be able to take the raw video right from the camera to PP and begin editing, copying etc. Does the Canon HFM 500 with ABCHD formats provide what I need or do I need something more sophisticated?  Just getting started with the whole video editing thing and want to make the right choices before buying a camera. Thanks for any input.

    This message has a really good graphic about requirements
    - http://forums.adobe.com/thread/810750
    More about Requirements http://forums.adobe.com/thread/618058
    Disk Configurations http://forums.adobe.com/thread/878419
    What I built for CS5 and the camera I use are in http://forums.adobe.com/thread/652694

  • Which cable modems work best with Time Capsule?

    Which cable modems work best with Time Capsule? I have Time Warner in SoCal. I am replacing my old Motorola cable modem (constantly cuts out and needs to be reset) and I also bought a new Time Capsule. I will be using the Time Capsule for my wireless network and for back ups. Thanks.

    These are the cable modems supported:
    Vendor
    Model
    Motorola
    SBG6580
    Motorola
    SB6141
    Motorola
    SB6121
    Motorola
    SB5101
    Motorola
    SB5101U
    Motorola
    SBG901
    Netgear
    CG3000D
    Netgear
    CMD31T
    Zoom
    5352
    Zoom
    5350
    Zoom
    5341J
    ZyXEL
    CDA-30360
    If anyone has used one of these with Time Capsule, feedback is appreciated. Thanks.

  • Will Lion work ok with Logic Pro and 3rd party plugins?

    Will Lion OS work ok with Logic Pro and 3rd party plugins?
    Any help would be much appreciated,
    Regards James

    Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
    I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
    Both Sylenth and Vanguard are 32bit plugins...
    ...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

  • What audio interface works best with Audition cs6

    what audio interface works best with Audition cs6

    It depends on how much you want to spend and how many channels you want to record/playback at once. So any decent (normally) external audio interface should do provided it also has robust ASIO drivers for your operating system. Don't go  for a gamer's interface though as they are not optimised for audio recording.

  • Which wireless router works best with Apple products?

    Which wireless router works best with Apple products?

    I cannot comment of Airport products, as I have none.  Nor would I suppose to argue with Kappy or Ralph.
    But in a pinch a LinkSys E2500 will work, as it does for me.

  • Which bluetooth clicker works best with an iPad?  I'm looking at a Targus AMP11US.

    Which bluetooth clicker works best with an iPad?  I'm looking at a targus amp11us.

    This sounds like a price match question. Without knowing all the details, it sounds like a yes for the Westinghouse, but I would encourage you to read the price match policy link here:
    http://www.bestbuy.com/site/Help-Topics/Bestbuy.com-Price-Match-Guarantee/pcmcat204400050011.c?id=pc...
    If all you care about is 1080p definition and an HDMI input at a $300 price point then this tv should suit your needs. (As a bonus it has 120Hz refresh for smoother action scenes.)http://www.bestbuy.com/site/Westinghouse+-+40%26%2334%3B+Class+-+LCD+-+1080p+-+120Hz+-+HDTV/5772998....
    Although I do work for the Best Buy, all comments and opinions are my own.

  • Which camera will work best with the MAC? NIKON or Canon

    Contemplating on buy a camera and a MAC, but need to know which camera will work best with a MAC, Nikon or Canon? Any info is appreciated

    Both will work very well. You might not even need to install the software that comes with them because they'll probably work fine with iPhoto etc. Before you buy a camera, check this list of cameras supported by OS X:
    http://support.apple.com/kb/HT3825
    Just about all Nikon and Canon cameras are on that list. If a camera is so new it is not yet on that list, it will be in the next update, probably.
    That list is for raw format compatibility. If your camera also shoots JPEG, it will work with a Mac even if it's not on that list. If a camera doesn't work by plugging in a cable, take the card out and put it in an ordinary USB card reader and the Mac will read it.
    Nikon has a slight advantage in that it supports a mode that lets the Mac mount a camera like a disk on the desktop. Canons don't mount on the desktop, but it's not really a disadvantage, because Canons still work great with Apple iPhoto, Apple Aperture, Apple Image Capture, and Adobe apps, and all of those are more efficient ways of transferring photos than dragging them out manually.

  • Hearing conflicting reports. What camcorders work best with macbook pro  and imovie

    I am looking to purchase a new HD Camcorder, but Im told some of them dont work well with macbook pro and Imovie.
    Im in the process of buying a new iMac and want to make sure I will be able to load the movies direrct to imovie.
    Thanks.

    This forum is for mobile iMovie (iPads & iPhones).
    you may need the iMovie Mac forum:
    https://discussions.apple.com/community/ilife/imovie

  • Which CD Authoring software works well with Logic Pro X ?

    Hello,
    I've been using Logic Studio (Logic Pro 9) and know that Waveburner will no longer work if I update to Logic Pro X. So which CD Authoring software works well as an alternative to Waveburner ?
    Thanks,
    Matrose

    Waveburner is a standalone app. If you have it installed and working now it will continue to work if you buy and install logic x, Waveburner will not be affected. Logic 9.1.8 will also happily sit next to logic x on your system.

  • Which Mac Pro System works best with Premiere Pro CC?

    I am looking to upgrade my 12 core tower to the newer Mac Pro. I am wondering if anyone out there has suggestion as to what makes the most sense financially in terms of which  flavor of Mac Pro to get? For example, Is there a significant speed increase between the 8 core vs 12 core, and the D500 Vs the D700 Video Cards ? And how much RAM ? Normally the temptation is to go out and get the maxed out system, but reading though the forums with the various issues people are having with performance on the newer Mac Pro's and Premiere, would be great to know how it stacks up in the real world.
    Appreciate any input in this regard.
    Cheers
    Chris

    Gary Baker wrote:
    I thought the only graphic card options on the new Mac Pro are all AMD cards, is that not correct? You can use the Quadro?
    MtD
    Yes, thanks I forgot about that. I was just going by what I have, which is an older model so I can apparently just replace it with a newer Quadro.
    I'm no apple hardware expert and I'm not sure how the ports are setup. Apple's official support site only lists the AMD cards Chris mentioned for their most recent model, but that's also listed as late 2013 which doesn't seem right either. (or is it?) Note that they also list my mid-2010 model as only supporting ATI Radeon HD 577 and 5870 but I've been running a Quadro FX4800 in it with good results for several years, so I know that part's not right. So I'm not sure I'd take that site entirely literally, but of course you would not want to risk getting the wrong card. You should probably enlist the help of apple support (and/or forums) to get more details and assurance before purchasing, but bottom line is you'll want something with plenty of RAM (~ 4 GB or higher if possible) which will also be compatible with CUDA and or OPenCL playback in prpro.

  • M-Audio Fast Track USB interface not compatible with Logic Pro X and Yosemite

    Hello All!
    I've been trying to simply record some guitar and vocal tracks onto the latest version of Logic Pro X. It worked before I downloaded the update of Yosemite, however now, I can't find a solution to my problem. I've tried everything! Installed new drivers onto the M-Audio and even tried to search for a later update of Yosemite. I have read a few things online about how Yosemite doesn't accept 3rd party drivers. So any USB plugged in to the macbook/mac that isn't mac based it doesn't accept.
    Please can someone help me solve his issue!
    Thankyou!
    Felix

    I know many, many of us who are running things just fine.
    I have to be really honest with you Ben and say... Where are you getting that idea from because it simply isn't so.....
    I have a quite large client list of Logic users from all over the world... and of those that have attempted to use Logic Pro X and Yosemite together... over 80% have had to revert back to a previous configuration because of performance and/or stability related issues...
    I personally, have on test here at the studios...  7 different Macs  ranging from 2010 Mac Mini i7 Servers to 2011 32GB 3.4Ghz iMacs.. to a maxed out 2013 i7 MBP to a top of the line 2014 Mac Pro and all have demonstrated issues regarding performance and stability with LPX and 10.10.x using a variety of different Audio/Midi interfaces, all of which have supposedly 10.10 compatible drivers... and all of which have no such issues running LPX under Mavericks...
    Just a quick scan across the various forums.. indicates that very few people are successfully running LPX under Yosemite without performance problems.... so that's why I am asking where you are seeing 'many many people" because I am just not seeing that myself...
    Cheers..
    Nigel

  • Which audio interfaces work well with CoreAudio?

    A number of older USB and Firewire audio interfaces do not appear to work properly with Tiger's CoreAudio, which promises major advantages in very low latency recording. Without a proper CoreAudio driver, audio can be reduced to mostly noise with just a trace of audio remaining.
    This information is difficult to find until you actually try to use a device and find that it doesn't work. Several devices I tried out last summer right after Tiger was released did not work, though they promised fixes, but I don't want to have to pay more restocking fees for devices that don't work
    Could someone post a list (or a link to a list) of devices that DO work? Thanks!

    Hi there,
    don't buy M-Audio interfaces! I had USB and FireWire audio interfaces from them, their hardware is ok, but the software (drivers) suck! I had extremely bad latency problems. I even started a thread about it a while ago. Now I use an EDIROL FA-66 FireWire audio interface. It's a little more expensive than the M-Audio, but it works and it does NOT need any drivers because it's fully Core Audio compatible! Works good for me. I've heard similar good opinions on the Presonus FW interfaces. Hope that helps!
    Björn

Maybe you are looking for

  • File to IDoc scenario in SRM

    Hello All, I am executing a scenario involving File to IDoc using an XSLT interface mapping. I am getting an error with error text "Tag ORDERHEADER found instead of tag IDOC BEGIN" Here is the error message: <?xml version="1.0" encoding="UTF-8" stand

  • Photoshop Bridge always crashes during a copy process.

    While moving a folder with Photoshop Bridge the application crashed and the folder has disappeared on my disk. Why dose Photoshop Bridge always stalls while moving and copying files or folders? What's the background and the solution to prevent this?

  • Publishing w/ Random Questions

    Hi, I am using random questions in one of my programs and about to send it off to the client. This client has Captivate and would like for me to send the CP files. My question is, if I send the CP file for the program, will the random questions in th

  • Native webservice access results in error:  HTTP 401 - Unauthorized

    I'm trying to use the native webservice functionallity of the 11g database (11.1.0. 6.0). According to some examples and the XML DB Developer's guide I have performed the following steps: 1: Configuring Web Services for Oracle XML DB 2: Enabling Web

  • Sequence  of process in MM Module

    Hi , CAN ANYONE TELL ME THE BRIEF PROCESS OF MM MODULE. I WOULD LIKE TO KNOW THE ORDER OF THE PROCESS LIKE PURCHASE REQ     ME51n PURCHASE ORDER   me21n AND I DON'T KNOW WHAT WOULD BE NEXT... Please let me know the transaction codes too THANKS DEEPTH