Which display settings for using projector

Hi Everybody,
I am using a projector to show a QT movie that is widescreen.
How do I determine which display setting to use to maintain the wideness if possible. There are so many...
THe screen is really more of a 4:3 screen. Tallish and vertical.
Thanks,
Al

I use the 16:10 and the 1440 x 900 setting.
Wonderful to look at... except for some of the creepy looking bad guys.

Similar Messages

Has the underscan feature been removed from the display settings for a projector in 10.8.2 for any reason or is this an oversight

Hi
Does anyone know if there is another way to find the underscan feature in display settings for Mac OSX 10.8.2 other than through the display settings. We set up our ceiling mounted prjectors at the start of September when we moved into our new school building at a significant cost. The projectors linked to the teacher's Imac projected onto the interactive whiteboards at the front of the classroom perfectly on 10.8.1. We recently updated to 10.8.2 and now the projected image no longer fits on to the boards and is about 2 feet higher up to the wall. The underscan feature is not available to drop this any ideas.
Moving projectors is not an option due to the cost of bringing in the contractor to extend the ceiling mounts.
thanks
Marcus

Clemens
We have an SR raised which is now with development, but so far we have not been able to pin down what is causing this.
Basically we see entries end up on the recovery queue with nothing written in any logs, even if we increase the level of logging to debug.
This does not happen under load, the exact opposite. If nothing is going on and then we get 5-10 processes start, we see about 1% end on the queue. I pushed 500,000 messages through it last weekend and nothing ended up on the queue, yet a run on Monday of just 100 caused 2 entries on the queue with no explaination.
I have tried everything I can think of, but so far have not been able to re-create the condition at will, it is completely non-deterministic. It also happens on all 5 of our rigs, so it is not machine specific.
I have tuned the BPEL engine and it easily copes with our throughput. We are running with a 10g dehydration store, either single instance or active-passive depending on environment, but I do not think this is going to be causing an issue.
We have about 20 async processes and sub-processes and the problem can occur at any point, although mostly on Invoke and Callback. Each process contains a mixture of async (to BPEL), sync (to External) and a reasonably number of database adapters in each process.
It is not the fact it is placing the entry on the queue that is my issue, it is the fact we have no idea WHY it has ended there as there are no log entries.
Any ideas what else I can try?
Pete

VmWare Display settings for guest OS Win7 Pro and others not saving

Mid-2014 MBP 15" with Retina, Intel iris Pro, 16GB, 512SSD. Running vmWare 7.1.2 on Yosemite 10.1.2:
- Win7 Pro VM setup with 8GB, 2 'cores', 128GB SSD.
- the Display settings for the Win7 Pro guest won't persist when switching to and from Mac desktop
- Doesn't matter if Full Screen or in Window, it defaults to 1140 x 900 or something like that, and will not keep settings made after Full Screen is selected
- Having done some research before coming here: I have uninstalled and re-installed vmTools. I have tried it with 'Use Full Retina Display' setting in vmWare guest settings, doesn't make a difference other than the default size is either the maximum Retina resolution for the Win7 Pro desktop or the 1440x900 default when the 'Use Retina..' setting is set.
- Apparently this is an Apple bug with Retina MBP and not vmWare, according to vmWare. ;}
Thought, suggestions, other?
Thanks folks!
-=-Dennis

Now having worked with VMware support. Here's the fix for anyone experiencing this problem on a rMBP with Fusion 7.x and running Win7Pro or others as guests, that are not retaining the display settings when either rebooting the guest, pausing the guest or switching between the Mac desktop and the GuestOS desktop.
1. Find a file named WMwareResolutionSet it can be located under ProgramFiles or ProgramFile(x86)-->VMware-->VMware Tools-->
2. Move, do not copy, this file out of this directory, onto your Desktop
3. Restart the Guest
4. Whatever resolution settings you have set, should now be retained
This assumes you have already UN-checked 'Use Full Resolution..' Retina display checkbox in VMware Settings-->Display.

Which project settings for project for Canon Powershot Video Editing?

Which project settings for project for Canon Powershot Video Editing?
I want to edit video taken with a Canon Powershot SD 550 taken in NTSC 640 x 480. When I start a new project, which project settings should I be using? Also when exporting the project to view on a computer should I stick with the AVI or will MPEG or another universal format give me better end quality?

Hunt,
This user has two thread topics here that are identical to ones at the forum which I frequent. Early on I downloaded video from the Canon Powershot that he says he is using for the basis of my comments. So, I have put that video through gspot myself. Since the user is going between the two forums (mostly here), I did not want anything lost in the back and forth. The goal is to help attainment of the goal. That is why I am including comments at both locations:
At The Other Forum
Project Settings Thread
http://www.elementsvillage.com/forums/showthread.php?t=52299
Rotation Thread
http://www.elementsvillage.com/forums/showthread.php?t=52298
The user has gotten back to me on the video rotation issue, thanking me, but telling me that another workflow was identified...and, as I note, generously shared with both sites. I am in the process of personally checking out what he said worked for him in that regard. However, the user has not gotten back to me on the topic of project settings.
So to expedite matters, when you get a chance, could you please check out my comments in that thread? I would be interested in your perspective on the matter and what I wrote.
Thanks.
ATR

Saving Settings for use with Export using Quicktime Conversion

Dear All,
Is it possible to save a set of settings for use with the Export using Quicktime Conversion feature? The reason I ask is that we have to export a quicktime of every tv commercial we make (using the same settings) and it would be great if "one click" could deliver the export settings we need.
All the best, Sean

Well, you can create a droplet from Compressor that would do what you'd like...
Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
Jerry

Settings for using BlackBerry world

What are settings for using BlackBerry world???
When I want open it I have this massage:"there was a connection problem.BlackBerry World mus close"
Help me,plz.

Hi Farid-11388
You can update to 10.2 through the BlackBerry Link
But it is recommended to check if your Operator officially released the 10.2
And so it must be an update.
Always remember before upgrading to backup with BlackBerry Link.
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Trouble with display settings for projector/Reactable

Hi,
I'm trying to install a musical hardware interface called the Reactable for use with my iMac, and I'm having trouble getting the correct display settings. It's designed to work with laptops and it works fine for the most part with my Apple Hackintosh, but I can't seem to get it working correctly with my iMac. The tech support from the Reactable company recommends that I use 1600x1200 resolution or 1024x768 (native) on the projector, but when I open my display settings I am not presented with either of those options. It only permits me to use 1024x768 and 1024x768 (stretched).
The only instance in which I can get the projection to cover the whole table is with 1024x768, but then the projection is too large. Do I need to change the scaling somehow? How do I do that?
Thanks,
Justin

1080p. If you have a Mac Mini with an HDMI connector, connect direct through there.
Otherwise you'll need to look at either: Which Macs don't have audio over mini-Displayport connectivity, need either an
Apogee DVI To HDMI Converter / SPDIF Optical Toslink+Coaxial Input Output if you have a mini-DVI or DVI (The left connector is DVI, and the right connector is mini-DVI) connector and it is Intel.
Kanex iAdapt Displayport adaptor if you have a mini-Displayport ( http://upload.wikimedia.org/wikipedia/commons/thumb/4/47/Mini_DisplayPort_on_App le_MacBook.jpg/300px-Mini_DisplayPort_on_Apple_MacBook.jpg
) connector.
Note, thunderbolt connectors look the same as mini-Displayport except they have the lightning icon symbol.
PowerPC Mac Minis, need a StarTech DVI2HDMIA connector together with an RCA minijack to red and white splitter cable.

How do you add additional resolution options in the display settings for the MacbookPro?

I am using a Dell external monitor with my 2013 MacBook Pro Retina 13 inch. The resolution is 1900x1200 which is not one of the display selections for an external monitor in the Macbook settings. How do I update the display settings to support this monitor?

Function Modules
http://www.erpgenie.com/abap/functions.htm
http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
http://www.erpgenie.com/abap/index.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

Correct display settings for hp mini 110

can someone please tell me what the correct display settings are for the hp mini 110? thank you!

@ebernier ,
Hello and thank you for posting on the HP support forums. Please check out the following link it will help you when posting so that we can help you better.
Advice for asking the "Very Best Question"
As for correct display setting. What ever setting you find most comfortable is the best.
Please post back if you have any more questions. As well include your full model and product number.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Lazy Nezumi - settings for use with CC

I am finding it hard to find my way round way this software - the incomprehensible (to me) manual doesn't help - and I'd be grateful for a steer on what are good default settings for smoothing curves in freehand drawing. None of the settings seem to help or have a simple and useful effect for freehand work.
Can I assume that it only works with the brush tool and not with other tools like the Art History Brush?
I know Trevor D has mentioned this software a couple of times.
Thanks.

David, you had me wondering there. I don't think I have ever used the Art History brush. I did try though, and initially thought LNP did not work with that tool, but with high settings I could see that it does.
For smooth lines use the Massive Smooth preset with mode set to Moving Average. The default values are good for the Brush tool, but seem to work better with much higher 'Amount' setting for the Art History brush. But I have no experience with the Art history brush, and don't even have a clear idea how it works.
Lazy Mouse with the Pulled string mode, are used for smooth lines with abrupt changes of direction. You have to stop and move the cursor back a touch to take the tension out of the pulled string. Then move in the new direction and when the pulled string becomes taut the line will follow the cursor again.
Actually, the animated gifs on the site explain it better than my words
Pulled String:
Moving Average
Moving Average + Catch Up
I don't think that Guilaume ever sleeps. He has never taken more than 30 minutes to reply to an email, even on Christmas day! He is super helpful, and tends to respond immediately if you use the LNP Chat facility.
If you check out the Feedback page, you'll find lots of LNP users that do 'similar' work to you, although I have to say none that were quite like your beautiful painterly type artworks. You'll possibly recognize some of the names, and maybe swap some ideas with them. It's quite a little community, but there isn't a forum unfortunately.
I am not sure how relevant they will be to your work, but do check out the Constraint presets. For line drawing I find they are really useful.
Lazy Nezumi Pro - User Testimonials
Having spoken nicely about your work David, it's only fair we let other users take a look
New Artwork photoart,digital painting,drawing,sketches,
But bottom line is to not hesitate to contact Guilaume if you need help. He will definitely get back to you.
[email protected]

What are the settings for using an ATT mail account with iPad mail?

Dear Folks,
I just switched from earthlink to att, and I can't seem to get Mail configured quite right. I can send email just fine, via stmp.att.yahoo.com. But when I try to receive email it tells me it can't connect to pop.att.yahoo.com.
Since I can send OK, I figure my email address and password have to be good, so most likely I'm using the wrong POP server address.
Would someone like to give me a clue?
Thanks!
pax / Ctein

Am having similar problems. Outgoing settings work on our iBook, using home wireless net, but the same settings do not work on our iPad. Why is this, and can anything be done to fix this?
I am connected to our AT&T DSL modem via Ethernet cable. the modem is the wireless type, also.
INCOMING: pop.att.yahoo.com
USERNAME: [name]@sbcglobal.net
PASSWORD:*************
PORT: 995 w/Use SSL checked.
OUTGOING: smtp.att.yahoo.com
USERNAME: [name]@sbcglobal.net
PASSWORD:*************
PORT: 465 w/Use SSL checked
I entered this info into the iPad before syncing it and have tried many permutations to no avail. Talking to AT&T did no good as they suggested coming out and changing settings in the DSL modem, which would have precluded using it normally, and would have made it impossible to connect elsewhere with the iPad. D'oh!
Apple doesn't have an answer as we spent a couple of hours with one of their "GENIUSES" and after asking his supervisor about it we left with only the mobileme capability. We can access the internet tho, just not use our own email address.
All I can say is HELP--HELP--HELP--HELP--HELP--HELP--HELP--HELP--HELP--HELP-!!
P.S. A family member who just left Apple told me that the next OS is going to be called "LION, OS7!"

What are the best Color "Display Settings" for both my Macbook Pro Retina and Thunderbolt Display??

I have recently purchased a Thunderbolt Display for my MBPr (early 2013) and was wondering what were the best settings for both to obtain an equal color and graphic appearance. I want to have them identical for working on graphics and illustrations.
Thanks

I have the same laptop. There's nothing you really need to do to optimise the system. Perhaps just install the cuda drivers.
It runs premiere like a dream.

JVC GZ-HD7U MPEG Streamclip export settings for use with FCP

There are a number of compression options in the free MPEG Streamclip 1.9.2 and it's unclear what's best or how I would figure that info out. My guess is Apple HDV 1080i50, Apple HDV 1080i60, Apple DVCPRO HD 1080i50, or Apple DVCPRO HD 1080i60. The default setting was Apple Motion JPEG A, but this produced a huge file and doesn't seem right anyway. I think the desired frame size is 1920 x 1080, but I'm uncertain if I need to end up with an interlaced or progressive .mov file. My selectable options for progressive/interlaced are: "Interlaced Scaling," "Reinterlace Chroma," and "Deinterlace Video." Selecting "Deinterlace Video" excludes use of the other two options.
These clips will eventually be edited in FCP and I'm guessing that the appropriate settings will match whatever is selected at the export stage.
I'm using the JVC Everio GZ-DH7U HD Hard disk camcorder...I'm not sure if JVC uses the same setting across the board for it's HD cameras or maybe just the Everio cameras are similarly designed??
Thanks to all!!

the output should match the source file, generally speaking. So if you camera is making HD files then using a HD sized coded would suffice.
HDV (IIRC) is 1440x1080. I often find that using the default settings for a particular file type in Streamclip often work quite well.
As a test, take a small file. if it works, great batch process away, if not, tweak it and then try the same small file until you get a desirable result. Rinse and repeat.

Server settings for using other pop3/imap applications?

trying to set up mac mail on my motorola q, and can't quie get the mail to work. What should the setting be:
For incoming and outgoing server names
For account name (should it include @and after)
SSL?
Thanks

Hello guys,
I have found a solution: In ZendFramework/library/Zend/Amf/Response/Http.php linenumber 59:
$ssl = $_SERVER['HTTPS']; is given an error.
I did this:
$_SERVER['HTTPS'] = 'off';
$ssl = $_SERVER['HTTPS'];
So add this line....
And it works...
Hope it works for you too.
Ooh, and don't forget to follow the instruction of TweenOut.
Erik.
Van: tweenOut [email protected]
Verzonden: dinsdag 20 december 2011 18:42
Aan: EGJ Steens
Onderwerp: Server settings for remote Server in Flash Builder 4.5 Premium
Re: Server settings for remote Server in Flash Builder 4.5 Premium
created by tweenOut <http://forums.adobe.com/people/tweenOut> in Using Flash Builder - View the full discussion <http://forums.adobe.com/message/4095833#4095833

Restore display settings for MBP- where is preference?

I have a MBP and was playing around with the display settings and messed it up and now want to restore it. I have Time Machine set up- where do I go to find the setting and restore it to what it was yesterday? What folder is it in? Thanks (again), Judy

Got it restored to what it was...... Judy

Which display settings for using projector

Similar Messages

Maybe you are looking for