Which dll's are

required to make an installable aplication with component works?, i trying to make an aplication that can run in any PC with or without CW, but every time the i make the executable file, the aplication put a message the need an dll, i'm going for 7 intent.

required to make an installable aplication with component works?, i trying to make an aplication that can run in any PC with or without CW, but every time the i make the executable file, the aplication put a message the need an dll, i'm going for 7 intent.KB article 25TGORXL "Distributing ComponentWorks Applications and Environment-Specific Concerns with ComponentWorks" has links to several articles that may help:
http://digital.ni.com/public.nsf/3efedde4322fef198​62567740067f3cc/4e4a62b3c9a3cda1862569e40082b6ee?O​penDocument

Similar Messages

  • What other SAP DLL's are needed to use SDK DI?

    Hello,
    Would anyone know which SAP DLL's are needed in order to have a DI SDK application working (in VB.net) uner Windows XP SP3?
    Basically, the DLL's in the DIAPI folder are all registered but I get the following error when I run my application:-
    "Error retrieving the COM class factory for component with CLSID {632F4591-AA62-4219-8FB6-22BCF5F69469} failed due to the following error: 80040154."
    Are there SAP dll's that need to be present on the Windows XP pc for sapbobscom.dll to work?
    Thanks in advance
    Ed

    Hello Jane,
    To answer your question the issue is happening on WIndows XP 32 bit, thus it is not related to the fact I may be running a 32 bit code on 64 bit architectures.
    If you see my other post, the issue goes away if I install the SAP Client, which leads me to conclude that the SDK DI cannot work by itself, without the other DLL's present in SAP.
    I am now looking for confirmation from the SAP Developers that it is true that the SAP Client needs to be installed before the SDK DI works.
    Thanks for your precious feedback.
    Ed

  • Feature Request: Javascript libraries of which the versions are in better control

    This essentially aimed at the developpers:
    Anyone who browsed with noscript, or used ghostery, knows the web is full of javascript. These are often downloaded from separate websites.(for no apparent reason, they can easily be hosted locally) This is a bad thing:
    * Accessing these gives the the http-referrer(presumably) so it indicates someone where you are browsing.(though other resources do this too)
    * Javascript is nowhere as secure as html in terms of potential weaknesses.
    * Javascript is -plainly- designed to have access to the web page, or the current url.
    * These are often accessed via http, it could be spoofed to return a different
    * The servers it came from can outright change it at any point, and the user has little control, even if the javascript source code unobfuscated, there is no time to do so as it is in the hands of the users immediately.
    For this reason i suggest implementing a library(package system) for these javascripts, of which the packages are signed, and the user controls when they are updated. It should be easy to use and add these libraries for developpers, preferably, additional people can attest they read the source code and approve of it.
    Well, to be honest, i cannot really suggest entirely how to do it, i just dont know enough. And it has to be entirely transparent to users, at least. Some kind system that detects that people have checked the source code, and/or a default time duration.(depending on the package)
    Of course this has to be coordinated with other browsers/standards creation. This sounds hard and it seems like you're already doing a really good job at it.(And at developping FF in general)

    Hi Jasper, to give a specific example, if Firefox were to find a site using a particular version of jQuery then it would instead use a pre-validated copy of that library from a trusted site or from the Firefox program folder?
    I think this would be a complex project, but perhaps an extension developer would consider building it, at least to demonstrate how it could be done?
    This forum is like an emergency room so your suggest may get lost here. You can submit a version to the Input site (Help > Submit Feedback connects you) or on a Mozilla mailing list. Not sure which one would be right for this idea, but you could take a look here: [https://lists.mozilla.org/].

  • What is process through which schedule lines are cofirmed in Sales Order

    What is the process through which schedule lines are cofirmed in Sales Order

    Hi,
    Schedule lines get confirmed on the basis of backward or forward scheduling carried out by system based on Material Availability date.
    Regards
    SD
    Message was edited by:
            Samier Danish

  • I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

    I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

    In landscape mode, the mailbox list is automatically displayed (in portrait mode, you will need to tap the button to,show it).
    To edit the list, tap edit as shown below.

  • How to find out Which SAP programs are affecting Which Z programs?

    Do we have a program/tool that can tell us the following:
    How to find out Which SAP programs are affecting Which Z programs in the entire development server?  
    We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level. 
    We need are looking for something a little larger u2013
    thanks in advance
    Vishnu

    Do we have a program/tool that can tell us the following:
    How to find out Which SAP programs are affecting Which Z programs in the entire development server?  
    We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level. 
    We need are looking for something a little larger u2013
    thanks in advance
    Vishnu

  • What are the settings in mail to see photos that were sent- then email recepient replies back w/ comments but there are no photos to know which one they are commenting about.  how do i see what was sent when they reply?   thanks for your help

    anyone know how to get mail to show the photos back to you?
    ex:  send pictures to friends, they reply w/ comments, but have no idea which pictures they are commenting on because they do not sho up in a reply.
    thanks for your help

    Did you ever get a reply to this.  I have the same problem.  I have the same problem when even when I reply to an email... no photo shows up in my new reply message.  The only way I have figured out is to use the "forward" option.
    But this still does not solve the problem when people email me back... I have no idea what photo they are speaking of.  Instead of a photo... there is a <photo name of some sort>.
    Let me know if you ever hear on this one.
    Many thanks.

  • I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    Hi Ali,
    I'll just add this reference to the good tips from my friend Manish (+5)
    Support for the 7800 series in CUCM 8.6.2 was first added with this
    Device Pack;
    Cisco Unified Communications Manager
    Device Package 8.6(2)(24104-1)Release Notes
    Cisco Unified Communications Manager Device Package Release 8.6(2)
    adds support for the Cisco IP Phones
    7821, 7841, and 7861 running SIP firmware release 10.1(1).
    The steps are in this doc
    http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
    You might as well install the latest 8.6.2 Device pack
    cmterm-devicepack8.6.2.24112-1.cop.sgn
    Cheers!
    Rob
    "Seek it out and ye shall find  " 
    - OneRepublic

  • My library of 800  songs has been replaced by 48 older items which I believe are off an older device (old nano belonging to another family member). How do I get my songs back?

    My library of 800  songs has been replaced by 48 older items which I believe are off an older device (old nano belonging to another family member). How do I get my songs back?

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • How to find which data elements are used in ABAP program ?

    I wish to find out which data elements are used in some programs .
    Is there any DD table which stores this information ?
    I know we can go to program and look in fields, but do SAP stores this information somewhere ?

    Dear Kaushal,
    Please check the table <b>TRDIR</b>.
    Regards,
    Abir
    Don't forget to award points *

  • I'm new to apple. my app button has a number 2 on it meaning 2 downloads to action i presume but when i get to the store there is no indication which two these are. Any help please ?

    Which apps do i download when a number appears on the app button but there is no indication in the store which 2 these are ?

    Click on the Updates icon in the App Store's toolbar. If there are upgrades they will be listed there.

  • Which extraction methods are used for extracting AR , AP, GL , cost centre

    which extraction methods are used for extracting AR , AP, GL, cost centre  account   data from R/3 system.
    please let me know what type of extraction we use...generic or FISL.... OR COPA
    ON WHAT SCENARIOS WE USE  THIS EXTRACTIONS..
    if any have documents on it please  email...please  send  an  email    documents ..
    to  [email protected]  
    iam bit confused with sap help...
    will reward full points
    please reply

    Hi,
    For general ledger :
    http://help.sap.com/saphelp_nw70/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
    This is the best how-to guide on AP,AR,GL and TAX.
    http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
    Hope it helps.
    Regards,
    Srikanth.

  • How can I find out which vi's are dynamic?

    I am working on a project made up of hundreds of VIs. I have to make an standalone executable version of it. I was not the original developer. Is there a way I can scan the vi's to find out which of them are dynamic? What should I be looking for as a telltale sign of being dynamic (What makes a vi dynamic?)
    Are all vit's dynamic? (I was told by my senior developer to include all vit's in the dynamic section of the build dialog box.)
    Message Edited by rashid19672008 on 02-27-2008 03:25 PM

    This is not a property of a VI, but rather a way of using it. You can call any VI either way (or both ways), so whether a VI is called dynamically depends on your code.
    One way of finding whether a VI does not have static calls is to open all the VIs in the hierarchy at the same time and then go over each of them in a loop, open a reference to it and check its "Callers" property. If the array is empty, it means that this VI is not called by any other VI currently in memory and might be called dynamically. It might also mean that it is an old VI and is not used any more.
    Another option is to create a copy of the hierarchy using File>>Save With Options. LabVIEW will only copy the VIs which are called statically and you can then compare the hierarchies for files which are only found in the original.
    Try to take over the world!

  • Which two statements are true about WHERE and HAVING clause ?

    Which two statements are true about WHERE and HAVING clause ?
    1. WHERE clause can be used to restict rows only
    2.HAVING clause can be used to restrict groups only
    3.HAVING clause can be used to restrict groups and rows
    Plz help me in dis ques...which two will be correct...i think its 1 and 2...but not sure.

    863180 wrote:
    Plz help me in dis ques...which two will be correct...i think its 1 and 2...but not sure.If you are not sure then you do not fully understand HAVING.
    SY.

  • Finding which OWA packages are available for use in the schema/database

    Hello,
    When I type in the following in SQLplus:
    select owa_util.get_version from dual
    It returns with
    GET_VERSION
    9.0.4.0.1
    Is it possible to write a query that tells me which OWA packages are included in version 9.0.4.0.1
    I’m interested in the OWA_SEC package
    Thank You
    Douglas

    THANK YOU….
    I have another question:
    I have successfully compiled the following package:
    (It is based on a package in the text “Oracle Web Application Programming for PL/SQL Developers” by Susan Boardman etc… page 687-688
    The SPEC and BODY code is as follows:
    CREATE OR REPLACE PACKAGE AUTHEN_TEST IS
    FUNCTION AUTHORIZE RETURN BOOLEAN;
    PROCEDURE HELLO_WORLD;
    END;
    CREATE OR REPLACE PACKAGE BODY AUTHEN_TEST IS
    FUNCTION AUTHORIZE RETURN BOOLEAN IS
    v_user VARCHAR2(10);
    v_password VARCHAR2(10);
    BEGIN
    owa_sec.set_protection_realm('The Realm of Testing');
    v_user := UPPER(owa_sec.get_user_id);
    v_password := UPPER(owa_sec.get_password);
    IF v_user = 'PREN' AND v_password = 'HALL' THEN
    RETURN TRUE;
    ELSE
    RETURN FALSE;
    END IF;
    END AUTHORIZE;
    PROCEDURE HELLO_WORLD IS
    v_status BOOLEAN;
    BEGIN
    htp.p('TESTING');
    v_status := authorize;
    IF v_status = TRUE THEN
    htp.p('WENT TO PASSWORD SECTION');
    ELSE
    htp.p('DID NOT GO TO PASSWORD SECTION');
    END IF;
    END HELLO_WORLD;
    END AUTHEN_TEST;
    As I said the code compiles!!
    However what I want it to do is successfully run the following code from the package:
    owa_sec.set_protection_realm('The Realm of Testing');
    v_user := UPPER(owa_sec.get_user_id);
    v_password := UPPER(owa_sec.get_password);
    and have the user be asked for a password and login
    Currently when I run it the browser displays:
    TESTING DID NOT GO TO PASSWORD SECTION
    Any advice is appreciated
    Thank You
    Douglas

Maybe you are looking for