Which drive is for which?

I'm new to FCP, want to head off right. I've got a Final Cut Pro Documents folder on a 2nd drive set up as the scratch disk. My boot drive has the FCP Projects folder. Which one should my original .mov files live in, as well as the compressed
versions I bring into FCP...as well as the media files I eventually create?
Of course, I understand EVERYTHING there is to know other than that.
Thanks very much.

ALL media of all sorts should reside an any drive other than your boot drive.

Similar Messages

Which HDD interface for which drives?

Hello,
I have read Harm's and others' excellent advice on drive configuration, but am not sure about which drives to put on which interfaces. Assuming an X99 motherboard has 2 M.2 PCIE sockets, 1 SATA Express port, 1 SATA Express controller with 1 port, 8 SATA 6 GBs, and possibly a PCT RAID card. Which of these connectors would you use for which drive, and why? (I suppose another way to ask this might be which hdd uses benefit the most from increased speed--OS, application, pagefile, media, etc?)
Also, closely related, one thing I cannot discern from what I have read so far is where lies the point of diminishing returns. For a system used for a mix of Premiere/Photoshop/AE, using as HaswellE, 32Gb, and say a 980, how many drives and how much drive throughput is required to prevent HDD from being a significant bottleneck?
Thanks for any thoughts!!

Normally PCI-E slots are a premium for editing systems and config options so I don't recommend wasting those on NVMe drives or adapter cards. I would suggest the Sata ports for storage usage and a SSD OS drive for sure. A SSD cache drive is a good idea as well provided it's big enough. Normally you want a 256GB Cache drive if so.
Eric
ADK

Which power supply for which switch

have 2 different switchs with 2 different power supplys.
EZXS88W v3 andEZXS16W v2.1 - i have a 9v and a 12v linksys power brick both @1000mha. which one goes to which?
i also have a BEFSR81 v3 - with no powersupply. can anyone linkme to a GOOD seller on ebay or amazon for one please?

EZXS88W power specs is 5V 6A, 3 PRONG and 100~240V.
EZXS16W v2.1 Power specs is 12V 1000MA, BIG BARREL and 120VAC.
BEFSR81 v3 Power specs is 12VDC 1000ma, BIG BARREL and 120VAC.
This are the specs for the power adapter for this devices. You will find this power adapter on any of the stores, or else you get a Universal Power Adapter which is compatible with all the Router and the Electronic Device. Just you need to adjust the power as per your Routers power specs.

Which drive bay for an SSD as system drive?

Hey people. I just bought a 2009 Mac Pro 4,1 with 8 cores at 2.93 GHz. I also bought a 120GB SSD from OWC to use as the system drive. My question is: does it matter which bay I use for the SSD? I'd like to install the SSD in bay 1, because bay 1 seems more appropriate for a system drive, but I don't really know if this matters. Is bay 1 faster or have some kind of priority access to the CPUs? This machine came with a 2TB HDD in each of bays 1 and2. They are configured as a Mirrored RAID Set, but I think I will set them up as 4 TB regular storage. Thanks much for any helpful replies.
Monte

Or do I have less efficient air flow?
Less efficient.
It is obscure, and does not make a LOT of difference, but now some heated air can leak back through that vacant 1/2 inch space and enter the front of the main intake fan in place of a little bit of cooler outside air. With a full 1 inch drive there, the potential leak is plugged by the standard-height 3.5 inch drive.

Which consistent get for which block

Hello Experts,
I have conducted an experiment at SQL*PLUS. I created a small table with 100 rows and then create an ununique index on the id column.
SQL> alter system flush shared_pool;
Sistem dei■tirildi.
SQL> create table small as
2 select rownum id, 'BOWIE' name from dual connect by level <= 100;
SQL> create index small_id_i on small(id);
SQL> alter session set tracefile_identifier = '100114_deneme2';
Oturum dei■tirildi.
SQL> exec dbms_monitor.session_trace_enable(waits => true);
PL/SQL yordam² ba■ar²yla tamamland².
SQL> select * from small where id = 44;
ID NAME
44 BOWIE
SQL> exec dbms_monitor.session_trace_disable;
PL/SQL yordam² ba■ar²yla tamamland².
After executed the above, I looked the trace file. The following excerpt was taken from end of the trace file.
=====================
PARSING IN CURSOR #4 len=210 dep=1 uid=0 oct=3 lid=0 tim=7391216619 hv=864012087 ad='7ff5f8385a8' sqlid='96g93hntrzjtr'
select /*+ rule */ bucket_cnt, row_cnt, cache_cnt, null_cnt, timestamp#, sample_size, minimum, maximum, distcnt, lowval, hival, density, col#, spare1, spare2, avgcln from hist_head$ where obj#=:1 and intcol#=:2
END OF STMT
EXEC #4:c=0,e=19,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=3,plh=2239883476,tim=7391216618
FETCH #4:c=0,e=10,p=0,cr=2,cu=0,mis=0,r=0,dep=1,og=3,plh=2239883476,tim=7391216713
CLOSE #4:c=0,e=2,dep=1,type=3,tim=7391216749
=====================
PARSING IN CURSOR #5 len=33 dep=0 uid=85 oct=3 lid=85 tim=7391217024 hv=1889534919 ad='7ff5f503f40' sqlid='c97q0gdsa00y7'
select * from small where id = 44
END OF STMT
PARSE #5:c=46800,e=121273,p=0,cr=52,cu=0,mis=1,r=0,dep=0,og=1,plh=1841720936,tim=7391217023
EXEC #5:c=0,e=17,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=1841720936,tim=7391217119
WAIT #5: nam='SQL*Net message to client' ela= 1 driver id=1111838976 #bytes=1 p3=0 obj#=-1 tim=7391217185
FETCH #5:c=0,e=21,p=0,cr=2,cu=0,mis=0,r=1,dep=0,og=1,plh=1841720936,tim=7391217243
WAIT #5: nam='SQL*Net message from client' ela= 304 driver id=1111838976 #bytes=1 p3=0 obj#=-1 tim=7391217590
FETCH #5:c=0,e=13,p=0,cr=1,cu=0,mis=0,r=0,dep=0,og=1,plh=1841720936,tim=7391217673
STAT #5 id=1 cnt=1 pid=0 pos=1 obj=76014 op='TABLE ACCESS BY INDEX ROWID SMALL (cr=3 pr=0 pw=0 time=0 us cost=2 size=20 card=1)'
STAT #5 id=2 cnt=1 pid=1 pos=1 obj=76015 op='INDEX RANGE SCAN SMALL_ID_I (cr=2 pr=0 pw=0 time=0 us cost=1 size=0 card=1)'
WAIT #5: nam='SQL*Net message to client' ela= 1 driver id=1111838976 #bytes=1 p3=0 obj#=-1 tim=7391217792
*** 2014-01-10 15:10:36.712
WAIT #5: nam='SQL*Net message from client' ela= 23061079 driver id=1111838976 #bytes=1 p3=0 obj#=-1 tim=7414278895
CLOSE #5:c=0,e=27,dep=0,type=0,tim=7414279115
=====================
PARSING IN CURSOR #1 len=48 dep=0 uid=85 oct=47 lid=85 tim=7414281226 hv=3585424577 ad='7ff5f6ea810' sqlid='fypj2tgavag61'
BEGIN dbms_monitor.session_trace_disable; END;
END OF STMT
PARSE #1:c=15600,e=2045,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,plh=0,tim=7414281224
EXEC #1:c=0,e=1052,p=0,cr=0,cu=0,mis=0,r=1,dep=0,og=1,plh=0,tim=7414282442
My question is; Although this is very small table, I created an index. As you can see there are 3 consistent gets arise (cr=3). There is no doubt that the first consistent get happen on leaf block and the other on the table block. However, Does the third consistent get happen on which block?
In my opinion, The last consistent get should be on table block. Becacuse, according to the following thread (https://community.oracle.com/message/10711767). As far as I know from Solomon, there is fetch and there is prefetch. SQL*PLUS is written in OCI and in OCI prefetch defaults to 1. So, if you issue a query on SQL*PLUS and if this query returns one or more rows the first fetch and the second fetch should be on the same table block.
Also, can't we say that the last cr happen on table block by looking explain plan? Because, as it can be seen, cr was icreamented when table access by index rowid small line.
STAT #5 id=1 cnt=1 pid=0 pos=1 obj=76014 op='TABLE ACCESS BY INDEX ROWID SMALL (cr=3 pr=0 pw=0 time=0 us cost=2 size=20 card=1)'
STAT #5 id=2 cnt=1 pid=1 pos=1 obj=76015 op='INDEX RANGE SCAN SMALL_ID_I (cr=2 pr=0 pw=0 time=0 us cost=1 size=0 card=1)'
My second question, What can we do in order to understand which consistent get happen on which block (file# block# etc.)? Can't we understand by looking the trace file?
My third question is, before issue the select query on table. I flushed the shared pool. Does it make the parse 52 cr (Because of recursive calls)???
PARSE #5:c=46800,e=121273,p=0,cr=52,cu=0,mis=1,r=0,dep=0,og=1,plh=1841720936,tim=7391217023
I also trace 10200 event, if you want I also can show 10200 trace file. I didn't show it because I don't know how to read 10200 trace event.
Thanks in advance.

For example following 10200 trace event arised by select * from small where id = 42;
*** 2014-01-10 14:56:58.492
*** SESSION ID:(135.468) 2014-01-10 14:56:58.492
*** CLIENT ID:() 2014-01-10 14:56:58.492
*** SERVICE NAME:(SYS$USERS) 2014-01-10 14:56:58.492
*** MODULE NAME:(SQL*Plus) 2014-01-10 14:56:58.492
*** ACTION NAME:() 2014-01-10 14:56:58.492
ktrget2(): started for block <0x0004 : 0x010006bb> objd: 0x000128ee
env: (scn: 0x0000.004d5549 xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 statement num=0 parent xid: xid: 0x0000.000.00000000 scn: 0x0000.00000000 97sch: scn: 0x0000.00000000 mascn: (scn: 0x0000.004d550c)
ktrexf(): returning 9 on: 0000000021DD1524 scn: 0xffff.ffffffff xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 scn: 0xffff.ffffffff sfl: 0
ktrgcm(): completed for block <0x0004 : 0x010006bb> objd: 0x000128ee
ktrget2(): completed for block <0x0004 : 0x010006bb> objd: 0x000128ee
ktrgtc2(): started for block <0x0004 : 0x010006c3> objd: 0x000128ef
env: (scn: 0x0000.004d5549 xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 statement num=0 parent xid: xid: 0x0000.000.00000000 scn: 0x0000.00000000 97sch: scn: 0x0000.00000000 mascn: (scn: 0x0000.004d550c)
ktrexc(): returning 8 on: 0000000021DD1524 scn: 0xffff.ffffffff xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 scn: 0xffff.ffffffff sfl: 0
ktrgtc2(): completed for block <0x0004 : 0x010006c3> objd: 0x000128ef
ktrgtc2(): started for block <0x0000 : 0x00400b49> objd: 0x000001aa
env: (scn: 0x0000.004d5549 xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 statement num=0 parent xid: xid: 0x0000.000.00000000 scn: 0x0000.00000000 96sch: scn: 0x0000.00000000 mascn: (scn: 0x0000.004d550c)
ktrexc(): returning 2 on: 0000000021DD1524 scn: 0xffff.ffffffff xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 scn: 0xffff.ffffffff sfl: 0
ktrgtc2(): completed for block <0x0000 : 0x00400b49> objd: 0x000001aa
ktrget2(): started for block <0x0000 : 0x00415c82> objd: 0x000001aa
env: (scn: 0x0000.004d5549 xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 statement num=0 parent xid: xid: 0x0000.000.00000000 scn: 0x0000.00000000 96sch: scn: 0x0000.00000000 mascn: (scn: 0x0000.004d550c)
ktrexf(): returning 9 on: 0000000021DD1524 scn: 0xffff.ffffffff xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 scn: 0xffff.ffffffff sfl: 0
ktrgcm(): completed for block <0x0000 : 0x00415c82> objd: 0x000001aa
ktrget2(): completed for block <0x0000 : 0x00415c82> objd: 0x000001aa
ktrgtc2(): started for block <0x0004 : 0x010006c3> objd: 0x000128ef
env: (scn: 0x0000.004d5549 xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 statement num=0 parent xid: xid: 0x0000.000.00000000 scn: 0x0000.00000000 97sch: scn: 0x0000.00000000 mascn: (scn: 0x0000.004d550c)
ktrexc(): returning 8 on: 0000000021DD1524 scn: 0xffff.ffffffff xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 scn: 0xffff.ffffffff sfl: 0
ktrgtc2(): completed for block <0x0004 : 0x010006c3> objd: 0x000128ef
ktrget2(): started for block <0x0004 : 0x010006bb> objd: 0x000128ee
env: (scn: 0x0000.004d5549 xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 statement num=0 parent xid: xid: 0x0000.000.00000000 scn: 0x0000.00000000 97sch: scn: 0x0000.00000000 mascn: (scn: 0x0000.004d550c)
ktrexf(): returning 9 on: 0000000021DD1524 scn: 0xffff.ffffffff xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 scn: 0xffff.ffffffff sfl: 0
ktrgcm(): completed for block <0x0004 : 0x010006bb> objd: 0x000128ee
ktrget2(): completed for block <0x0004 : 0x010006bb> objd: 0x000128ee
ktrget2(): started for block <0x0004 : 0x010006c3> objd: 0x000128ef
env: (scn: 0x0000.004d5549 xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 statement num=0 parent xid: xid: 0x0000.000.00000000 scn: 0x0000.00000000 96sch: scn: 0x0000.00000000 mascn: (scn: 0x0000.004d550c)
ktrexf(): returning 9 on: 0000000021DD1524 scn: 0xffff.ffffffff xid: 0x0000.000.00000000 uba: 0x00000000.0000.00 scn: 0xffff.ffffffff sfl: 0
ktrgcm(): completed for block <0x0004 : 0x010006c3> objd: 0x000128ef
ktrget2(): completed for block <0x0004 : 0x010006c3> objd: 0x000128ef

Which tools best for which tasks and project workflow planning?

I am just getting comfortable with the basics of several CS tools and often need to use more than one to build a final product. Since I don't have a long history with the tools I still struggle learning which tool to use for specific tasks and then how best to use the variety of created assets in the various programs.
Currently using CS4 After Effects, Flash, and Photoshop to create web flash swf files. Most books, forums, tutorials, etc. focus on a given tool and how to use its features. I have looked but not found books that take you through a project start to end that spans several tools and using the best parts of each to accomplish pieces of the finished project.
Also, I find getting assets from one tool to the next does not always work out so well. For example, a text layer in AE can be exported a couple ways but by the time it gets into Flash it no longer retains the original text layer and is either rasterized or broekn up. So that is where better understanding workflow, if that is the right term, might help me ensure I use the right tool at the right time in the right order to minimize these kinds of problems.

The guys from Waterloo labs did something similar: http://goo.gl/JkOy
They used a sbRIO, which is very similar to myRIO and you should have no problem doing this with myRIO. More info on their setup can be found here: http://www.ni.com/white-paper/11966/en/. You may even be able to re-use some of their code.
-Sam K
LabVIEW Hacker
Join / Follow the LabVIEW Hacker Group on google+

Which logical partition for which physical one ??

Dears,
I have a linux machine and 4 harddrives on RAID 5.
Now when i run $ df -k I have:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
411043104 225881224 164282112 58% /
/dev/cciss/c0d0p1 101086 15962 79905 17% /boot
none 3113092 0 3113092 0% /dev/shm
You have new mail in /var/spool/mail/root
Now from above i can see that almost 400GB is mounted on / .
How could i know how they are distributed over the 4 harddrives?
lets say i have Oracle Apps in /u01/oracle, now i need to put the archives, copy of control file in a different disk other than the Applications disk?
Firas

You are welcome.
If you need more details about LVM, you may have a look at Chapter 7 and 8 of Red Hat Enterprise Linux 4: System Administration Guide
http://www.redhat.com/docs/manuals/enterprise/RHEL-4-Manual/sysadmin-guide/ch-lvm-intro.html

Flatcable of iPhone 3GS? Which for which purpose??

Hello
When you open the iPhone 3GS. (Lift the LCD). The LCD/Thoughscreen ist connected to the mainboard with 3 cable.
Can someone tell me which cable is for which purpose. They are numbered as 1), 2) and 3)
Who is able to inform me?
Gérard

In some countries, Apple offers trade-in discounts. Taking advantage of them is not fiscally responsible for the user as you can get significantly more value for the device through other sites or by selling it yourself.

Which Mac Pro for print and which for web

My department is going to be purchasing new computers in the next month. I want to make an informed decision on which ones to buy.
We have both print and web designers. All will be getting new computers. However, I think that print and web probably have different technical needs.
So, of the three available: Quad-Core, 8-Core and 12-Core...which is best for which medium?

You could get along fine with an iMac.
You could wait and be forced to use Lion compliant apps
Do you need heavy grapic cabability you probably want 24GB RAM, not 8-12 cores but fastest single cpu available. Or even stock 4-core 2.8 (you don't want more and slower though like 2.4 or 2.6 or even 2.93GHz models).
Mac Performance Guide Reviews

Which Driver for MS SQL-Server 2000

Hello,
i need to access a MS SQL-Server 2000 and want to ask which driver you think is the best one for this problem.
I am not a big fan of using beta-Software, and i do not need the newest state-of-the-art features. Right now i also do not need Connection-Pooling.
Only a few SQL SELECT/UPDATE-Statements nothing more.
But maybe in not far away future, Conn-Pooling and Procedure-Calls could be interesting. And i think Type 3 or 4 would be the best decision.
The Software will run on NT, but i do not want to use the JDBC/ODBC-Bridge, because it is so unbelievable slow.
I am interested in WHICH DRIVER you USE, AND especially which drivers you DO NOT USE ANYMORE, and why.
It would be great, if anyone could help me, finding the best solution.
P.S.: The price of the driver: It would be good, when it is for free. But if you know a good commercial driver i am also interested in.
P.P.S: Yes, i have searched for drivers under http://servlet.java.sun.com/products/jdbc/drivers. But there are 37 different Type 3/4 drivers.

You can try the jtds project .Search for it in www.sourceforge.net. It is derived from FreeTDS JDBC driver. Both of them are Type 4 JDBC drivers. So far I have tried both of them a few years ago. And jtds is more updated (during those time, not sure what the status is right now)
Or, you can get Microsofts own JDBC driver

Which driver on the Install DVD is for HFS+ read in Windows?

I installed Windows 7 Enterprise x64 on my MacBook of course about a week before Snow Leopard was released and have already gone through the tedious, time consuming process of getting all of the Windows drivers working for Win7x64. I really don't want to go through installing all of the various drivers again one by one (especially since I JUST did this) until I see the MAC partition in my Windows side (BootCamp) if at all possible... so does anyone know WHICH driver it is that will allow the HFS+ partition read? I really don't want to mud up my fresh Win7 installation by re-installing every BootCamp driver from the AppleOS CD. Thank you guys in advance, I really appreciate the help.

Yes Windows can, Leopard comes with the drivers for Windows to view HFS+. It does not need 3rd party software anymore as I have personally done this on another mac in the office. I went through and installed ALL drivers all at the same time though, so I don't know which one is the one that allows this. In Windows, it displays the MAC partitions as drive letters and you can read the partitions, you cannot write, just like NTFS.

My itunes library was on my PC. About two years ago I switched it to my Seagate server/hardrive. (itunes-preferences-advanced-change library). Last summer (2012) I bought a macbook, which seems to access the seagate server hard drive fine for word docs,

My itunes library was on my PC. About two years ago I switched it to my Seagate server/hardrive. (itunes-preferences-advanced-change library). Last summer (2012) I bought a macbook, which seems to access the seagate server hard drive fine for word docs, excel spreadsheets,etc. It also seems to have started its own library which is not complete. My PC died this summer (I still have it though).
Now when syncing any of the multiple devices (ipods,ipads, iphones) that we have with my mac book, itunes states that "an error occurred" or the "app cannot be found". Itunes wants me to erase the device and sync with my macbook. The message "The iPhone “Renee’s iPhone” is synced with another iTunes library on “Renee PC”. Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."appears.
Any assistance would be greatly appreciated.
Renee

u can give try to using external enclosre and backup ur files. I hope u will get files back. or using external enclosre with ur hdd boot into Linux and try to mount ur harddisk.
there are multiple no of tutorial to mount apple partion in Linux.

I just bought a new MacBook Pro. I have Word 2008 which I used for my old Mac. It's on a DVD. So how do I download it onto my new Mac book when it has no DVD drive?

I just bought a MacBook Pro. I have Word 2008 on a DVD which I used for my old Mac. How do I download it on the new MacBook since it has no DVD drive?

Connect a drive to your new computer.

Which driver for an "Audigy ADVANCED HD Audio" from De

Notebook: Dell Inspiron 6400
OS: Vista 64-bit
Sound card according to Dell: Creative Labs Integrated Sound Blaster Audigy ADVANCED HD Audio
I am unsure which driver to download for this sound card. Would it be simply the "Audigy Series" driver? This particular name is not mentioned in the supported cards.

AeonSpace wrote:
Notebook: Dell Inspiron 6400
OS: Vista 64-bit
Sound card according to Dell: Creative Labs Integrated Sound Blaster Audigy ADVANCED HD Audio
I am unsure which driver to download for this sound card. Would it be simply the "Audigy Series" driver? This particular name is not mentioned in the supported cards.
The Audigy Advanced MB isn't a device, it is an application that makes your onboard sound sound better. Therefore, it doesn't have a "driver", the only drivers involved would be the driver for your onboard sound, which you need to get from Dell.
As for the application itself, it is my understanding that it's not ready for Vista yet, and I am currently trying to get an update on that situation.
Dale

Which drive is for which?

Similar Messages

Maybe you are looking for