Which driver on the Snow DVD allows the track pad to scroll?

I successfully installed 64-bit Win 7 Pro on my MacBook Pro 3.1, and I can right click, but I can’t scroll by dragging. Now, since this MBP is from before multi-finger gestures were introduced, save for scrolling with two fingers and right-clicking by placing two fingers on the pad and clicking with the button, which of the drivers on the Snow DVD will install scrolling like I can with Mac OS X? Peace.

Yes Windows can, Leopard comes with the drivers for Windows to view HFS+. It does not need 3rd party software anymore as I have personally done this on another mac in the office. I went through and installed ALL drivers all at the same time though, so I don't know which one is the one that allows this. In Windows, it displays the MAC partitions as drive letters and you can read the partitions, you cannot write, just like NTFS.

Similar Messages

  • Which driver on the Install DVD is for HFS+ read in Windows?

    I installed Windows 7 Enterprise x64 on my MacBook of course about a week before Snow Leopard was released and have already gone through the tedious, time consuming process of getting all of the Windows drivers working for Win7x64. I really don't want to go through installing all of the various drivers again one by one (especially since I JUST did this) until I see the MAC partition in my Windows side (BootCamp) if at all possible... so does anyone know WHICH driver it is that will allow the HFS+ partition read? I really don't want to mud up my fresh Win7 installation by re-installing every BootCamp driver from the AppleOS CD. Thank you guys in advance, I really appreciate the help.

    Yes Windows can, Leopard comes with the drivers for Windows to view HFS+. It does not need 3rd party software anymore as I have personally done this on another mac in the office. I went through and installed ALL drivers all at the same time though, so I don't know which one is the one that allows this. In Windows, it displays the MAC partitions as drive letters and you can read the partitions, you cannot write, just like NTFS.

  • Which drive is the boot drive?

    I installed a 2nd hard drive in my G4 dual 1ghz sometime around 2001. I'm now on a G5 and would like to pull the 2nd drive from the G4 and put it in a firewire enclosure to use with the G5. How can I tell which drive is the boot drive and which is the secondary drive? I kind of remember that the 2nd drive went in the lower bay but I'm not 100% sure. Any other caveats to pulling out this drive? Thanks in advance.
    Power Mac dual 1ghz    

    The system profiler should tell you the serial number of the hard drive, or type of hard drive when you select it in the IDE bus. Compare that with the label on the drive itself.
    Both bays can have boot drives, though typically master jumper drives are better able to boot than slaves on certain operating systems.
    You can tell the existing boot drive, because it is the first drive that appears in the upper right hand corner of the desktop if you view and arrange the desktop by kind.
    If you just want to transfer data over from a G4 to a G5, you may want to use Target Disk Mode:
    http://docs.info.apple.com/article.html?artnum=58583
    Note, if the G4 is the kind that can boot into Mac OS 9, set it as the Target machine. In addition, if it is running 10.2.2 or earlier it should be the target machine, because 10.2.2 and earlier don't understand the Journaled operating system which may be installed on your G5.

  • Which driver supports the previous, next, last, first methods defined in jd

    which driver supports the previous, next, last, first methods defined in jdbc2.0?

    erm... all JDBC2.0 drivers.
    Check out http://industry.java.sun.com/products/jdbc/drivers u can do a search for JDBC2.0 Drivers.
    Hope this helps!
    Sam

  • With snow leopard, basic keyboard functions like double clicking on a desktop item now require me to hold control and then click on the track pad.  I'm trying to recall, I seem to remember Leopard allowing you to double click items to open them?

    I notice in iPhoto that if I used to be able to single/double click on a photo to view it but now if I click CONTROL and then the TRACK PAD, the options don't allow me to open JUST that photo in nearly full page format.  Any suggestions?

    "nearly full page" means that I used to be able to double click on a photo in iPhoto, and it would open up to a full image within iPhoto itself.  Now, there is absolutely no option to enlarge a photo unless you go to slideshow - no option to double click or side click or Control+click or Command+click or anything at all.  The small white arrow at the bottom right corner of every photo gives you options, but none are options that include enlarging a photo to see it bigger.  And no, you cannot double click it at all to even open it up in any other app unless you click/drag onto desktop and then open in Photoshop, or equivalent app. Yes, checked TP preferences.  No, it doesn't help.

  • Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit).

    Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit). Have tried it on other browsers, and works as it should. The last add-on i installed for Firefox was "Fox Filter" so my kids couldn't accidentally stumble onto sites of immoral tastes. I can't see why that would have any effect, but it was the last update/add-on i installed to the browser, but even then,.......it was working fine for a week and a half afterwards until now. Please help.
    == This happened ==
    A few times a week
    == A week and a half after i installed Fox Filter. ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

    Hello Steve.
    You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    If you detect a faulty add-on, you should contact its author for support. You can also search for alternatives. Site filters are relatively common in the add-ons gallery: [http://addons.mozilla.org addons.mozilla.org].

  • Can I load adobe flash drive on the I-pad or is there an alternative?

    can I load adobe flash drive on the I-pad or is there an alternative?

    Flash is not, and probably never will be, supported on the iPad - and Adobe have never managed to make a version of their flash player that works on iOS devices, and they've recently announced that they are stopping development on all mobile versions of it.
    Browser apps such as Skyfire, iSwifter Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, and there is the built-in YouTube app.

  • I have an older model macbook pro late 2006, the track pad works ,the cursor works but i cannot click to any website?

    i have an older model macbook pro late 2006, the track pad works ,the cursor works but i cannot click to any website?

    khryzpher,
    your model MacBook Pro’s Apple Hardware Test comes on one of those two grey installation DVDs; it’s an essential tool for troubleshooting. You’re going to need to contact Apple directly to purchase a replacement pair for your MacBook Pro; be sure to have its serial number handy.
    Your model MacBook Pro didn’t originally come with Snow Leopard installed at the factory. If you don’t have the white retail Snow Leopard DVD, then I’d also recommend that you purchase that, in case your hard drive fails and you’d like to install Snow Leopard onto its replacement.

  • Satelite P500-12F will not load the track pad drivers!

    Hi, I just got a driver DVD for this lappy and its a self intall of all drivers that are missing or need updating, when ran I was told the track pad driver was missing and started to load it but it won't I tried a force load but hat also failed, the track pad has not worked since getting this second hand could the track pad be disconnected from the main board?
    Would this make the driver fail to load please?
    Any help would be truly appreciated.
    Many thanks, Wayne..

    Hi, When I bought this second hand the guy removed the hard drive for data protection and put in a new drive so no Toshiba software on ths one, the dvd was bought from ebay and is a driver dvd from USA no operating system it just self installs the drivers after windows has been installed, as in OP the track pad was not working and I thought it may be just the driver fault but it will not load it even with a forced install so I am just wondering if the track pad is actually connected, when the disk is inserted it searches for missing drivers and looks for updated drivers on the disk and it says then it is missing this driver but will just not install it, very confusing indeed.
    Regards, Wayne..

  • NO Cursor scroll through any message thread using the track pad in the BB Classic

    It very strange to know that I didn't find the cursor while i will scroll through any message thread i.e. Text msgs  and in Whatsapp it will only selet the whole msg or multiple msgs rather then specfic text required, using the track pad in my BB Classic.
    Where in my old BB 9780 there was a cursor which would always show there and would help in selecting text required.... Rather in BB Classic first you have to activate the selection mode in text msgs by pressing the shift key an slighty brush the finger against the trakpad. then you get the selection blue sticks on the screen to selet the text required.
    Anyone who has noticed this short coming...?? Or it might be I am not very familair with the selection methods...!!!
    Will appreciate your help
    Thanks,
    Falak Zaib

    This is normal behaviour. Please go to the "Tutorial" app select
    "Editing Text"
    It will show you exactly how it works.
    Blackberry Engineering in Switzerland - Dexion Services AG

  • How do you control the track pad?

    The track pad seems to have a mind of its own after Lion installation. Seems to copy everything it crosses over. Is there a way to have it behave like it did in the Snow Leopard?

    >Preferences>TrackPad

  • Did Lion eliminate the finger gestures for show the previous page and show the next page?  I've checked system settings for the track pad and it looks like the got rid of one of my favorite finger gestures when browsing the internet.  How do I get it back

    I've upgraded to LION. It looks like LION eliminates the finger gestures within internet browsing that used to yield navigating to the previous page or navigating to the next page.  I think it was a 3 finger swipe to the left and a 3 finger swipe to the right.  It looks like this has been eliminated.  I've gone into the system preferences and went through all the new settings for the track pad finger gestures.  I've not found a combination that allows me to swipe on the track pad to do the page forward / page back function.
    How to I get this back?  I was my favorite one and now I can't get there!

    For going back to the previous page try a 2-finger gesture. Two fingers in the other direction will take you back.
    cornelius

  • Gt780 brushed aluminum panel slightly "raised" near the track pad

    I bought a GT780 i5 version about a month ago, ever since I noticed that the brushed aluminum panel is slightly raised at the top edge of the track pad, seems the adhesive didn't do its job anyway, when i try to press down lightly to try and set it back, i noticed that the track pad itself may have been installed/set too low... why do I say this? Because when i try to press down on the aluminum panel at the top of the track pad it sets lower than the surrounding aluminum, which indicates that the portion on top of the track pad is lower.
    I have no idea how this unit is put together, I do not know if the plastic underneath the aluminum panel is a 1-piece design or otherwise...
    anyway, that's my only gripe... as it looks cheap and unprofessional.

    The first thing to do of course is take it back to where the repair was done and see if they are willing or able to make it right. If you get no satisfaction from them, you could then call Apple Customer Relations and explain that the repair was not properly done at their authorized repair facility and that you feel that the damage inflicted on your computer ought to be repaired. Be very nice and polite. You may need to send it off to Apple for proper repair. But if you are under Applecare, then they really should take care of this.
    If you just have a one year warranty, you might consider purchasing the 3 year warranty. Otherwise, once your one year warranty is up, you will be on your own. If you are at all close to the end of your 1 year warranty, be sure and get a case number documenting that the problem first occurred under warranty.
    Good luck!

  • The track pad on my MacBook Pro is going crazy what can I do?

    Yesterday I tried using my Mac book pro when I noticed that my track pad wasn't working it would either move really slow or not at all and then when it does move it goes all crazy and starts moving or clicking things with out me doing anything what can I do two days ago it was working fine and I have tried cleaning the track pad 

    The same happend to me, you need to call applecare or take it to the genius bar to have the trackpad swapped out. I hope you have applecare becuase the unibody macbooks will need the whole bottom chassis replacing which can be pricey.
    Just a quick fix (it will only work for around 30 mins each time) untill you can take it in. Press all four corners of the trackpad down hard (without breaking it) then let go. Your trackpad should work for a short while.

  • Light tap the track pad to simulate clicking

    I'm coming from the MS Windows laptop. I noticed that I have to actually press the track pad (I'm not sure if that's what it's called) and simulate clicking. In the MS Windows side, I can lightly tap the track pad area and it would be a click. Is there a setting on the Mac OS X Lion or Macbook Air that would allow me to do this instead of hard pressing the trackpad for a click?

    Thanks for the help, that worked. However, as I turned it on, I now realized why I was having so much problem with the MS Windows laptop trackpad; thus, they provided a way to turn off the trackpad. I realized that the problem was, if I was typing on the keyboard and my hand accidentally touch the trackpad, it moves my cursor to somewhere else and that's why in the MS Windows laptop they have a turned off trackpad button/feature. I see why this feature was turned off by default in Mac OS.

Maybe you are looking for

  • ICWC document emailed with no extension or PDF corrupted.

    CRM 5.0 SP11. 1. We access a document in the inbox and an attached document exist & agent has visbility to the document in the Document Search (order ack, invoice) saved in CMS as OTF files. 2. Agent can click the hyper link and see the document (Goo

  • How to define FORMAL parameters for TABLES in OOPS?

    Hello Experts, Below is the custom code, would like to put in a user-exit PERFORM my_routine IN PROGRAM my_report TABLES standard_sap_vbap_tab USING standard_sap_variable CHAGING standard_sap_variable Pls. let me know How to write the FORM in perspec

  • Credit block for partial confimed item

    Hi all,     I meet such situation:    Excample I create a SO will 10 pic, and the system only confirm 5 pic, then system credit check and block the SO. But when i use vkm1 release the so , the confirmed quantity is cleared to zero. And i have tested

  • VOFM copy item text from STO to delivery

    Hello, Has anyone succesfully copied item text from a stock transport purchase order to the delivery by using a rule defined in VOFM data transfer > text  ? I can do it  for the 1st item of the PO, but the second item just pulls the info from the sal

  • Same line items

    Hi,      While creating a sales order ,my requirement is that the system should not accept same line item two or more times. Eg.,   Line item 10     xyz  material           10 units          Line item  20    xyz  material            20 units In the a