Which driver to use for Satellite A300 - Latest one, by date or by version?

For my laptop (A300-1HV) I am looking at the driver downloads available.
There are many drivers which have a LATER modified date but LOWER version number.
Or if you like, an EARLIER modified date and HIGHER version number.
How do I decide which is the most up-to-date driver?
Thanks.

You can install your own operating system without problems. As you can see all necessary drivers, tools and utilities you can find on Toshiba support page.
To be honest I do not understand what confuses you so much. Usually there is one driver for each hardware component and just one version for each tool or utility.
If you have question about some specific driver or tool please let us know and we can try to help you.
Please install all stuff following installations order. If you cannot find it let us know.
Good luck!

Similar Messages

Doubt about which driver to use for ATI Technologies Inc SB600 IDE

Currently this is what I get with lspci -v
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP PriP])
Subsystem: Device 1631:c109
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ff00 [size=16]
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp, atiixp
it seems there are two different modules I can use, is the one being used an older one and I should blacklist it or should I follow the rule if it isn't broken, don't fix it?

As mentioned in that page, I added the 'radeon' repository and installed the following packages:
- kernel26-firmware-git
- radeon_ucode
- dri2proto-git
- glproto-git
- libdrm-git
- mesa-full
- xf86-video-ati-git
The process did not turn out to be smooth. Package addition could not be done even after supplying '--force' to pacman. For example:
$ sudo pacman -S -f dri2proto-git
resolving dependencies...
looking for inter-conflicts...
:: dri2proto-git and dri2proto are in conflict. Remove dri2proto? [y/N] n
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
Then, I resorted to libaral use of '--cascade' and the box failed to reboot. Had to boot from CD, mount partitions, chroot to the installed system and reinstall the kernel (infact, all packages using a list that I had saved before starting).

Hard Drive Setup - which drives to use for what

So I have decided on buying a segate 7200.14 hard drive (Tell me if this is a bad one, I just saw a bunch of reviews and benchmarks and it is supposed to be one of the fastest), but I'm not sure weather to use it as a scratch disk, a media disk, or an OS disk. Currently I only have one slow, old 500gb drive, which I was going to use to store old media and exports (I don't need to acces projects that I worked on a year ago). I have an external backup drive as well. I was thinking of getting the 7200.14 drive, since it is so fast and cheap and using it for my main drive, but now I'm wondering, would I be better off using it as the scratch drive? I can always wait for my OS and programs and such to load slower, but I'd like stuff inside of the program to be quick. I also don't care much about exports since I'm in no rush to get the work out as quick as I can, and I normally just leave it rendering overnight.
TL;DR
1.) slow, old 500gb drive
2.) new, fast 7200.14 drive
3.) I can possibly buy another drive if it's absolutely necessary, but I have gathered that the third drive is for OS, which I don't need to load quickly at all.
Which one of these things is most bottlenecked by the hard drive? What should I do with my hard drive setup?
EDIT:
Also, is the 7200.14 a good drive? Tell me a better one if you think of one. I was thinking of getting the 1tb version but I might get the 3tb version for storage, since its a much better $/gb.

Alright, I've gathered that the media cache and the medi files are not suited to be on an SSD (media because of large file sizes and media cache because of longevity, since it has to read and write so many times). But which one would I benefit more from being faster? Or could I just leave them both slow, and get two cheaper slower hard drives instead of the one fast 7200.14?

Replacing SD-R6112 - which drives are compatible for Satellite A30?

Hi,
I would like to replace my old CD DVD combo drive SD-R6112 installed on a satellite A30 laptop into a newer drive. (another drive which could burn DVD faster and burn DVD double layer if possible.)
Do you know which model I could buy in order to replace my old defect SD-R6112?

Hello guys
Fact is that you will need a drive with the right master /slave or c-sel settings.
Not compatible drives with wrong settings would be not recognized by BIOS.
You should also know that these settings cannot be changed like on the external drive by switching the jumpers.
Therefore I would really recommend asking the ASP in your country for compatible devices.
I have investigated a little bit in the net and found these:
- Matsu****a CD-RW/DVD-ROM UJDA740,
- Matsu****a DVD-RAM UJ-810,
- Matsu****a DVD-ROM SR-8177
- TOSHIBA CD-RW/DVD SD-R2212,
- TOSHIBA DVD-R/-RW SD-R6012
Hope I could help

2035n which driver to use for 32bit share on 64bit Server 2008

I've just got a new 2035n.
I'm sharing the printer on a windows 2008 server 64bit. I used the vista64bit driver to get it installed on the server.
I'm trying to add x86 drivers in the share tab so that my xp machines will automatically install the driver once I initiate to connect the printer to the workstation.
I'm having a really hard time to find a driver that will work. Every time I try another driver it gives me this error:
"The specified location does not contain the driver HP LaserJet 2035n for requested processor architecture."
I've tried every driver listed on the drivers download page and cannot get anything to work. Does anyone have any suggestions.
Thanks so much!!

I sent out some pings about this situation yesterday but
haven't gotten anything back yet.
Flash Player itself supports any 32-bit browser running on a
64-bit OS. That's not the problem here... What you're seeing is OS
detection on the Flash Player Download center.
So I'm still waiting for someone from the web team to get
back to me..

Which movement type use for return stock form one plant to other plant in

HI friends i am working on STO PROCESS
i need to transfer return stock from one plant to other plant as a return stock i am using Mvt type 455
but system shows following error
Update control of movement type is incorrect (entry 455 X X _ L)
Message no. M7226
Diagnosis
The system could not find entry 455 X X _ L in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
thanks in advance

Hello,
     I think there is a standard STO movement type you can use. But I can't remember. Why don't you try to find it and test if it fit your requirement?
     There are some information for your reference. Please check on website:
http://www.sap-img.com/materials/difference-for-stock-transfer-and-transfer-posting.htm
Using STO without delivery:
doc.type: UB
GI:351, GR:101
STO with delivery:
GI:641, GR:101
delivery type:NL
STO with delivery and billing:
GI:643, GR:101
delivery type:NLCC , billing type:IV
     And if you want to use the way to return the goods replenishment, try to flag the return checkbox while you create purchase order item. Of course, corresponding configuration is required.

Apple usb jis keyboard in windows xp which driver to use

hi,
i bought the apple jis usb keyboard for my wife since it looked nice and was usb. it is supposed to be like standard 106/109 layout for japanese jis. However, I am not sure which driver to use in windows xp. xp will try to use the standard hid driver. I set it to microsoft 106/109 usb and while all the standard keys match up, the special language mode keys do not.
Any help here? (ie. use alps usb japanese keyboard driver) or is there a downloadable driver?

actually found a kernel mode driver called
applek pro 1.8.x which will allow for this.. Anyone try it?
thoughts?

Which Driver to Use?

I have been using the Windows 7 x64 drivers with no problems, but i notice Daniel k's drivers located here ( http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485 ) and am now wondering if i should used it's Is it worth the swap or should i stick with official stuff?

Re: Which Driver to Use?S jmacguire
<a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790;jsessionid=08A63644D695A7B9CB69AFAF7A46DCEC "]http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790;jsessionid=08A63644D695A7B9CB69AFAF7A46DCEC[/url]
Will those drivers work with my PCI X-Fi platinum?
Also, what do you mean install the creative drivers on top? Do you install the Daniel K drivers then the creative ones?
Thanks for all the help you have provided to others so far.
I am having SCP issues with an X-FI platinum on an EVGA 780i SLI motherboard (not running SLI) with a Q6600, 4gb of ram (in all 4 slots) and an 8800GTS on Windows 7x64 pro.

Extended warranty for Satellite A300-15C

Hi
I am new here so sorry if I posted it under wrong thread.
I want to buy extended warranty for Satellite A300-15C (1+1 standard warranty) so I wanna ask which warranty package gives the longest protection for this model.
2+2 is the longest? ID: SE5054I-PDB.
Secondly, and more importantly, the laptop is more than 1 year old. When i was buying it, in retail store they told me that the extended warranty can be activated at any time, but now I see that there is this 30 days deadline policy. Is there any way how to overcome?
Thanks

Hello Pingo
You must understand that this forum is user-to-user forum and what you need is expert advice. So I recommend you to contact nearest Toshiba authorized service provider and order best extended warranty option.
At first you can visit Toshiba support page and pick up some info about warranty options.
The link is http://eu.computers.toshiba-europe.com > Peripherals & Services
On the same page under Support & Download > Find an ASP you can find address and phone number of your nearest ASP.

HT201250 How do I find out what portable drive was the drive I used for Time Machine Backup?

Hi, I have 10.7.4 and need to figure out what drive I was using for Time Machine Backup. I have three drives and I have connected each of them to my macbook pro, but I get an error, "Time Machine Error, The backup disk is not available" when I hit the time machine icon on the top of the screen and the "backup delayed" prompt. If I try Back up Now I get message, "Time Machine could not complete the backup. Back up disk is not available." I am trying to figure out what the time machine back up would actually look like as a file on the drives but I don't see a folder/file name Time Machine. If I enter Time Machine I can see in the far right column, in purple, the last back up date (Sept. 12, 2012), but when I hit it nothing happens. In the Time Machine preference box the select disk has, in red and to the right, "Delayed" with an "i" within a circle, and the option indicates, "Next backup: when disk is connected."
I know I have a years worth of backups on one of the three drives, but I can't figure out how the heck to find them or how to determine what was the last drive I used for the backups within Time Machine. Help please.

Hi, I have 10.7.4 and need to figure out what drive I was using for Time Machine Backup. I have three drives and I have connected each of them to my macbook pro, but I get an error, "Time Machine Error, The backup disk is not available" when I hit the time machine icon on the top of the screen and the "backup delayed" prompt. If I try Back up Now I get message, "Time Machine could not complete the backup. Back up disk is not available." I am trying to figure out what the time machine back up would actually look like as a file on the drives but I don't see a folder/file name Time Machine. If I enter Time Machine I can see in the far right column, in purple, the last back up date (Sept. 12, 2012), but when I hit it nothing happens. In the Time Machine preference box the select disk has, in red and to the right, "Delayed" with an "i" within a circle, and the option indicates, "Next backup: when disk is connected."
I know I have a years worth of backups on one of the three drives, but I can't figure out how the heck to find them or how to determine what was the last drive I used for the backups within Time Machine. Help please.

Which method is used for event creation

Dear All,
My client has more then one Purchase Organization. Workflow for Purchase order release very from pur org to pur org. For example - workflow WS92000030 is trigger when PO is created for India pur org where as workflow WS92000021 is trigger when PO is created for US pur org.
I checked and found that same Object Type - BUS2012 & event - RELEASESTEPCREATED is used in all Pur. Org PO release workflow. Also I found in Transaction code - SWETYP that Type linkage activate for BUS2012, RELEASESTEPCREATED in all the PO workflow - WS92000030 & WS92000021.
As per my knowledge, event can be created in various way such as Function module, Change document, General status management, Business Transaction Events etc.
Can some one guide me, how can I found that which method is used for event creation in different pur org?
How can I fould what is the fuctional module used for event creation if Fuctional module used for event creation.
For your information, I can see in T. Code - SWUO that 'Result dependent on a check function module' for all the workflow - WS92000030, WS92000021 etc.
Thanks in

Hi Sahu,
I dont think they have used the Function module or change document or any other kind of methods to trigger the workflow. This is because RELEASESTEPCREATED method is a standard method and it will be triggered by standard SAP. They can not make changes in standard sap saying RELEASESTEPCREATED should be triggered for this Purchase Org .
Istead what i think is, they might have given the Event Condition for each workflow.
In SWDD>> basic settings>> Start Events, we can give condition on triggering the workflow.
Please check this.
Regards,
Gautham

Which CKM is used for moving data from Oracle to delimited file ?

Hi All
Please let me know Which CKM is used for moving data from Oracle to delimited file ?
Also is there need of defining each columns before hand in target datastore. Cant ODI take it from the oracle table itself ?

Addy,
A CKM is a Check KM which is used to validate data and log errors. It is not going to assist you in data movement. You will need an LKM SQL to File append as answered in another thread.
Assuming that you have a one to one mapping, to make things simpler you can duplicate the Oracle based model and create a file based model. This will take all the column definitions from the Oracle based model.
Alternatively, you can also use an ODI tool odiSQLUnload to dump the data to a file
HTH

How to specify which cert to use for software virt server?

Is there a way to specify which certificate to use for each software virtual server? So, for example a user hitting https://somewhere.com would get the certificate for somewhere.com while the virtual server https://somewhereelse.com would use the certifcate with the name somewhereelse.com in it?

No, this is not possible due to limitations of the underlying protocols.
HTTP requests are sent over TCP connections which deal with IP addresses and port numbers (i.e. hardware virtual server properties), not hostnames (i.e. software virtual server properties). The HTTP protocol adds software virtual server support by allowing a client to identify the hostname (e.g. "www.iplanet.com") of the server it wishes to communicate with. This is achieved by including a "Host:" header with each HTTP request.
Unfortunately, the SSL/TLS protocols require that the web server present its SSL/TLS certificate BEFORE the client sends its HTTP request. Since the software virtual server information is contained in the HTTP request, it is not possible for the server to select different certificates for different software virtual servers.
You will need to use hardware virtual servers (i.e. virtual servers that have different IP addresses and/or port numbers) if you wish to use distinct SSL/TLS certificates.

After reopening Firefox does not remember which desktop was used for each window. Can you help, please.

I'm using two displays and several desktops on my Mac (OS X 10.9.4).
When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?

Hi Nerva,
Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.

HT1918 I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

JarleEkanger wrote:
How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
Here's one simple way to do it..
(If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
averages of 10.png ‏5 KB
averages of 10.vi ‏9 KB

Which driver to use for Satellite A300 - Latest one, by date or by version?

Similar Messages

Maybe you are looking for