Which driver to use in the BPM Configuration Steps?

Hi,
I´m in the BPM configuration steps and we will use BPM on a Weblogic Server, I´m in the step when you need to create to JDBC Data Sources for the Enterprise and Directory Databases, do you know which driver shoul I use? should it be XA o Non-XA?
Thanx in Advanced!
Kind Regards,
Gerardo J

Since there are no drivers, you can create your own, request one, use the Instrument I/O Assistant, or hope someone has one and posts it here. For help on creating one or requesting one, see the main Instrument Driver Network page. As long as you are familiar with the instrument and have the manual, creating a driver is not that hard.

Similar Messages

  • Apple usb jis keyboard in windows xp which driver to use

    hi,
    i bought the apple jis usb keyboard for my wife since it looked nice and was usb. it is supposed to be like standard 106/109 layout for japanese jis. However, I am not sure which driver to use in windows xp. xp will try to use the standard hid driver. I set it to microsoft 106/109 usb and while all the standard keys match up, the special language mode keys do not.
    Any help here? (ie. use alps usb japanese keyboard driver) or is there a downloadable driver?

    actually found a kernel mode driver called
    applek pro 1.8.x which will allow for this.. Anyone try it?
    thoughts?

  • Which Driver to Use?

    I have been using the Windows 7 x64 drivers with no problems, but i notice Daniel k's drivers located here ( http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485 ) and am now wondering if i should used it's Is it worth the swap or should i stick with official stuff?

    Re: Which Driver to Use?S jmacguire
    <a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790;jsessionid=08A63644D695A7B9CB69AFAF7A46DCEC "]http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790;jsessionid=08A63644D695A7B9CB69AFAF7A46DCEC[/url]
    Will those drivers work with my PCI X-Fi platinum?
    Also, what do you mean install the creative drivers on top? Do you install the Daniel K drivers then the creative ones?
    Thanks for all the help you have provided to others so far.
    I am having SCP issues with an X-FI platinum on an EVGA 780i SLI motherboard (not running SLI) with a Q6600, 4gb of ram (in all 4 slots) and an 8800GTS on Windows 7x64 pro.

  • How can i determine which devices are used at the moment?

    Hi all,
    I am designing an interface with LabVIEW for uing agilent devices. My work colleagues will use this interface.  I want to determine which devices are used at the moment and if I determine used device, i will add automatically device names to interface's main vi. So all my work colleagues can see on the program which devices are used by another colleague. This devices are connected with GPIB. İ want to learn is there any function on Instrument I/O palette.
    Thanks,
    Omer
    Solved!
    Go to Solution.

    Hi Omer,
    so those devices are connected to the PC with a GPIB connection. Will your collegues run several DAQ programs at the same time?
    GPIB-devices being controlled by PC don't have a "in use"-signal. They wait for commands, execute them and send an answer. When you start to control them using two programs they may respond to both programs, mixing up settings/measurement values and so on.
    That being said: In MAX you can see all devices connected to your GPIB port. You could scan the GPIB port using VISA commands in your program. You might even try to access a certain device by it's VISA alias. I really don't know if you will get a "device nopt available" error message when that VISA alias is in use by a different program - but you might do a quick test on your own…
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • When I send an email with Mail, I often confuse the account which I'm using. The result is that I send a message with the wrong account! Is there a way to avoid this (for example a reminder before the email is sent)?

    When I send an email with Mail, I often confuse the account which I'm using. The result is that I send a message with the wrong account! Is there a way to avoid this (for example a reminder before the email is sent)?

    Hi, thanks for the answer, I did that already. Unfortunatly this doesn't help me at all, as I often forget to check the menu. For me composing the message is writing the text, the subject, the person to who is addressed and than press "send".
    I often forget to check the "from", and this is a problem because the software select itself one of the accounts.
    Isn't there a way at least to put as a default a blank field instead of one of the accounts? or an account which doesn't work so if I forget to specify the "from" I will be rnotofied that the message can't be sent.
    I guess this could be a rather common problem for many people!
    Thanks
    Sergio

  • I have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    Thanks.  Thought that would be the solution but for my wall mounted TV it's going to be a problem but many thanks for your reply.....

  • How to know the full path which is being used in the dataconnection .

    How to know the full path which is being used in the dataconnection without going and looking into coding.
    I am new to crystal reports.
    Plz advice.Thanks in advance
    Jay

    This forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net.
    As you do not want to do any coding, this query is in the wrong forum. However, in most versions of Crystal Reports, you can look up the database connection information by simply opening the report in the CR designer. Then go to the database menu and select "Set Datasource Location..."
    Ludek

  • How can I know which file is using by the self-service workflow?

    Dear all:
    In my directory, there are two HRSSA.wft and How can I know which source is using by the workflow of the self-service ?
    my environment is oracle 11.5.9 | self-service 4.1 | workflow builder 2.6
    Thanks
    regards
    Terry

    One way would be to download the HRSSA workflow to a wft file (using the WFLOAD utility - see MOS Doc 578248.1), then comparing this downloaded wft file with the two files you have (using a utility such as diff in Unix). The comparison that reports no differences will identify the wft that was uploaded into the database.
    HTH
    Srini

  • I do not know which email i used for the my old apple ID.

    I do not know which email i used for the my old apple ID. All I know is that it goes C*****@gmail.com. Is there any way for me to figure out my username or email used for the apple id without having the username or email logged in?

    You need to try each one you think it might be, or try using Apple’s iForgot service, or if you’re the device’s original owner, take it and its purchase receipt to a physical Apple Store.
    (117341)

  • BEA MS Sql server which driver to use?

    We have BEA weblogic 8.1 and want to work with sql server Which driver
    shoudl we use ?
    i believe driver is deprecated
    Bea talks about the new driver
    "WebLogic Server 8.1 SP1 includes a new JDBC driver from BEA for connecting
    to a Microsoft SQL Server database. The BEA WebLogic Type 4 JDBC MS SQL
    Server driver replaces the WebLogic jDriver for Microsoft SQL Server, which
    is deprecated. The new driver offers JDBC
    3.0 compliance, support for some JDBC 2.0 extensions, and better
    performance. BEA recommends that you use the new BEA WebLogic Type 4 JDBC MS
    SQL Server driver in place of the WebLogic jDriver for Microsoft SQL
    Server."
    Do we have to install sp1 or sp2 to work with this driver. How can we get
    sp1 ,
    Thanks,

    Where did the Driver file place?
    You can copy the driver file to the JAVA_HOME/lib
    folderDo not put that JDBC JAR in JAVA_HOME/lib.
    You should put it someplace close to your app and add it to the CLASSPATH when you compile and run?
    Geez, doesn't anybody think about a standard directory structure to use for their apps? Put it in a /lib directory with the rest of your app stuff. - MOD

  • Which driver to use to print to a dot matrix printer?

    All-
    Hi, we are using Adobe Output Designer 5.7 to create invoice templates.  We use a custom application that uses Adobe Output Central Server (5.6) to create invoices and print them to a network printer.  We are about to do a new release in Chile, which requires a dot matrix printer be used for printing due to gov't regulations.  Does anyone know what kind of print driver could be used to effectively print to a dot matrix printer?  It seems like all the drivers we have used don't work.
    Additionally, we also tried using the .pdf driver in conjunction with the Web Output Pak, but unfortunately that result is just as bad.  Does anyone know of a workaround to get Pdf's to work with a dot matrix printer?  By googling, I found that we could try copying the .pdf output and pasting into Word, but I haven't tested this yet and it makes for a cumbersome process.
    Thanks,
    Andrew

    Hi Andrew,
    Unless you can convert the PDF to a text file, and print that, I doubt there is any way to send PDFs to a Dot Matix printer.
    If you're on Windows then one way is to use the 'windows' driver option in your template to generate the output directory for the target printer - this allows non-supported printers to be used with Output Server,
    Regards,
    Paul

  • Doubt about which driver to use for ATI Technologies Inc SB600 IDE

    Currently this is what I get with lspci -v
    00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP PriP])
    Subsystem: Device 1631:c109
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
    I/O ports at 01f0 [size=8]
    I/O ports at 03f4 [size=1]
    I/O ports at 0170 [size=8]
    I/O ports at 0374 [size=1]
    I/O ports at ff00 [size=16]
    Kernel driver in use: pata_atiixp
    Kernel modules: pata_atiixp, atiixp
    it seems there are two different modules I can use, is the one being used an older one and I should blacklist it or should I follow the rule if it isn't broken, don't fix it?

    As mentioned in that page, I added the 'radeon' repository and installed the following packages:
    - kernel26-firmware-git
    - radeon_ucode
    - dri2proto-git
    - glproto-git
    - libdrm-git
    - mesa-full
    - xf86-video-ati-git
    The process did not turn out to be smooth. Package addition could not be done even after supplying '--force' to pacman. For example:
    $ sudo pacman -S -f dri2proto-git
    resolving dependencies...
    looking for inter-conflicts...
    :: dri2proto-git and dri2proto are in conflict. Remove dri2proto? [y/N] n
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    Then, I resorted to libaral use of '--cascade' and the box failed to reboot. Had to boot from CD, mount partitions, chroot to the installed system and reinstall the kernel (infact, all packages using a list that I had saved before starting).

  • Use only the BPM components of the suite

    Where can I download the complete installer of 11g(with the virtual machine option)?
    There is posible just use the BPM components and for instance the WSO2 suite for SOA?
    thanks
    Ray

    Hi Ray,
    Here's one that is preconfigured and runs on Oracle's VM Virtual Box: http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html
    Dan

  • Which port to use for the peer-keep alive

    Hi All,
    We have 2 Nexus 6001s in our data center.
    The management port of each 6001 is connected to the other and this link is used as the peer keep alive link.
    My colleague is suggesting that we use one of the inline data ports as the keep alive link.
    Can you please advise on the pros and cons of using management/inline port as keep live link and the best practise to follow in this case?
    Thanks,
    Pete

    Hi Pete,
    Here are the best recommendation in order of preference.
    1. Use mgmt0 (along with management traffic)
         * Pros: whats good on this option is you are totally separating the VPC Peer keepalive link on another VRF (management) and does not mingle with the data or global vrf..
         * Cons: VPC PKL is dependent on the OOB management switch.
    2. Use dedicated 1G/10GE front panel ports. 
        * Pros - can just be a direct link between the N6K pair and not dependent on other boxes. 
        * Cons - you need extra SFPs for VPC PKL while the VPC PKL traffic join the global VRF.
    HTH
    Jay Ocampo

  • Which songs are used in the iOS 7 video?

    I really want to know if the songs used in the iOS 7 prom video is a created soundtrack or if it is real songs.

    Thanks Johnathan. Not the neatest way, but I'll create a JPEG with the title in it....good thinking

Maybe you are looking for