Which edition of Oracle is certified for Vista and Windows 7?

Many thanks.

Windows 7, is projected.
As for Windows Vista (10g and 11g):
Oracle Database (EE, SE, PE and Client) are supported on these platforms:
- Business edition
- Enterprise Edition
- Ultimate Edition
-Andy

Similar Messages

Oracle 10g support for EM64T and Windows 64-bit

Is there support for this configuration either in a patch release for 10g or is it planned for the near future?

Hi,
Oracle 10gR1 is certified for Tru64 UNIX 5.1b.
Certification of Oracle 10gR2 for Tru64 UNIX 5.1b.is planned for 1st quarter 2006.
If it does not support directly, is there a patch available etc..No idea, perhaps can you create an iTAR to post the question.
But if you read the metalink note 283751.1 Pre-Install checks for 10gR1 RDBMS (10.1.x) - Tru64 Platforms, you can see that no workaround provide...
Nicolas.
Message was edited by:
N. Gasparotto
Adding metalink note reference.

Web ADI is not certified for IE7 and Windows XP...Supportable?

SR: 7615910.992
TACONIC FARMS INC
MSP Integration
12.06
The following error is received when trying to install MS Projects Integration:
Error
The following error has occurred
Exception Name: oracle.apps.bne.exception.BneFatalException
Cause: Microsoft VBScript runtime error: 429 - ActiveX component can't create object.
Action: Assure is installed, and check your browser's security by navigating to the Internat Explorer Tools Menu > Internat Options...
They follow the steps given and yet the error remains. The customer is using Windows XP and Internet Explorer 7.0. According to the certify tab, this is NOT a certified combination for Web ADI. When the customer tries this exact same thing using IE 6.0, no error is received. Does not running a cerified combination become a showstopper from development's perspective or should I continue my research?
Thanks, Elizabeth

Hi,
Please refer to the following documents, and see if it helps.
Note: 561095.1 - The Error "MICROSOFT VBSCRIPT RUNTIME ERROR: 429 - ActiveX component can't create object" Appears when "Create Document" is Used on 11i with BND.D
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=561095.1
Note: 416321.1 - Using Web ADI with Internet Explorer 7
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416321.1
Regards,
Hussein

Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

There is an issue with the 64 bit Vista, Windows 7 and Windows 8 or 8.1 drivers that causes the spooler to crash with the following HP Deskjet printers:
Deskjet 710
Deskjet 712
Deskjet 720
Deskjet 722
Deskjet 810
Deskjet 812
Deskjet 820
Deskjet 822
Deskjet 1000
The attached file contains a patch for this issue for Vista and Windows 7.
[The patch does not currently work for Windows 8 or 8.1 x64 systems. There are some efforts to address this, if a solution is developed it will be posted here. {Edit - I have not made any progress in getting the patch to work in Windows 8 x64.}]
First make sure the driver for the printer is installed. If the driver has not been installed go to Start, Devices and Printers, Add a Printer, Local Printer, choose the proper port (for USB-Parallel converters the port will likely be USB001: or perhaps USB002: ), Next, click Windows Update then choose HP for the manufacturer and select the appropriate printer.
Apply the patch as follows: Log into the computer with an administrative account. Download the patch by clicking on this link or on the paper clip at the end of this post. Save the patch file to your computer, then unzip it. Next copy the three DLL files to the following directory: %windir%\system32\spool\drivers\x64\3
Note that %windir% is a system variable that points to the location of the Windows directory. For most systems this will be C:\Windows. You can click Start, Computer and type %windir%\system32\spool\drivers\x64\3 in the address bar and it will find the right place.
This can be done from a DOS prompt if DOS is opened with the "run as administrator" command, or from explorer with a copy and paste. Depending on your UAC settings you may need to provide confirmation. Also allow the current files to be overwritten if prompted.
This patch is not required and should not applied to a 32 bit version of Vista or Windows 7.
Thanks to extraordinary Microsoft engineer Alan Morris for guidance for the patch.
Update - the following are more detailed installation instructions:
Download the patch from here. Now click on the file and open it, then extract the patch to some directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative DOS prompt by clicking on Start, All Programs, Accessories, then right click on CMD.EXE and select Run as Administrator. Click in the DOS box then type the following:
MD c:\temp
CD \temp
Now extract the patch files into the c:\temp directory (extract all, chose c:\temp as the destination).
[Update - Windows security settings may prevent these files from being used, please open Computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties. If there is a message in Properties indicating the file was downloaded from the internet and may be blocked then unblock the file before proceeding.]
Next click back in the administrative DOS prompt and type the following: (stuff in green is comments, do not type them...)
DIR *.dll (this is just to verify the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others.)
Net stop spooler (makes sure the files are not in use.)
Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)
Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)
Copy hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000)
Net Start Spooler
Exit
[Edit - note that these DLL files will already be in the directory. You will get a warning asking if it is OK to overwrite the files, say "yes".]
At this point the patch is installed and ready to print.
Note that the printers here do not support USB connections, they have only parallel ports. [Edit - if your printer does have a parallel port use it, this will likely be much less problematic than using a USB-Parallel converter.] If you use a USB-parallel converter make sure it is supported in your operating system. The following posts are flagged with USB-parallel cables that are reported to work in Windows 7.   A driver is required for the USB-parallel converter in addition to the driver for the printer. For supported converters this is typically supplied automatically in Windows 7. Note: the proper port to select for the USB-Parallel converters is often USB001:. I have heard of some cases where the port was USB002: or LPT3: as well. If the port you are using does not succeed (after applying the patch) try changing the port by going to Start, Devices and Printers, right click on your printer and select Printer Properties, then click on the Ports tab.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
This question was solved.
View Solution.
Attachments:
DJ_Patch.zip ‏34 KB

Just want to send a thanks. Purchased a new HP computer with 64 bit Windows 7 and haven't been able to get my 722c to work. This patch worked like a charm!

Which version of oracle developer suit is compatible with windows 7 32 bit

Can somebody plz let me know which version of Oracle Developer suite is compatible with windows 7(32 bit).And plz tell me the link through which i can download this.I want to download this software for making practice of Oracle Forms and Reports by installing it at my PC.
i had downloaded ds_windows_x86_101202_disk1.zip from Oracle's site but while installing it it showing the error msg in the log as-
Using paramFile: C:\Users\USER\AppData\Local\Temp\install\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 6.1
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files\Oracle\Inventory\logs\installActions2012-08-13_03-14-21PM.log
Please press Enter to exit...
Please provide me some solution for this---

Oracle Developer Suite (ODS - Forms 10g) 10g R2 (ds_windows_x86_101202_disk1.zip) is not certified on Windows 7, however it will work. Oracle has certified Forms 11g (Fusion Middlware 11g R2) for Windows 7 (32 and 64 bit).
You can make ODS work on Windows 7, but you have to change a few things before installing to make it work.
Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 6.1Failed <<<<>
This is a fairly common bug (not just with Oracle). The Oracle installer was written to check for a specific version of Windows rather than check for a minimum version of Windows.
Fix 1: Right-click the Oracle setup.exe and select Properties and then click the Compatibility tab and select "Run this program in compatibility mode for: Windows XP SP3".
The Oracle installer also is unable to check the amount of Virtual Memory (VM) available when the VM is set to "System Managed."
Fix 2: Open the System Control panel (Start => Control Panel => System OR press Windows Key and Pause Break key). From the System Properties window, click the Advanced tab and click the Settings button under Performance. Change the Virtual Memory settings to 2048mb min and 4096mb max. Then save and restart your computer. See Microsoft - Change the size of virtual memory for more information on changing the VM. (Note; after the installation is complete, you can - and should - change the VM settings back to System Managed.)
Lastely, the Oracle installer is not designed to work with the Windows 7 User Account Control (UAC) functionality.
Fix 3: Right-click Oracle setup.exe and select "Run as Administrator".
Done, now you are ready to run the Forms 10g setup again.
As I mentioned above, Forms 11g is certified with Windows 7 and is also the only supported version available so you might want to skip Forms 10g and go straight to Forms 11g. For this you will need to download and install WebLogic Server (WLS) 10.3.5 and Fusion Middleware (FMw) 11g R2. Install WLS first, but do not run the configuration at the end of the installation. Then install FMw and run the configuration during this installation. Also, you will want to run both installers "As Administrator".
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Oracle 11G database for 64 bit windows installation error

Hi,
I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005). Please help. Thanks for your time and help.

Adipur wrote:
Hello, have you tried to create new administrator user, and install using that newly created user...?You found this to be a band-aid solution in your specific instance. (Strange case of installation on windows 7 - unable to complete installation But you have drawn the wrong conclusions and never found the real issue in the cited thread. Under the circumstances, I would not be offering this up as a generalized solution, as you are doing in this thread and in others:
Re: Oracle 11G database for 64 bit windows installation error
Re: Trouble installing Oracle Personal in Windows 7 64-bit environment
I have been doing Oracle DBA work since v 7.3, and have never seen advice like this to be anything more than a work-around the real issue.
Edited by: EdStevens on May 15, 2013 7:03 AM

HT204074 I have a family Apple ID for iTunes and Apps and then two iPhone 5s each which use a personal Apple ID for email and the family Apple ID for iTunes and Apps. Can I use iTunes Match?

I have a family Apple ID associated with my iMac and iPad for iTunes and Apps and then two new iPhone 5s each which use a personal Apple ID for email and the family Apple ID for iTunes and Apps. Can I use iTunes Match on the iPhones given there are two Apple IDs "loaded" on the iPhone?

Hi Monkey_Dawg,
Welcome to the Support Communities!
The articles below may be able to help you with this.
Click on the links to see more details and screenshots.
iTunes Store: Subscribing to iTunes Match
http://support.apple.com/kb/ht4914
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Cheers,
- Judy

Is Oracle 11g released for NW04s and ECC6.0?

Is Oracle 11g released for NW04s and ECC6.0?
Please help. Thanks!

Plain and simple: No, it isn't.
Check the SAP on Oracle homepage [here|SAP on Oracle] in SDN and read the latest development news on this topic including a rough schedule.
regards,
Lars

Which are the latest business packages for ESS and Mss?

Hi all,
Which are the latest business packages for ESS and Mss?
Regards
Rajendra

Hi rajendra
It's all about R3 version, which R3 version u used?
the following BP are available for ESS/MSS on service.sap.com u need sid-password to download it.
R3 4.6C/4.7 Enterprise
ESS: - Business Package for Employee Self-Service 4.6C - 4.7 50.4
https://websmp102.sap-ag.de/~swdc/011000358700005104712004D/BPESS46C504_0-20000613.ZIP?_ACTION=DL_DIRECT
MSS: - Business Package for MSS 60.1
https://smpdl.sap-ag.de/~swdc/012002523100003529452006D/BPMSS601_19-20001489.zip?_ACTION=DL_DIRECT
ERP2004: - (R3 ECC 5.0)
ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
https://smpdl.sap-ag.de/~swdc/002007974700000167412004D/BPERP4ESS0_0-10003146.zip?_ACTION=DL_DIRECT
MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
https://smpdl.sap-ag.de/~swdc/002007974700000246072005D/BP_ERP4MSS0_2-10002991.zip?_ACTION=DL_DIRECT
ERP2005 : - (R3 ECC 6.0)
ESS: - BP ERP05 ESS 1.0 Support Package 03 ( Up to SP5 available)
https://smpdl.sap-ag.de/~swdc/012002523100000076042006D/BPERP5ESS03_0-10003288.sca?_ACTION=DL_DIRECT
MSS: - BP ERP05 MSS 1.0 Support Package 03 ( Up to SP5 available)
https://smpdl.sap-ag.de/~swdc/012002523100000076062006D/BPERP5MSS03_0-10003289.sca?_ACTION=DL_DIRECT

How to dual install Vista and Windows 7?

Hi,
I have a question about setting up windows 7. But Im trying a slightly different approach. I have a drive on my Mac Pro that has Windows Vista on it. But I would like to put Windows 7 on it too. I dont know if i have to partition the drive to do this or can i just install it along side Vista? Thing is before i installed Vista I used disk utilities to partition the drive to 2 equal partitions but when I went on it to put Vista on it somehow Vista took the whole drive. So i have Vista on there and all set up but now I'd like to add Windows 7 without destroying Vista...How can I do that? Do i have to use the Mac OS and partition it and install or is this something I should do from the Vista side?

None. You have everything you need.
Windows 7 DVD
Vista
And if you want another Paragon CampTune for resizing partitions.
For backup, Vista, no need to buy Paragon or Acronis. WinClone is free and handy too.
Trouble with Macs, or any computer, there are always different ways to get to same place.
Backup, and then try, that is all anyone can do. I had Vista SP1 for work, Vista SP2 beta for testing, and Windows 7 beta to give it a shot, and I like W7 better.
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0

Why is the connectionUri different in WSManConnectionInfo object for exchange and windows?

For exchange the connection uri used is :
'http://machineName/powershell'
The WSManConnectionInfo object is created in the following way:
WSManConnectionInfo connectionInfo = new WSManConnectionInfo(new Uri("http://machineName/powershell"), "http://schemas.microsoft.com/powershell/Microsoft.Exchange", ExchangeCredential)
To connect to windows, the uri used is
'http://machineName::5985/wsman '
The WSManConnectionInfo object is created in the following way:
WSManConnectionInfo connectionInfo = new WSManConnectionInfo(new Uri("http://machineName:5985/wsman"), "http://schemas.microsoft.com/powershell/Microsoft.PowerShell", credential);
Why is there a difference in the connection uri for exchange and windows?

Hi Cmm user,
You can refer to WSManConnectionInfo Constructor (Uri, String, PSCredential) to understand.
uri: The URI that defines the connection endpoint where the remote runspace is opened.
shellUri: The URI of the shell that is launched when the connection is made.
credential: A
PSCredential object that contains the user account that has permission to make the connection.
For connection to Exchange server, please refer to this article to understand:
How to: Get a list of mail users by using the Exchange Management Shell in Exchange 2013:
http://msdn.microsoft.com/en-us/library/office/ff326159(v=exchg.150).aspx
For connection to Windows server, the uri is as the ConnectionURI, which Specifies the connection endpoint. The format of this string is:
<Transport>://<Server>:<Port>/<ApplicationName>
I hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do I extract 1 page of a pdf file? How do I send that as a original for mac and windows users?

How do I extract 1 page of a pdf file? How do I send that as a original for mac and windows users?

This is not really a Numbers question. I will provide an answer but suggest you make the question relavent for the forum where you post.
1) Open the PDF in Preview
2) select the menu item "View > Thumbnails"
3) select the page you wnt to share
4) copy (by using the key combination <command> + c OR select the menu item "Edit > Copy"
5) select the menu item "File > New From Clipboard"
6) save as a new name
7) share the new file

CD different for Linux and Windows

I have in hand a very strange CD. This is an (old) CD with drivers for a Samsung printer. The CD has drivers for Linux and Windows. But if I mount the CD in Linux, I see only the Linux driver and if I access the CD from Windows, only the Windows drivers are seen. How they can do that ? How can I mount in Linux the CD in order to see the content seen from Windows ?

In Windows ( DIR D: )
Le volume dans le lecteur D s'appelle SAMSUNG_LBP
Le numéro de série du volume est C432-A954
Répertoire de D:\
28/02/2005 00:53 <REP> ACROBAT_READER
26/10/2004 06:11 740 AUTORUN.INF
28/02/2005 00:53 <REP> DATA
28/02/2005 00:53 <REP> ML-1610
28/02/2005 00:53 <REP> Manual
09/12/2004 03:55 11 219 SETUP.DAT
20/09/2004 07:29 270 336 SSAuto.Dll
17/09/2004 08:03 253 952 SSEtc.dll
22/09/2004 11:09 225 280 SSFcs.dll
12/03/2004 05:59 1 622 016 SSRes.dll
17/09/2004 08:04 155 648 SSTtp.dll
26/10/2004 05:42 307 200 Setup.exe
28/02/2005 00:54 <REP> USB
8 fichier(s) 2 846 391 octets
5 Rép(s) 0 octets libres
In linux (ls -l -F /mnt/cdrom)
total 44
dr-xr-xr-x 22 root root 4096 Feb 28 2005 Manual/
-r--r--r-- 1 root root 2555 Feb 28 2005 README.txt
-r-xr-xr-x 1 root root 51 Feb 28 2005 autorun*
dr-xr-xr-x 3 root root 2048 Feb 28 2005 bin/
dr-xr-xr-x 8 root root 2048 Feb 28 2005 cups/
dr-xr-xr-x 4 root root 2048 Feb 28 2005 data/
dr-xr-xr-x 3 root root 2048 Feb 28 2005 help/
-r--r--r-- 1 root root 8517 Feb 28 2005 icon.xpm
dr-xr-xr-x 9 root root 2048 Feb 28 2005 locale/
dr-xr-xr-x 2 root root 6144 Feb 28 2005 misc/
dr-xr-xr-x 3 root root 2048 Feb 28 2005 ppd/
dr-xr-xr-x 2 root root 2048 Feb 28 2005 scripts/
dr-xr-xr-x 4 root root 2048 Feb 28 2005 setup.data/
-r-xr-xr-x 1 root root 6603 Feb 28 2005 setup.sh*
ouput of isoinfo -d dev=dev/sr0 (in linux)
CD-ROM is in ISO 9660 format
System id: LINUX
Volume id: SAMSUNG_LBP
Volume set id:
Publisher id:
Data preparer id:
Application id: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
Copyright File id:
Abstract File id:
Bibliographic File id:
Volume set size is: 1
Volume set sequence number is: 1
Logical block size is: 2048
Volume size is: 239152
Joliet with UCS level 3 found.
SUSP signatures version 1 found
Rock Ridge signatures version 1 found
Rock Ridge id 'RRIP_1991A'
If I use on Windows the Windows port of cdrtools; then these tools behave as in Linux, showing me the Linux contents. In Linux I can also mount -t udf and then I see:
total 32
-rw-r--r-- 1 root root 32768 Feb 28 2005 Desktop DB
-rw-r--r-- 1 root root 0 Feb 28 2005 Desktop DF
drwxr-xr-x 1 root root 22 Feb 28 2005 Manual/
This was for a Samsung ML-1610 B/W laser printer. This is crazy.
@lolilolicon That explain the result when I mount -t hfs. But the difference in Linux and Windows remain mysterious. How Windows "mount" the CD? I believed it was the equivalent of mount -t iso9660 in Linux but apparently, it is not.
Last edited by olive (2011-09-08 12:12:16)

I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix

I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix.
Why after 6 year's this has changed?
I would like to open PDF's straight from Window Mail.

Good day Jeff.
I am running most current Adobe Reader X.
Tks Mark

How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

How do I convert my Windows 7 Folder to an ISO image to burn to my USB Flash drive (16GB) in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

Sorry - confusing - My question has NOT been solved yet - can anyone help?

Which edition of Oracle is certified for Vista and Windows 7?

Similar Messages

Maybe you are looking for