Which email clients work
Hi,
For years I used Apple Mail using Mac OS10.68 as my default mail program for sending pdfs directly from the pdf panel. I am having trouble with Apple Mail (this issue has nothing to do with sending pdfs) and have tried several other email clients - thunderbird, postbox, opera with Acrobat and none appear to work. Can someone suggest an email client that works the pdf panel?
Thank you,
Meryl
Hi Meryl,
What version of Acrobat / Reader are you using?
You can use any of the email clients listed above.
Try the step mentioned in the thread : http://forums.adobe.com/message/5784474
Regards,
Rave
Similar Messages
-
Which email client / solution do you use?
I was wondering what email client is everybody using out there. Just got a new computer and am setting up arch on it. I've used evolution, thunderbird, and elm and pine (way back in the day). I'm a recent KDE convert from gnome (no thoughing rotten veggies please and was wondering what experiences people have had with kmail. Also, it seems that thunderbird is the only one with build in spam filtering. I got inordenate amounts of this stuff so that was nice while i was using. I used to do the whole fetchmail / procmail / spamassassin / sendmail thing when i was using redhat. Anyway, just wondering if anybody had any suggestions and what works best form them?
scottro wrote:
hrrm--the obvious questions, do you have the browser set up in the configuration file?
It may just be in sylpheed-claws (which is what I have in FreeBSD.
The command (in the "other" section of Common Preferences is
opera -remote 'openURL(%s, new-window)'
Again, this was Sylpheed-claws. However, I vaguely remember that it would work, you'd just have to click a few times.
HTH
Scott
Ah yes, I suppose i should use claws instead. But thats not in pacman. Bah. Oh well -
WRT5GL: email client works, browsers do not
I have managed to configure my wireless router so that I can read and write email via Groupwise email client, but I cannot get a web browser to work. I had the same issue when I set up the DSL, and it was not resolved until I changed the settings of the preferred and alternate DNS server addresses under DCP/IP.
I have a WRT5GL hooked up to a Zyxel P600 series modem, with Earthlink DSL service. As far as I can tell, the modem uses PPPoE, so the router should not (when I initially tried PPPoE, I was not able to connect when using a hardwired desktop). I'm using DHCP with a local IP address set to 192.168.2.1 so that it doesn't conflict with the modem, and once again I am able to browse with a desktop connected to the router connected to the modem. I also cloned the MAC address.
I'd appreciate suggestions for what to try next. Thanks!The cloning of a MAC address will not help you here .
what i suggest you do is first verify if you are able to ping any website eg :- ping www.yahoo.com, do you get replies ? if yes and if you are using windows Xp sp2 ,run the following command in the command prompt
netsh winsock reset catalog .\
let me know if this work, or else post a few more details. -
Which oracle client works with both Oracle 11.2.0.2 and BizTalk 2006 R2
Hi there
My Oracle11.2.0.2 is installed on linux server. My Biztalk2006R2 is installed on Windows Server 2003 R2 x64. I have already installed BizTalk Adapter for Oracle on the Biztalk server and now require to install Oracle Client to make Biztalk able to retrieve data from Oracle11.2.0.2 using the oracle client.
From the following link,
http://msdn.microsoft.com/en-us/library/aa559822%28v=BTS.20%29.aspx
I came to know that the only oracle clients compatible with Biztalk adapter for oracle are as below:
1) Oracle client 8i
2) oracle client 9i
3) oracle client 10i
Now I need to install an oracle client on biztalk server in order to make biztalk talk to oracle and retrieve data from it.
Question1: which of the above clients should i install on biztalk server that is compatible with both Oracle11.2.0.2 as well as Biztalk server 2006 R2?
Question2: How to install and configure this client to make it work correctly?
Please help.. thanks.
Edited by: manibest on 19-Dec-2012 03:27
Edited by: manibest on 19-Dec-2012 03:27The Biztalk Adapter interface with Oracle software has information, requirements per referenced document that does not make sense.
E.g. "10i" does not exist and the requirement "Oracle ODBC driver 9.2.0.5.4" means that only 9.2 Client can be used. (Mixing parts from one Database Client product version with another version is not allowed/supported/certified.)
Btw, does that machine happen to have Itanium hardware? (probably no, since you stated x64)
For Oracle's OS requirements, 2003 was certified with/from 9.2.0.3 (and likely also terminal patch set version 9.2.0.8). Not sure about Server 2003 R2, 32 or 64-bit. I'm pretty sure 10.2 was certified on 2003 R2, but the note likely refers to 10.1 versions (before it was known it would be labeled 10g, g for grid replacing the i ).
This FAQ may have some more information: http://www.oracle.com/technetwork/database/windows/faq-100614.html
For Oracle client - server interoperability and certification, there's a support matrix on MOS. See doc id 207303.1.
It seems 9.2 is supported on the wire to operate with 11.2 server, but Client with at least patch set 9.2.0.4 is required.
So, I guess best bet is to find updated requirements.
If you manage to get hold of 9.2.0.5, after verifying that 2003 R2 is ok, then it looks like the puzzle could be put together for a complete picture.
For ease of install, take a look at the Instant Client. (However, there's no 9.2 IC, that type of client install came later)
http://www.oracle.com/technetwork/database/features/instant-client/index-097480.html
Edit;
some corrections, specially about 9.2 version
Edited by: orafad on Dec 19, 2012 10:58 PM -
Hello all,
we must connect to a oracle7 server from a linux box.
I can't connect to the oracle7 server with the Oracle client 9/10/11...
Can I use, for example, the "Oracle 9/10 client"?
Some forums entries says, that this was not possible.
JDBC THIN driver works from several client versions, so I'm a little confused;()
Any hint?
Best regards
AndreHello Nigel,
thanks for your hints!!!
OCI doesn't work like JDBC - so compatibility matrix is different. There was a major change to OCI - around version 9 time?May be, I need a Client for oracle7.3 server...
Where can I download the correct client for this version (C/C++ Linux)?
Is there anywhere archived? On oracle.com I found only client packages for Version 9 and above;()
From OCI Programmers Guide 10g: The server versions supported currently are found on Oracle iSupport in note 207303.1. See the URL
http://metalink.oracle.com/
From the 9.2 Migration Guide: For OCI, Oracle7 client software can run against a release 8.0 or higher Oracle server, and release 8.0 and higher client software
can run against an Oracle7 server. Hmm, should work with simple calls. I can't connect with sql_plus to the oracle machine, may be there is a wrong configuration...
If a release 8.0 or higher client is running against an Oracle7 server, then the application cannot use features available in
release 8.0 and higher, including object capabilities.
I believe you may have a problem if you use version 9 style OCI calls rather than the version 7 style. See Upgrading your application.I will use the correct client for oracle7.3, but where can I download them???
We haven't a "Support Identifier", so I can't register me on "metalink.oracle.com".
Best regards
Andre -
Make email clients work behind NTLM proxy
I am behind a crappy windows proxy server. So I have cntlm installed, and 127.0.0.1:3128 is the proxy I have set for all the applications I use,
But thuderbird, evolution, or mutt, none of them are working with this proxy settings. Please dont suggest SSH tunnelling or other methods in which I need to keep another connection at my home up and running.
[root@aura-envy jay]# nmap -sT -O 172.16.19.10
Starting Nmap 6.47 ( http://nmap.org ) at 2014-12-24 16:13 IST
Nmap scan report for isa10.mahe.manipal.net (172.16.19.10)
Host is up (0.0070s latency).
Not shown: 999 filtered ports
PORT STATE SERVICE
80/tcp open http
Warning: OSScan results may be unreliable because we could not find at least 1 open and 1 closed port
Device type: general purpose
Running: Microsoft Windows 2003
OS CPE: cpe:/o:microsoft:windows_server_2003::sp2
OS details: Microsoft Windows Server 2003 SP2
OS detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 8.46 seconds
It doesnt say 443 is open. But https works. Not sure how that works. Could anyone tell a little on that too?
What are the other ways to fix this ?
Thanks!I am behind a crappy windows proxy server. So I have cntlm installed, and 127.0.0.1:3128 is the proxy I have set for all the applications I use,
But thuderbird, evolution, or mutt, none of them are working with this proxy settings. Please dont suggest SSH tunnelling or other methods in which I need to keep another connection at my home up and running.
[root@aura-envy jay]# nmap -sT -O 172.16.19.10
Starting Nmap 6.47 ( http://nmap.org ) at 2014-12-24 16:13 IST
Nmap scan report for isa10.mahe.manipal.net (172.16.19.10)
Host is up (0.0070s latency).
Not shown: 999 filtered ports
PORT STATE SERVICE
80/tcp open http
Warning: OSScan results may be unreliable because we could not find at least 1 open and 1 closed port
Device type: general purpose
Running: Microsoft Windows 2003
OS CPE: cpe:/o:microsoft:windows_server_2003::sp2
OS details: Microsoft Windows Server 2003 SP2
OS detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 8.46 seconds
It doesnt say 443 is open. But https works. Not sure how that works. Could anyone tell a little on that too?
What are the other ways to fix this ?
Thanks! -
How can i choose which email client safari uses to email web pages?
Right now it tries to use gmail (google chrome symbol). When i click on the arrow, next to the address bar, the google chrome symbol appears next to the option email this page. If selected, it then opens google chrome on the gmail sign in website.
Nevermind I found out that my email reader was changed to google chrome, within my mail preferences.
-
Anyone Have an stand alone email client which works Well?
I am looking for an email client which work well with my old POP3 email account.........I have looked at Post Box, MailSteward, others........any ideas much appreciated.
Thunderbird!
-
Hi
I give up. I just cannot see my exchange inbox in Mail after installing Mountain Lion. My mail is not being deleted. Its still in my inbox I just can't see it. I've tried everything suggested on the forums and nothing is working for me.
My productivity has completely stalled and I really need to move to an email client that is going to work seamlessly with Mountain Lion.
Any recommendations?endobrendo wrote:
I have the same problem. Upgraded to ML, and my Mac Mail suddenly can't communicate with Gmail's SMTP server.
I have been having the SAME problem with ALL my Gmail accounts with Mail.app - It is very annoying, especially when you have clients and other important email to respond to. So you're definitely NOT alone in this department.
Might have to go back to Thunderbird or something until this gets fixed, which is going to really suck because I have 5000+ emails along with all my Email Folders in Mail not too mention the Rules I have had setup for years!
AND with the RSS Feeds NOT working in BOTH Mail and Safari! That was a HUGE MISTAKE and defintely a STEP BACKWARDS on whoever's idea that was for sure! -
Using Outlook as default email client doesn't work in one important way
I'm using Outlook 2011 as my default email client, and have set it in all the places I can, as the default email client. It works as I want in almost every place - eg clicking links in websites opens an Outlook email - so that's great.
BUT I often want to right-click a file and send as an email attachment. Using 'Compress and Email' or just plain 'Email' (added by customising the context-menu) opens up Apple Mail - which I haven't even set up. This is very frustrating, and makes the job of sending a file by email direct from within the Finder much more clumsy.
Any ideas on how I can invoke Outlook in this way will be much appreciated, thanks.
JeffSorry guys... I'm a recent mac-switcher, and was immediately frustrated by the (apparent) lack of features in the Finder. Sorry! Now I'm utilising Pathfinder, which I have come to love - and of course those context menus are in there, not in Finder. So it seems likely that the problem lies within the Pathfinder app, rather than OSX. Your comments have illuminated the blindingly obvious for me. Sorry!
As a matter of interest; how do YOU quickly email a file out, when you've located it in a Finder window?
Thanks -
All other internet connections work - but the Mozilla email client can't access the mail... Works in every other café. But not here. Thanks!
I'd suggest you check with the cafe owner which ports are allowed there.
If in doubt simply use webmail, which will most likely work. -
Does threading work for email notifications in your email client?
Hi everyone,
We're trying to get a pulse from the community on what email clients and platforms you guys are using, especially in the case where the threading of email subscriptions isn't working. I have heard that threads can be grouped in Entourage on a Mac.
Can anyone Mac/Entourange users confirm this?
Would appreciate everyone's input on what mail client/OS you are using and if threading works for you or not. I know for the majority of you it isn't working, and we're looking at ways this can be addressed.
Thanks!
Here's the first entry: I use Microsoft Outlook on Windows XP and my email notifications don't thread.I think there is some confusion here on what is to be considered
threading and what isn't. Since I may have been causing some of that
confusion by not being as exact as I could have been in my many rants
about the subject, allow me to attempt to clarify a bit.
First, lets start with a sequence of messages to define a topic (I am
trying to avoid the word thread here). Somebody starts a topic with
message A. The first reply to message A is message B. The second reply
to message A is message see. In flat view the topic will look like this:
A
B
C
In threaded view it will look like this:
A
-- B
-- C
Now somebody is going to reply to message B in the topic. In flat view
this will look like:
A
B
C
D
In threaded view this will look like:
A
-- B
---- D
-- C
Strictly speaking only such a tree-like view is considered threading.
For instance what Gmail does is not strictly threading (more about that
later). Threading works because every email message has a Message-ID
that is a unique identifier of that message. When an email client
replies to a message it will create a new unique Message-ID for that
message, but it will take the Message-ID from the original and put it in
the References header so email replies have a pointer back to the
original message. If a threading email client receives a message with a
References header and it also has the email message to which that
References header points, the email client will show that message as a
child of the original. (This is still somewhat of a simplification and
skips over multiple IDs and the In-Reply-To header, for the exact
working see RFC 2822 section 3.6.4.)
This is what the whole Mozilla family of email clients does and most of
the old school Unix email clients as well.
What Gmail does (and what you can configure many email clients to do) is
to group messages by subject. Such a group of messages is in Gmail terms
a conversation. Then within that conversation messages are sorted by
date. This is different then threading. If a Gmail user had read
messages A, B and C of our example above and then navigated away, upon
returning to the conversation he will not find message D on the third
position in the conversation, but on the fourth. I think we should (and
I will try to remember to) refer to this behaviour as grouped display,
and not as threaded display.
Now, how can we use this to fix these forums?
The first part is simple: just add a References header to all outgoing
email. Only email clients that are configured to thread will do
something with that, so it will fix threading for those who want to use
threading without breaking anything for the email clients that don't
want to thread.
The impact of this on the Jive advancedemail plugin should be minimal.
Every outgoing email should just set its MessageID to the ID property of
the outgoing ForumMessage then test for the value of the parentMessgeID
property and if it is present set the References header. Append
@mail.forums.adobe.com to all IDs and you are done.
This will not fix the issue for the email clients that use grouping. To
(mostly) fix it for them, the simple solution is to just move the unique
code in the subject line forward until it appears before the "Re: " in
the subject. Email clients that use grouping are aware there might be an
code in the subject to indicate a message is a response (in English
usually "Re: ", other languages use something like "antwoord: " or
"resp: " etc.). They will group based on what is in the subject after
the "Re: " so that will put all the replies together.
It may not entirely fix it though, since the first message in a topic
doesn't have "Re :" it might be you end up with 2 groups, one with just
the first message and one with all the answers.
I already tested this and the Jive email import functionality does
support the code being in a different position, so it is just the
sending part that would need to be modified.
This does have a huge downside for the email clients that use neither
threading nor grouping (such as webmail clients like Squirrelmail and
IMP). If you use such a client and do a simple sort on the subject now
it will sort more or less correctly. If the code moves forward the
sorting there will disappear.
The last and final step / option is to change the Jive email import
functionality not to depend on that code but instead to depend on the
References header that an email client will put in the reply. That is a
significant change on the Jive side (and if Jive is going to do that I
have more suggestions to improve their core email system). Then
everybody can thread, group and sort however he likes, but Jive would
need to define a backup strategy for messages where an email client
fails to include a References header.
Jochem
Jochem van Dieten
http://jochem.vandieten.net/ -
IOS 6.1.4 - Apple Native Email Client - Push Notification is not working
Hi, I just upgraded to IOS 6.1.4 this morning no issues Upgrade went well.
Now My Email Push Notfication is not working.
1. Bussiness Gmail Account - Configured as Exchange
2. Hotmail Account - Configured as Exchange
Both Account - Push is ON
if some one send email i am not getting it. I have to manually open the Native Email client then i can see.
Restarted the IPhone Twice.
Any one facing similar issue?1. Removed the Email Account and Added again - Problem Presist.
2. Erase All Content - Restored from previous Backup - No Luck
3. Again Erased All Content - Setup as New Phone - Just add Gmail Enterprise Email Account - Not Working.
Surprisingly - Icloud / Hotmail PUSH Notifications works Fine.
I have removed all My Devices from the Google Apps Administrator page and re-requeste for new deivce and then tried all the above still same Issues.
Now what?
Any one experiencing this issue? -
Can't sign in using any 3rd party email client with my iCloud account on any Mac or any other Mac. My iCloud will only work with Mail.app. All the clients I tried work perfectly well as long as I sign in with somebody else's iCloud account. But mine won't work no matter the client (Postbox, Unibox, Airmail...) and no matter the computer.
I can access my account on iCloud.com, but I can't use email clients without getting error messages prompting me to check my password or login.
I was able to use those clients in the past but a couple of months ago I got logged out of Airmail and the issue started just like that!
I tried every possible mail server settings including the following:
IMAP information for the incoming mail server
Server name: imap.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 993
Username: The name part of your iCloud email address (for example, emilyparker, not [email protected])
Password: Your iCloud password
SMTP information for the outgoing mail server
Server name: smtp.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 587
SMTP Authentication Required: Yes
Username: Your full iCloud email address (for example, [email protected], not emilyparker)
Password: Your iCloud passwordThose are the correct settings, and they work with any email client that supports Imap.
Try again. -
I used to have a problem with Acrobat Pro X not recognizing Mac Outlook as my email client when using the 'SHARE' function under Acrobat Pro X . Then it was fixed and worked most of the time, although I occasionally had to go back and select Outlook as my default email in Preferences. However, I recently upgraded from Mac OSX Mtn Lion to Mavericks, and now it does't work AGAIN. It hangs up my Acrobat, Causing a Force Quit every time I try this! Very frustrating. I know I can just attach it to an email from my desktop, but it would be nice if the "Attach to Email" function in Acrobat actually worked. BTW, I am using Acrobat Pro X 10.1.10.
I, too am wondering if it's the download site. I am not aware of any way to download Outlook Mac 2011 alone from any site including Microsoft's.
It is common for unscrupulous sites to offer desirable but pirated software for a modest price, but serve it up with a dose malware. They get you money, possible a credit card number, your e-mail, your IP address, and all you get is pain.
There was an "Outlook Express" for Mac that was freely distrubuted but I'll pretty sure that it never ran natively under OSX. The first OSX native version fo Office:Mac was Office X, and it introduced Entourage as the Mac mail client.
IF Fast Hosts is your ISP, I'd certainly talk to them to figure out what you downloaded.
Maybe you are looking for
-
Problem with iWeb 1.1 photos solved... for me, at least
After updating, some of my photo pages were broken. Slideshow wouldn't work and clicking on a photo would not open a larger version. Some pages, however, did work. After hours of trying to figure this all out, I finally narrowed the problem down. If
-
Hi guys. Im sorry this is so long but please read! this is getting quite frustrating but my phone is out of space capacity. HOWEVER, it has been like this for the last 2 months and it still has worked fine, and i am able to save pictures by taking th
-
Why can't modify the vlan aging time
4506-1#sh mac add aging-time Vlan Aging Time Configured Aging Time Global Vlan Admin Age: 300 1 300 300 100 300 300 300 300 300 500 300 300 501 300 300 502 300
-
Please help to select data by my condition?
Hi everybody, I have a problem that I cannot resolved it, so I want to helped to write SQL. I have a records set as following: No. | Name | Quantity | GroupId 1. John 5 1 2. Henry 3 1 3.
-
I'm trying to download apps on to my IPAD 2. I press the install button and it appears to download but it never does. Help! I've already updated the software to 6.0.1 and restarted the ipad as well as pressed the "update all" button for my apps.