Which expansion slots are which.

I am looking to add more firewire 800 and USB 2.0 slots and am wondering which slots are which.
I tried speaking to the technical department at Apple but they could not confirm exactly (amazing really, kinda makes you wonder why they have a technical dept LOL)
I have a new Mac Pro Intel 2 x 2.8 there are four slots
Slot 4 x 4 (nearest the top of the mchine when upright)
Slot 3 x 4
Slot 2 x 16
Slot 1 x 16 (used by the Nvidia 880 graphics card)
I will be adding another graphics card so I assume I will need to use the x 16 slot but my question is, are the other two x 4 slots PCI express.
How do I check how many watts I am pulling, I understand I need to keep within the 300 watt max.
I won't be using the other graphics card very often, it's going to be connected to a 40" Sony LCD for slideshows when clients come round.
I am thinking about adding an sata card in one of the slots and a firewire800/usb 2.0 in the other slot.
Does this sound ok to people?
(if anyone has particular suggestions as to which internal cards to get, I would be more than happy to take some advice)
Thanks Guys.
Jason

I have spoken with them again and got someone who knew what they were talking about this time.
It seems that all 4 slots are PCI Express but the two x16 slots would have to be used for the graphics cards as I suspected.
I will look at firewire800/usb 2.0 for the other slot and maybe an eSATA card for the last.
Would I be better to connect my lacie external drives to the eSATA or the firewire 800?
The sonnet Tango 800 Express sounds good with 2 USB and 2 FW800 externals and maybe another card with 2 eSATA connections.
Suggestions welcome.
Thanks.

Similar Messages

Which PCIe slot for gphx card?

Hey all:
I have had a problem with my mac pro 2006 rebooting spontaneously. I thought it must be the graphics card and finally pulled the graphics card out and left the mac pro on for a while to see if it would reboot. It didn't. It was solid. No graphics card = no problems, so I assumed it was the graphics card.
So, I decided to swap out my x1900 with a 4870. It's rebooting. I guess this has to do with power to the logic board or something. I have no idea, but I'm super frustrated since this thing isn't under warranty.
I decided to put the graphics card (the new 4870) in the 2nd to bottom PCI slot, rather than the bottom slot. I got a message on startup from the PCI Expansion Slot Utility: http://twitpic.com/2k2jeh
So, things seem to be stable (but I am not counting on it). Is my 4870 not running at full speed in the second slot? I'm not an expert in how the PCI slots are set up, and I'm trying to understand.
I decided to swap

I found this : http://support.apple.com/kb/HT2838
Slot two is 1x + 16x rather than "slot - one" which is just x16... so since slot two has that extra x1 I guess the 4870 cannot perform to its fullest, but pretty close?
I have a suspicion that something in the PCIe slot 1 chain may be broken?... like the power or something? I'm going to lower my fan speed down from 1800 RPM and see if it blows up. It probably will.
Anyone think I just need a new Power Supply, or maybe a new logic board?... how much do those things run? And if I call in on an unsupported system what sort of pricing is it for replacement parts like this? Bad?

K7n420 which memory slots?...

Hi,
I am a bit confused.
Till now i knew that after bios v2.2 and above the best combination for Dual DDR operation in the k7n420 (nforce) was 2 sticks of memory put in slots 1&2.
Recently, i have learned from lowrider that he is getting the best results with slots 1&3 occupied!!! ?( ...
Richard, what is going on here?
What is the official word of MSI about this matter?
I am running bios version 2.7 and am utilizing 2X512MB PC3200 memory sticks.
Thank You,
Manolis aka Markoul

Manolis,
With BIOS 2.7 it does not matter which Dimm Slots you use as long as you only use 2 sticks and they are matched. You will get Twinbank.
Several people have been testing their Memory Bandwidth and have found one combination to be a little better than the other 2 combinations. I would run Sandra on your board and see which combination gives you the best results with your RAM.
I would like to see your results too.
Richard

Issue on payroll area which is changing from biweekly to monthly in Mid of

Dear Experts,
I have an issue on payroll area which is changing from biweekly to monthly in Mid of the Month.
One employee was retired on 29th of March, so his payroll area was changed from biweekly to monthly on 29th. For retire we are running the payroll on 8th of every month. When we are running payroll for April he has received only 29th and 30th retire salary, by the time he is not yet retired also.
In this case the main problem is monthly payroll time is early then biweekly. so the employee is getting retire salary then his regular pay.
Can you guide me where we can control that monthly payroll area should not be triggered at this movement.
Thanks
Chandra

You can do that but it is not that easy as it sounds if you have to do that over a period of say 10-20 years...lot of operational work!!
Also say if you load the retiree action one month ahead say on 03/01/2011. And the employee is retiring on 03/29.
Retire payroll is on 04/08
Biweekly is on 04/15
Now you decide to lock the employees after the 1st biweekly check of March...say which was process 14 days before 04/15 would be 04/01. The employee number is locked between 04/01 to 04/15. For 14 days you have locked these employees!!
What happens if there is adjustment pay...you have to manually go and unlock the employee and lock him after the adjustment check.
I will let you decide based on the comfort, SAP effort, Operational effort and system maintenance.

Feature Request: Javascript libraries of which the versions are in better control

This essentially aimed at the developpers:
Anyone who browsed with noscript, or used ghostery, knows the web is full of javascript. These are often downloaded from separate websites.(for no apparent reason, they can easily be hosted locally) This is a bad thing:
* Accessing these gives the the http-referrer(presumably) so it indicates someone where you are browsing.(though other resources do this too)
* Javascript is nowhere as secure as html in terms of potential weaknesses.
* Javascript is -plainly- designed to have access to the web page, or the current url.
* These are often accessed via http, it could be spoofed to return a different
* The servers it came from can outright change it at any point, and the user has little control, even if the javascript source code unobfuscated, there is no time to do so as it is in the hands of the users immediately.
For this reason i suggest implementing a library(package system) for these javascripts, of which the packages are signed, and the user controls when they are updated. It should be easy to use and add these libraries for developpers, preferably, additional people can attest they read the source code and approve of it.
Well, to be honest, i cannot really suggest entirely how to do it, i just dont know enough. And it has to be entirely transparent to users, at least. Some kind system that detects that people have checked the source code, and/or a default time duration.(depending on the package)
Of course this has to be coordinated with other browsers/standards creation. This sounds hard and it seems like you're already doing a really good job at it.(And at developping FF in general)

Hi Jasper, to give a specific example, if Firefox were to find a site using a particular version of jQuery then it would instead use a pre-validated copy of that library from a trusted site or from the Firefox program folder?
I think this would be a complex project, but perhaps an extension developer would consider building it, at least to demonstrate how it could be done?
This forum is like an emergency room so your suggest may get lost here. You can submit a version to the Input site (Help > Submit Feedback connects you) or on a Mozilla mailing list. Not sure which one would be right for this idea, but you could take a look here: [https://lists.mozilla.org/].

What is process through which schedule lines are cofirmed in Sales Order

What is the process through which schedule lines are cofirmed in Sales Order

Hi,
Schedule lines get confirmed on the basis of backward or forward scheduling carried out by system based on Material Availability date.
Regards
SD
Message was edited by:
Samier Danish

I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

In landscape mode, the mailbox list is automatically displayed (in portrait mode, you will need to tap the button to,show it).
To edit the list, tap edit as shown below.

How to find out Which SAP programs are affecting Which Z programs?

Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu

Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu

What are the settings in mail to see photos that were sent- then email recepient replies back w/ comments but there are no photos to know which one they are commenting about. how do i see what was sent when they reply? thanks for your help

anyone know how to get mail to show the photos back to you?
ex: send pictures to friends, they reply w/ comments, but have no idea which pictures they are commenting on because they do not sho up in a reply.
thanks for your help

Did you ever get a reply to this. I have the same problem. I have the same problem when even when I reply to an email... no photo shows up in my new reply message. The only way I have figured out is to use the "forward" option.
But this still does not solve the problem when people email me back... I have no idea what photo they are speaking of. Instead of a photo... there is a <photo name of some sort>.
Let me know if you ever hear on this one.
Many thanks.

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

Hi Ali,
I'll just add this reference to the good tips from my friend Manish (+5)
Support for the 7800 series in CUCM 8.6.2 was first added with this
Device Pack;
Cisco Unified Communications Manager
Device Package 8.6(2)(24104-1)Release Notes
Cisco Unified Communications Manager Device Package Release 8.6(2)
adds support for the Cisco IP Phones
7821, 7841, and 7861 running SIP firmware release 10.1(1).
The steps are in this doc
http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
You might as well install the latest 8.6.2 Device pack
cmterm-devicepack8.6.2.24112-1.cop.sgn
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic

My library of 800 songs has been replaced by 48 older items which I believe are off an older device (old nano belonging to another family member). How do I get my songs back?

My library of 800 songs has been replaced by 48 older items which I believe are off an older device (old nano belonging to another family member). How do I get my songs back?

See Empty/corrupt iTunes library after upgrade/crash.
tt2

How to find which data elements are used in ABAP program ?

I wish to find out which data elements are used in some programs .
Is there any DD table which stores this information ?
I know we can go to program and look in fields, but do SAP stores this information somewhere ?

Dear Kaushal,
Please check the table <b>TRDIR</b>.
Regards,
Abir
Don't forget to award points *

I'm new to apple. my app button has a number 2 on it meaning 2 downloads to action i presume but when i get to the store there is no indication which two these are. Any help please ?

Which apps do i download when a number appears on the app button but there is no indication in the store which 2 these are ?

Click on the Updates icon in the App Store's toolbar. If there are upgrades they will be listed there.

Which extraction methods are used for extracting AR , AP, GL , cost centre

which extraction methods are used for extracting AR , AP, GL, cost centre account   data from R/3 system.
please let me know what type of extraction we use...generic or FISL.... OR COPA
ON WHAT SCENARIOS WE USE THIS EXTRACTIONS..
if any have documents on it please email...please send an email    documents ..
to [email protected]
iam bit confused with sap help...
will reward full points
please reply

Hi,
For general ledger :
http://help.sap.com/saphelp_nw70/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
This is the best how-to guide on AP,AR,GL and TAX.
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
Hope it helps.
Regards,
Srikanth.

How can I find out which vi's are dynamic?

I am working on a project made up of hundreds of VIs. I have to make an standalone executable version of it. I was not the original developer. Is there a way I can scan the vi's to find out which of them are dynamic? What should I be looking for as a telltale sign of being dynamic (What makes a vi dynamic?)
Are all vit's dynamic? (I was told by my senior developer to include all vit's in the dynamic section of the build dialog box.)
Message Edited by rashid19672008 on 02-27-2008 03:25 PM

This is not a property of a VI, but rather a way of using it. You can call any VI either way (or both ways), so whether a VI is called dynamically depends on your code.
One way of finding whether a VI does not have static calls is to open all the VIs in the hierarchy at the same time and then go over each of them in a loop, open a reference to it and check its "Callers" property. If the array is empty, it means that this VI is not called by any other VI currently in memory and might be called dynamically. It might also mean that it is an old VI and is not used any more.
Another option is to create a copy of the hierarchy using File>>Save With Options. LabVIEW will only copy the VIs which are called statically and you can then compare the hierarchies for files which are only found in the original.
Try to take over the world!

Which expansion slots are which.

Similar Messages

Maybe you are looking for