Which Express34 Cards work with the latest Yosemite?

I'm running OS X 10.10.1 on a MBP 17" which I just bought 2nd hand - it all seems fine EXCEPT the Thunderbolt port doesn't seem to work - "No Hardware Found".
It is a Mid 2010 machine.
I suppose I will have to go to the apple store to fix the Thunderbolt issue (unless anyone has ideas?) but in the meantime I would like to buy an Express34 Card with a USB3 port for me to use as a stopgap. Easier said than done it seems. I've read lots of comments that generic cards don't work etc.
Can somebody tell me which product will work under this setup? Does it have to be a 'mac branded' one? If so, which?
Thanks very much!
Phil

First be advised that a 2010 MBP has only a minidisplay port.  It is not a Thunderbolt connection.
I have an OWC and a Sonnet Express34 cards in my 17" MBPs.  Both work with no problems.  I use it for eSata connections to my external HDDs.  Do not expect to get USB3 transmit speeds via the card.
Ciao.

Similar Messages

  • Which USB external MODEM will work with the latest MAC MINI?

    Can anyone recommend an external USB modem (other than Apple's) that will work with the latest MAC MINI?
    Thanks!
    Captain

    Hello!
    I am very happy with the APPLE USB MODEM "MA034"
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=ap ple%20usb%20modem#overview
    You cannot find smaller and it never crashed or anything whatsoever.
    Oh yes, and it is white!

  • Presonus interfaces - do they work with the latest Macs?

    A few months ago there was much discussion as to the causes of some F/W 400 interfaces not working with the latest F/W 800 only Maca. Something to do with a particular chipset, I believe. There's a firmware update on Presonus' website: can anyone tell me if this resolves the issue, and if so, should it be OK to run a firewire hard drive off the same port?
    Many Thanks,
    Richard Vernon.

    I have the Inspire, and there doesn't seem to be a firmware update. The issue with the Firewire chipset exists, it doesn't send enough power to the Inspire so it won't sync with the computer. I can only get around it by daisy-chaining the Inspire through an externally powered FW harddisk (which I unmount as soon as the Inspire is synced).

  • Does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion?

    Hi, does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion? The drivers available on the manufacturer's download site are for a newer model and were not designed specifically to work with Lion. Does anyone have a tried and tested fix for this? Thank you.
    Message was edited by: john.rm

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • Will an onboard garaphic card work with the lates version of photoshop or do I have to have a dedicated graphic card

    Will an onboard graphic card work with the lates version of photoshop or do I have to have a dedicated garphic card

    Most likely you should be fine.  Some of the early i7s might not support it (did the first i7 core have integrated GPU?), but any of the last couple are fine.  The nice thing is, that you can always add an aftermarket GPU if you need to, so give it a shot.
    I have a Haswell i7 (4770k) in my desktop PC, and it's more than enough.  I did a lot of research when I built my PC and my conclusion at the time was that a GPU doesn't offer a sizable performance boost unless you buy a really nice GPU ($400+).  The integrated GPU can run all the functions of CS6.
    My laptop is an older i5.  Not sure which, but I think Sandy Bridge.  I can notice the difference in process times between the integrated GPU and discrete (AMD).  But only on certain heavy filters and when working with big composites (~2 gb files).  But that's an i5 and and older one.  That said, the integrated GPU is far more stable, so I usually just put up the lag instead of having the AMD GPU crash my computer.

  • HT1665 I have the iPhone 4S and would like to purchase docking device6. I have the Otter Box Camo case and would like to know which dock will work with the case ON. Thank you.

    I have the iPhone 4S and would like to purchase a docking device.  I have the Otter Box Camo case and would like to know which dock will work with the
    case ON.   Thank you.

    it might be better to contact otterbox to find out from them what they made it compatible with. 

  • HT4587 I downloaded Airport Express Utility 5.6 to get my Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility.

    I downloaded and installed Airport Express Utility 5.6 to get my old Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility. What's up?

    It is likely that you downloaded AirPort Utility 5.6.1.  If you checked the requirements, this only runs on Leopard or Snow Leopard Macs.
    You have Lion, so you need AirPort Utility 5.6 for Mac OS X Lion

  • I have an Iphone 4 which I just updated with the latest software, which put in it in Recovery Mode. It has the picture of the plug with Itunes, I downloaded it now its saying its in Recovery Mode, how do I save all of my previous data without Restoring?

    I have an IPhone 4 which I just updated with the latest software, which put in it in Recovery Mode. It has the picture of the plug with ITunes, I downloaded it now its saying its in Recovery Mode, how do I save all of my previous data without Restoring?
    I updated the phone before backing it up on iTunes, now the update wanted me to connect the phone with iTunes and it says the phones in recovery mode and it must be restored before its used with iTunes. I go to click restore and it says it will reset it to factory default and I'll lose all my current data. I have all my sons pictures and videos along with this notes. I can't lose all of this data! Please help!

    You have to restore the iPod, no ifs, ands, or buts...
    After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
    If you have a good backup you can restore that and you're good to go.
    If you don't have a good backup, then you end up with a "clean" iPod....

  • Will a external Apple iSight work with the latest Mac Mini?

    with a firewire 400-800 if it will what software do i need to take pictures and videos.
    Many Thanks

    Will a external apple isight work with the latest mac mini.
    Yes (if the external iSight works.)
    External iSights are great webcams, but they are getting old (as consumer electronics go) and some have had pretty rough treatment. You can test yours using the suggestions from this page:
      http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
    I suggest you disconnect other Firewire devices until you get your external iSight working with your mini.
    If you do not already have an external iSight and are considering buying one now,
    a new webcam (with warranty) may be a better choice.
    Many available alternatives are listed here: http://www.mac-compatible-web-cam.com/
    THEMACMINIMAN wrote:
    with a firewire 400-800 ...
    Use one of the following ways to connect your FW400 external iSight to a FW800 Mac port:
    • To use the FW400 6pin-6pin cable that comes with iSight, you can use a 6pin-9pin adapter
      like one of these:
      http://tinyurl.com/ydsbb6m  (I use this one.)
      http://tinyurl.com/cgll7o
      http://www.sonnettech.com/product/fw_adapter.html
    • This Firewire 400-800 cable can work:
      http://store.apple.com/us/product/TP320LL/A (I use this one.)
    • Some report that this low-priced alternative cable works:
      http://www.newegg.com/Product/Product.aspx?Item=N82E16812189097
    I suggest you disconnect other Firewire devices until you get external iSight working with your mini. Once iSight works when it is the only FW connected device, you can try connecting other Firewire devices to determine whehter you can use any of them without conflict.
    ... if it will what software do i need to take pictures and videos.
    With your 10.6.3 mini, you can use QuickTime X, iChat, Photo Booth, iMovie, and some of the other apps that are installed with OS X. Your Mac's Help for each of these apps can tell you how to use them with iSight (or other connected cameras.)
    Some more apps you can use are shown in this list:
      http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html
    The web links for each app gives details on what functions is offers with your webcam.
    Many Thanks
    You're welcome.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.3)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.3)
    LED Cinema Display  G4 PowerBook  1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • Which range extender works with the Linksys CIT400 phone?

    Which range extender works with the Linksys CIT400 VoIP phone? Can I use any range extender from any other comany or does it have to be one from Linksys? I am not sure if the CIT400 uses standard frequences.
    On a side note, where's the forum for the phones? I see one in the archives section which seems to be ready only.

    You can use the Linksys WRE54G range expander. For that matter, any 2.4Ghz range expander will work. But what’s more important is what router you would be using the range expander with!! Which router are you using?

  • Has anyone had problems with the latest driver update for the Lexmark printers? My Lexmark printers won't work with the latest driver update.

    Has anyone had problems with the latest Lexmark printer driver update? My Lexmark printers won't work with the latest driver update. If I reinstall an older version of the drivers, they work.

    Mine crashed once with new update, but working fine.
    I had to delete old printer, restart iMac, and then reinstall
    new drivers to get it to work. Would not complete without
    the restart after deleting non-working printer. No problems
    since and all features working.

  • I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imp

    I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imported the colour swatch as just 4 colours as a mulib file.  I drag the four colours on to the muse page in design view but that is as far as I get.  Can anyone help?  Thanks

    I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
    everyone allow read, write
    Details in the manpage for chmod. The actual steps are left as an exercise.

  • I have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    i have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • GoPod - Does it work with the latest Ipod firmware?

    I have a 5th Gen 60gb iPod and have used goPod in the past to remove the volume cap. But ever since updating my iPod with the latest firmware the volume limit seems to be very quiet compared to what it used to be. Is this because goPod 1.4 doesn't work with the latest firmwire?
    Has anyone else had this problem or is it just me going deaf?
    Cheers

    I disagree with that rudolfraith.
    When I plug my iPod in, launch goPod and then press uncap, it does say that it is now uncapped, but the volume limit is no difference at all. I even tested this by hooking my Ipod up to my PC and recording it capped and uncapped, the levels were exactly the same.
    So I feel that goPod v1.4 doesn't work with the latest firmware.

  • [svn:osmf:] 13228: Updating ExamplePlayer to work with the latest API changes.

    Revision: 13228
    Revision: 13228
    Author:   [email protected]
    Date:     2009-12-30 04:33:34 -0800 (Wed, 30 Dec 2009)
    Log Message:
    Updating ExamplePlayer to work with the latest API changes.
    Modified Paths:
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/chromeless/ChromelessPl ayerElement.as
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/text/TextElement.as
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/traceproxy/TraceListene rProxyElement.as
    Added Paths:
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/text/TextDisplayObjectT rait.as
    Removed Paths:
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/text/TextViewTrait.as

    Revision: 13228
    Revision: 13228
    Author:   [email protected]
    Date:     2009-12-30 04:33:34 -0800 (Wed, 30 Dec 2009)
    Log Message:
    Updating ExamplePlayer to work with the latest API changes.
    Modified Paths:
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/chromeless/ChromelessPl ayerElement.as
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/text/TextElement.as
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/traceproxy/TraceListene rProxyElement.as
    Added Paths:
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/text/TextDisplayObjectT rait.as
    Removed Paths:
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/text/TextViewTrait.as

Maybe you are looking for

  • I have Firefox but popup are always poping up can you help?

    While I'm on line popup keep popping up. Sometimes with a word that is underlined or just popping up.

  • Pop-up with 1-800-798-8393 # keeps coming back

    Safari runs on 10.6.8 and I already tried to hold down shift and disconnect from the internet. Still, even after uninstalling Safari  and installing it again. Any ideas how I can get rid of that pop-up

  • Can you add RAM to 2GB MacBook Air after purchase?

    I'm thinking of getting a Macbook Air. Money is tight and 2GB RAM is cheaper than 4GB. If you purchase a 2GB MacBook Air, can you later add more RAM?

  • I'm unable to access the Itunes Store from my Windows 8?

    I recently recieved a new laptop, operating on Windows 8.  {Note: This is my first Windows computer, I transferred over from Mac}.  I decided to open up a new Apple ID to get away from my parent's account, so that was all set up pretty easily.  Now,

  • Network location of NWDI

    Hello, We currently have a single network, a NWDI that is accessible from NWDS client for source control; and this NWDI manages our DEV, QAS and PRD J2EE servers for release and transport. Due to security concerns, we need to separate our network int