Which Features are Only Available on the Driver

Browsing through the forums, I've found out that the nice Audio Console is only found on the driver CD and not available to download. Are there any other features that can't be downloaded? I personally don't like this implementation because I like installing all my drivers in one go if possible, especially after a reformat, instead of installing old drivers off the CD and then having to update. Thanks everyone

Then don't install the drivers on the cd. Download the latest, install them, don't reboot, run the cd and select Custom install and only install the parts you want, and uncheck the drivers. Or does that make too much sense?

Similar Messages

  • I want to buy ebooks from iBooks store, not on Amazon. But I can't because it says that the ebooks are only available on the US. Help  

    By the way, I live in the Philippines. Please help!

    You just have to use whatever store has the book you want, that is how it works at present.  Try Kindle, Nook, Kobo, Googlebooks, Sony if something is not available to you in the iBookstore.

  • Downloaded movies now only available via the Cloud

    I've purchased (not rented) and downloaded several movies and TV shows to my daughter's iPad (over the past several months).  All of a sudden, as of yesterday, only three of them are still available directly from the device (i.e. operating without WiFi in Airplane Mode), the rest are only available via the Cloud.  This has occured on both iPads that this iTunes account is registered.  My 4-year old daughter says she clicked an "X" when she went to watch a movie, but as I wasn't there when it happened, I don't know what she clicked exactly and where.  Any help figuring this out would be greatly appreciated.

    What iOS version is on the iPad (Settings > General > About > Version) ? On iOS 5 and possibly 6 (I can't remember when it changed), you could delete films and/or TV programmes from the Videos app by pressing and holding it on the selection screen in the app, and after a second or two it would get an 'x' on its top left corner - tapping that would delete it from the device.

  • Apps only available in the USA

    I am new to Apple and loving it but there's one thing that makes me quite upset to be frank
    Why are certain free apps only available in the USA? Infant even some premium apps are only available in the USA...
    Had a chat with an old friend of mine over the weekend and I was bragging about all my idevices and in the end he said something I couldn't refute and it left me quite grumpy he said "apple products are only made to satisfy American users" and I couldn't say anything beyond that.
    Somebody please wipe the moisture from my ears.....
    One more idea, how about all premium apps come with a trial version, even if its a day or a few hours for that matter. one is often forced to purchase an app before they know that all the marketing material was flawed or the app doesn't fulfill what the user is looking for, but the money is gone .....
    Tx

    Hi Guidolima,
    Please refer the link: http://www.adobe.com/products/creativecloud/buying-guide.html.
    Regards,
    Romit Sinha

  • Edits will not be saved. Any Edits made to the enterprise global template items are only available during this session.

    Hi,
    I am getting a pop-up message(Edits will not be saved. Any Edits made to the enterprise global template items are only available during this session.Make edits in checked-out enterprise global template to make them
    available for all users of this project server) when trying to insert a new column in the Gannt Chart View.
    Due to this what all are the columns that inserted in the project plan, will be lost when open the project in the next time.
    I have opened the Enterprise Global Template and cross checked for Gaant Chart view it is showing the table as "Entry" only.
    The requirement is what all columns are required for the project plan, manager will insert in the project first time. Next time on-wards it needs to be display the columns when opened the project from server by default.
    We are unable to reproduce this issue in our Dev Envt.
    Could anyone of you please help me.
    Thanks in Advance!
    Regards,
    Venkat

    Hi Venkat,
    I suggest to remove Gantt Chart view and Entry table from Eglobal. These are default views from client and it is highly recommended to not use them in Enterprise Global.
    Whatever a user ist doing on a view or table which is included in Enterprise Global will be reset on next open - therefore you receive this message.
    If you need some server wide defined views and tables, create them. But remove Gantt Chart and Entry.
    Does that help?
    Regards
    Barbara
    To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
    an appropriate solution faster. Thanks for your support!

  • Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

    Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

    igonneau wrote:
    Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer?
    You can, but how are you going to back up those other files?  When (not if) your Time Capsule fails, you risk losing them.  See #Q3 in Using Time Machine with a Time Capsule for details.
    Then can i access these files only on the time capsule without connecting it?
    Not sure what you mean.  You have to connect a computer, either via Ethernet cable or wirelessly, to read or write to the disk. 

  • How to push apps which are not available in the App Store?

    Hi :-)
    I've got one question: I would like to push apps via profile manager to different devices, which are not available in the App Store, so I can not buy them via VPP.
    Example: TeamViewer for OS X.

    You can't. Use something like Apple Remote Desktop.

  • Trying to update apps on iPhone keeps saying funds not available which there are. What's the minimum balance for free updates?

    Trying to update apps on iPhone keeps saying funds not available which there are. What's the minimum balance for free updates?

    Updates are free. Upgrades aren't.

  • Syntax error: annotations are only available if source level is 5.0

    In eclipse, I am trying a hello world JMS tutorial.
    In the code below, it doesn't like the @ sign for some reason... And I don't know how to make it happy....
    It give this error:
    Syntax error: annotations are only available if source level is 5.0
    --------------code------------
    public class MessageSender {
       @Resource(mappedName = "jms/GlassFishBookConnectionFactory")
       private static ConnectionFactory connectionFactory;
    Here is my path if that helps.
    Path=C:\oracle\product\10.2.0\client_1\bin;C:\Program Files (x86)\Java\jre8\bin;c:\glassfish4\glassfish\bin;C:\Program Files (x86)\Java\jdk1.8.0\bin
    Thanks for any leads!
    Jim

    It give this error:
    Syntax error: annotations are only available if source level is 5.0
    That exception is telling you that the java compiler version being used to compile your java source is not 5.0 or later.
    Eclipse uses 'some' version of Java to run itself. And, by default, your java code will use that same version of java unless you configure it to use a different version.
    http://wiki.eclipse.org/Eclipse.ini#Specifying_the_JVM
    One of the most recommended options to use is to specify a specific JVM for Eclipse to run on. Doing this ensures that you are absolutely certain which JVM Eclipse will run in and insulates you from system changes that can alter the "default" JVM for your system. Many a user has been tripped up because they thought they knew what JVM would be used by default, but they thought wrong. eclipse.ini lets you be CERTAIN.
    Check the version of java that eclipse is using. Just because that version of java is not on your path doesn't mean eclipse isn't using it.
    Then repost your question in an eclipse forum.

  • I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

    I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

    As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
    Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

  • I created my iTunes account when I was living in Venezuela, but have relocated to the US now.  How do I change my apple store to allow me to download apps that are not available in the store available to Venezuela?

    I created my iTunes account when I was living in Venezuela, but have relocated to the US now.  How do I change my apple store to allow me to download apps that are not available in the store available to Venezuela?
    Sorry for the long 'subject'!  hahaha  I am new to the community.  This should be fun!

    No, What I mean  is, Now I am leaving in USA but every time that I tried to download an app only appear app available in Venezuela no the one available in USA. 
    I already change my address and select USA but still I can not download app for USA

  • How can I re-install Imovie ? some features are not available ( world globes ,etc...)

    How can I re-install Imovie 10? some features are not available ( world globes ,etc...) after the update from today

    I'd suggest a fresh reinstall of iMovie then. Delete the Application and re-download from the Mac App Store. You should see something like this:

  • ¿iTunes match is only available with the music on iTunes Store of my country?

    I want to use iTunes Match but my question is.. if I have imported CD's (i'm from México), that they aren't available in the iTunes Store of my country, iTunes find the matches with other iTunes Stores (of the other countries) or it only work with the songs available on my iTunes Store (México)

    Hi
    I have achieved matches for tracks/albums that are not available in the UK store. If the track is on Apples server, there is a chance that you will get a match even though not available in local iTunes store.
    Jim

  • Dimension which belongs to only one of the several fact tables

    Hi,
    I'm newbie in BI. I have good knowledge of DW and Administration (OCP).
    Firstly could you give me, please some link expalining aspects of creating "Business Model And Mapping" better than SE Tutoarial.
    Now how my problems looks like :
    I have several fact tables and dimensions.
    But not all dimensions are shared among all facts.
    So when i try to put in Answers measurements from all facts it's ok - results are retrieved.
    But when i try to add to report some Dimensions attributes which belongs to only one of the facts all facts measurements are gone except measurements for fact table to which dimension attribute is linked to.
    I think i know what is the reason but i don't know how to simply solve it :
    Below is session trace excerpt only with facts measurements :
    RqList
    Liczba Transakcji:[DAggr(Fakty - Transakcje (ZSFK).Liczba Transakcji by [ Słownik - Daty.Nr Miesiąca, Słownik - Daty.Miesiąc Rozliczenia, Słownik - Outlety.Outlet Numer (MID), Słownik - Outlety.Outlet Nazwa, Słownik - Terminale.Nr Terminala, Słownik - Daty.Rok Rozliczenia] )] as c7 GB,
    Kwota Opłaty Netto:[DAggr(Fakty - Opłaty za Terminale (CBD).Kwota Opłaty Netto by [ Słownik - Daty.Nr Miesiąca, Słownik - Daty.Miesiąc Rozliczenia, Słownik - Outlety.Outlet Numer (MID), Słownik - Outlety.Outlet Nazwa, Słownik - Terminale.Nr Terminala, Słownik - Daty.Rok Rozliczenia] )] as c11 GB,
    Below iis session trace excerpt with facts measurements and added dimension attribute:
    RqList
    Liczba Transakcji:[DAggr(Fakty - Transakcje (ZSFK).Liczba Transakcji by [ Słownik - Rodzaje Walut.KOD_WALUTY, Słownik - Daty.Nr Miesiąca, Słownik - Daty.Miesiąc Rozliczenia, Słownik - Outlety.Outlet Numer (MID), Słownik - Outlety.Outlet Nazwa, Słownik - Terminale.Nr Terminala, Słownik - Daty.Rok Rozliczenia] )] as c7 GB,
    Kwota Opłaty Netto:[DAggr(Fakty - Opłaty za Terminale (CBD).Kwota Opłaty Netto by [ Słownik - Rodzaje Walut.KOD_WALUTY, Słownik - Daty.Nr Miesiąca, Słownik - Daty.Miesiąc Rozliczenia, Słownik - Outlety.Outlet Numer (MID), Słownik - Outlety.Outlet Nazwa, Słownik - Terminale.Nr Terminala, Słownik - Daty.Rok Rozliczenia] )] as c12 GB,
    Second plan is the plan when report retrieves only results for one fact table and null's for others
    Problem is with attribute : "Słownik - Rodzaje Walut.KOD_WALUTY" which is from dimension which belongs only to one fact table.
    So other fact table are not linked to this dimension and therefore this plan cannot retrieve results for them.
    It is obvious that some of the facts cannot share some dimensions with others but i would like to join them on other common attribute
    and my question is how ?
    Thanks's in advance Arkadiusz Masny
    Edited by: Arkadiusz Masny on Dec 10, 2009 6:49 AM

    It's normal behavior. How would fact measure know the value for accurate "non-fact" dimension
    Workaround:
    First solution is:
    Add into logical source of each fact (in logical layer) tables to which belongs dimension attribute and join dimenstion to that fact.
    Second you may:
    Create fact table which join all needed dimensions with some useless fact ( i.e. count). Next you have to set option "Implicit Fact Column" in presentation catalog to use this fact table.
    I can explain it to you in Polish by mail or phone
    You bring me a next topic for my blog (in Polish) http://obiee.pl so I'll write sth about such behavior :)
    Regards

  • Business Rule error: Accounts are not available in the rule table

    Hi everybody,
    I have a problem running the Business Rule for the profit/loss copy to the equity account.
    The Business Rule I set reads from all P&L accounts, P&L specific flow, acual category, all datasources and then it writes everything keeping the source settings apart from the account destination (the equity profit/loss account) and the flow destination (I write in two different flows, so the rule is made up of two equal lines differing only in the flow destination). "PROFIT" is the ID I chose.
    Then I created the related script logic (ID=CALCACCOUNT):
    *RUN_PROGRAM CALC_ACCOUNT
    CATEGORY_M = %CATEGORY_M_SET%
    CURRENCYLABEL = %CURRENCYLABEL_SET%
    TID_RA = %TIME_SET%
    CALC=PROFIT
    *ENDRUN_PROGRAM
    Finally, the prompt ( process chain: CPMB/RUNCALCACCOUNT):
    PROMPT(SELECTINPUT,,,,"CATEGORY_M,CURRENCYLABEL,TIME")
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SUSER,%USER%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPPSET,%APPSET%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPP,%APP%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SELECTION,%SELECTION%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,LOGICFILENAME,CALCACCOUNT.LGF)
    But anytime I run the package it fails giving me the message error: "Accounts are not available in the rule table".
    I tried every possible change but nothing; if someone could help me somehow I'd be really grateful!!
    Thanks
    Filippo

    Hi James,
    Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
    Any other suggestions?
    Regards,
    Vincent

Maybe you are looking for