Which file names verify Acrobat Standard 9.3.1 updates are installed?

Without having to launch the application and look at Help and About, what is a good way to check that 9.3.1 updates are installed?
What files would be on a PC with 9.3.1 that would not be on it if it only had 9.3.0?

How come the file version is not changing?
I built an AIP from 9.0.0 to 9.1.0 to 9.1.2 to 9.2.0 to 9.3.0 to 9.3.2 using all quarterly updates only.
The install function does not work when upgrading existing installs of 9.0.0 to 9.3.2 as can be seen on this forum by other users.
You are told to remove the existing installation manually.
I used the work around of REINSTALLMODE=vamus within my msiexec script. However the Acrobat.exe file details still show the version as 9.0.0 and when you open Acrobat and go to Help, About you see the current version as 9.3.2

Similar Messages

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

When combining pdfs, the 1st page of the first file is lost (acrobat standard 9.4)

Hi,
When i combine two files in acrobat 9.4, the process loses the 1st page of the first file. I have to manually copy in the missing page from the original.
Does anyone have any workarounds/fixes?
The process used to work ok with adobe acrobat standard v7.0.8.
The two files are PDF 1.4 and PDF1.5 standards.
Thanks
Raj

I am not very clear at which step you are facing issue. Below is the sequence in order to scan more pages from Acrobat:
1. Launch Acrobat. Click menu File->Create PDF->From Scanner....
2. "Acrobat Scan" dialog will appear. Select your scanner installed in Scanner dropdown. Check 'Prompt for scanning more pages' checkbox as you want to scan more than one page. Click Scan button in "Acrobat Scan" dialog.
3. Now scanner UI will appear. Make setting like color mode/resolution and click Scan button(or may be Accept button) in this dialog. (This is scanner specific ui)
4. After this scanning will happen and "Acrobat Scan" dialog will appear with "Scan is Complete" and "Scan more pages" option.
5. Select "Scan more pages" option and click OK in this dialog to scan more pages.
6. Now again scanner UI will appear as in step 3 above. Make your settings and proceed.
Do you see scanner UI or "Acrobat Scan" dialog in step6? Are you not able to click Scan(or Accept) button in scanner UI?

How to programmatically disable prompts for output file names in Acrobat X

My code to programmatically disable output file names (below) is not working on a Windows 7 64-bit machine using Acrobat Distiller X. It works perfectly on a Windows XP machine with Acrobat Distiller 8.
The latest API Reference I was able to find is dated June 2008. My logic follows this convention.
I have confirmed that the registry key is updated as specified below. I have also confirmed that I am able to write to the directory indicated.
Please provide any suggestions to resolve.
Thank You!
~Lori
'Create the Registry Key where Acrobat looks for a file name
        CreateNewRegistryKey HKEY_CURRENT_USER, _
                     "Software\Adobe\Acrobat Distiller\PrinterJobControl"
'Put the output filename (FilePath) where Acrobat could find it
        SetRegistryValue HKEY_CURRENT_USER, _
                 "Software\Adobe\Acrobat Distiller\PrinterJobControl", _
                 C:\Program Files (x86)\Microsoft Office\Office12\MSACCESS.EXE, _
                 T:\PDF Files\Current Week\NFS_Lori,Test.pdf

I remember seeing that the problem is thunking. A little more specifically, because it's a 32-bit driver but a 64-bit executable, there's a 32-bit system spooler process which will always show up as the EXE name.

Is there a way to automatically set the file name in Acrobat Properties when exporting a PDF from Indesign?

When I used Quark to make a PDF, the title area in the PDF was automatically populated with the file name, there in the properties tab. We like use this area to confirm file names of original files, so we can keep track of drafts, (in case the file name of the PDF is changed, which our boss often does). Is there any way to set up InDesign to do the same?

@stadlock – I think I know what you mean…
You exported to PDF and changed the file name in the export dialog to a different one from the document name presented there the first time you exported that document. And in exports after that the new name will be presented in the dialog instead of the name of the document.
What you can do against that?
1. First time you want to export: Save before the document is exported. And do not save after it's exported with a new file name.
2. After the new file name is already there in the export dialog:
Type in the document name in the dialog. Export. Or abort after chosing a export preference. Save. Check again, if the document's file name is in the export dialog. If yes, procede like in suggestion #1. If not do a full export with the document's file name, save and then procede with suggestion #1.
Uwe

How to change "_review" at the end of the file name in Acrobat XI Pro

For our business workflow, we need to be able to change the "_review" at the end of the file name when creating shared-review PDFs. Older versions of Acrobat Pro allowed me to customize the ending of the file name before it was saved as a shared review PDF. For example, when we send the initial review PDF, we append "_Review"; when we send a mark-up PDF (to capture changes before the next revision), we append "_Mark-Up". However, the XI Pro version does not (it automatically appends "_review" and doesn't give an option to change it).
Is there something I need to configure in my settings to allow file name changes for shared-review PDFs?

So why did you said that in your first posting? My glass sphere is out for cleaning...
Instead of type c use strings and add spaces until they have the appropriate length.
loop at outtab assigning <pout>.
while strlen( <pout>-val ) < 135.
concatenate <pout>-val `` into <pout>-val.
endwhile.
endloop.

Acrobat Standard 9.1.2 update problem?

I'm running Acrobat Standard 9 on Windows Vista Ultimate.
Right after installing the Acrobat 9.1.2 update, but before restarting my system, I tried to open a PDF file, and experienced cascading file openings, where Acrobat seemed to be trying to open every PDF file on my hard drive in a separate window. Each window header contains the statement: "Adobe Acrobat not responding." After shutting down Acrobat through Task Manager, I then restarted my system, thinking that the problem was a failure to complete the update installation, but when I just tried to start Acrobat (without trying to open any file), it automatically began opening multiple PDF files again.
At that point, I ran a restore to a previous Acrobat version, but did not restart my system. After the restore was complete, my desktop displayed two Acrobat startup icons, one for v9.1.2 and one for the previous version. I tried to start Acrobat by clicking the previous verion icon, but had the same problem with automatic multiple file openings. When I checked the software list in Control Panel, I found that it only contained v9.1.2, and not the supposedly restored version. Does anyone know if I had to restart my system to make the restore work?
When it looked like the restore to previous version had not worked, I did an Acrobat program repair through Control Panel, and restarted my system, but when I tried to start Acrobat, the same problem occurred. Every time it occurs, I have to shut down Acrobat through Task Manager.
I never experienced this problem until I installed the 9.1.2 update. Has anyone else experienced problems with this update? Does anyone here know the cause of the automatic multiple file opening problem?

As far as I'm concerned, there is something screwy about this whole release. I have used Acrobat Standard since v4.0, and was forced to buy v8 or v9 when I upgraded my OS to Vista, so I chose v9. However, the most important feature to me (besides converting other documents to PDF files), something called FreeText, was replaced by something now called Typewriter. Unfortunately, where FreeText was intuitive and seamless, I cannot view the result of a Typewriter session in my document, after entering new text and closing the feature. On top of that, Adobe tech support seems to have gotten less accessible over the years.
This new problem has now rendered my Acrobat program completely unusable, and for some reason, Adobe's Internet support contact form doesn't even interact with my inputs. This forum has proved useless to me for any problem-solving. Anybody from Adobe Engineering listening?

Unique file name to be decoded and to be updated in a table along with data

Hi
I'm working on a File to Proxy scenario, where the file names(10 chars length) are unique. These files will be available for XI in a source directory. My requirement is -- file name need to be decoded into 3 values and to be updated into a r/3 database table along with the file data.
Hope my requirement is clear.
Thanks.

You cannot see the field which stores the file name. The file name comes from payload at runtime.
Secondly no need to create any input parametes in your UDF, just edit your udf and delete the input parameter (default input is 'a') so that you don't have to map any constant to this UDF just map this UDF to target field.
e.g. UDF ---> target Field.
I did the same but am not able to activate the mapping.
Mapping activation Error:
Activation of the change list canceled Check result for Message Mapping hello_mapping | http://briks.com:
Mapping not sufficiently defined
Chennai.

File names missing from thumbnails when short cut keys are used

Across several Adobe products I use (Photoshop CS3 and CS6, Captivate 5 and 5.5) I don't see filenames under thumbnail images when I use short cut keys to open or save documents. This happens in Windows 7 and Windows XP.
When I use the short cuts the file names don't appear in the document window - all I see is thumbnails with nothing under them.
If I open or save through the menus I don't have this problem.
It doesn't always happen, but occurs maybe 75% of the time. Sometime the file names will appear at first, but if I navigate to another location they disappear. This only happens in the thumbnail view in the window. Other views show the file name but as they don't show the thumbnail aren't as useful when working with images.
Does anyone know what is causing this, and how I get the file names to appear?
Thanks

Here's a couple of screenshots of the problem (Photoshop CS4 and Captivate 5.5 running in Windows XP). I have the same problem with Photoshop CS3, and now CS6, running in Windows 7 on another computer. It's not so bad when you can see images, but when you're trying to find folders, or have PSDs that don't thumbnail, then it becomes a nightmare trying to open or save anything.
Thanks,
Alistar

When syncing iTunes reports "The iPod "name" cannot be synced. A duplicate file name was specified. ". the music is updated but all the sleeve imagary is not including deleting the existing images. How do I solve please?

When syncing iTunes reports "The iPod “name” cannot be synced. A duplicate file name was specified. ". The music is updated but all the sleeve imagery is not including deleting the existing images. How do I solve please?

Hello WGT52,
It sounds like this error message is preventing you from syncing your content to the iPod. I would recommend the troubleshooting steps in the following article:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
Thank you for using Apple Support Communities.
Take care,
Sterling

How can I tell which Apple Security Updates are installed?

While troubleshooting a printer issue, I installed some 'Extra' printer profiles from my OS 10.6 Install DVD. After which, I got a dialog box from the Installer saying that I may have replaced some newer items with older ones, and it suggested I run the latest OS "Combo" installer. Which I did, even tho Software Update said I was up-to-date.
But apparently, when I ran the "Mac OS X 10.6.8 Update Combo v1.1" -- it downgraded some of my Apple software to older versions. For example, I know for sure Safari was at 5.1.2 before I ran the Combo, and it's now at 5.0.5. Yet Software Update is not telling me about v.5.1.2, which it shows as already being installed (at a date prior to me running the Combo updater).
So my question is:
What other software might have been downgraded by the 10.6.8 Combo v1.1 -- and if Software Update thinks I running the current versions, how am I going to find out for sure?
Obviously, I can check version numbers of my installed Apple software like iTunes and Aperture against the latest updates available at Apple Downloads, but I don't know how to check on background files like Security Updates, Java, etc.
I am particularly concerned that I am running the latest Security Updates.
Thanking you in advance,
- gw

steve626 said:
"... There you will be able to see if a more recent version of Safari, etc. was replaced with an older version."
Not exactly. That screen shows my most recent Safari update was 5.1.2 on 12/16/11 -- then it shows the Mac OS X Update Combined was installed on 1/2/12. That's when my Safari got downgraded to 5.0.5, but that detail is missing from the Installed Updates preference pane.
It looks like once an update gets installed, Software Update remembers that -- but does not take the newer update off the list if an older version replaces it???
So, even though I see Security Update 2011-006 was installed on 10/21/11, I'm not sure if the OS Combo Update replaced any security items with older bits. Is there anything specific to security updates that I might be able to check?
-gw

Problem in openig some PDF file names in Acrobat Reader

I didn't test in other versions of the OS or with other versions of Adobe Acrobat Reader, but in Windows 7 Enterprise (with SP1) 64 bit, vith virtual apllications service installed, when a PDF file has in the name the letters CR (caps), tries to open Adobe Acrobat Reader with the VAppLaucher and says
"Before proceeding you must first lauch Adobe Acrobat and accept the End User Licence Agreement",
even with the normal Adobe Acrobat Reader already configured in the local machine.
As soon as I change the name of the PDF file, it works without any problem.

Hi,
This bug was fixed with the latest release of Adobe reader i.e. Version 10.1.1 (Please refer to the Bug Fixes section in http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_ReleaseNote_10.1.1.pdf).
Please update to the latest version, by clicking on Help > Check For Updates or try downloading the patch from: http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.1/misc/AdbeRdrUpd1011.msp
Hope this helps
Ankit

Can using "Reduce File Size" in Acrobat Standard 9 effect DPI

I'm sure the answer is no to this question, but before I wholeheartedly recommend this fantastic tool for use throughout our firm, I need to know if there is the possibility of a PDF's functional DPI being reduced in a scanned PDF by using Reduce File Size. What I mean, I guess, by functional DPI, is the DPI in the PDF after running the tool. Courts require 300 dpi on scanned PDFs, which is our standard, but once in a PDF it's impossible to determine (as far as I can tell) DPI in a file. I notice no reduction in quality when using this tool, but want to make sure that we aren't circumventing court guidelines when using it to help reduce the size of files scanned at 300 dpi.

Hi Anoop,
I can share the graphic file, but not the pdf which contains it (as it contains confidential information) - thanks!

Deleting PDF files using Adobe Acrobat Standard XI

I can't delete PDF files I created myself. I get the error message I don't have access to edit, see snapshot above. I am the administrator of my own laptop. Browsing this forum helps me to locate the same query as mine but no exact answers/steps of how to bloody delete the damn files. *sorry, bit annoyed of the run-around links & not found pages* Any help would be appreciated. Thank you in advance.

I want to just delete closed PDF files. And I know how to delete using Del button or Right Click > Delete. The problem is I get error message saying the file I want to delete, can't be deleted.
I tried a number of combinations with Preview enabled & disabled, but still won't let me delete the files. I haven't tried exiting/closing Acrobat AFTER disabling Preview THEN deleting the PDF files, will try this. But if this is how I'm supposed to delete files in Adobe XI from now on, come on, seriously?! I work with a lot of PDF files. I shouldn't have to close down the application (Acrobat) just to delete the closed PDF files using my File Explorer view. It's like having to exit Word each time I want to delete closed .docx files.
Will try & advise.

Adobe Acrobat Standard Stops Working after Update

I have Windows 7. I purchased Adobe Design Standard including Adobe Acrobat Pro. It worked for a while, then one update, it stopped working. If I click on a PDF, nothing happens. I uninstalled and reinstalled, and then it works, then it will randomly stop working again (I believe after updates) and I keep having to uninstall and reinstall that program to get it to work, which is a real pain. Why is this happening? For such an expensive piece of software, I'm getting quite irritated with this and hope I can find a solution.

Instead of reinstalling, just do a repair. When the PDF does not open you are assuming Acrobat is at fault rather than something being messed up in your OS. First, open Acrobat from the start menu (I have no idea what OS you are using). The from the file menu open a PDF. I assume this works.
Next try to right click on the PDF and select Open With, selecting Acrobat. If it opens then, then the problem is that your file associations are getting messed up -- probably by another program or you OS system updates.

Which file names verify Acrobat Standard 9.3.1 updates are installed?

Similar Messages

Maybe you are looking for