Which file type should I use?

Hi all,
I am finally building my book. Using Elements 10 as my primary. My workflow starts with creating a new file (file/new/blank)
I just finished the first page and to be safe I saved it as a PDF, PNG and JPEG. When all the pages are done I am going to print it locally. I think JPEG will be useful and this first page is only 8MB. I just have to decide what my other file type should be, which will the file I print. Both the PNG and PDF files were 60MB each. Should I contine to save as both? I will most likely come back and re-edit as well. Thanks.

You actually have two questions:
In order to re-edit at a later date, save it as either a PSD (Elements native file format) or TIFF. These file formats preserve your layers and masks, so re-editing is a snap.
When it's time to print, talk to the printshop you're going to use and ask them what file format they prefer. Most places can handle PDFs.
Ken

Similar Messages

Which file type should I use and how I use it?

Hello!
I need to create a file with some data that has been inserted manually.
In this file, for example, there are:
ProjectName1: string1, string7… string10, date1
ProjectName2: string11, string15… string20, date2
ProjectNamek: string 100, string 116 … string 140, date1
I know only one thing: one of the strings.
What I need to find in the file:
I need to find the string at one of these rows and get its ProjectName and date.
For example: if I have string15,
I should find string15 in the file, and get its ProjectName and date:
ProjectName2, date2
Which file type should I use and how I use it? What is the best solution?
Thanks!

800512 wrote:
I need to create a file with some data that has been inserted manually.
In this file, for example, there are:
ProjectName1: string1, string7… string10, date1In addition to Pandiya's advice, if the string is always in exactly the above format
(ie:
1. ProjectName always starts the line and ends with a ':'.
2. The rest of the strings on the line are separated by ", " and will never contain ", "
you might also want to have a look at String.split().
Winston

Which File System should I use?

Which is the best file system to use on a drive, baring in mind the following requirements:
* Read AND write compatibility on both Mac & Windows systems.
* Individual file sizes will often exceed 4GB (ruling out the FAT file systems).
* The drive is connected via USB (160GB).
Any help appreciated

Shaun OFlaherty wrote:
Which is the best file system to use on a drive, baring in mind the following requirements:
* Read AND write compatibility on both Mac & Windows systems.
* Individual file sizes will often exceed 4GB (ruling out the FAT file systems).
* The drive is connected via USB (160GB).
Any help appreciated
Read and write compatibility out of the box is only possible with FAT32.
But your second request rules that one out.
What I would do in this case is to use NTFS as file system (read+write in Windows) and use/buy Paragons NTFS for OSX http://www.paragon-software.com/home/ntfs-mac/ for full access to NTFS from OSX.
In my opinion it is a far more stable solution than using MacDrive in Windows for full access to OSX (HFS+) partitions.
Hope it helps
Stefan

What file type should i use for reading a large file of data?

I want to store data in a file and access them later. The data file could reach 500 to 1000 MBytes, as a binary file.
I may have memory problems.
I do not need the whole data in memory, only a few data each time, for my calculations.
If i use a binary file, i can not read only a few data. I have to load the whole file and then read the data i need.
Is this correct?
If i use another type of file, can i read only a few bytes without loading the whole file?
Maybe a TDMS file?
Solved!
Go to Solution.

I would probably use a TDMS file for this since it could also be read into excel if it were small enough - just more flexiblility. But you can also do it using binary types. You don't have to read the entire file when using binary files. See below.

Which compression type should I use?

Hello~
I'm saving Keynote presentations to QuickTime for viewing on the web. Under the Compression Type menu there are 14 different choices to choose from, Animation to PNG. Apple is big to push the H.264 codec, but I'm getting mixed results with it as it washes out and fades all of my slides. For the life of me I can't find the reference material that explains when its best to use a specific codec; does anyone know where I can find this info? I've googled, searched apple.com and can't find a direct answer to this rather direct question. Even generalized guidelines would work for me at this point....
Anyone?
Thanks in advance,
Rich

Sound settings - formats available
Linear PCM
AAC
AMR narrowband
Apple lossless
IMA 4:1
MPEG 4
Qualcomm
iLBC
How do covert audio to aiff using quicktime?

How to XI u0097 SRM, which adapter type should i use

I want to get info from SRM, and feed back the response
to SRM
Is there any detail about this? and any link?
Thanks

Hi,
Whats the IDoc that you are trying to snd. there is some standard Data available for SRM(SUS) to integrate with SAP xI using PROXY.
Please check on this thread for more details:
SRM XI scenario
R3-XI-SRM Scenario
Regards
Vijaya
Message was edited by: vijaya kumari

Which file format should i use?

I'm trying to decide on a file format that is high quality, but takes up less space than a 256 kbps AAC file. I'm currently considering going with a 224 kbps mp3 file format, but I'm not sure if this would cause a noticeable sound quality difference with the Apple earbuds or my computer speakers. Any reccomendations would be great.

Right, gonna have to stick my two pennies worth in here.
Considering HDD's are getting so big nowadays, encoding audio at a lower bit rate than max is a bit pointless. If you're going to encode, do it at the best possible quality. I've just done about 600 CD's and that's only about 43GB and that was encoded at 320kbps vbr joint stereo in mp3. Some people may scoff and say that vbr isn't very good, but I have to disagree. At those settings, the audio is as good as the original CD and I have a very good ear. Vbr will actually encode the optimum bitrate for the part of the track it is encoding, if there is a quiet part, it will be encoded at low bitrate to save space, but to your ears, you will not notice a thing. In general, vbr will bring the size of an encoded mp3 down, but still keep very good quality.

Which audio format should I use on my memory stick?

Hi. My car has a Clarion HDD Navigation System MAX575 which is compatible with audio CDs and has a memory stick slot. I can't play MP3 CDs. Which file format should i use if I want to load music onto the HDD using a memory stick? I don't want to remove the unit.

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not yet fully developed for the Mac - some features are not yet implemented - but it does work otherwise.
6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
Boot Camp is only available with Leopard. The Boot Camp Beta that was used with Tiger has expired and is no longer available for use. So contrary to the other poster's comment, Boot Camp isn't truly "free." You must purchase Leopard to get it.

Any Idea Which Message type/Idoc Type should be used for FI Invoice

Hi Experts,
Any idea what message type/Idoc type should be used for FI invoice. We are going to send IDOC from R/3 to Non-SAP System using ALE. We are using T-codes FV60/FV65.
Thanks,
Sony

Hi Sony,
I never dealt with FI IDoc.
I think you need to setup EDI outgoing payment in IMG. Please take look this report <b>RFFOALE1</b> - ALE Distribution of Payment Data and <b>RFFOEDI1</b> and check also the program documentation.
Hope this will help.
Regards,
Ferry Lianto

Using an F2100 printer & can't scan to pdf there is no option in the file type menu there used be ?

Using an F2100 printer & can't scan to pdf there is no option in the file type menu there used be ? I'm using xp but had an hp update and have the problem tried unistalling and reinstalling the HP software and even using system restore to be the update .I hope it is just a setting or something simple. Is there another software I can use ? Many thanks

Follow steps 1 and 2 of this tutorial and you will be able to get a jpg file for each of your book's pages inported into iPhoto: 06 - Creating an iDVD Slideshow From an iPhoto Book. If you don't have the Automator workflow Save PDF to iPhoto (which should be in the HD/Library/PDF Services folder) you can download it from Toad's Cellar.
Happy Holidays

HT4839 Which apn setting should I use for my iphone 4 on net10

Which apn setting should I use for iphone 4 on net10

APN Settings for Net 10
Cellular Data
APN: att.mvno
Username: (Blank)
Password:(Blank)
MMS (Blank)
APN: att.mvno
Username: (Blank)
Password: (Blank)
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Max Size: 1048576
MMS UA Prof URL: www.apple.com/mms/uaprof.rdf
Type exactly whats on here on your settings.
Procedure:
1- Turn on your phone
2- Get paperclip take out tray and put your non working sim card in- T-moble and simple mobile sim cards work great for me on this venture.
3. Goto Settings>General>Cellular>Cellular Network
At this point its very critical that you do this fast, Once you change the sim card to your net 10 the option Cellular Network will only stay on for a few seconds while it's searching for service. You will need to click on cellular once the Net10 sim card is in and click on Cellular network again.
4. Get your paperclip take out the tray put in the Net 10 sim card
5. Goto Cellular>Cellular Network while it's searching for service
6. Type in your settings that I list above
7. Scroll back to your main setting (Do not press your Home Button)
8. Once you see your service up and running try out your web and send a picture message it should work.
9. If it does'nt work you mistype one of the settings, it has to be exact or it wont work.
10. Do the process all over again
Keep this information and the sim card away for a later date in case you lose your setting I have'nt turned off my phone or let my battery die to find out if I lose my settings. One thing for sure I lost it when I update to the IOS 6.0.1.

Which jdbc driver should be used for sqlserver 2000 and where to put it.

hi all,
My odi is 11g. I met the error infor "Could not load JDBC driver class [com.microsoft.sqlserver.jdbc.SQLServerDriver]" when i tried to connect to a sqlserver2000 database.
The questions are:
1. which jdbc driver should be used for sqlserver 2000?
2. which folder to put it in?
3. how to set the physical topological "Microsoft Sql Server" to use this jdbc driver?
failed tries:
i downloaded the driver "SQL Server 2000 Driver for JDBC Service Pack 2" and put it in the following folders:
1. .../oracledi/drivers, and set this path to CLASSPATH.
2. .../oracledi/userlib didn't exist, i created it and put the driver in.
3. .../oracledi/agent/dirvers, in which a readme file exists and told me to put drivers in this folder.
All these works were not useful. when I start odi.sh and try to connect to sqlserver2000 database, the same error infor came up.
my environment is:
os: Linux 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
java: Java(TM) SE Runtime Environment (build 1.6.0_13-b03) Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02, mixed mode)
ODI: 11g, installed in /users/oracle/odi/
please help me,thanks a lot.
jun
帖子经 Jun编辑过

Hi,
You should check which JVM version is required by that version of the driver, I think the 2.x versions require a 1.6 JVM
What error are you getting? If it is the "com.sunopsis.sql.c: No suitable driver", it indicates it can't find the jar file (sqljdbc.jar) for the driver you specify.
Drivers folder in ODI 11g is under
C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers.
if you are using the standolone version
On windwos :
C:\Documents and Settings\<userName>\Application Data\odi\oracledi\userlib
on linux
$HOME/.odi/oracledi/userlib
Have a read of :- http://download.oracle.com/docs/cd/E14571_01/core.1111/e16453/install.htm#CHDBIFAJ
Thanks,
Sutirtha

HT1206 I buy apps in my iPhone using different Apple IDs. Which Apple ID should I use to authorize the computer when synchronizing iPhone with iTunes?

I buy apps in my iPhone using different Apple ID. Which Apple ID should I use to authorize the computer when sync iPhone with iTunes?

Hi again,
After a little further research, it appears that you would need to create separate iTunes libraries in order to be able to continue to purchase and download previously purchased items on the same computer, for two different Apple IDs. Sorry - but my husband and I have had the library we sync with authorized for so long, that we have not run into this issue, but it appears that you will get an warning when you try to authorize the second ID on the same computer, indicating that another ID is already associated with it.
So, you will probably have to set up separate iTunes libraries for each ID:
http://www.imore.com/how-use-multiple-apple-ids-one-computer-and-itunes
Sorry for any confusion - hope this helps!
Cheers,
GB

Which uesr exit should I use by such a case

The requirement is to send the email to manager when anyone create or change the Material data by using MM01/MM02.
The function of sending email I have done but I don't know which user exit should be used to call the function.
I have tried MGA00001 >EXIT_SAPLMGMU_001>INCLUDE ZXMG0U02 and writed some code in the ZXMG0U02. (ex: break point) .but when I modified the Material and saved,the stop does not appear. whether I used a wrong user exit?

You can use enhancement MGA00001 (industry only) for this.
For more information, see the documentation for the following components assigned to this enhancement:
Function Calls :
EXIT_SAPLMGMU_001
Enhancement Number : MGA00001
If you want to send a mail for only material creation/ extend then you can you the badi BADI_MATERIAL_REF.
we don't have BADI 's for Change the Material master records.
If you want to send a mail for MM02 also then you can go for the Enhancement ' MGA00001' under the function module 'EXIT_SAPLMGMU_001'.
Thanks
Sekhar

What type should I use ? long Binary ??

Hi everyone:
I want to use MySQL as my Database.But I come across a problem. MySQL have some data types like "long text , long binary , long blob,smallint " I know data type varchar is java String only. What java data type should I use according MySQL? For example : What is long binary in Java ? Is it Blob? Thks

Another thing you can do, is do a query with the fields in question, and then use
Object o = ResultSet.getObject(i)
System.out.println( o.getClass().getName());
to figure out what kind of class you should use.

Which file type should I use?

Similar Messages

Maybe you are looking for