Which firmware version to use with Zen Micro

I currently have version .0.03 on my micro 5G and I have had absolutely no isuues. Is there a more recent version that is stable that is better? I do not want to find new problems that are not there with my micro now, but I also do not want to miss out on any upgrade in function.
Thanks.

here is some info on what's new in firmware .02.05 collected. (read the linked message, and the rest of that thread)
here's info about history of all Zen Micro firmware
.02.05 is not better for your battery than .0.03, but has some other minor features and fixes.
greets, Fred

Similar Messages

  • Which JDK version to use with sunOne 7 ?

    Hi all,
    Does anybody know which version of JDK (1.4.x) is the most appropriate to use in combination with release 7.0 of the appserver ?
    Is the appserver compatible with any 1.4.x release and should we take the most recent one ? (1.4.2_04)
    tx for any info on this.
    Roger.

    It is not mandatory that we should use 1.4.2_04,it wil work with any 1.4.x releases..
    -anand

  • How do I determine which Firmware version to use?

    Should I upgrade? I have the WRT54G version 1.1 The current Firmware installed (reported after I log in with the web browser) is 4.30. How do I decide if I should stay with firmware 4.x or should I move up to 5.x or 6.x. Thanks for the help

    use this link to upgrade the router's firmware ..

  • Firmware problem with Zen Micro (Hel

    Well,I was installing the frimware MTP 2.00.2, suddenly the install freezed after the second boot. At that point my computer could not find the Zen Micro, but the thing is that it was found it in the Device Manager driverless. I tried everything to install the drivers to the Zen Micro, but no success. But I cant understand why I can connect to the removable disk, and not get in touch with it when im turning the removable disk option off. And now i reached the point that I do not know what do do! Help!

    Use the recovery mode on your Zen Micro to remove the existing messed-up firmware.
    Ensure that the Zen Micro is turned off.
    Remove the battery.
    Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the rescue mode appears.
    Select option 3: Reload OS
    After that you will need to reinstall the firmware from your computer.

  • I'm confused with Zen Micro firmw

    Ok, first of all, I know this has probably been asked before, but I looked through the FAQ and searched the forum, and still didn't find what I was looking for.
    What am I looking for? I'm not really sure, to be honest, but I guess I want to know if I should upgrade my firmware. I'd simply like to find some info about all the firmware versions. I have no need for fancy features or "PlaysForSure" (I'm confused about PlaysForSure too, but nevermind). I just want my player to connect to my PC, transfer some songs (I don't mind it being through Zen Micro Media Explorer, it's totally fine by me), and then play my songs for me.
    I also read something about power issues, but it's all very confusing. I remember seeing some post about a patch making it even worse or something, back a few months ago when I was deciding which player to buy. That's why I'm a bit sceptical about this upgrade, and want it done right.
    So.. That's about it. Which firmware should I use if I just want to fix problems that are there now? I'm currently using the default firmware version my player was bought with; .0.03.
    (Oh, and I'm assuming that the fact that my Zen Micro was bought in Sweden does not matter. It's more convenient to buy it in the country I li've in =P)

    question... I'm bit confused about the firmware also. I heard that there was a 2.(or somthing like that) and a . firmware for zen Micros. I'm currently using the . firmware for my Zen Micro. What is the difference between the 2. and . firmware? Or is there even a 2. firmware version? I ask because i keep hearing about a 2. firmware version for Zen Micro, is it true?

  • Random Problems with Zen Micro? Try a diff. USB cable

    I know people have mentioned this in other posts, but I thought I would reiterate it here. Many people seem to be complaining that their player is not recognized, or only sometimes recognized, or recognized by Windows (as a USB device) but not by their Creative software, or songs won't transfer, etc. Well, I had some similar problems which ALL went away when I started using a different USB cable - the one that shipped with the Micro just doesn't seem to work consistently.
    So, if you are having problems with your player that you can't seem to solve any other way, you may want to try a different USB cable. It worked for me.
    Hope this helps - I am (now) loving my new Micro!

    I tried a different USB cable also, I thought that it would help, but I still got the same problems. I can almost guarantee that although you think you may have solved your issues, they WILL come back.
    I've also been experiencing the "Player Not Connected" problem with my Zen Micro.
    I've also had the problem where the Zen Micro just freezes in the "Docked" screen even after it has been disconnected from the PC
    I've noticed that these are common problems with Zen Micros with the new firmware (.0.03)
    My old Zen Micro with the old, original firmware did NOT have this connectivity problem
    Creative should investigate these issues associated with this new firmware, or maybe even making the old firmware available for download to see if this really is the source of all these problems.

  • Strange problem with zen micro (I'm going mad!!

    merry xmas!! I've bought a zen micro in seprember, flashed with .xx firmware; I always used it with windows 2000 with no problem, but... problems began when I've installed a pci card usb 2.0 on my pc; the card worked finely with everything but not with zen micro, that's to say that everytime I tried to import songs by media explorer, the program often wasn't able to import songs; so I've installed windows xp and flashed zen micro with 2.xx firmware (I've installed also service pack 2 and wmp0), but things have gone wrong!!! now everytime I connect zen micro to pc, xp asks the drivers, and it doesn't want neither the driver I've found on creative's cd, nor drivers downloaded from creative's site!! And it's not finished: now zen micro is without firmware and everytime I'm trying to flsh it, a dialogue box says that the player is not connect!!!
    can anybody help me? otherwise I'll have to write to creative support for a substitution...
    please help me!!!!!

    Strange. Unfortunately MTP connection problems are very tricky to solve. It's hard to know whether the firmware upgrade was partially successful, and whether you are on v or v2 firmware. It sounds like v2 firmware, due to the connection problems with MTP.
    The drivers for the v2 firmware are provided by Windows Media Player 0, and are located in the C:\WINDOWS\INF directory. You could try pointing there.
    As the player has no firmware though you have to go into recovery mode, choose "reload firmware", then connect to the PC (see if it's detected) and run the firmware update again.
    If this doesn't work try and find another PC, say a friend's, that meets the requirements of Win XP + SP/2 + WMP0, and see if you can update.
    In terms of resolving the connection problem if it continues, have a look at this thread, particularly the reply by DM, which goes through some of the troubleshooting to solve MTP connection problems. Also look for the link "problems with connecting using MTP firmware" in the FAQ post.

  • Problem with Zen Micro TravelD

    I had a 5GB?Zen Micro which started "skipping" when I used it with the TravelDock. I returned the TravelDock for a replacement. The Zen Micro worked fine for several months, then started "skipping" again. Finally, one day while using it in the TravelDock, it froze on re-building library and I was never able to revi've it. Note that I never had any "skipping" problem while using the Zen Micro with the headphones-only with the TravelDock. I bought a second 5GB ZenMicro a month ago. At first, all was fine when I used it in the TravelDock. The last few days, the "skipping" has started again. As with my first Zen Micro, I have no problem with any track when I use the headphones. The skipping while in the TravelDock is not always on the same track, and again, those tracks play fine when I use the Zen Micro with the headphones. Has anyone else had this problem Any ideas Thanks for any help!

    I've had the same problem since I got the thing, except that it's SPORADIC. Nine times out of ten I can't connect. I've tried other cables, other PC's without bettering the odds.
    Most of the time:
    () Plug in the Micro.
    (2) Hear the USB connection "bong" sound.
    (3) "MTP Media Player" window opens. "What do you want Windows to do?"
    Take your choice
    * Synchonize Media Files to this device using Windows Media Player
    * Take no action
    (4) It doesn't matter. If I select "media player" it can't find the device. If I select "no action" and then click on "My computer" the flashlight searches, but it can't find it either.
    (5) Note the Micro says "Docked" with solid arrows. It looks connected to me.
    (6) Unplug the Micro.
    (7) The Micro still says "Docked" and now I have to remove the batteries to use it.
    I tried e-mail help from creative. They had me try "clean up," they had me try un-installing and re-installing the PC software. None of it made any difference. Finally they suggested reverting back to the old non MTP software. At that point I gave up on them because I had the same problem before I upgraded.
    I tried calling creative. They had my try "clean up" which of course did nothing. Finally they said I should exchange the unit. I'm not convinced that would help, and I don't want to be without it for 0-5 days.
    Scanning this forum today I see two more suggestions. Let the battery run down a bit before syncing. Don't let the USB root hub turn off the power. I'll try, but I don't have much hope.

  • Hidden Hard Drive Files With Zen Micro 5

    Just started loading my Zen Micro with music files this week. I ensured that I only copied files to the player itself, but it seems like my hard dri've's available space is getting smaller and smaller. I used the Zen Micro Media Explorer to rip directly from my CD's to the player. Anyone have any suggestions?
    Also have the latest firmware and software.

    wchoppa wrote:
    Actually, I have loaded about 2.5 GB of music. I've LOST about GB on my local hard dri've. Again, I made sure I only ripped to the Zen micro player, NOT the hard dri've itself. It sure seems that GB (while opting not to download to the machine) is excessi've. OS: Windows XPCreative Zen Micro, FW release .2.5, DR release .27.2HW: Dell Latitude
    If I were you, I would format the player and then retransfer those files again. Of cos make sure that you are really transferring 2.5gb of files.

  • [Edit]Problem with Zen Micro when connected to PC-- cleared but another prob

    Hello,
    My problem is that my Computer (winxp, sp2) does not identify my zen micro any longer. few days ago it worked perfectly but now it doesnt work.
    my zen micro has the firmware with the MTP/plays for sure
    I had installed the things from the cd, when I bought it, that was in the package and then new drivers and the new applications, so two programs. (I had two Zen Micro symbols on my desktop but I could only use the program with MTP)
    it worked fine.
    a few weeks ago I had the same problem, but after a few connectings and disconnectings it worked again.
    today this doesnt helped. I uninstalled everything what had to do with creative and then only installed new drivers and the newest applications (without the things from the cd).
    it still doesnt work.
    when I click on the "Zen Micro Media Explorer (MTP)" on the desktop I can see that my zen micro is connected. When I go to my playlists and click on one, it seems that my playlist is "empty". but in the mp3-player there is the playlist!
    when I click on my music folder, where all the music is I see the folders, but when I go into the folders, the folders are also "empty".
    what happened? I changed the usb ports--> doesnt work...
    what can I do in order to use my zen micro again on the pc. my zen micro works fine(playlists and songs work normally), but I have problems having connected it to my pc... I cannot copy songs and edit my playlists anymore. is there any way to edit the playlists via mp3-player without connecting to the pc?
    I hope you have a helping answer for me.
    Regards
    eX
    by the way: new forums look good Message Edited by expredator on 02-07-2005 09:22 PMMessage Edited by expredator on 02-08-2005 0:57 PM

    ok guys, I almost solved the problem. I used the rescue mode, used clean up, and now the folders are not empty and I can copy songs into my Zen Micro.
    But the playlists are "empty". Also when I want to create a new playlist it says that my mp3-player is not connected ?! But it is! I can copy files into it!
    I also cannot synchronize it with WMP0.
    I reinstalled software and it didnt help...
    So what can I do? It is connected but I cannot edit my playlists.
    Is there any way to edit the playlists via the mp3-player and not over the pc?Message Edited by expredator on 02-08-2005 :00 PM

  • It's possible work with ZEN Micro 6Gb without battery

    I would like to use the ZEN micro 6 Gb without battery, only plugged with the power adaptor ... it's possible?
    Thanks a lot

    Thanks <SPAN>Cat ,
    I have a friend with ZEN 5 GB and tell me the same (like Muvo2) ... it's extrange because my generic power adapter charges the battery correctly, but when i remove the battery and try to work directly with the power adaptor don't work.
    Please, I don't know if my problem it's my generic power adaptor ... anyboy have the ZEN Micro 6 Gb and can work with the player removing the battery and plugged it with the Creative ZEN Micro original power adaptor (not included with the product)?
    Thanks

  • Which OSX version works best with Logic Pro 7.2

    Hello everyone,
    Was hoping i could get some opinions on which osx version works best with logic 7.2
    i currently have OSX 10.4.2 but i would like to update at least to 10.4.3 (that is least required to run logic as stated in install manual)...
    should i go for 10.4.4, 10.4.5 or 10.4.6 ?
    which would run best with logic pro 7.2?
    thanks much everyone
    Quad G5 2.5ghz 3GB RAM   Mac OS X (10.4.2)  
    Quad G5 2.5ghz 3GB RAM   Mac OS X (10.4.2)  

    10.4.5 was rock solid for me, and three days into heavy Logic use at 10.4.6 is proving to be just as good.
    Get caught up, and go ahead and update to 10.4.6

  • Which iDVD version is compatible with OS X 10.7.4?

    Which iDVD version is compatible with OS X 10.7.4?

    Version 7.1.2 is.  This is the version bundled with the latest iWorks.  It has been around since 2011 as Apple has not updated the application.

  • How to query which Tcodes specified user used with one day?

    Hi guys:
      How to query which Tcodes specified user used with one day?

    Hi
    You can use transaction code ST03N.
    1. Go to tx code - ST03N
    2. Under "Workload" you can select your "Instance or Total" so that it expands and shows you Days, Week, Month.
    3. If you want to look at the transactions executed for a particular day, lets say, then double click on any day.
    4. At the bottom left you get "Analysis Views"
    5. Select & expand "User and Settlement Statistics"
    6. Double click on "User Profile"
    7. On the right side of the window you get a list of all the users
    8. Double click on a particular user you want to view the details of.
    9. The new screen will display the "Transactions/Reports Utilized by User XXX"
    If you wanna track which users executed a particular transacation then follow this:
    10. In "Analysis Views" expand "Transaction Profile"
    11. Double click on "Standard"
    You can view the list of Transactions and Reports.
    12. Double click on the Tx Code or Report you wanna check and it will show the Use of it.
    This will help you.
    Regards
    Sumit Jain
    [reward with points if the answer is useful]

  • Use a Zen Micro without the batt

    hello, i would like to know if there is any way to use a zen micro without the battery inserted via usb cable, because i have a 6gb micro that i don't use, the battery died, and i would like to connect it to my amplifier, but all the micros i have came without the power adapter,wich would work. My computer's motherboard suplies power trhough usb even when the pc is off, so i woudn't even had to turn it on to hear music, but, unfortunely, micro's don't work without battery when plugged to the usb cord, right?. i like to know if i can tweak something in the micro to do this...please help me...

    It remembers as long as it has power. This kind of thing has been discussed before, but not in this situation, but it's still the same....
    If you unplug your Micro before it's gone into it's deep sleep slumber mode, then it will forget, and start back from it's LAST deep sleep mode. However, if you let it go into the deep sleep mode, then you can unplug it, and put your battery into it, and it will be at the same point it was when you just turned it off.
    (by the way, not to thread jack, but this is my 50st post. Wow).

Maybe you are looking for