Which font supports the blackboard bold math symbols?

Simple question: I'd like to use the blackboard bold symbols for real numbers, natural numbers etc. Which font on the Mac has these and how do I get them in my text, e.g. in TextEdit?

Okay. I was just going by what 99.9% of the world's population would consider a blackboard.
Even looking for "blackboard font" in Google only leads you to various fonts which look like they were hand written on a chalkboard. Much like the one I linked to above.
What you want is referred to as an outline font. I know I have the font you linked to on Wikipedia, and quite a few others much like it, but I don't have the time to dig and see which ones they are right now.
However, a quick look an Adobe's site shows that Monotype Old Style Outline Bold is close to what you're looking for. Main search page if you want to look for others.

Similar Messages

  • Which driver supports the previous, next, last, first methods defined in jd

    which driver supports the previous, next, last, first methods defined in jdbc2.0?

    erm... all JDBC2.0 drivers.
    Check out http://industry.java.sun.com/products/jdbc/drivers u can do a search for JDBC2.0 Drivers.
    Hope this helps!
    Sam

  • Dodo does not support the Blackberry Bold 9900 - can this be fixed?

    Hi there,
    Could someone help me with this please? I have a contract with Dodo and they don't seem to be able to support the Bold 9900...is this correct? If so, can this be rectified please?
    Kind Regards

    Hi thewhitebear
    Each provider determines which BlackBerry smartphones they wish to sell and support.  Only your provider can remedy this.
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Which font supported in Arabic language

    Hi There,
    Can somebody please suggest me how to develop Arabic language course. witch font support in this language. i am using captivate 6.
    Looking forward for help.
    Thanks,
    Srikanth

    Language support is outside of Captivate. As long as you have the font installed in your system, it will work in Captivate.
    Sreekanth

  • Which ASD supports the Quad?

    I have a Power Mac Quad G5 which really seems to need a Thermal Calibration. Unfortunately, Apple Service Diagnostic 2.5.8 only seems to support the Dual G5 and models from 2004. I don't plan on running the tools unless they claim to support my computer (even though there is a built-in check for compatibility).
    Which Apple Service Diagnostic disc is appropriate for the final 2005 revisions of the Power Mac G5? I believe that there was only ever one model of the Quad, so hopefully it shouldn't be too hard to track down the right disc for this "ancient" Mac.
    P.S. I have cleaned nearly all of the dust out of the computer (there wasn't much), have pressed the reset button on the SMU, and purchased Hardware Monitor to confirm that the temperatures are within normal bounds. Since my fans will frequently run at too high an RPM, and sometimes get stuck on full after heavy CPU usage, I suspect that Thermal Calibration is the only way to fix my computer.

    I think I've read about a 2.6.1, perhaps that is it... not sure.

  • Which font does the Dictionary app use?

    I've got a new Mac Pro, and the font for the Dictionary app is incorrect - it's a sans serif, and pretty ugly, whereas before it was a much more attractive serif font. I did a clean install, so unless I've got a corrupted font, there's no reason why this should happen. Does anyone know which font the Dictionary app should use?
    Thanks,
    Kirk
    Mac Pro   Mac OS X (10.4.7)  

    Hi, Kirk.
    On my Mac, the primary font for Dictionary is the Baskerville family of fonts, which are serif fonts. The font itself is the Baskerville.dfont file in the Macintosh HD > LIbrary > Fonts directory. It also employs Helvetica Neue, a sans-serif font, for some elements of definitions.
    Dictionary does not have a preference for changing the default font, just the font size. The actual specification of Baskerville is done in the Default.csss file for Dictionary, in the Resources subfolder of the Contents folder of the Dictionary.app bundle (Control-click Dictionary and select "Show Package Contents"). Dictionary is actually a stripped-down Web browser and its documents are formatted in HTML. The Default.css file is the Cascading Style Sheet (CSS) used for formatting the appearance of Dictionary definitions, including the fonts to use by default.
    If you don't have the fonts specified in its CSS, it would substitute other fonts.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • HT203175 The latest version of iTunes freezes my computer whenever I try to open it. Needless to say, this is infuriating. I have Windows XP, which should support the latest version. I am particularly exasperated, because iTunes compelled me to download.

    iTunes compelled me to download the latest version, before I could complete a transaction (which, needless to say, was botched). I have Windows XP, and I cannot open iTunes now without freezing or crashing my computer. This is utterly frustrating, since I can't even play any holiday music, much less update my iPod.
    Can I uninstall, and reinstall the older version? I do not need all the bells and whistles, and I detest the new format (even if it were to run on my computer)?
    I'd love to be able to access my Xmas playlist someday.

    What didn't work?  Removing everything or just the older version of Bonjour?  Did you follow the instructions in the link I provided above to walk you through the process?
    Perhaps it would be a better idea to post this in the iTunes forums, since it is an issue with iTunes and your iPod Shuffle.
    https://discussions.apple.com/community/itunes
    B-rock

  • I have all my music on an external hard drive.  It is on iTunes on my old Mac mini, which cannot support the new OS, which in turn means I cannot get iTunes match. I have a new Air. What is the best way to get my music where I want/need it?

    anybody have any idea how I should get that music from the hard drive to the air without having it docked all the time?

    If you have iTunes Match, you don't need to use Home Sharing.
    Can I get that to work through Home Sharing?
    No. iTunes Match gets your music from the cloud. You upload from one computer and you can then downlaod to the other computer.

  • Does BDB support the access pattern which is initially random followed by sequential?

    Hi,
    I have a very large file (millions of records) that I will need to store as a db file. We will only do look up operations on the file so far. However, I would like the following data access pattern First, I'm seeking to a specific location in the file and then reading sequentially a number of records; then, again, I may want to jump to another specific location in the file and reading sequentially a number of records. The data will be stored in the db in sorted order. I know that BDB B-trees fundamentally store keys in sorted order and a value associated with that key. However, using BTree will give me O(log N) each time when finding a specific location. Is there a way that I can combine hash and BTree to improve the performance. I.g., using hash index to find the specific location in O(1) and then do sequential reads (this can only be done by using BTree). So, I am wondering if I can accomplish this task in BDB? Thank you so much for any suggestions!!!

    Since you mention the hash access method, I assume you're posting to the wrong forum.  This is the forum for BDB JE, which only supports the Btree access method.  The BDB product (C-based product with Java JNI API) has a hash access method, so you should probably re-post your question to the BDB forum:
    Berkeley DB
    --mark

  • Blackboard Bold Font required

    Hi,
    I'm looking for this font. It's called Blackboard Bold.
    http://en.wikipedia.org/wiki/Blackboard_bold
    Does anyone know where I can download it or how to unicode it for use on a Mac?
    Cheers,
    Martin

    Martin --
    This is from Wikipedia:
    +Blackboard bold is a typeface style that is often used for certain symbols in mathematical texts, in which certain lines of the symbol (usually vertical, or near-vertical lines) are doubled. The symbols usually denote number sets. Blackboard bold symbols are also referred to as double struck, although they cannot actually be produced by double striking on a typewriter. In some texts these symbols are simply shown in bold; blackboard bold in fact originated from the attempt to write bold letters on blackboards in a way that clearly differentiated them from non-bold letters.+
    If you're looking for an outline font that looks like the letters in your example, you might want to go to Myfonts.com of Fonts.com and search for outline fonts.
    Tom G. does not make mistakes.
    Just so you know.

  • Imusing firefox29 version.Some browser likes (chrome,IE,Safari) are supported math symbols likes ((-)minus,(+)Add,(*)multiply,degree,etc)firefox not suported.

    Math symbols are not supported in firefox..reply im'ly..

    see the below image (x = x²) symbols not supported

  • How to display a Math symbol with Subscript(like  "Xad", make the "ad" be Subscript )

    How to display a Math symbol with Subscript(like  "Xad", make the "ad" be Subscript )
    I need to show "Xad"(ad is Subscript )
    I try to find the letter subscript......but ,Unicode set is not have.....
    I try to use  X<sub>ad</sub>   show it  whit Text.htmlText,   but is not used,   I think Flex's HTML is  not support the <sub> mark.
    can you tell me , how to display a Math symbol with Subscript(like  "Xad", make the "ad" be Subscript )
    thank you very much.....

    http://blog.ggshow.com/index.php/how_to_use_subscript_aamp_superscript_in?blog=11
    http://jasonbejot.com/superscript-and-subscript-in-actionscript
    and thank you very very muck

  • The font in the UI is mostly unreadable symbols

    The font is almost entirely in unreadable symbols with a minor exception. I don't recognize which font this is. It has made doing even basic things very hard, especially because I'm used to different browsers.
    Screenshots Album:
    http://imgur.com/a/qpwGo#t4NyeiK
    Here is what I know:
    * Oddly now and then there is a line of readable text as can be seen in the second screenshot
    * The problem persist in safe mode
    * It persists after I tried to change the language to a different English version or Slovenian, it is currently set to New Zealand English
    * Resetting Firefox to default didn't help
    * I'm using Firefox 29.0.1
    * The OS is Microsoft Windows 7 Professional , System Locale: sl, Input Locale: en-us
    Complication unrelated to the core problem:
    I don't have admin rights on this machine for at least the rest of this week and the admin is away. And I really need to get some work done on it. :( I will still appreciate solutions and ideas that require admin rights tho, at least it will work next week!
    Any ideas?

    Looks that you have ended up with a different Firefox locale and no longer have the en-US version.
    You can find the full version of the current Firefox 30.0 release in all languages and for all Operating Systems here:
    *http://www.mozilla.org/en-US/firefox/all.html

  • Does the later 2009 MacBook support the Apple DVI to Video Adapter (s-video). I want to connect it to an old tv which does not support HDMI. Any suggestions?

    I have a late 2009 MacBook which I want to connect to an old LG tv. The tv does not support HDMI it only has the (red, while, and yellow) ports. Sorry I dunno the exact name for it.
    So I was thinking of using the Apple Mini DVI to Video Adapter (s-video), link below...
    http://store.apple.com/Catalog/dk/Images/M9319_screen.jpg
    But I'm afraid that the MacBook might not support the adapter.
    Can anyone give me a solution for this? Is there an alternative way of doing this? I'm kinda new to apple display adapters.

    The Late 2009 model 6,1 has a Mini DisplayPort not the Mini-DVI. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When the System Profiler comes up check the Model Identifier.
    Composite is the name for the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs. If you want to use the Composite input on your TV there’s no Mini DisplayPort to Composite. You’ll have to get a Mini DisplayPort to VGA adapter http://www.amazon.com/s/ref=nb_sb_ss_i_1_19?url=search-alias%3Delectronics&field -keywords=mini+displayport+to+vga&sprefix=mini+Displayport+to and a VGA Adapter to TV S-Video RCA Out Cable for PC Video. http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7
    Only the Yellow plug or the S-Video plug for video will work. For sound you'll also need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV  http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable

  • I have a G5 which I intend to keep.  Now that I have updated my iphone 4s to iOS 7.0.  I cannot add music to my iphone or upload photos to iphoto.  I have the last itunes 10.6.3. which was supported by apple.  itunes will not interact with my iphone on an

    I have a G5 which I intend to keep.
    Now that I have updated my iphone 4s to iOS 7.0.
    I cannot add music to my iphone or upload photos to iphoto.
    I have the last itunes 10.6.3. which was supported by apple.
    itunes will not interact with my iphone on any level.
    Apple made all the equipment I use.
    Bentley and Ferrari etc do not stop making parts for their cars?
    The least Apple could is.
    A. Update itunes to run on a G5
    Regarding iOS 7.0 you have totally lost the plot.
    We buy apple why?
    Quality.
    Intuitive interface.
    Stable software.
    Design.
    All that Steve Jobs consider sacrosanct.
    Quality is about ongoing support longevity of product.
    Its not about trying to sell to every person on the planet, others are way ahead of you.
    So try respective the customers you have, it wont be long before theirs a better operating system and your lead in hardware is marginal. 
    Regards
    Glyn Evans
    My post on facebook this morning.
    If you have an iPhone or iPad do not update to ISO 7 unless you want an operating system that looks like windows 8. The graphics looks like it was designed by a artistically challenged mongoose and the operating system is not intuitive something apple users expect. Overly complicated ugly and generally change for the sake of apples paranoia since the death of Steve Jobs.

    You need to update iTunes to 11.1 on your PC

Maybe you are looking for

  • PSE Elements 9-convert to black and white not working.

    I recently bought my wife a new HP computer with Windows 7 64bit and Photoshop Elements 9 to go with it. She has not had any problems up until today.. It seems when she attempts to convert a picture into black and white, photoshop freezes up. Sometim

  • Sound Preferences Problem

    My USB Headset shows up twice for both the input and output in the Sound Preferences panel. If I disconnect it from my hub, one entry disappears from the list but the other one remains. It works for most things when I select the right one from the li

  • V7.3 versus 8i

    Off the wall question for off the wall results I'm seeing. Is it possible to produce different results if calling Oracle stored procedures with different front-ends/versions of the middleware? For example, using PowerBuilder 5.0 with Objects to Oracl

  • Masochist thread for Intelligent Agent Users

    Yes, I too am one of those fools trying to get the Intelligent Agent to work. I don't have any problem starting it, I just can't seem to get it to do anything!. Anybody else getting "nsopen: unable to open transport" in their trace file. I have had e

  • Cannot add print server role

    Hi, I have a server in a Citrix farm where I can't add the print server role. It was no problem on the other servers in the farm. I get this error: The specified service does not exist as an installed service (0x80070424) Restarting the server doens'