Which fonts are in the Adobe 'Font Folio Select' and can be embedded in software and apps for distri

Hi,
I need to select a few fonts for our client to choose from that can be legally embedded into their software for distribution.
After reading this article:
http://blogs.adobe.com/jlockman/2011/06/06/fonts-and-where-can-i-use-them/
it sounds like there is an Adobe 'Font Folio Select' that contains fonts we can use but I can't find any information about where to get hold of it.
I have spent hours hunting for fonts we can legally use and read lots of EULAs and still have no idea what fonts are available to developers!
Any help would be greatly appreciated
Thanks

Thanks for reaching out to the Adobe Type Team.
While the James Lockman blog you referred to is correct that our product, Font Folio Select, contains only fonts that we control and for which we can offer the broadest rights, it is mistaken in its description of how it is offered.  Font Folio Select is actually a collection of fonts which we offer for server usage - for customers who need fonts for automated printing services, or for web based services which offer a font selection.  I'm very sorry for the misinformation.
Font licensing for applications is something for which we can provide you a direct quote.  If you would like to email me directly at the address listed below, I can get you in touch with a sales associate who can help you.  Additionally, if you provide me with a list of fonts you are interested in licensing, if there are fonts which are not ours, I can also provide you with foundry contact information so you can reach out to them directly.
Caleb Belohlavek
Principal Product Manager / Type
Adobe Typekit
[email protected]

Similar Messages

  • Which fonts are installed with Adobe Flash CS3? Which fonts are installed with Illustrator CS3?

    Which fonts are installed with Adobe Flash CS3? Which fonts are installed with Illustrator CS3?

    Does this mean that if for example I purchase and install Adobe Flash CS3 it will install all the fonts listed under CS3 in this list: http://blogs.adobe.com/typblography/fonts-installed-by-adobes-creative-suite#CS3 ??
    Thanks

  • Are the Adobe fonts that supports Greek works or not?

    Dear All,
    I'm looking for a greek support fonts, so I searched the Adobe fonts and reached this page:
    http://store1.adobe.com/cfusion/store/html/index.cfm?store=OLS-US&event=searchFonts&type=c ategory&code=greek&cat=classification
    I than copied 3 words I received in Greek and paste them into the "Enter sample Text" and pressed on the "View" button.
    These are the words:
    Αφιερωμένο σε όλους
    Almost all results came with question marks instead of Greek Characters.
    So,
    Are these fonts supports Greek or not?
    Thank you
    shlomit

    Hi Schlomit,
    I don't have the Adobe Text Pro to test, but of the others I see listed outside collections in the screen shot, the only one that failed to show all of your characters was  my version of Trajan Pro, which actually surprised me since it's based on classical Greek.

  • Purchasing Adobe Font Folio 11.1 through Transactional Licensing Program (TLP) can have access to download the Adobe Font Folio 11.1 package from Adobe.

    Purchasing Adobe Font Folio 11.1 through Transactional Licensing Program (TLP) can have access to download the Adobe Font Folio 11.1 package from Adobe.

    Err, so I thought this would be an easy question...not so?

  • How do I install the Adobe Font Manager?

    How do I install the Adobe Font Manager for CS4?

    Aside from what Bob said, what are you trying to do, and why do you think you need to install ATM?
    Peter

  • New release of the  Adobe Font Development Kit for OpenType

    A new release (v1.6.6148) of the Adobe Font Development Kit for OpenType has just been posted at:
    http://partners.adobe.com/asn/developer/type/otfdk/main.html
    This includes some minor changes in the feature file syntax, slightly better documentation for the MakeOTF tool, a complete installation procedure for Mac OSX 10.2.4, addition of the "Unicode and Glyph Names" documentation under the FDK license, and minor bug fixes.
    The most important change has to do with the handling of contextual substitution layout rules. MakeOTF now includes an option to create these either correctly, according to the OpenType specification v1.4, or in the older format used by InDesign v2.0 and earlier. This option is now tied to some additional logic, such that if you build a font to be compatible with InDesign v2.0 and earlier, some special text will appear in the name table named-id 5 "Version" . This text will serve as a marker that the font uses the InDesign v2.0 compatible format for these rules, and will consequently work with not only InDesign 2.0 and earlier, but also with any future programs that know to recognize the special text.. The special text was chosen in order to permit all known older OpenType fonts which have contextual substitution layout rules to keep working under future revisions of Adobe programs.
    This meant to be only a short-term solution. We do not anticipate that non-Adobe products will necessarily pick up this special case logic, and we do expect to revise the Adobe Type Library OpenType fonts to correct the rule format, once the next version of InDesign has been out for a few months
    The special case logic is documented in the FDK Release Notes, under build 5959. The special case is triggered when a font matches the following criteria:
    if (the name table name id (1,0,0,5) exists:
    if the name ID string matches the regular expression
    "OTF[^;]+;PS[^;]+;Core 1\.0\.[23][0-9].*":
    the font has In Design 2.0 format
    else if the e name ID string matches the regular expression
    "Core[^;]*;makeotf\.lib":
    the font has In Design 2.0 format
    else the font has the correct format.
    Example of string 1: "OTF 1.006;PS 1.004;Core 1.0.35"
    Example of string 2: "Core 1.0.38;makeotf.lib1.5.4898"
    Another example of string 2:"Core;makeotf.lib"
    Fonts built with FontLab by default have name id 5 strings in the format of example 1, although it is possible to change the value.

    I noticed two minor things with the windows version of MakeOTF.
    * If a fatal error occurs when using the GUI mode for compiling, the output zero sized binary otf is locked in the file system until you exit the application. This doesn't happen when using the command line interface since the application process always is terminated after each compilation.
    * When using the command line interface, or when executing MakeOTF from a script, the "parsing warnings" argument "+w" seems not to be piped to the compiler library after invoking MakeOTF. The "parsing warnings" argument works fine when calling a fpr project file from a script or when compiling in GUI mode.
    /mårten

  • I can't see the font names in the TYPE - Font pull down menu?

    I can't see the font names in the TYPE - Font pull down menu?  The fonts are in there, but I can only see the name as I scroll past each one - almost like they are white text???

    view,
    I believe this may solve it:
    Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
    It was first presented in this post #15 by TheUlser:
    https://forums.adobe.com/message/6854594#6854594
    It has been described on this Adobe page:
    http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/
    It may also depend on the monitor, as it appears from post #29 by Loncar in the same thread.
    Obviously, this also influences some other things so there may be a downside to it.

  • My updates are failing.  Adobe application manager may be damaged.  I have downloaded and installed a new copy and the problem persists.   Please help.

    I am trying to update Photoshop CS6 in order to read my camera's RAW files.  It is a camera that is supported by Adobe Photoshop CS6.  However, when I try to get the Adobe Application Manager to update the software, it fails to do so.  (The spinning wheel tells me it is checking for updates and then quits, saying that "Update Failed - Updates could not be applied.  Adobe Application Manager may be damaged.  Download and install a new copy of Adobe Application Manager.")
    I have tried to reinstall the Adobe Application Manager 8.0, which gives me the following error message "We've encountered the following issues.  Installer failed to initialize.  Please download Adobe Support Advisor to detect the problem."  However, when I go to the link provided to download the Adobe Support Advisor, this piece of software NO LONGER EXISTS. "
    The Adobe Support Advisor has been discontinued
    The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."
    So, I have gone to the forums and took the recommended step to update my software manually - getting the update Photoshop_CS6_13_0_6upd-2.dmg.  However, this update also fails stating that my Adobe Application Manager may be damages.  Download and install a new copy of Adobe Application Manager.  Which puts me right back where I started.  
    I have also taken the step of completely reinstalling Photoshop CS6.  This did not solve the problems outlined above.  
    Please help!

    reset your preferences:
    dreamweaver:  http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
    flash:  http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
    indesign:  https://forums.adobe.com/thread/526990
    lightroom:  http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
    photoshop:  https://forums.adobe.com/thread/375776
    if that fails, uninstall ps, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall.  then use the manual updates.

  • How to find out which objects are at the end of the datafiles

    My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
    For that how to find out which objects are at the end of the datafiles.

    >
    My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
    For that how to find out which objects are at the end of the datafiles.
    >
    You may want to copy this and add it to your toolkit
    See 'What's at the End of the File?' in this Tom Kyte article from the Sept 2004 Oracle Magazine
    http://www.oracle.com/technetwork/issue-archive/o54asktom-086284.html
    And this AskTom blog shows you how to generate a script containing ALTER statements toresize your datafiles to the smallest possible. You can 'pick and choose' from the ALTER statements to do what you want.
    Then of course, you can use techniques from this article by Oracle ACE, and noted author, Jonathan Lewis
    http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/

  • In which table are stored the data of a set created by GS01?

    Hi All,
    could anyone tell me in which table are stored the data of a set created by GS01?
    Thanks

    Hi,
    It's stored in SETHEADER, SETNODE and SETLEAF tables.
    Regards,
    Eli

  • I purchased the Adobe pdf Pack to combine 50 PDF files to one and when I select them from my folder it claims "the files are not in a format not supported for conversion to PDF".  They already are pdfs, what am I doing wrong?".

    I purchased the Adobe pdf Pack to combine 50 PDF files to one and when I select them from my folder it claims "the files are not in a format supported for conversion to PDF".  They already are pdfs, what am I doing wrong?

    Moved to Adobe PDF Pack (read only)

  • How do I get the truetype font to show the actual font in the font list

    I am trying to find an option somewhere in Yosemite, where I can elect to have the font list show the actual font face in list format.  It has been there prior to the Yosemite update, but now the list shows all fonts in the same font face.

    ohyes wrote:
    once again you've saved the day - thank you so much - ohyes (Barb)
    Good computing ohyes!

  • How can I know which photos are in the library was used in each album I have created before.

    How can I know which photos are in the library was used in each album I have created before?
    I have many photos in the library folder of iPhoto, but actually I don't know which photos were used in my album.
    Is there any method to find this?
    Thanks.

    Album or Book?
    If Album you can find the ones not already used:
    File -> New Smart Album
    Album -> is not -> Any
    Regards
    TD

  • Which application area does the SHOP VISIT NOTIFICATION cover under..

    which application area does the SHOP VISIT NOTIFICATION cover under..
    if possible pass me some useful information reg this SVN.
    i require this information very urgent...

    Ok, I think I'm on the right track now. I was finally able to inspect the HTTP requests coming in to my destination page, and I do see the notification post coming in, with the expected form data. Here's a sample of the HTTP request that came in after submitting a new quote on my site, in case anyone's interested.
    JSON:
    {"connection":"keep-alive", "content-length":"32", "content-type":"application/x-www-form-urlencoded", "host":"notification.azurewebsites.net", "max-forwards":"10", "x-liveupgrade":"1", "x-original-url":"/", "x-forwarded-for":"192.150.2.7:17242", "x-arr-log-id":"ae52537a-df3b-4bc5-a386-f652c9a03ef2"}
    { ObjectID: '4448953', ObjectType: '2008' }

  • How can I find which applications are using the most power?

    I have recently noticed a full charge of power doesn't last as long as it used to on my iPad 2.  Is there some way to determine which applications are using the most power?
    I have been monitoring my home network router accesses and have noticed the iPad logs accesses every 15 seconds.  This only happened recently.  It had been well behaved and only accessing once or twice a day before.  I installed the most recent iTunes upgrade, per suggestions during a Sync.  The problems seemed to occur after this update.  I have gone through all the settings and have minimized the applications requiring higher power (I switch off the location services unless I'm away from home.  Likewise, I turn off my cellular carrier unless I'm away from home, etc.)
    In short, how can I maximize my power usage (aside from turning it off)?
    Thanks.
    Dave

    Thanks for responding so quickly.
    I'm really trying to find out why the battery is depleting much faster than it used to all of a sudden.  I used to be able to put a full charge on it and it would last about 5 to 6 days with normal use (normal for me).  Now that battery only lasts about 2 to 3 days with the same use.
    I DO recharge it when it needs to be charged but this is indicating there is something else (new) that is causing the power drain.

Maybe you are looking for