Which Forum for Wireless Mu

Hi,
I have a potential problem with my recently purchased Sound Blaster Wireless Music (which is cool but I'm not sure which forum to post the question in.
Please could someone point me in the right direction?
Cheers,
James

JamesHA,
Actually since it is a Soundblaster Wireless Music we have directed most users to the Soundblaster board for it. This is one of our "mixture" products where it could fit in a lot of places so it was wise to ask where to best ask. Soundblaster is the place.
Jeremy

Similar Messages

Which forum for BCS?

Hi All,
Which forum is to be used for SEM-BCS discussions?
It's half Financials and half BW nowadays!

Hi,
See Marc's reply here:
SEM Topics like BCS and CPM -> Check SAP Community

Which forum for LenovoEMC / IOmega NAS units?

There seems to be three fora for these NAS devices.
On the index page, this one seems to be only for PX devices but that doesn't show up in the cookie crumbs which say "Lenovo Community > Network Desktop Storage > LenovoEMC Network Desktop Storage"
And some of the messages are clearly about the IX series.
Can we have clear guidlines for which forum to use and some nudging to see that they are followed? Perhaps the fora should be combined.
Solved!
Go to Solution.

Hello HughR
The forums are separated in the same way as in the support page, with the addition of moving rackmount devices to the enterprise forums.
-LenovoEMC: LenovoEMC Network Desktop Storage
current LenovoEMC px desktop units (lifeline v4.x.x)
-Lenovo: Lenovo Network Storage
Current Lenovo ix and ez media desktop units (lifeline v4.x.x)
-Iomega: Iomega Desktop Network Storage
Legacy ix class devices, pre-LifeLine os Storcenter, or other legacy Iomega network hard drive devices.
Iomega branded px devices technically could go here, however the LenovoEMC forums would be best suited. Same for any Iomega ix or ez media device, the Lenovo section would be better suited. ( more of a catch-all section) (lifeline v2.x-3.x)
The Enterprise product section has the following:
-LenovoEMC Rackmount: Lenovo EMC Rackmount Storage
Current LenovoEMC px rackmount devices (lifeline v4.x.x)
-Iomega Rackmount: Iomega Rackmount Storage
Legacy Iomega ix/px or other pre-LifeLine OS rackmount network storage devices. (lifeline v2.x-3.x)
Bottom line:
If you have a current PX device use the LenovoEMC destop/rackmount sections accordingly.
If you have a current IX or EZ Media device, you should use the Lenovo forum section.
If you have a legacy Iomega device the Iomega desktop/rackmount sections should be used
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Which Forum for "Repair Permissions" problems?

To which Forum do you submit "Repair Permissions" problems?

Thanks, Luke.
My permissions keep coming out as below. Doesn't seem right to me.
Steve
Repairing permissions for “Macintosh HD”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "usr/bin/setregion" has been modified and will not be repaired.
Warning: SUID file "System/Library/Printers/IOMs/LPRIOM.plugin/Contents/MacOS/LPRIOMHelper" has been modified and will not be repaired.
Permissions differ on "System/Library/CoreServices/RawCamera.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions repair complete

Which download for wireless development?

I've found a J2ME , j2ME wireless toolkit, KVM, CDLC, MIDP for Palm OS downloads.
I'm confused about which one to use. I've trying to develop for a Palm Vx, and plan to use prc files.
I've already installed the jdk 1.3.1. What else do I need to install to develop java apps for my Palm Vx?
Thanks,
Pam

I can't answer your question, but you might find the info at:
http://developer.sprintpcs.com/index.jsp

Which Airport for wireless dialup?

I am moving and my new area does not have DSL. I will need to use a dial up service and I my Ibook G4 has an Airport Extreme card that I have been using with my DSL modem. I will need to buy an Apple Airport Extreme Base Station or the oval shaped one with a modem...Which one do I need to use my Ibook wirelessly? thanks!

You'll need the saucer-shaped Airport Extreme Base Station.

Which forum for EM 10g Db Control questions?

It seems as if Enterprise Manager 10g is getting more popular. I see more and more threads in Database forums about the web-based OEM... while there is a dedicated EM category and forum (but forum name includes Grid Control).
Where should discussion or questions threads about Database Control be posted? Does Oracle have an idea about this?
Considering that Database Control is a single-database, cut-down version of Grid Control, should we try to focus the Enterprise Manager?
Database - General forum might be the logical place to post. After all, somebody new to Oracle "just" installs Database and problems with "web page"/EM is probably seen as problems with the database.
Both forums lacks a description (as seen on main forum page, Category pages or forum listing).
Could the use of the forums be made any clearer?

Hej Fredrik
I agree that we should have a dedicated section for all the EM questions in the Grid area of this forum in order to separate all the other grid requests.
you got my vote also on that post.

Which card for wireless?

I have a duo processor, mirrored G4 desktop and would like to install a wireless card so that I can connect to my airport base station. Which airport card should I use, or is there something better out there. I only have firewire 400 capability.

Of course, there are a few of us G4 owners with the "FW800" Dual 1.25 and Dual 1.42, which also support Airport Extreme. I actually have both a Dual 1.25 with Airport Extreme Card and a Single 1.25 Dual-Boot G4 with regular Airport card. I'd agree with the earlier post that Extreme G is significantly faster than B. My router is the older Airport Extreme (round) unit. Regular Airport is quite usable, but the issue I think is value. The few vendors that still sell an original Airport card seem to charge an arm and a leg. If your Mac doesn't support at least Extreme (the standard now is "N"), it probably would be well worth it to explore some way to get faster wireless, maybe through a PCI card or via Ethernet. And probably pay less also.

Which PI is better for Wireless, 1.4 or 2.0?

Simple question:- Which Prime Infrastructure is best for managing a Cisco wireless solution, Version 1.4 or 2.0?

Hi Simon,
Of course 2.0 version is new and hav many other features which PI 1.2 dont have.
Example:wts new in 2.0
Extended Device Support and Scalability (Wired / Wireless)
_With Prime Infrastructure 2.0, you can manage up to 13,000 wired devices, up to 1,000
controllers, up to 20,000 Unified Access Points, up to 3,000 autonomous Access Points, and up
to 1,000 Network Analysis Modules.
– Day-1 support of new Cisco devices and software releases helps ensure up-to-date coverage
with no manageability gaps, which is provided through monthly IDUs-Incremental Device
Updates.
Guided Workflow for Day1 Deployment
– Streamlined workflows facilitate design, deployment, and operational lifecycle tasks that align
with user roles.
Plug and Play for Wired/Wireless Devices
Out-of-the-Box Best Practice Configuration for Optimized Deployment of Cisco Features and
Technologies
– Model-based simplified workflow to assess the network for Cisco TrustSec 802.1x readiness
and facilitate the deployment of network technologies and solutions, such as one-click AVC
Configuration from device work center, Cisco TrustSec 802.1x and Zone-Based Firewall (ZBF),
all based on Cisco best practices.
Support for Wireless LAN Controller (WLC) Release 7.4
want to know more:
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/release/notes/cpi_rn.pdf
As per my exp....PI 2.0 is bit slow then PI 1.2.
Regards
Dont forget to rate helpful posts

Make forums for moderators only available for moving for forums which Moderators understand

I see currently many questions moved by moderators to forums which are for 100% not related to the question.
Can this be avoided by giving moderators only rights to access forums from which they the topic understand.
It seems now they took the first one for which they have access rights to move, to get it out of their forums.
Success
Cor

Cor,
As far as I know, moderators can move to any forum.
I am not a moderator in a technical forum, so my experience may be different, but I tend to move to the "Where is the question for..." forum if I have no idea where a question belongs, and then let someone else suggest the right forum.
If I have an idea where the question belongs, I will still move to the "where is the forum" forum, and suggest the right forum.
If the OP requests, I will then move to the proper forum.
If someone else who has clear knowledge of the issue comes along and suggests a post be moved to a certain forum, I will do that as well.
I've done that on your suggestion before as well :)
I think that when you see issues of posts being moved to the wrong forum, and you believe it's done just to get the post pout of a forum, rather than to provide help, that you email a link to fissues, with your reasoning - it's the best way I know of
to get the forums owners involved.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Which forum i select for access the hardware through ports

please guide me in which forum i post the questions about javax.comm
to use the ports to control the hardware
thanks

Pick any one you like. Doesn't matter much anyway, nowadays we even have to answer JBuilder questions here.

Error setting up HP Photosmart B109n for wireless from Mac

I am trying to configure my B109n for wireless printing but the setup utility keeps crashing. Printer is USB connected but I want to move it to another part of the room. I am runnin OSX 10.9.2.
Process: HP Setup Assistant [8324]
Path: /Applications/Hewlett-Packard/*/HP Setup Assistant.app/Contents/MacOS/HP Setup Assistant
Identifier: com.hp.SetupAssistant
Version: 2.3.12 (2.3.12)
Code Type: X86 (Native)
Parent Process: launchd [163]
Responsible: HP Setup Assistant [8324]
User ID: 501
Date/Time: 2014-04-02 12:58:57.895 +0100
OS Version: Mac OS X 10.9.2 (13C64)
Report Version: 11
Anonymous UUID: CD4CC37E-A4CF-B07A-F990-87DC5CF774FD
Sleep/Wake UUID: 43C5067B-3BE5-4FF0-9A93-860D83D611CB
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
Performing @selector(performContinue from sender ACMCustomButton 0x3592b0
Dyld Error Message:
Symbol not found: _WirelessIsAvailable
Referenced from: /Applications/Hewlett-Packard/*/HP Setup Assistant.app/Contents/Plugins/WiFi Confirm Settings.WiFiPlugin/Contents/MacOS/WiFi Confirm Settings
Expected in: /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
This question was solved.
View Solution.

Hi PaulEich,
Welcome to the HP forums!!
I see from your post that you have a Photosmart B109n that you need to connect wirelessly to your Mac that is running 10.9. I will absolutely do my best to assist you with this!
I believe the reason the software is failing is because it's not intended to be used with the 10.9 operating system. At this time HP does not have full feature software released, you would have to install it via the Apple Updates. Which leads to the next issue, how to connect the printer to your wireless network. To do this, we will have to connect the Mac to the printer to get things setup properly
Please follow this post I did, that has worked for others, to get the printer connected to your wireless network. To restore the network defaults on your printer, please press the Setup option, then Network, then Restore network defaults, followed by Yes. Then to print off the Network Configuration page on your printer please follow the steps below:
On the control panel, touch the button ( ) next to Scan . The Wireless/Scan menu displays.
Touch the button next to Wireless Menu .
Touch the button next to Wireless Settings .
Touch the button next to Print Network Configuration Page .
Touch OK . The Network Configuration Page prints.
Let me know how this goes for you!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Aperture, MobileMe, AppleTV...Which Forum?

Hopefully this forum will work for me...
Anyone else having issues with Aperture images published to MobileMe that don't show up on AppleTV? Or at least gives you trouble on AppleTV?
First of all the MobileMe albums don't show up UNLESS I publish an image via iPhoto. It's like iPhoto "pushes" the Aperture images through. When I publish one photo via iPhoto, my Aperture/MobileMe albums show up. Un-publish the iPhoto image and the Aperture albums disappear from AppleTV.
THEN..... when I get the Aperture/MobileMe albums to show up (because I published one from iPhoto), AppleTV won't allow me to view them because it keeps telling me the login-in formation is incorrect--but it's not. I have the albums protected and locked on MobileMe and that's why I have to enter it on AppleTV. Whatever, I cannot view my MobileMe albums on AppleTV at all, no matter what I do. I will also post to the other forums, but I wanted to see if anyone here is familiar with this issue.
I hope this makes sense. Any help, anyone?

Not 100% about this solution but from what I've read this could be one solution if it's more important to show the images on TV more immediately.
1. Eye-Fi cards all now have direct mode which enables them to automatically transmit jpeg (Connect X2) and jpeg / RAW (Pro X2).
2. If you had a Nikon D7000 with dual card slots, you could save a RAW file to one card for importing into Aperture later and save a jpeg to the Eye-Fi card slot for wireless distribution.
3. You can wirelessly send the jpegs to an iPad2 from the Eye-Fi card using Direct Mode.
4. With an iPad2 you can mirror the iPad's screen onto an Apple TV (the small black ones) and therefore as soon as the jpeg is sent to your iPad it can be viewed instantly and automatically on your Apple TV.
5. This should also work for jpegs if you have a D90 but I'm not too sure about what happens if you shoot RAW and jpeg on the D90.
It's a possible solution and food for thought anyway...
Clown Guy

Where is the official documentation for Wireless OTA Enterprise App Distribution?

Where is the official documentation for Wireless OTA Enterprise App Distribution? It used to be here:
http://developer.apple.com/library/ios/#featuredarticles/FA_Wireless_Enterprise_ App_Distribution/Introduction/Introduction.html
The above link is present in many posts in these forums (cf. More Like This below this question.
The information I seek may also have been here:
http://support.apple.com/kb/index?page=answerlink&url=http://manuals.info.apple. com/en_US/Enterprise_Deployment_Guide.pd…
The article in question had official details on
the itms-services:// link,
the app manifest file format and
the general information.
Currently I cannot find anything official on enterprise app distribution - only third party information. Has something changed, or is this a documentation glitch? Surely wireless OTA enterprise app distribution is still available via the enterprise developer program?
Note: We currently use this for one of our enterprise clients. But before recommending other clients to join the enterprise developer program, we would like an official citation on whether this mechanism still exists.

OK, the link in my question is no longer a 404. It's been replaced by a redirect to a new iOS Enterprise Deployment subsite which has been remade for iOS 8.
http://www.apple.com/iphone/business/it/deployment.html
My actual question about the technical reference is now located in the iOS Deployment Reference section of Apple Help:
https://help.apple.com/deployment/ios/#/apda0e3426d7

I have a TC which is connected wirelessly to my router. I would like to connect a mac in another location via ethernet to the TC. I can't seem to get it to connect. Am I missing something?

I have a virgin Superhub which serves my wireless needs throughout the house. I have a Timecapsule which connects wirelessly to the router with no issues. I can backup my MBP over wireless easily. I have now got another machine in a different part of the house that I would like to connect to the network. It doesn't have wireless so ethernet is the only option. I have a number of options 1) run cabling - not really possible 2) buy a powerline network system or 3) use the timecapsule to connect to the network/internet.
I like option 3 because
(a) - I don't have to spend any more money and
(b) - my wife wont complain about cables also see (a)
Should using mixed wifi and ethernet clients on a timecapsule work? if so is it a feature I can use out of the box so to speak?
Thanks

Should using mixed wifi and ethernet clients on a timecapsule work? if so is it a feature I can use out of the box so to speak?
Thanks
No a TC cannot do what you want.. it is now in dumb stupid wireless join mode.. and it turns off the ethernet ports.. in case you want to use the TC as a wireless bridge to multiple clients which is plainly wrong.. (only airport express is allowed to do this since it has only one ethernet port).
Welcome to Apple. (The plainly wrong above is a figment of Apple imagination.. of strict network protocols.. but unhelpful for a home device. maybe also to encourage sales of expresses.)

Which Forum for Wireless Mu

Similar Messages

Maybe you are looking for