Which Groups are used?

Hi everybody!
I have the issue that a colleague of mine synchronized a whole bunch of ldap-groups into vibe. The Problem is that I want to clean the system up now, but I don't know which groups are in use and which are not. Is there a way to see a list of used groups or something like that?
greetings lJack

not directly. you can look in the access rights of a folder which group is connected to it. otherwise you have to build a sql script on database with the id of groups relating to the binder_id of a workspace. depending how large your installation is.

Similar Messages

How can i determine which devices are used at the moment?

Hi all,
I am designing an interface with LabVIEW for uing agilent devices. My work colleagues will use this interface. I want to determine which devices are used at the moment and if I determine used device, i will add automatically device names to interface's main vi. So all my work colleagues can see on the program which devices are used by another colleague. This devices are connected with GPIB. İ want to learn is there any function on Instrument I/O palette.
Thanks,
Omer
Solved!
Go to Solution.

Hi Omer,
so those devices are connected to the PC with a GPIB connection. Will your collegues run several DAQ programs at the same time?
GPIB-devices being controlled by PC don't have a "in use"-signal. They wait for commands, execute them and send an answer. When you start to control them using two programs they may respond to both programs, mixing up settings/measurement values and so on.
That being said: In MAX you can see all devices connected to your GPIB port. You could scan the GPIB port using VISA commands in your program. You might even try to access a certain device by it's VISA alias. I really don't know if you will get a "device nopt available" error message when that VISA alias is in use by a different program - but you might do a quick test on your own…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to find out which BADIs are used

Hi Experts,
Is there any tcode where I can give the transaction or program name and find out which BADIs are used in that transaction.
thanks
sankar

Dear Sankar,
You can first check available BAdis and then go to SE19 to see what all have been implemented.
Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
REPORT ZTEST.
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Alternatively, you can do the following:
1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
ull get a list of Enhancements related to that Componene....
5. Choose which ever enhancement will suit ur business need ..
6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
For a user exit......
Finding whether there is any User Exit or not for tcode VA42
1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
Hope this will help.
Regards,
Naveen.

How to determine which processes are using a module?

I want to find out which processes are using a kernel module.
However this info is shown neither with ``lsmod'' nor in
/sys/modules/<mod_name>/.
It's needed to reload certain modules which are acting buggy,
in a bash script. Right now I just keep a list of processes which
use the module and try to kill'em all, not exactly a beautiful
solution.
To work around it I compiled a kernel with
``CONFIG_MODULE_FORCE_UNLOAD=y'', however actually
trying to unload anything with this results in an unstable system.
Suggestions?

After successfully syncing the configuration database I ran the configuration compliance job once more, however with the same (misleading) results. Cross-checking the configuration reveals that none of the devices marked as compliant are actually having the "ip helper-address" configured.
Maybe it is something wrong with the input data I specified for the compliance template (ref step 1-6 in my first post)?
Or maybe the Compliance Jobs arent the best ways to determine whether or not my devices are having the "ip helper-address" configuration defined?

How to identify Which ports are using in RAC setup?

Hi,
how to identify Which ports are using in RAC setup?
Thnaks,

[Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?

Hi there,
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Thanks.

You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Here is one more resource :
https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
real time and provides the captured data at granular level.

Which TABLEs are used in RWB ADAPTER ENGINE ?

Hello everyone,
Runtime Work Bench -> message monitoring
we can hier select message from
Messages of component: Integration Server from Database
Which TABLEs are used to query?
Thx in advance
Best Regards
Yaning

hello Seshagiri,
do you know? in RWB--> Message Monitoring after selection i can get many columns.
for example:
End-to-End-Informationen
Engine
Status          -
> as System Error or successful
Start
Ende
Sender-Partner
Sender-Service
Sender-Interface
Empfänger-Partner
Empfänger-Service
Empfänger-Interface
which table contains this Info. column Status ?
Thank you
regards
yaning

How to find which datasource are using tables AFRU ,CAUFV and AUFM

*how to find which datasource are using tables AFRU ,CAUFV and AUFM*

Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman

Which ports are used by LMS 4.2.5 Software Center

Hi everybody!
we are trying to download device updates and packages via the software center of lms 4.2.5. but get the attached error msg.
Which ports are used for the download (for firewall configuration)
I can't find the used ports for this function in the install guide.....
I am very thankful for any suggestions!
Edit:
here is the log output:
[ Sun Jan 04 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Sun Jan 04 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Mon Jan 05 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Mon Jan 05 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
there is no proxy in use, so the is none configured :)

Hi,
Looks like you are encountering this BUG
CSCur85172    Unable to installing the device packages from cisco.com using LMS Server
Try this to resolve the issue::
Stop Daemon Manager
2.            Change the protocol 'http' to 'https' for the below URL's in vds.properties
file located under /NMSROOT/lib/classpath/com/cisco/nm/xms/vds/.
NGCcoScript=http://tools.cisco.com/software/catalog/swcs/softwaremetadata
NGCcoImageScript=http://tools.cisco.com/software/catalog/swcs/image
TO
NGCcoScript=https://tools.cisco.com/software/catalog/swcs/softwaremetadata
NGCcoImageScript=https://tools.cisco.com/software/catalog/swcs/image
3.            Start the Daemon Manager.
Thanks-
Afroz
****Ratings Encourages Contributors ****

Which tables are used for Quality Efficiency calculation of OEE report ?

Hello,
We're confirming OEE report behavior.
I'd like to know OEE report and ME table specification.
Which tables are used for Quality Efficiency calculation of OEE report ?
According to I know, the definition of Quality Efficiency is (complete qty) / (start qty).
For this calculation, does OEE report just use qty_started and qty_completed of PRODUCTION_LOG table?
If any other tables/columns/logic are implemented, your information is appreciated.
Best Regards,
Takahiro Uesugi

hi
Go to BSIS & BSAS
BKPF
SKA1
SKAT
SKB1
Regards
Roobal

Which ports are used by oracle datbase and management agent other than 1521

Hi,
Which ports are used by oracle datbase and management agent other than 1521 and the default port of management agent?
Regards,
Rjiv.

Check Port Numbers and Protocols of Oracle Components and also check your portlist.ini in $ORACLE_HOME/install directory.

Which tables are used...

Hello
I have a script, which makes a lot of things on the database. Is there a tool or a script, that I can see which tables are used by the script?
Thanks for the help.
roger

Street wrote:
Thanks for the answers. We know, what the scripts do. But we need a list from all tables, that we can export this tables, its for a migration!Yes, but we don't ... and the response depends on what kind of script it is, and what it does.
For example, if the "script" is a sequence of pure DML commands which would be run from sqlplus then I would let the PL/SQL compiler do the work by creating a procedure containing the script text, compile it, query user_dependencies and then drop the procedue.
If it contains DDL then that might work as well (not near a computer with Oracle on it so I can't check whether a procedure containing a create table statement would show that as a dependency or not ... )
The script could already be a procedure / package, in whcih case just query user dependencies, or it could be a shell script which invokes all manner of strange things, in which case you're probably on your own.
Maybe I'm being naive, but couldn't you just run the thing in an empty schema (or even a fresh instance - a local XE for example), and then look at what's appeared?
Dave
Edited by: Dave Rabone on 10/01/2012 03:16
finger trouble ...

How do I find out which instruments are used by software instrument loops?

This isn't so much a problem, it's just something that's been bugging me - how do I find out which instruments are used by the software instrument loops?
Usually clicking on a track will bring up the instrument name in the track info pane, but if I do this after importing a software instrument loop into my song it doesn't show anything. Any ideas?
PS I have used the search function so I apologise in advance if there's an obvious answer.

in track info, under details, the instrument being used is displayed in the generator popUp menu

How can I find which applications are using the most power?

I have recently noticed a full charge of power doesn't last as long as it used to on my iPad 2. Is there some way to determine which applications are using the most power?
I have been monitoring my home network router accesses and have noticed the iPad logs accesses every 15 seconds. This only happened recently. It had been well behaved and only accessing once or twice a day before. I installed the most recent iTunes upgrade, per suggestions during a Sync. The problems seemed to occur after this update. I have gone through all the settings and have minimized the applications requiring higher power (I switch off the location services unless I'm away from home. Likewise, I turn off my cellular carrier unless I'm away from home, etc.)
In short, how can I maximize my power usage (aside from turning it off)?
Thanks.
Dave

Thanks for responding so quickly.
I'm really trying to find out why the battery is depleting much faster than it used to all of a sudden. I used to be able to put a full charge on it and it would last about 5 to 6 days with normal use (normal for me). Now that battery only lasts about 2 to 3 days with the same use.
I DO recharge it when it needs to be charged but this is indicating there is something else (new) that is causing the power drain.

Google Contacts API 2.0: Add option to select which groups are synced

This has been a requested issue for quite some time now:
*1) Add an option to control what Google Contact groups are synced in ITunes*
Currently, if you sync to Google Contacts, iTunes will pull in EVERY contact from your Google Contact list. That includes those contacts filed under "Suggested Contacts", which lists contacts you email on a frequent basis. The workaround for this is to delete your Suggested contacts every time you sync your iPhone, or risk the issue of having hundreds of new junk contacts in your iPhone.
I understand that there was an issue in the Google API before, the issue being that there was no way to distinguish between which group the contacts were coming from. That issue is now gone, it was corrected in the update of the Google API to 2.0 on December 12th. Now, when syncing, the ability to distinguish which groups the contacts exist in is there. Below is the documentation of those changes:
http://code.google.com/apis/contacts/docs/2.0/developers_guide.html
With Google's update, the iTunes implementation of syncing Google Contacts can allow the selection of only specific groups to sync.
As said before, this is basic functionality that has been requested by many for a long time (search Google if you don't believe me), and I hope and pray that the wonderful iTunes/iPhone gods will bestow upon us the ability to select Google Contact groups in the near future. Are there any plans to add this functionality? If so, when might we expect an update?

Hello Blindbug.
I do apologize. But this is a user to user community. And no one here knows when or if certain features or products will be released unless there has already been a public announcement by that company released for everyone to view and read.
If I can be so kind as to refer you to iPhone feedback below. And you may wish to also spend some time going to google's site and submitting feedback as well.
http://www.apple.com/feedback/iphone.html

Which Groups are used?

Similar Messages

Maybe you are looking for