Which HDD of 500GB and 700 GB are compatible with the MacBook Pro

MacBook Pro from my daughter's diagnosis was found to be defective HDD Toshiba 500GB.
When upgrading OS X Mavericks pictures on a MacBook Pro froze. Diagnostics in Apple dealer in Croatia - Zagreb is found to be defective HDD.
Interested me, Does any SATA III, HDD 2.5 ", 5400 RPM, 9.5 or 7 mm or larger capacity (750GB, 7200 RPM) can be installed in a Mac Book Pro. MacBook Pro is manufactured 2009 years and was acquired 2011 years.
Can you write that are compatible HDD (500GB model and 750GB model) with the MacBook Pro.
A lot of thank you for your reply !!
Sorry for my bad english !!

Re: Which HDD of 500GB and 700 GB are compatible with the MacBook Pro
May 13, 2014 6:21 PM (in response to mrgud28)
Today I called a few stores and Apple Authorized Service Provider in my country, Croatia.All they told me, whether from ignorance or do not know why ... Do I have to buy onlyoriginal HDD to Apple because we second HDD my MacBook Pro will not recognize. I do not know what to do. HDD 2.5", 750GB, 5400 RPM or 7200 RPM, 8 or 16 MB of Cash in the IT shop costs around 60 USD, while the Apple service costs 150 USD. Now what to do, buy a SATA III drive 2.5" in the IT shop or twice as expensive as the Apple service.Please help me !!
Has anyone tried to put the MacBook Pro HDD drive that is not branded with the Apple label. And if there were any problems with the disc recognition by the MacBookPro.
Thank you all for your help.

Similar Messages

Are SACDs fully compatible with the MacBook Pro?

I'm a huge Tolkien appreciator, and I absolutely love Howard Shore's incredible scores for Peter Jackson's film adaptions of The Lord of the Rings. The Complete Recordings of each film come with a double-sided SACD of the score, which does play in the DVD Player application on my MacBook Pro (late 2011), but I'm not sure if it's actually getting the full sound quality from the SACD. Does anyone know if the MacBook Pro's system takes full advantage of the multiple channels on the SACD?
Thanks!

Re: Which HDD of 500GB and 700 GB are compatible with the MacBook Pro
May 13, 2014 6:21 PM (in response to mrgud28)
Today I called a few stores and Apple Authorized Service Provider in my country, Croatia.All they told me, whether from ignorance or do not know why ... Do I have to buy onlyoriginal HDD to Apple because we second HDD my MacBook Pro will not recognize. I do not know what to do. HDD 2.5", 750GB, 5400 RPM or 7200 RPM, 8 or 16 MB of Cash in the IT shop costs around 60 USD, while the Apple service costs 150 USD. Now what to do, buy a SATA III drive 2.5" in the IT shop or twice as expensive as the Apple service.Please help me !!
Has anyone tried to put the MacBook Pro HDD drive that is not branded with the Apple label. And if there were any problems with the disc recognition by the MacBookPro.
Thank you all for your help.

TS4036 My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?

My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?

Welcome to the Apple Community.
Yes, update first, Settings > General > Software Update.
Then navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

Which video crd's are compatible with the H8-1414

Does anyone know Which video crd's are compatible with the H8-1414

Hi,
The H8-1414 has the AMD 7450 video card which is a good video card for an UEFI enabled PC with a 300 watt power supply.
A higher performing video card that will run in UEFI mode would require a bigger power supply and then there would be numerous cards depending on your application requirements.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Do I go with the MacBook pro or the MacBook air? I'm going into 8th grade and were required to have labtop. I Also edit videos for my YouTube chanel. Which should I get 13 inch model.

Do I go with the MacBook pro or the MacBook air? I'm going into 8th grade and were required to have labtop. I Also edit videos for my YouTube chanel. Which should I get 13 inch model.

MacBook Air: thin, light, fast SSD storage. Cons: not upgradable, expensive.
MacBook Pro: cheaper, upgradable, better graphics card, more storage and RAM for the buck. Cons: not as light
you'll get more for the money with the MacBook Pro. the Air is better as a second computer for people.

Im trying to set up my new 5s from a icloud backup on my 4s. when i my 4s backup is gray and i get msg: "No iCloud backups are compatible with the version of iOS (7.0.6) on this phone. 4s iOS is 7.1 with no update available

Trying to set up new 5s from icloud backup on 4s. when i select "restore from backup" the current backup on my 4s (today) is gray and cannot be selected. the msg on the bottom: "No icloud backups are compatible with the version of ios (7.0.6) on this phone. 4s ios is 7.1 with no updates available. help?

You will have to first update your new iPhone 5s to iOS 7.1 before you can use your iPhone 4s backup.
Set it up as new, do the update (Settings > General > Software Update) and then re-enter setup by erasing the phone (settings > General > Reset > Erase all Content and Settings).

I want to buy surveillance cameras and software that are compatible with Mtn Lion, what do you suggest?

I want to buy surveillance cameras and software that are compatible with Mtn Lion, what do you suggest?

You do have the ability to create good user interfaces with LabVIEW.
The main problem is what do you, or your customer consider a good user
interface.
The first thing I would suggest is to start using the "Dialog Control"
controls for your front panel. This set of controls pick up their style
from the operating system, so they will match the rest of the system
applicaitons.
Another thing is limit the use of color on the front panel. One persons
idea of a nice shade of blue can be another person eyesore. Instead,
use the decorations for grouping of controls.
I would stay away from ActiveX. It's interface is quirky at best and there is a lot of overhead involved.
Just to show it's possible, the attached images are screen shots of
user interfaces I've designed with LabVIEW. The first two use the
Dialog Controls, and the third uses standard controls and color at the
customers request.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
DMI_Tester.gif ‏73 KB
DIIDatalogger.gif ‏102 KB
Trackerr.gif ‏115 KB

I am switching from an iphone 4s to a 5s. When I try to restore from icloud and then choose a backup, it tells me "No iCloud backups are compatible with the version of iOS on this iphone." How can get into my new phone to update?

I am switching from an iphone 4s to a 5s. When I try to restore from icloud and then choose a backup, it tells me "No iCloud backups are compatible with the version of iOS on this iphone." How can get into my new phone to update?

UUpdate the new iphone to iOS 8.3 before you try to restore the backup.

HT204368 which blue tooth headphones are compatible with the ipod touch?

Which blue tooth headphones are compatible with the IPod Touch(not the phone)

All which support the Bluetooth profiles
http://support.apple.com/kb/HT3647

I have the original iPad and when I sync it with my macbook pro in iPhoto the faces are different on both, how can I get them to be the same as on the computer

I have the original iPad and when I sync it with my macbook pro in iPhoto the faces key photo aren't the same on both devices, how can I get them to be the same as on the computer

Interesting observation. Thanks for sharing.
Did you have a technical support question?

Content Tab: None of the fact tables are compatible with the query request

Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
Dev

Hi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev

Fact tables are compatible with the query request

Hi,
i am using 11g.In 10g working fine without any error.After migrate 10g into 11g below error will returning. What is the problem and How we will fix.Could you pls let me know.Thanks
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request FACT_AGENT_TIME_STATISTICS.FKEY. (HY000)
SQL Issued: SELECT s_0, s_1, s_2, s_3, s_4, s_5, s_6, s_7, s_8, s_9, s_10 FROM ( SELECT 0 s_0, "Team Performance"."DIMENSION - LOCATION"."COUNTRY CODE" s_1, "Team Performance"."DIMENSION - TIME"."BUSINESS DATE" s_2, CASE WHEN "Team Performance"."DIMENSION - TEAM"."ROLE" ='TEAM LEADER' THEN 'Team Leader' ELSE "Team Performance"."DIMENSION - TEAM"."TEAM" END s_3, CASE WHEN '30 Mins Interval' ='15 Mins Interval' THEN "Team Performance"."DIMENSION - TIME"."15 Mins Interval" ELSE "Team Performance"."DIMENSION - TIME"."30 Mins Interval" END s_4, ((SUM("Team Performance"."FACT - AGENT CALL STATISTICS"."TIME - ACD CALL HANDLING"+"Team Performance"."FACT - AGENT CALL STATISTICS"."TIME - AFTER CALL WORK (ACW)")+SUM("Team Performance"."FACT - AGENT TIME STATISTICS"."AVAILABLE TIME"))/60)/(COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE") s_5, (SUM("Team Performance"."FACT - AGENT TIME STATISTICS"."AUX3 - TRAINING"+"Team Performance"."FACT - AGENT TIME STATISTICS"."AUX4 - MEETING"+"Team Performance"."FACT - AGENT TIME STATISTICS"."AUX5 - PROJECT"+"Team Performance"."FACT - AGENT TIME STATISTICS"."AUX6 - COACHING")/60)/(COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE") s_6, (SUM("Team Performance"."FACT - AGENT TIME STATISTICS"."STAFFED TIME")/60)/(COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE") s_7, COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE" s_8, MIN("Team Performance"."DIMENSION - TIME"."FULL DATE TIME") s_9, REPORT_AGGREGATE(((SUM("Team Performance"."FACT - AGENT CALL STATISTICS"."TIME - ACD CALL HANDLING"+"Team Performance"."FACT - AGENT CALL STATISTICS"."TIME - AFTER CALL WORK (ACW)")+SUM("Team Performance"."FACT - AGENT TIME STATISTICS"."AVAILABLE TIME"))/60)/(COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE") BY CASE WHEN '30 Mins Interval' ='15 Mins Interval' THEN "Team Performance"."DIMENSION - TIME"."15 Mins Interval" ELSE "Team Performance"."DIMENSION - TIME"."30 Mins Interval" END, CASE WHEN "Team Performance"."DIMENSION - TEAM"."ROLE" ='TEAM LEADER' THEN 'Team Leader' ELSE "Team Performance"."DIMENSION - TEAM"."TEAM" END) s_10 FROM "Team Performance" WHERE (("DIMENSION - TIME"."BUSINESS DATE" BETWEEN timestamp '2012-11-23 00:00:00' AND timestamp '2012-11-23 00:00:00') AND ("DIMENSION - LOCATION"."COUNTRY CODE" = 'US') AND ("DIMENSION - LOCATION".DEPARTMENT = 'CSG')) ) djm FETCH FIRST 65001 ROWS ONLY

Back up your repository before following these steps:
1 Reduce the problem report to minimum number of columns required to generate the error. This will usually identify which dimension and which fact are incompatible.
2 Open the repository in the Administration tool and verify that the dimension and fact table join at the physical layer of the repository
3 Verify that there is a complex join between the dimension and the fact in the business layer.
4 Check the logical table sources for the fact table. At least one of them must have the Content tab set to a level in the hierarchy that represents the problem dimension. This is usually the detailed level.
5 Check the logical table source Content tab for the dimension table. Unless there is a valid reason, this should be set to blank.
6. Save any changes to the repository.

None of the fact sources for [column] are compatible with the detail filter

Hi Experts,
I am using obiee 11.1.1.7.
Getting below error when i add a filter of non conformed dimension column.
Below is the error
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14023] None of the fact sources for [column] are compatible with the detail filter
Please help in solving an issue.
Regards,
NN

Hi NN
You need to follow steps in below link to model your BMM layer for the report to work with non confirmed dimensions.
http://obibb.wordpress.com/2010/05/31/multiple-fact-reporting-on-non-conforming-dimensions/
Once you have followed these steps you can use the non confirmed dimension in the reports.When you see the logs to see the query generated by obiee,it generated 2 queries 1 with confirmed dimension and other with non conformed dimension.When you filter using non confirmed dimension you will now not notice any error but the results will not be filtering out because the filter will be applied only in 1 query which is valid
Now for this to work what you can do is ,instead of using the filter drag the column you like to filter as a prompt in your view.default it to the value you need using the case statement and hide it.This is one of the work around.
There may be many other work arounds for this but you need to understand that for you requirment to work you need to tweek OBIEE to generate 1 query instead of 2 queries.

"None of the fact tables are compatible with the query request " error

I've got a situation where I have two facts(Fact_1, Fact_2) and three dimensions(dim_1,dim_2,dim_3) in 1 subject area. I've got dimension hierarchies setup for all the dimension tables.
Dim_1 is one to many to Fact_1
Dim_2 is one to many to Fact_2
Dim_3 is one to many to both Fact_1 and Fact_2
I've set up the content levels for the LTS for the Facts so that they are the lowest grain for dimensions they join to and the grand total grain for dimensions they do not join to.
My rpd is consistent. When I run a report using an attribute from Dim_3 and Dim_1 or Dim_3 and Dim_2, the report comes back fine.
But if I try to run a report using all three Dim tables, I get an error and the message "None of the fact tables are compatible with the query request ".
First of all, is it possible to make a report using all three dimensions?
Second, what's the best way to trouble shoot this error? Why are none of the fact tables compatible? I thought as long as the aggregation levels were set to grand total for non-shared dimensions, Answers would be able to create the report properly.
Any advise would be greatly appreciated.
Thanks!
-Joe

OBIEE is looking for a fact that can link ALL the dimensions together. This is also known as the implicit fact ... you don't have a fact that can relate all the dimensions - you have 2 facts that together they can. Perhaps you need to great a single logical fact that has both LTS for your physical facts and try it that way.
Then you'd have Dim1, Dim 2, Dim3 all being able to join to Fact1 (which is made of physical facts 1 & 2).

What monitors are compatible with the Mac mini?

What monitors are compatible with the Mac mini?

Is this the new Mini?
Most any Thunderbolt, HDMI, DVI, or VGA monitor will work with the new Mini, though many problems exist with the HDMI port it seems.
Video Card:
HD Graphics 4000
VRAM Type:
Integrated
Details:
This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system.
Standard VRAM:
512 MB*
Maximum VRAM:
512 MB*
Display Support:
Dual Displays
Resolution Support:
1920x1200*
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html

Which HDD of 500GB and 700 GB are compatible with the MacBook Pro

Similar Messages

Maybe you are looking for