Which HDD? (out of the 500GB, 5400rpm crop)

I've decided to go with the larger 500GB for my macbook and have ruled out the faster, yet smaller 7200 drives.
Now I just have to pick one, can anyone make a suggestion? I'm looking at the following drives...
*SAMSUNG Spinpoint M6 HM500LI 500GB 5400 RPM 8MB Cache 2.5" SATA 3.0Gb/s Notebook Hard Drive - OEM* for $85
*Seagate Momentus 5400.6 ST9500325AS 500GB 5400 RPM 2.5" SATA 3.0Gb/s Notebook Hard Drive - OEM* for $90
*Western Digital Scorpio Blue WD5000BEVT 500GB 5400 RPM 2.5" SATA 3.0Gb/s Notebook Hard Drive - OEM* for $99 (but includes 3 year warranty)
I'm leaning towards the WD Scorpio "Blue" because it has the 3 year warranty and is only a few bucks more than the others. Anything else I should be considering?

It's also total nonsense. A 500 GB drive is no more likely to have problems than a 100 GB drive. 500 GB drives will work just fine and are available in 5400 and 7200 RPM flavors - the latter are faster than the former.

Similar Messages

  • Hello guys.i have  an iphone5 16gb which shuts  out of  the  blue  randomly.not too often.any ideas ?os 7.0.3

    hello guys.i have  an iphone5 16gb which shuts  out of  the  blue  randomly.not too often.any ideas ?

    Follow the directions here, to restore the iOS software. If the issue continues after doing so, make an appointment at any Apple store:
    http://support.apple.com/kb/ht1414

  • Which HDD interface for which drives?

    Hello,
    I have read Harm's and others' excellent advice on drive configuration, but am not sure about which drives to put on which interfaces.  Assuming an X99 motherboard has 2 M.2 PCIE sockets, 1 SATA Express port, 1 SATA Express controller with 1 port, 8 SATA 6 GBs, and possibly a PCT RAID card.  Which of these connectors would you use for which drive, and why?  (I suppose another way to ask this might be which hdd uses benefit the most from increased speed--OS, application, pagefile, media, etc?)
    Also, closely related, one thing I cannot discern from what I have read so far is where lies the point of diminishing returns. For a system used for a mix of Premiere/Photoshop/AE, using as HaswellE, 32Gb, and say a 980, how many drives and how much drive throughput is required to prevent HDD from being a significant bottleneck?
    Thanks for any thoughts!!

    Normally PCI-E slots are a premium for editing systems and config options so I don't recommend wasting those on NVMe drives or adapter cards. I would suggest the Sata ports for storage usage and a SSD OS drive for sure. A SSD cache drive is a good idea as well provided it's big enough. Normally you want a 256GB Cache drive if so.
    Eric
    ADK

  • Which HDD of 500GB and 700 GB are compatible with the MacBook Pro

    MacBook Pro from my daughter's diagnosis was found to be defective HDD Toshiba 500GB.
    When upgrading OS X Mavericks pictures on a MacBook Pro froze. Diagnostics in Apple dealer in Croatia - Zagreb is found to be defective HDD.
    Interested me, Does any SATA III, HDD 2.5 ", 5400 RPM, 9.5 or 7 mm or larger capacity (750GB, 7200 RPM) can be installed in a Mac Book Pro. MacBook Pro is manufactured 2009 years and was acquired 2011 years.
    Can you write that are compatible HDD (500GB model and 750GB model) with the MacBook Pro.
    A lot of thank you for your reply !!
    Sorry for my bad english !!

    Re: Which HDD of 500GB and 700 GB are compatible with the MacBook Pro 
    May 13, 2014 6:21 PM (in response to mrgud28)
    Today I called a few stores and Apple Authorized Service Provider in my country, Croatia.All they told me, whether from ignorance or do not know why ... Do I have to buy onlyoriginal HDD to Apple because we second HDD my MacBook Pro will not recognize. I do not know what to do. HDD 2.5", 750GB, 5400 RPM or 7200 RPM, 8 or 16 MB of Cash in the IT shop costs around 60 USD, while the Apple service costs 150 USD. Now what to do, buy a SATA III drive 2.5" in the IT shop or twice as expensive as the Apple service.Please help me !!
           Has anyone tried to put the MacBook Pro HDD drive that is not branded with the Apple label. And if there were any problems with the disc recognition by the MacBookPro.
    Thank you all for your help.

  • I have a 750GB HDD. Speaking visually (looking at Disk Utility) I had a 250GB Mac Journaled partition on the top, and a 500GB Mac Journaled partition on the bottom. The 250GB partition is now free space, now how do I expand the 500GB partition upwards?

    I have a 750GB HDD. Speaking visually (looking at Disk Utility) I had a 250GB Mac Journaled partition on the top, and a 500GB Mac Journaled partition on the bottom.
    The 250GB partition has been deleted and is now free space.
    Now how do I expand the 500GB partition "upwards" when the GUI only gives me a resizing handle on the bottom right corner in Disk Utility?
    I am comfortable with Terminal if there is a non-destructive CLI way to do this, since the Disk Utility GUI seems to have failed here...

    OK.
    You will need to check out a third-party utility.  The diskutil CLI utility cannot non-destructively change the start of a partition map, only the end (which is why you only get the draggable handle in the GUI at the bottom of each partition...same idea).
    To be honest, I'm not even sure how well third-party tools will do at this either.  Changing the start of a partition is non-trivial, be cause of the partition map files, b-trees and so on which have to be moved.  iPartition is well regarded, but also not free.
    And regardless of what tool you use, you will want a backup of your data (assuming that it's data you want to keep, or you wouldn't care about non-destructive repartitioning).  Which might mean that just getting a new HDD , copying the data and then repartitioning the current one and having an extra HDD because of it may be the simplest and safest solution anyway...

  • I want to upgrade the 500gb HDD to an SSD on an S230u with windows 8 but want clone the drive

    I want to upgrade the 500gb HDD to an SSD on an Thinkpad Twist S230u with windows 8 but don't want to lose the data and programs installed on the drive and have to start over. I tried to clone it but no software could do it. I tried acronis and EasyToDo. I was able to clone it with a duplicator but it wasn't bootable. Am I to assume that what I need to do is the following - 1- Create the recovery media on a 32gb usb stick. 2- back up the drive using Acronis (or other) 3- Physically replace the drive 4- boot to the USB Recovery Media and bring the system back to it's original state out of the box but with the SSD Drive. 5- Use Acronis (or other) to restore back up made of the 500gb prior to removal. Thanks in advance! Scott Fischer

    Before you start cloning your HDD with acronis, you have to prepare the SSD:
    at first: connect your SSD with USB to your notebook and
     1. Start CMD.EXE as Admin
     2. type: "diskpart"
     3. type: "select disk x " x = Letter of your SSD
     4.  type: "list partition" the drive should be unformatted
     5.  type: "create partition primary align=1024"
     6. type: "active"
     7. type: "format fs=ntfs" --> wait some minutes
     8. type: "assign letter=x" --> For example "x"
     9. type: "exit"
    Start acronis true image 2013 (trial version)
    select "Backup" without empty sectors
    you can select any partitions, so also the the invisible lenovo backup paritions
    The Backup can be "Restore"-d to the SSD, incl.  GPT (MBR like in UEFI Systems)
    After all, the SSD is ready to use. Booting on USB gives here a blue screen. I tought it was my fault. It isnt. You can build in the SSD into your SATA Port and Windows 8 will boot very well.
    Sorry for my bad english

  • Choosing which HDD as the master boot

    I got a Product name: HP ENVY TS 15 Notebook PC and recently I've replace the stock HDD to a 1TB SSD HDD which was working fine with the HP provided recovery solution.
    Then I bought another msata 500GB SSD HDD thinking to use it as a secondary HDD (Say D drive). However it seem to be causing the windows OS to fail and I keep going back to a loop saying there's error with Windows. I suspect is due to msata as a master boot HDD instead of the 1TB SSD.
    The rom setting only comes with a "Notebook harddisk" option in the boot sequence option. Is there a way to explicting indicating which HDD to boot at? Primarily I like to keep the 1TB as main WIndows to boot then Msata

    <<Then once you retire the XP. You will need to choose one of the other machines as the main one. >>
    How do I choose the main one? I have read many of the docs and never found a hint about this.
    Setting up Sync has been very difficult. The system messages are unclear...it's not even possible to know if a machine is set up unless you know the "secret" about seeing "Set Up Sync" on the menu. Might be logical to the developer but not to this end-user.
    Last night I was running back and forth for hours trying to set it up on my PC's. My notes include six sets of 12-character codes and one of those long password strings. When the link-up fails, there's no error message.
    Last night I renamed the whole feature "Firefox Stync" I was so frustrated. Who designed this anyway? Pardon the rant but it obviously was not tested by end-users, judging from the huge volume of questions it generates.

  • Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up

    Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up with it for months, until june 7 when I decided it has been long enough, and I got a replacement. I told the genius bar what happened, and I already did the so called "steps" that apple reccommended on the site, which was reset network settings, restore iPhone. The genius bar gave me a replacement phone, so I was expecting that the problem would be over, but it isn't. It seems that it's iOS 6.1.3 which is the case of most public complaints on apple iPhone products. Not even 3 weeks after I got the phone replaced, it is doing it again, so I suspect I'm just going to get a replacement again? Unfortunately I only have until 5th of july 2013 until my 1 year warranty is up. After that, any issue I have, I have to purchase apple care. People are expecting this problem to be fixed but I don't see it being solved any time soon. This is horrible and really low, because I have been a good customer, when I talk to the people at the genius bar, I show the utmost respect I can to them for the work they put into their job, but somewhere there is a problem where something has gone wrong. Because of that, people that only have a one year warranty (which i received because I purchased my apple iPhone at an Optus outlet, once that one year warranty is up, I have to pay for a problem that isn't even my fault? That isn't how it should work, you should be fixing this problem so people can be happy customers and leave happy. Obviously you don't all know how to do your jobs, because if you did, we wouldn't have this problem. I would like a replacement phone, ONCE AGAIN. If this problem occurs again, I will simply stop buying your products, and lose faith in your company, your's sincerely, Jack Maher.

    This is a user to user help forum only. You are not addressing Apple here.
    My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.

  • I used to share one apple ID/account with my ex but made a new one for myself recently and logged out of the old one but when I try to update my iBooks it asks for the old account's password(which my ex changed by now)

    I used to share one apple ID/account with my ex but made a new one for myself recently and logged out of the old one but when I try to update my iBooks (only happens with this app)it asks for the other account's password(which my ex changed by now). I don't understand why this happens when I'm logged into my account and it only happens with that app. Please help, I need to update. :/

    Content (apps, music, ibooks, films etc) is tied to the account that originally downloaded it, so if the iBooks app was downloaded using the account that you used to share with your ex then only that account can download updates to it. As it's a free app you could delete it and re-download it under your own account - and then re-download your ibooks into it (or copy the books to your computer's iTunes first via File > Transfer Purchases and then sync them back to the app).

  • How do I get a PDF document put into an attachment form that I can drag to an e-mail.  Usually I get an icon showing an spiral note book which then becomes an attachment when I drag it to the e-mail, but occasionally it stays in PDF and prints out on the

    How do I get a PDF document put into an attachment form that I can drag to an e-mail.  Usually I get an icon showing an spiral note book which then becomes an attachment when I drag it to the e-mail, but occasionally it stays in PDF and prints out on the e-mail.  What have I done differently?

    Thanks again for the detailed instructions Srini!
    And I really hate to be a pest . . . but . . .
    Using your example and not modifying it, I get the e-mail form filled out correctly and the pdf attached, however, I'm not prompted to sign it.
    Any more clues?

  • Which hdds are compatible with hp pavilion dv6700t cto entertainment notebook pc (out of warranty)

    I recently purchased a Seagate momentus as replacement http://www.newegg.com/Product/Product.aspx?Item=N82E16822148591 thinking it would be compatible but when i tried to replace
    the connections(interface) was not compatible with the laptop. Is there an adapter to resolve this problem?
    if not which hdds are compatible?
    Thank you in advance!

    Hi,
    If you have the original HDD, check that there is not a black plastic adapter that you can pull off the old drive and fit to the new one.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Looking for an app for a blue tooth, type I want to use on my Iphone is a "jawbone" Question is out of the many available in the store which one would be the best and most reliable?

    Looking for an app for blue tooth on my Iphone.  Out of the many in the app store which one(s) would be the best & most reliable?  Currently trying to set up for an older Jaw Bone?

    You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
    You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
    As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
    An Extreme's Guest network is separate from its Main network; that is the reason for having it.

  • How to find out which objects are at the end of the datafiles

    My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
    For that how to find out which objects are at the end of the datafiles.

    >
    My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
    For that how to find out which objects are at the end of the datafiles.
    >
    You may want to copy this and add it to your toolkit
    See 'What's at the End of the File?' in this Tom Kyte article from the Sept 2004 Oracle Magazine
    http://www.oracle.com/technetwork/issue-archive/o54asktom-086284.html
    And this AskTom blog shows you how to generate a script containing ALTER statements toresize your datafiles to the smallest possible. You can 'pick and choose' from the ALTER statements to do what you want.
    Then of course, you can use techniques from this article by Oracle ACE, and noted author, Jonathan Lewis
    http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/

  • How to find out which data control do the page layout components come from?

    hi,
    work in Jdev 11.1.2.3
    After have drag and drop data control into pages designer, how to find out which data control do the page layout component (such as a field in form layout) come from?
    --i cannot find data control related information in the property pallete for the page layout component.
    Regards.

    This information can be found in the page definition file.
    Select the field in the page and then click the binding tab.

  • How to find out which cube/ods has the code

    hi,
    I want to find out which cube/ods has the start routine/update rules written in it.  Is there a table or Tcode to find out the code instead of opening each cube/ods to find out whether there is code in it or not.
    Thanks,
    Sam

    hi Sam,
    take a look
    /message/3483792#3483792 [original link is broken]
    try RSTRAN, field STARTROUTINE
    related tables
    RSAROUT
    RSAABAP
    RSAABAPINV
    RSAROUTT
    Technical name of start routine
    Re: How to get info about a GP* program?
    Re: Search for start, update rule, etc. that uses infoobject
    if couldnt find out, you can use ST05 'sql trace', open 2 session, one for create start routine, and one for ST05, activate with option 'sql trace', then create start routine and 'deactivate trace' and 'display trace', and check out the tables list
    hope this helps.

Maybe you are looking for

  • New hard drive won't sleep

    I just installed a new Western Digital Caviar 200gb ATA drive (on 100 bus) as my system drive (also have a Seagate Barracuda 250gb for video on the 100 bus and a Maxtor 60gb for music on the 66 bus) and now, when I put my computer to sleep, I still h

  • "Itunes cannot connect to the internet" message is doing my nut

    When I try and update 3GS, i get an error message claiming that Itunes cannot contact the Iphone software update server because there is no internet connection. Rubbish. I'm talking to you via internet arent I. Have tried altering LAN settings. Any h

  • Compiling code for LPC2378 Target using LV Embedded

    Hi I am using LabVIEW embedded for ARM 10 and using MCB2370 evaluation board. I did my evaluation successfully but now when I tried to compile the same code for an lpc2378 target (tier 2), I am getting "Error: Application is too large for target memo

  • Wrong face being shown in smart album

    This is using iphoto on mac Why does wrong face get selected in smart album.  My smart album is set to show faces that contain  "Griffiths"  but I don't want one person with same sir name to show.  I re name this persons face to  "Griffo" expecting h

  • On which port xwindows run in Oracle enterprise Linux

    Hi, What is the port number for xwindows on Oracle enterprise Linux (OEL)5.3. We need port# to connect to OEL Server through xwindows software tightvnc. Regards Sridhar Nalla