Which iMac config would play best with AP3

I was in an Apple Store and a rep told me that Aperture 3 would even run great on a MacBook Air. Hmmm... I realize the Air is speedy, but really?
I want to get a new iMac and want to purchase the machine that is configured best for things like AP3 and very occasional CS5 use. Do you think I need to buy the most expensive configuration with the 2GB graphics and i7? Obviously it would be the ideal, but like most, I'm on a budget. I don't want to end up regretting my purchase in a year either. Any thoughts from anyone?

Whats your current setup? Do you currently have Aperture on your iMac? How old is your iMac? Most likely any of the current crop of Mac Book Pros will out perform your older iMac.
So how best to target your money for best performance. Memory and disk can be upgraded by the user and are relatively easy procedures.  You'll get more bang for your buck if you upgrade these after you get your mac. Adding a SSD could give you a nice performance boost. While these to get be added after the fact its not as easy as the other two so I would consider having the SSD installed.
CPU and GPU of course can't be changed once you get you're system.
There's been some discussion of GPU performance and Aperture but nothing official. If you plane on doing any video work or gaming bumping the GPU would be a plus and may carry over to improvements  in Aperture.
CPU would be last on my list. All the current crop of CPU's will run rings around the last generation. And Aperture (at least from my observations) is not particularly CPU intensive. If you're not also doing a lot of number crunching I'd put my money elsewhere.
Just realized your talking  about a new iMac. You started out talking about Macbook Airs and I didn't read the read the rest of the post closelly enough
Well it all pretty much stands except the disk isn;t really user upgradeable in the iMacs.  A  1TB internal wild be the smallest I'd go. But truthfully any of the new iMacs (even the 21.5 in 'entry level model')  blows the socks off all the current iMacs.

Similar Messages

  • Which Sony HD Decks work best with iMAC running FCE4.

    To continue my inquiries on my HD project. I may be using some HD material that will be shot on DVCPRO HD OR Sony's HD format , which one I do not know right now. I am trying to prepare early so I am asking anyone out there HDCAM HDV XDCAM? Which one Sony HD or DVC PRO HD , works best with FCE4 for both loading and potentially mastering?

    Here is an interesting reference: http://www.macvideo.tv/dvd-authoring/features/index.cfm?articleId=112361

  • ISE 1.3 and wireless - which certification method would be best....

    Scenario:
    From the firewall perspective we have two ISE nodes on the internal network running as admin/monitoring  primary and a secondary and both as PSNs. WLC is also on the inside however it has an interface for guest/untrusted device access which is going straight through to the internet, the DG being an interface on the firewall that is considered less secure. 
    There are two SSIDs, one using MAB for CWA and another using dot1x for user auth against an internal AD:
    The CWA SSID is using that guest interface on the WLC which goes to the firewall and DHCP is being handed out by a server on that side of the network too, the DNS server being used is public one. The Authz profile has been configured to use a static IP instead of the hostname as the public DNS will not resolve it. A rule was configured on the firewall to allow access to the ISE server on port 8443 for the guest portal. 
    On the dot1xx SSID of things it's been configured to use PEAP and mschapv2 and requires an AD username and password to authenticate. 
    Query
    Considering the CWA SSID uses an IP address for the server and the dotx use the hostnames of the server what would be the best way to rsolve certificate trust issues and what would be best to put in the CN and SANs. one wildacard certs seems like the way to go but not sure if this is going to be the best method with the Guest CWA using an IP.
    interested in what your thoughts are on this...

    Thanks Mark, this is essentially what I ended up doing.  I setup a new SSID to onboard the devices which I force them to a sponsored guest type of portal.  I ask them for AD credentials and then use the native supplicant to configure an EAP-TLS connection to the proper SSID.
    I did find out, from Cisco TAC, there is a new way to identify what VLAN the user should be put on. This is done in the Auth Profile.  You can use the directive "Airespace-Wlan-ID"
    In the provisioning process, I profile the device and check if it's a corporate asset or BYOD then I check to see if it belongs to the proper AD group, it gets a specific provisioning profile which includes the proper SSID for the vlan they want to connect to.  I then created a wlan for each of the vlans and attached it to the right interface on the WLC.  I created appropriate ACLs on the WLC then I named those ACL's in the Authorization proile.
    When the user goes through the provisioning process, they will be put on the proper WLAN based on AD membership and the type of device.  Only EAP-TLS connections are allowed on the Corp/Demo and BYOD networks.
    If user1 belongs to the Demo and BYOD AD Groups, their laptop will provision on the Demo Network and their IPhone will provision on the BYOD.
    The only gotcha is that if the user wants to change from one network to another, they need to re-provision their device.

  • Which Mac Pro would be best for editing?

    I'm upgrading my editing system and I was wondering what type of computer would be best. Again, the system is used almost solely for editing film in regular def and high def. I'm wondering what processor speed would be best. Whether I should get a duel core or quad core and why? What are the bells and whistles that are not needed? Price is no obstacle, but I don't want to just buy the best if it isn't necessary.

    The amount of RAM is of more influence than the difference between the processor speeds of the Mac Pro models. RAM is not that expensive, so always put as much in as you can, when using software that uses lots of memory. You're even better of using a slower processor with plenty of RAM than using on that is a little faster, but has few RAM.
    Then there is the speed of the hard disk memory that will be your next bottleneck, specially when using video or other large files. All Mac Pro 2008 models have 4(!) drivebays you can shove more SATA hd's right in. Then use the disk utility to configure them (2, 3 even 4!) as a RAID set, that is 2, 3 or 4 times as fast! Use the same type and size hd's for a set. Read up on RAID before you decide to use it. I use a striped RAID of 3 hd's and a 4th for a Time Machine backup of the RAID. They all fit nicely in the Mac Pro and hd's are not that expensive either.
    BTW Both RAM and HD's are cheaper when you buy them outside the Apple store, I'm sorry to say.

  • Buying new iMac, which graphics card would be best?

    I'm getting ready to buy a new iMac. I already have a 2010 27-in with a Radeon HD 5670 512 MB graphics (card? was built in as I remember). I need an additional iMac for my studio space and am deciding between the 21.5-in. w/ Intel Iris Integrated graphics and the NVIDIA GEForce graphics models. I do photography and art related video projects with music (Final Cut, Photoshop CSS, Logic Pro).
    The 2010 iMac has worked fine for me. Which of the new iMacs would you recommend? Do I need extra dedicated graphics card or is the Intel Iris pretty comparable to what I've been getting with the Radeon?
    I wouldn't mind saving a couple of hundred dollars to use on other things like a back up drive, but if it's going to be a big difference I could spend the extra $ for the NVIDIA.
    I'm not a gamer BTW.
    thanks for your input, tech-heads!
    Christine

    Although the processor speed is slower, the i5 is much more efficient
    than the i3.  In addition, the memory bus speed is faster than your
    2010.  The result is you will have a faster computer.
    Just for some performance numbers, here are the Geekbench
    scores for your current computer and the one you are considering.
    (64 bit single core test score/64 bit multi core test score)
    2010, i3, 3.2 GHz iMac ---> 2086/4491
    late 2013, 21.5", i5, 2.7 GHz ---> 3172/10255

  • I want to devolope textures, both building and clothing for a online game I play, which adobe app would be best for me to download,, I have photoship cc just purchased it yesterday and I am exploring

    I want to build textures both for building structures, and clothing for a game I play online,, I have photoshop cc, no apps,, what would be the best app to purchase and use?

    Open itunes, authorize itunes to your account, connect iphone, click File>Transfer Purchases

  • Just bought a new Canon Vixia HF R300.  It looks like I have basically two recording modes--either AVCHD or MP4.  I have a year old Mac Mini on Lion with increased ram.  I edit on iMovie and upload to You Tube.  Which recording mode would be best?

    Hi...
    I just bought a Canon Vixia HF R300 camcorder.  It looks like it gives me a choice of two recording modes AVCHD or MP4.  I will be uploading onto a year old Mac Mini with the Lion Operating system and increased ram.   I will be editing in iMovie '11 then uploading to You Tube.  Which recording mode should I use?  Obviously I'd like to get the best quality but I also want it to show well on You Tube.   What do you think?  Thanks for the help.  Bill

    Hi
    What program can you use to convert AVCHD to a DVD format?
    Share to File (in iMovie) - AND AS 480p - NOT Higher as DownScaling will be done badly.
    Use this file in iDVD or Roxio Toast™ or what DVD Authoring program You've got.
    To make a VIDEO-DVD You must use a DVD Authoring program - to get the right compression format AND Structure - It is a MUST.
    There are free alternatives - but resulting DVD hasve been far from what quality iDVD (and Toast™) will deliver.
    To get best possibly DVD - also this counts.
    - DVD brand used - I only Verbatim
    - DVD type used - I only DVD-R Single layer (4.7Gb)
    (DVD+R works for many and DVD-R/W usually don't work OK and Double Layer also are a problem to it self)
    - BURN SPEED - I set this as low possibly (usually x2)
    - Free Space on Start-Up Hard Disk - MATTERS - I never go less than 25Gb
    Good Luck
    Yours Bengt W

  • Which of these 2 Laptops would be best with Premiere Pro?

    Need opinions between two laptops I'm eyeing as portable options for editing footage from my Canon HF S100.
    Really just want a portable 14" laptop that I can do relatively basic editing AVCHD footage on Premiere Pro relatively smoothly when I'm travelling and some encoding with adobe media encoder.  I don't care about battery life. I just want Premiere to play/edit AVCHD footage without the choppy video stuttering. I'm also hoping for some faster encoding times than my 4 year old current laptop. Both laptops are about the same price. The only major differences is a dual core i7 vs a quad core i7... 4gb of ram vs 6gb... 256mb video card vs. 512mb video card... and solid state hard drive vs. 7200rpm hard drive. Opinions?
    ThinkPad T410
    Intel Core i7-620M Processor (2.66GHz 3MBL3 1066MHz)            
    Genuine Windows 7 Professional 64            
    Genuine Windows 7 Professional 64 - English        
    14.1" WXGA+ LED        
    NVIDIA NVS 3100m Graphics 256MB DDR3        
    4 GB PC3-8500 DDR3 (2 DIMM)    
    128GB Solid State Drive        
    DVD Recordable, Ultrabay Slim    
    9cell, LI Battery TWSL
    Integrated WiFi wireless LAN adapters: Intel Centrino Ultimate-N 6300  
    Dell Studio 14
    Intel® Core™ i7-720QM Quad Core Processor 1.6GHz (2.8GHz Turbo Mode, 6MB Cache)
    Genuine Windows® 7 Home Premium, 64bit, English
    14.0” High Definition (720p) LED Display with TrueLife™ and Camera   
    6GB Shared Dual Channel DDR3 at 1333MHz   
    500GB SATA Hard Drive (7200RPM)   
    512MB ATI Mobility Radeon HD 4530   
    8X Slot Load CD/DVD Burner (Dual Layer DVD+/-R Drive)   
    84 WHr 9-cell Lithium Ion Primary Battery   
    Dell Wireless 1520 802.11n Half Mini-Card
    Soundblaster X-Fi Hi Def Audio - Software Enabled

    a 17" laptop with a "DESKTOP" i7 and 3 internal drives will perform EXACTLY the same as a desktop with an i7 with 3 internal drives
    (note i didnt mention raid 0 arrays)
    if you dont need firewire for ingest (who does these days)
    then you can use the Express slot and buy a Sonnet Array that connects vis the Express slot.
    making it every bit as fast as a desktop
    the only downside (and more to do with AE is the ram speeds are slightly slower)
    FYI this is the ONLY laptop i think is good enough for video. the newer i7 mobiles are rather slow
    Scott
    ADK

  • Which form would work best with a Filemaker database? PDF or HTML? and can we use a submit button to do this?

    We are looking at developing work forms for a project that will use a submit button to send the data from the form to a Filemaker database. My question is can this be done with a PDF or do we need to convert it to a HTML form?

    The architecture is not submit form - database, not exactly. It's submit form - web app - database. The crucial thing is the web app, perhaps one of CGI/PHP/ASP/others... FileMaker Pro seems a slightly unusual choice for a web back end, but there is a FileMaker Pro Server product. (Regular FileMaker is out of the question).
    So, you can have a web app which takes HTML format submits and updates a database. What about PDF?
    * PDF can submit the same format as HTML, so the same backend can work
    * PDF can submit other formats, FDF or XFDF. The web script could handle these.
    Frankly, if HTML is an option I'd go with HTML. There are many important compatibility issues with PDF forms, since so many browsers now do not use Adobe technology, and have their own. In these alternatives, form support goes from nonexistent to flaky, via badly broken.

  • Which version of ilife works best with Tiger 10.4.11 on G4Powerbook 1.33Ghz

    Hi,
    Just installed Tiger retail on my powerbook G4 and found out there is no native garageband/imovie so was wondering if there is a best ilife to look for that suits either the powerbook G4 1.33Ghz 1GB RAM and/or Tiger best or has known issues that can be recognized/dealt w before i buy?
    (panther's garageband was sticking and getting sluggish after only a few tracks or 2 tracks of digital beats, which is why i have installed Tiger).
    It's a combo 60GB harddrive with about 35/40GB spare
    as i have everything stored on my EXT HD.
    I could use the panther ilife -
    does anyone know if the newer ilife programs r better in speed and performance as well as gadgets or will they perform the same as the old v that i have because i'm still working on the G4?
    Any info would be helpful here,
    Thanks

    These are questions best asked on the ilife forums, perhaps specifically the [Garageband forum|http://discussions.apple.com/category.jspa?categoryID=127]. You'll probably get suggestions here, but you know that people on the GB forum are running GB, but can't be guaranteed that here (myself for example).

  • Which printer brands/models work best with a MacBook?

    I want to purchase an All-In-One printer/scanner/copier but not sure which one to buy.... any tips or advice? I know people have had problems in the past with certain brands and macs in general.
    I was thinking one with wi-fi would be quite useful if two laptops wanted to print to the same printer without being right next to it. Can you use internet wi-fi at the same time as using a wi-fi printer?
    Cheers
    Megs

    mfowler10:
    I purchased a refurbished HP all-in-one several years ago and it works like a charm. In addition, when I have had questions I found that, even though I have not had a warranty for years, HP gives excellent free expert email support, which is a value itself.
    I suspect that almost any of the major printer manufacturers would have a product that would work well for you. You should consider what is most important to you and go to a retailer like Staples and test drive the printer. e.g. if you want to print photos, be sure you get one that does the best job in that department. I have not checked, but you could check reviews and ratings in publications like MacWorld or Consumer Reports.
    cornelius

  • Which Creative Product would be best for

    So I need a mp3 player and portable photo storage unit with very specific features. I need it for my holiday (coz I don't want to take my mac in case I loose it). I really like my creative USB mp3 player and would like to get a creative product to meet my needs.
    My requirements are below. Could anyone help me by letting me know if there is a Creative product that will do ALL of these things?
    Thanks in advance!
    - Can store photos on it without having to go through a computer. Either through and XD and Compact Flash II reader or directly from the camera through a USB input (prefer the latter option)
    - Colour screen so that I can see the pics
    - mp3 player that supports VBS rips
    - at least 30gig storage
    - Ability to charge with the cigarette lighter in a car (or have rechargeable batteries that can be charged with an in-car charger)
    - Standard headphone jack
    Also, if there is a function so that I can back up my photo files on the fly straight into my external 40GIG hard dri've (without using a computer) this would be perfect.
    Thank you!

    Hi,
    I just read your post and maybe you might consider buying a Zen Vision W. This is a 4.3" Widescreen portable video player. It has the USB Host Feature which is you connect your digital camera and transfer photos on it without requiring a computer. It's available in 30GB and 60GB capacities. It plays music and videos, has a built-in FM radio, voice recorder and some more extras and it has Compact Flash Slot so you can store your pictures from your memory card. Go to this link for the full specs of this player...
    http://www.creative.com/products/product.asp?category=23&subcategory=24&product=575 2
    hope it helped you !
    ZenMaster2628

  • Which Mac Pro System works best with Premiere Pro CC?

    I am looking to upgrade my 12 core tower to the newer Mac Pro. I am wondering if anyone out there has suggestion as to what makes the most sense financially in terms of which  flavor of Mac Pro to get? For example, Is there a significant speed increase between the 8 core vs 12 core, and the D500 Vs the D700 Video Cards ? And how much RAM ? Normally the temptation is to go out and get the maxed out system, but reading though the forums with the various issues people are having with performance on the newer Mac Pro's and Premiere, would be great to know how it stacks up in the real world.
    Appreciate any input in this regard.
    Cheers
    Chris

    Gary Baker wrote:
    I thought the only graphic card options on the new Mac Pro are all AMD cards, is that not correct? You can use the Quadro?
    MtD
    Yes, thanks I forgot about that. I was just going by what I have, which is an older model so I can apparently just replace it with a newer Quadro.
    I'm no apple hardware expert and I'm not sure how the ports are setup. Apple's official support site only lists the AMD cards Chris mentioned for their most recent model, but that's also listed as late 2013 which doesn't seem right either. (or is it?) Note that they also list my mid-2010 model as only supporting ATI Radeon HD 577 and 5870 but I've been running a Quadro FX4800 in it with good results for several years, so I know that part's not right. So I'm not sure I'd take that site entirely literally, but of course you would not want to risk getting the wrong card. You should probably enlist the help of apple support (and/or forums) to get more details and assurance before purchasing, but bottom line is you'll want something with plenty of RAM (~ 4 GB or higher if possible) which will also be compatible with CUDA and or OPenCL playback in prpro.

  • Which version of winodws works best with MBA? ahich software I should use?

    I used to be a mac user until i started college, long story short got a MBA and love it to death but i still need to install windows in order for my work use, i need your advice on which windows version i should get? the home basic, premium or ultimate? and from reading the post here i see that there is another way to install windows on mba by using VMware, should i use VMware or boot camp to install my windows and any suggestions about what should i do and not do while installing? Thank you so much! mac rules!

    Some advice depends on how much money you have available. As a college student I would think the budget is a little tight.
    I would load Windows XP Home edition, not Vista. The subject of VMware is $ vs convenience. You can load XP under bootcamp for free, but you have to reboot between OSX and Windows sessions. Under VMware you can run both at the same time and switch between them at will, however it'll cost you $60-$80 for the privlige.
    It's much easier to install Windows and VMware if you bought the external Superdrive, however watch out for the "gotcha" that I posted in another thread.
    http://discussions.apple.com/thread.jspa?threadID=1378410&tstart=0
    I use VMware and Windows XP, it's the best of both worlds although I would prefer to drop my windows use all together.
    It's really nice to use SPACES and assign VMware/windows to space 2 and OSX tasks to space 1 and then switch back and forth.
    Hope this helps, CaptFred

  • Which web host company works best with iWeb/macs

    Hi,
    I would like to publish my website using a .com account. Can anyone recomment a web host company that is good and works well with what iWeb publishes???
    Thanks so much!1
    Tara

    I apologize.. I should have done a search on my topic
    instead of posting a new one.
    Getting answers through search is hit or miss depending on what terms you use and how much time and patience you have on your hands. And sometimes it's just easier to ask your question because you might not know how best to search for your answer.
    Don't ever hesitate to start a new thread to ask your questions. That is what this forum is for.

Maybe you are looking for

  • Columns text over multiple pages

    Greetings. I''ve created a two-page word processing document with 2 columns. I would like to be able to type in column 1 until it reaches the end of the page and then have it continue on to column 1 on page 2. Ditto for column 2. I would also like to

  • How to get SM19 Information?

    Hi every body, I need to know information about the status of recording in dynamic configuration tab in SM19. how do we know that the status is active or not? and what table that contains about the status information? Thanks, Yulia

  • No Go Pro Rez

    Ladies & Gentlemen, I installed FCS2 to a clean boot drive and it works very well. I am trying to capture uncompressed 1080i HD-SDI with the Kona LHe to Pro Rez sq and it drops 30-50 % of the frames. I tried 720p and the same thing. My G5 is a 2.3 du

  • Adobe 2.0 digital edition

    I just download this edition for ebooks reading it was working fine at the first time , till i turn off my computer. It stopped working after I turn back on my computer. the window keep pops up says adobe 2.0 digital edition stop working windown is c

  • Can't choose between Video Timeline & Frame Animation?

    Running Photoshop CS6 Extended 64-bit For some reason I cannot choose between Video Timeline & Frame Animation in the Timeline window. I do not know why, I've looked in the Timeline panel options, still nothing. Anybody know why?