Which iMac to purchase...?

I'd like to get an iMac for my 12 year old son to use when he's with me and that I could use as a secondary computer for some unknown task... I was at the Apple Store looking at the 20" models and the entry-level one did not support some games one employee (Genius) mentioned but the more expensive 20" model ($1,499) did support a certain game... Then I was shopping on Amazon and noticed that the previous model (white plastic, MA589LL/A, $977) is also available...
What iMac would you want? Any reason (or benefit) to get the previous version?
Thanks,
Robert

The screen is something you should consider before buying. Early this year I was choosing wich iMac to buy (the white one, the aluminum one) and I decided to buy a 24" aluminum iMac. I have seen some aluminum iMacs and both 20" and 24" have very, very glossy screens. The 24" iMac have much more vivid and bright colors in comparison with the 20" model. Personally, I prefered to buy the new aluminum iMac due to the superior specs compered to the old white one, even though the old iMac had a better screen (at least, I think so). If you bought the old one you'd have a less glossy screen, but also a less powerful configuration.

Similar Messages

Unsure which imac to purchase

I am looking at buying a refurbished imac. The question I have is which one? Is there a big difference between a 2.5 and a 2.7 processor?
How much RAM do I need, how much memory...etc.
I have always had a PC. I work with power point, word, email, some photos, and do a little movie stuff. Beside email that is about it. I am also a lay speaker and i have many sermons saved (many hours) so what size hard drive?
Any suggestions would be appreciated, Mike

Look for the fastest processor with the best graphcs card you can afford. RAM is user upgradable and cheaper from vendors other than Apple. The size of the monitor is important as many people don't have a desk big enough for a 27"

Which iMacs to Avoid Purchasing?

Good Morning - Reading Rod Hagen's post, with attachments, describing failed logic boards due to bad capacitors makes me wonder which iMacs, new or used, are safer to buy. I've had iBooks, eMacs, and now a PowerBook G4 for years, all wonderful machines, and am now looking to buy a used iMac G5. My question is then, based on the long and wide distribution of these bad capacitors, are there specific early iMac models to avoid, or is buying any machine using capacitors a typical gamble? Thanks much.

I would suggest avoiding the first two models, the Rev A and the Ambient Light. The iSight model should be fine it seems to have many fewer problems than the first two, but might I suggest buying an intel machine? Even a refurb intel iMac has a history of fewer problems than the G5s and it will come with a warranty, you can also buy Apple Care to extend that warranty.

I do a lot of CAD work and 3D modelling on my aging HP. Which iMac would best suit?

I do a lot of CAD work and 3D modelling, (Sketchup), on my aging HP. Which iMac would best suit my needs ?

I agree with RRFS.
If you can afford it, Custom spec out and purchase the best components for your iMac.
Custom order the fastest i7 CPU, custom GPU (if you can afford it order the 2 GB VRAM GPU, otherwise get the 1 GB VRAM GPU), add the custom largest SSD.
Purchase 16 GBs of RAM or more (the new iMacs can take up to 32 GBs of RAM) from online memory suppliers like Crucial memory or OWC. They are cheaper to buy RAM from.
iMacs are not designed and are not user upgradeable for components other than RAM.
Purchasd the best you can afford now as it will be much harder to get what you really needed later.
Also, I highly recommend with whatever iMac purchase you make, you budget for 3-year extended AppleCare.
iMacs have, somewhat, a regular component failure history. I believe that these failures are due to how much warmer iMacs run than anything else. Purchasing and having extended AppleCare will give you peace of mind and free warranty service for three years.
Good Luck on whatever you decide.

Which imac should i choose?

I have the option between 2 imacs, and i would really like some opinions on which one to purchase, both prices for both imacs are the same. (About $1700) I'm a college student, who uses final cut pro a lot for videos, and i am also a gamer, so i will be playing games on my mac as well.
Option 1:
* The standard 21 inch 2.9 GHZ, Nvidea Geforce GT 750m, with ONE of the following: a Fusion Drive, 16G Ram, or the i7 Processor. ( I cant afford all 3, so if this is a better option, please tell me which one i should choose)
Option 2:
* The 27 inch, 3.2 GHZ, Nvidea Geforce GT 675m.
To sum it up, option one has a better Nvidea, and i can choose one of the 3 accesories, while option 2 is a larger screen, and a higher GHZ.
Im guessing option one is better?

Hello,
My personal choice would be option 2.
You can purchase extra ram from a reputable supplier far cheaper than adding it to your order, I have just 10 minutes ago upgraded my 8gb to 16gb for £70.00. It is very easy to do.
Option 1 no user upgrade possible.
RAM over CPU speed every time for me.
27' loads of screen to work with.
Conclusion: Buy base 27" and spend you money on third party ram, do not forget to factor in the cost of a backup harddrive.
hope this helps.
David

Which imac shall I buy ??

Which imac shall I buy ??
Uses include word processing and spreadsheets, light use of logic, some gaming and bootcamp. I will be getting it on finance over four years so want it to be future proof beyond this time . Thanks

The iMac refresh usually comes toward the end of the end.
No one knows exactly when, though.
Something better, faster, cheaper is always around the corner.
Buy what you need/want now.
It isn't suddenly going to go obsolete.
Budget and save to be able to purchase and register for the extended AppleCare plan before your free one year of service ends. This will extend the warranty repairs out to another two years.
I highly advise doing this as iMacs have a long and uneven reliability history, IMO.

Which iMac to buy?

I run my own small graphic design company and I'm currently running a Mac Pro and an employee is using a MacBook Pro. Both are running the necessary apps fine (CS3, Aperture, Final Cut Express etc.). I'm thinking about getting a desktop for my employee but budget is tight so I'm thinking about an iMac rather than another Mac Pro.
So which iMac do I need? The system requirements for the software suggest the lower spec 20inch iMac would be OK (maybe with a RAM upgrade) but would I be better to get a higher processor speed and a better graphics card with the 24inch iMac? Money is tight so I don't want to buy something more expensive than necessary but I also don't want to spend less and then find it's sluggish or just doesn't work at all.
Any ideas?

Hi Jon,
Just my 2 cents here. I purchased the 20" 2.66GHz but upgraded to 2GB RAM this past November. I use Final Cut Express and Aperture but not as a professional. But if I were looking to do this on a professional level, I would have purchased the 24" instead and definitely upgraded to 4GB of RAM.
I would most likely have upgraded processor speed, I think 2.93 is next, then 3.06. As the software technology changes, so do the requirements for their use. I think spending the extra $$ now would be an investment in the future for you. Just my 2 cents.
Another way to receive feedback or just search the forums is to go here to the FCE forum http://discussions.apple.com/forum.jspa?forumID=936 and the Aperture forums here http://discussions.apple.com/category.jspa?categoryID=184
Carolyn

Which Imac would be better for gaming?

So i've got a choice between these two models -
£1329.60
3.1GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
TB Serial ATA Drive @ 5400 rpm
8gb Ram
NVIDIA GeForce GT 750M 1GB GDDR5
Apple care
27 inch model
3.2GHz quad-core Intel Core i5
Turbo Boost up to 3.6GHz
8GB (two 4GB) memory
1TB hard drive1
NVIDIA GeForce GT 755M with 1GB video memory
Apple care
£1407.60
Basically, the decision is down to, do I want a slightly better graphics card and bigger screen, or a smaller screen and better processer?
I just want to gauge opinions, i'll be using it as my day to day computer as well, some video editing, but nothing too strenuous. How big is the difference in graphic and processing powers.
Thanks for your help

With all due respect the question was "which iMac would be better for gaming?". Key word here is 'better', not 'perfect', not 'ideal'; just 'better'. Unqualified answers and/or sweeping statements do very little to contribute to a discussion, let alone answer the question under consideration.

My app store won't allow me to download any apps because of pervious purchase which I never purchased ?

My app store won't allow me to download any apps because of pervious purchase which I never purchased ?

I'm sure you purchased it since no one else would have your password to download apps
Make sure your CC has funds on it and its up to date on your itunes store account.

Generated a report which gives PR(Purchase Requisition) analysis using ALV.

hi experts,
please give me tables and fields for following report, and also exlain me briefly,
Generated a report which gives PR(Purchase Requisition) analysis using ALV.
thanks in advance,
radhakrishna

Hi
please find this report which link SO PO PR and Prd Ord and there status.
>
REPORT z_so_info.
TABLES: vbak, vbap, afko, afpo.
*Field catalog
TYPE-POOLS: slis.
DATA: lv_repid TYPE sy-repid VALUE sy-repid,
xfield TYPE slis_t_fieldcat_alv,
afield TYPE slis_fieldcat_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(25) text-002.
SELECT-OPTIONS: so_so FOR vbak-vbeln OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-003.
PARAMETERS:
p_kunnr LIKE vbak-kunnr, " sold-to
p_kunwe LIKE vbak-kunnr. " ship-to
SELECTION-SCREEN END OF BLOCK b2.
*Constants
CONSTANTS: c_zor TYPE vbak-auart VALUE 'ZOR',
c_we TYPE vbpa-parvw VALUE 'WE',
c_ag TYPE vbpa-parvw VALUE 'AG'.
c_space TYPE space.
*Ranges
RANGES: ra_parvw FOR vbpa-parvw,
ra_kunnr FOR vbpa-kunnr.
*Tables
DATA: BEGIN OF gt_output OCCURS 0,
vbeln LIKE vbak-vbeln, " sales order number
posnr LIKE vbap-posnr, " SO item number
matnr LIKE vbap-matnr, " material number
sh LIKE vbpa-kunnr, " Ship-to
sp LIKE vbpa-kunnr, " Sold-to
lifnr LIKE ekko-lifnr, " Vendor
bstnk LIKE vbak-bstnk, " PO number
banfn LIKE vbep-banfn, " Purchase requi
po_st TYPE char30, " PO status text
pstyv TYPE vbap-pstyv, " Item catagory
aufnr LIKE afpo-aufnr, " Production Order
prd_stat TYPE string, " Prd order status
END OF gt_output.
DATA: wa_output LIKE gt_output.
FIELD-SYMBOLS: <fs_output> LIKE gt_output.
*Table for sales order and PO
TYPES : BEGIN OF gs_data,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
pstyv TYPE vbap-pstyv,
matnr TYPE vbap-matnr,
END OF gs_data.
DATA: gt_data TYPE STANDARD TABLE OF gs_data,
wa_data TYPE gs_data.
*Table for Production Orders
TYPES: BEGIN OF gs_prd,
aufnr TYPE afpo-aufnr,
posnr TYPE afpo-posnr,
kdauf TYPE afpo-kdauf,
kdpos TYPE afpo-kdpos,
wepos TYPE afpo-wepos, "Goods Receipt Indicator
elikz TYPE afpo-elikz, "Delivery Completed Indicator
objnr TYPE aufk-objnr, "Object number
getri TYPE afko-getri, "Confirmed Order Finish Date
gltri TYPE afko-gltri, "Actual finish date
END OF gs_prd.
DATA: gt_prd TYPE STANDARD TABLE OF gs_prd,
wa_prd TYPE gs_prd.
*Table for partner data
TYPES: BEGIN OF gs_partner,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
parvw TYPE vbpa-parvw,
kunnr TYPE vbpa-kunnr,
END OF gs_partner.
DATA: gt_partner TYPE STANDARD TABLE OF gs_partner,
wa_partner TYPE gs_partner.
TYPES: BEGIN OF gs_po,
ebeln TYPE ekkn-ebeln,
ebelp TYPE ekkn-ebelp,
vbeln TYPE ekkn-vbeln,
vbelp TYPE ekkn-vbelp,
END OF gs_po.
DATA: gt_po TYPE STANDARD TABLE OF gs_po,
wa_po TYPE gs_po.
TYPES: BEGIN OF gs_preq,
vbeln TYPE vbep-vbeln,
posnr TYPE vbep-posnr,
banfn TYPE vbep-banfn,
END OF gs_preq.
DATA: gt_preq TYPE STANDARD TABLE OF gs_preq,
wa_preq TYPE gs_preq.
TYPES: BEGIN OF gs_po_stat,
ebeln TYPE ekko-ebeln,
procstat TYPE ekko-procstat,
lifnr TYPE ekko-lifnr,
END OF gs_po_stat.
DATA: gt_po_stat TYPE STANDARD TABLE OF gs_po_stat,
wa_po_stat TYPE gs_po_stat.
*Field symbols
FIELD-SYMBOLS: <fs> TYPE tj02t-txt04,
<fs_temp> TYPE tj02t-txt04,
<fs_stat> TYPE char30.
START-OF-SELECTION.
PERFORM fr_build_range.
PERFORM fr_get_data.
PERFORM fr_build_fc.
PERFORM fr_output.
*& Form fr_get_data
text
--> p1 text
<-- p2 text
FORM fr_get_data.
*Get SO
SELECT avbeln aposnr apstyv amatnr
FROM vbap AS a
JOIN vbak AS b
ON avbeln = bvbeln
JOIN vbpa AS c
ON bvbeln = cvbeln
INTO TABLE gt_data
WHERE b~vbeln IN so_so
AND b~auart EQ c_zor "Only Sales Orders
AND c~kunnr IN ra_kunnr. "from selection screen
DELETE ADJACENT DUPLICATES FROM gt_data COMPARING vbeln posnr.
*get data of the production order
IF NOT gt_data[] IS INITIAL.
SELECT aaufnr aposnr akdauf akdpos awepos aelikz
b~objnr
FROM afpo AS a
JOIN aufk AS b
ON aaufnr = baufnr
INTO TABLE gt_prd
FOR ALL ENTRIES IN gt_data
WHERE a~kdauf EQ gt_data-vbeln
AND a~kdpos EQ gt_data-posnr.
ENDIF.
*Get partner data
IF NOT gt_data[] IS INITIAL.
SELECT vbeln posnr parvw kunnr
FROM vbpa
INTO TABLE gt_partner
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln.
ENDIF.
*Get Purchase Order
IF NOT gt_data[] IS INITIAL.
SELECT ebeln ebelp vbeln vbelp
FROM ekkn
INTO TABLE gt_po
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln
AND vbelp EQ gt_data-posnr.
SELECT vbeln posnr banfn
FROM vbep
INTO TABLE gt_preq
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln
AND posnr EQ gt_data-posnr.
ENDIF.
IF NOT gt_po[] IS INITIAL.
SELECT aebeln aprocstat a~lifnr
FROM ekko AS a
JOIN ekpo AS b
ON aebeln = bebeln
INTO TABLE gt_po_stat
FOR ALL ENTRIES IN gt_po
WHERE b~ebeln EQ gt_po-ebeln
AND b~ebelp EQ gt_po-ebelp.
ENDIF.
*Move data to output table
LOOP AT gt_data INTO wa_data.
wa_output-vbeln = wa_data-vbeln.
wa_output-posnr = wa_data-posnr.
wa_output-pstyv = wa_data-pstyv.
wa_output-matnr = wa_data-matnr.
READ TABLE gt_po INTO wa_po WITH KEY vbeln = wa_data-vbeln
vbelp = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-bstnk = wa_po-ebeln.
READ TABLE gt_po_stat INTO wa_po_stat WITH KEY ebeln = wa_po-ebeln.
IF sy-subrc EQ 0.
wa_output-lifnr = wa_po_stat-lifnr.
CASE wa_po_stat-procstat.
WHEN '01'.
wa_output-po_st = 'Version in process'.
WHEN '02'.
wa_output-po_st = 'Active'.
WHEN '03'.
wa_output-po_st = 'In release'.
WHEN '04'.
wa_output-po_st = 'Partially released'.
WHEN '05'.
wa_output-po_st = 'Released Completely'.
WHEN '08'.
wa_output-po_st = 'Rejected'.
ENDCASE.
ENDIF. "inner read subrc
ENDIF. "outer read subrc
READ TABLE gt_preq INTO wa_preq WITH KEY vbeln = wa_data-vbeln
posnr = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-banfn = wa_preq-banfn.
ENDIF.
READ TABLE gt_prd INTO wa_prd WITH KEY kdauf = wa_data-vbeln
kdpos = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-aufnr = wa_prd-aufnr.
*get the purchase requisition for production order as well
SELECT SINGLE banfn
FROM ebkn
INTO wa_output-banfn
WHERE aufnr EQ wa_prd-aufnr.
*Get the status of the production order
PERFORM fr_get_prd_stat USING wa_prd-objnr
CHANGING wa_output-prd_stat.
ENDIF. " sy-subrc
READ TABLE gt_partner INTO wa_partner WITH KEY vbeln = wa_data-vbeln
parvw = c_we.
IF sy-subrc EQ 0.
wa_output-sh = wa_partner-kunnr.
ENDIF.
READ TABLE gt_partner INTO wa_partner WITH KEY vbeln = wa_data-vbeln
parvw = c_ag.
IF sy-subrc EQ 0.
wa_output-sp = wa_partner-kunnr.
ENDIF.
APPEND wa_output TO gt_output.
CLEAR: wa_data, wa_prd,wa_partner,wa_output.
ENDLOOP.
ENDFORM. " fr_get_data
*& Form fr_build_range
text
--> p1 text
<-- p2 text
FORM fr_build_range .
*Range for partner function
MOVE 'I' TO ra_parvw-sign.
MOVE 'EQ' TO ra_parvw-option.
MOVE 'SH' TO ra_parvw-low. " we
APPEND ra_parvw.
CLEAR ra_parvw.
MOVE 'I' TO ra_parvw-sign.
MOVE 'EQ' TO ra_parvw-option.
MOVE 'SP' TO ra_parvw-low. " ag
APPEND ra_parvw.
CLEAR ra_parvw.
*Range for ship-to and sold-to
MOVE 'I' TO ra_kunnr-sign.
MOVE 'EQ' TO ra_kunnr-option.
MOVE p_kunnr TO ra_kunnr-low.
APPEND ra_kunnr.
CLEAR ra_kunnr.
MOVE 'I' TO ra_kunnr-sign.
MOVE 'EQ' TO ra_kunnr-option.
MOVE p_kunwe TO ra_kunnr-low.
APPEND ra_kunnr.
CLEAR ra_kunnr.
ENDFORM. " fr_build_range
*& Form fr_build_fc
text
--> p1 text
<-- p2 text
FORM fr_build_fc .
sales order number
afield-fieldname = 'VBELN'.
afield-seltext_s = 'Sales #'.
afield-ref_tabname = 'VBAK'.
APPEND afield TO xfield. CLEAR afield.
sales ITEM number
afield-fieldname = 'POSNR'.
afield-seltext_s = 'Item #'.
afield-ref_tabname = 'VBAP'.
APPEND afield TO xfield. CLEAR afield.
Material Number
afield-fieldname = 'MATNR'.
afield-seltext_s = 'Material #'.
afield-ref_tabname = 'VBAP'.
afield-outputlen = 10.
APPEND afield TO xfield. CLEAR afield.
*Vendor Number
afield-fieldname = 'LIFNR'.
afield-seltext_s = 'Vendor Num.'.
afield-ref_tabname = 'EKKO'.
APPEND afield TO xfield. CLEAR afield.
ship-to-party
afield-fieldname = 'SH'.
afield-seltext_s = 'Ship-to'.
afield-ref_tabname = 'VBPA'.
APPEND afield TO xfield. CLEAR afield.
sold-to-party
afield-fieldname = 'SP'.
afield-seltext_s = 'Sold-to'.
afield-ref_tabname = 'VBPA'.
APPEND afield TO xfield. CLEAR afield.
*PO number
afield-fieldname = 'BSTNK'.
afield-seltext_s = 'PO NUM'.
afield-ref_tabname = 'EKKO'.
APPEND afield TO xfield. CLEAR afield.
*PO status
afield-fieldname = 'PO_STAT'.
afield-seltext_s = 'Step'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
*PO step status
afield-fieldname = 'PO_ST'.
afield-seltext_s = 'PO.Status'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
*Purchase requisition
afield-fieldname = 'BANFN'.
afield-seltext_s = 'Pur. Req.'.
afield-ref_tabname = 'VBEP'.
APPEND afield TO xfield. CLEAR afield.
*Item catagory
afield-fieldname = 'PSTYV'.
afield-seltext_s = 'Itm. Catg'.
afield-ref_tabname = 'VBAP'.
APPEND afield TO xfield. CLEAR afield.
*Prodcution Order number
afield-fieldname = 'AUFNR'.
afield-seltext_m = 'Prod.Order'.
afield-ref_tabname = 'AFKO'.
APPEND afield TO xfield. CLEAR afield.
*PRODCUTION status
afield-fieldname = 'PRD_STAT'.
afield-seltext_s = 'Prd. Step'.
afield-ref_tabname = 'zbacklog_v2'.
afield-outputlen = 20.
APPEND afield TO xfield. CLEAR afield.
*PRODUCTION step status
afield-fieldname = 'PRD_ST'.
afield-seltext_s = 'Prd. Status'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
ENDFORM. " fr_build_fc
*& Form fr_output
text
--> p1 text
<-- p2 text
FORM fr_output .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT =
it_fieldcat = xfield[]
i_default = 'X'
i_save = 'A'
TABLES
t_outtab = gt_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " fr_output
*& Form fr_get_prd_stat
text
-->P_WA_PRD_OBJNR text
FORM fr_get_prd_stat USING p_objnr CHANGING p_prd_stat.
DATA: lt_status TYPE STANDARD TABLE OF jstat,
wa_status TYPE jstat,
lv_status TYPE tj02t-txt04,
lv_temp2 TYPE char5,
lv_buff TYPE string.
CALL FUNCTION 'STATUS_READ'
EXPORTING
client = sy-mandt
objnr = p_objnr
only_active = 'X'
TABLES
status = lt_status
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
LOOP AT lt_status INTO wa_status.
IF wa_status-stat(1) EQ 'I'.
SELECT txt04 FROM tj02t
INTO lv_status
WHERE istat EQ wa_status-stat
AND spras EQ 'E'.
ENDSELECT.
lv_temp2 = lv_status.
CONCATENATE lv_temp2 p_prd_stat INTO p_prd_stat
SEPARATED BY ','.
ENDIF.
CLEAR: wa_status, lv_status, lv_temp2.
ENDLOOP.
lv_buff = p_prd_stat.
*Status of Production Order
IF lv_buff CS 'CRTD'.
p_prd_stat = 'Not Active'.
ENDIF.
IF lv_buff CS 'REL'.
IF lv_buff CS 'GMPS'.
p_prd_stat = 'Printed In Prod'.
ELSE.
p_prd_stat = 'Printed'.
ENDIF.
ENDIF.
IF lv_buff CS 'TECO'.
p_prd_stat = 'Technically Compt.'.
ENDIF.
ENDFORM. " fr_get_prd_stat
>

Developed a report which gives PO(Purchase Order) Pricing details.

hi experts,
please give me tables and fields for following report, and also exlain me briefly,
Developed a report which gives PO(Purchase Order) Pricing details.
thanks in advance,
radhakrishna

Hello Radhakrishna,
you can use the function module
      CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
        EXPORTING
          comm_head_i       = wa_komk
     LANGUAGE          = ' '
   IMPORTING
     COMM_HEAD_E       =
     COMM_MWSKZ        =
        TABLES
          tkomv             = gi_komv
          tkomvd            = gi_komvd.
in wa_komk pass the condition record number.
this you will get from your vbak table
reward points if helpful

How can I tell which apps were purchased on my account?

I did search for answers but couldn't find one that fit.
I have an iPhone and so does our son.
Early on my son purchased apps on my account and downloaded them on HIS iphone. Eventually, I got him his own iPhone account and so he has also purchsed apps on his own account and downloaded them on his phone.
When we open iTunes and connect his phone, there is a list of apps that are on his phone.
QUESTION
How can we tell which apps were purchased on HIS iTunes acct and which were purchased on MY iTunes acct?
I don't want to DO anything with the apps, I just want to know one from another.
Thanks in advance!!

List of authorized computers - https://discussions.apple.com/thread/4090165 - there isn't one.

Which imac would work best for Graphic Design?

I am a Graphic Designer, currently using Creative Suite 2 (soon to be upgraded to CS3) and I need a new Mac for home. A Powermac takes up too much space, so I'm thinking about an imac with a 24" monitor and I have a few questions for the experts:)
Which imac would work best for graphics?
Is the monitor acurate for Pantone color matching?
Is the 24"monitor on the imac clear and bright?
Is Leopard a stable OS?
I also need an (inexpensive) color laser printer. Any suggestions?
Thanks a bunch!
Suzi (Machead since the beginning of Mac history)

Hello and Welcome to Apple Discussions.
The 24" iMac uses a superior LCD panel to the 20" model and so is certainly better suited to your purposes. I don't know how badly having a piece of glass in front of the display would affect you as a designer though.
The display certainly is clear and bright. I use it on it's lowest brightness setting.
Leopard is stable but it's worth checking that drivers for any devices that you currently rely on are available. For example I have to go back to my 10.4.11 iMac G4 to use my scanner. Personally I can't get iCal to alarm in Leopard but that's a fairly minor gripe.
As this is the forum for much older iMacs I'd suggest re-posting in the Intel iMac forum and even Mac OS 10.5 Printing forums for better informed opinion:
<hr width="200">
G4 (aka Flat Panel): Intel:
Click image to go to correct forum.
cheers
mrtotes

A report which shows the purchase order MM and the linked vendor invoice

Hi All,
I wonder if ther's a SAP standard report which shows the purchase order MM and the linked vendor invoice (the FI document) with the Net due date.
Could anyone help me?
Thanks
G.Rossi

Hi,
ME80FN with PO History View
ME2N with Scope of List "ALLES"

How can I upload mp3s from IPHONE which were not purchased at ITUNE store to iCloud?

I want to upload mp3s which were not purchased at iTune store to iCloud. These MP3s are in IPHONE now. Can I use iCloud this way?

You need to subscribe to iTunes Match, $25.

Which iMac to purchase...?

Similar Messages

Maybe you are looking for