Which interface for documents for process manufacturing for chem industry?
Hi,
My partner is looking for a technical contact who could help him in finding the right integration to manage technical documentation for process manufacturing in the chemical industry.
Not sure if this is the right forum but any advice would be appreciated.
Thanks, Seher
Hello Seher,
as there are several ways in SAP to manage documents I need som emore information to give you a reliable answer:
What is the process you want to support, what do you want to do with the documents?
Do these technical documents have a lifecycle?
What are the requirements to "manage technical documentation"?
What do you mean with "integration"? E.g.: Do you want to link a document to an SAP object?
Where are the documents today, file server?
Best regards,
Michael
Similar Messages
-
Program name for E-mail processing routines for o/p type NEU
Hi Friends ,
What is the program name for E-mail processing routines for o/p type NEU for purchase order . This i want use this for send PO for vendor .
RBHi
Program SAPFM06P
Form Routine ENTRY_NEU
Form MEDRUCK
Transmission Medium - External Send -
Required report for the invoice processed twice for the same PO & Vendor
Hi SAP MM experts,
I want a report which is to identify the same invoice processed twice against the same vendor and same PO which system cannot detect only because the invoice numbers are manually entered slightly different, and that is why I also want to include the document date of the invoice so that the possibility of identifying the duplicated invoices is increased.
Any help will be highly appriciated.
Thaks in advance
Sachin PatilYou might also refer reports ME80RN,ME2N,ME2L for purchase order or refer report MIR5 for vendor.
Also refer report FBL1N - vendor open items,Check for document type - 'RE'
Whether check for double invoice is ticked accounting view of vendor master ? or else
Check double invoice is configired for which combination in LIV SPRO ? -
Help required for Creation of process chain for Open hub destination(table)
Hi Experts,
I am working on creating process chain for the open hub destination which is targeting data transfer into Table. Which is then push to SAP PI.
2.) Steps to create a process chain for OHD????? Not knowing and even after that
3.) What are the steps for Pushing it to PI (I mean we have generated client proxy also) But need to know ABAP related to trigger process chain
please need your expertise and knowledge. Well atleast with the point 2 I need BI experts help...
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]Hi Gaurav,
Creating Process chain for OHD.
1. Go to RSPC-> Create a astart variant.
2. Click on process typesin the menu. Fourth from the left. Under this go to LOAD PROCESSES AND POST PROCESSING option.
3. The fifth option is "DATA EXPORT INTO EXTERNAL SYSTEMS". Click on that.
4. Click on F4 and choose your infospoke name.
5. Press the RIGHT button.(if it asks for variant, create a new variant in the same small window besideswritting bar).
6. Join the START process and the 2nd process via dragging.
7. Now add your required other processes.
The general process chain processes are :
1. Start.
2. Delete Indexes (if data loaded to cube).
3. Load process.
4. Delete duplicate request (if it is a full load in cube).
5. Create Indexes.
Hope it helps.
Preet -
Error in open_form for document in ME21n Transaction for pring preview
Hi,
While creating a PO using ME21N. Ifi click on Print Preview Button,the following error is coming "<b>Error in OPEN_FORM for document *********** "</b>This PO output type is "Fax".
This only happens for output type "Fax". For Output type "Print", preview works fine.
Same program is used for fax and print in configuration(NACE).
Please help me out in this.
Regards,
KishoreHi Krishna,
It is possible to check the print preview of the document with FAX as output.
Please put a break-point in your progarm and check it. -
Can anyone recommend a document word processing App for new ipad?
Can anyone recommend an App for word processing for the new ipad? I was hoping to be able to use the dictation function to save some time. Cloudon, evernote...anything better?
There are word processing apps such as Apple's Pages and from third-parties apps such as Documents To Go and QuickOffice Pro HD.
-
Content server for Document attachment through "services for object" Icon.
Guys,
I have typical problem in installation of Content server for storing external documents.
We all know that we can attach the document in SAP using the icon SERVICES FOR OBJECT. By this we can attach the document to the specific object we want.
-Since my client wants only document attachment method not to completely implement SAP DMS, I proposed this method of attaching documents through services for object method.
-If documents are stored though services for object ,The attached document will directly get stored in sap database(correct me if I am wrong) while in DMS it ask you to select the storage location while u check in for any document
-By storing the doc thru "services for object " For long run when we store the documents in sap database our system will drastically get slow down.
-In this regard I have a plan to incorporate external storage server.
-Now I should know that how I should customize content server configuration so that the attachment through services for object will store into this content server I need to know how to define Client, Content Category, Content Repository, Document Area, Physical Machine, IP Address, Port. (OACT & OAC0)
I appreciate for immediate solution and <u><b>Points will be rewarded for sure.</b></u>
Regards,
Murali.SHi Murali,
Don't Worry, its possible,
All attachments can be stored in SAP Content Server also, but through archiving process.
Set up a database storage system.
Preparation
Make sure that the HTTP plugin is active.
Transaction <b>SMICM,</b> "Display Services" function key (shift F1)). The list of services must contain a port other than 0 for HTTP.If not, you must adjust the relevant profile parameter.
<u>Typical entry:</u>
icm/server_port_0 PROT=HTTP, PORT=1080, TIMEOUT=900
<b>Make sure that the /sap/bc/contentserver service is active.</b>
If no user is defined, then use transaction SU01 to create a new user. Use the "System" user type.Assign
the SAP_ALL and SAP_NEW profiles to the user. (Eg: HRUSER/PLMUSER/PPUSER etc)
Transaction <b>SICF,</b> select: default_host - sap - bc -contentserver. Select the function to display/change the service. Make sure that a user is defined.
Using the relevant data from the newly created user, maintain the anonymous logon data for the
/default_host/sap/bc/ service and save & activate the changes in transaction <b>SICF</b>. Double click on content server and give the user name which has been created (HRUSER/PLMUSER/PPUSER/MMUSER etc)
Check the system PSE.
Start transaction <b>STRUST</b>. Expand the system PSE. The system PSE must be "green" for each application
server.
Determine a suitable exchange directory.
The exchange directory must be accessible from each application server. If all application servers are running on the same platform (for example, Windows), one network directory that is accessible on all application server (for example,
server\share) is sufficient. You can generally use the global directory
(profile parameter DIR_GLOBAL).You can use the RSPARAM report to determine the profile parameters.
Setting up the storage
Create a table for storing the data. Using transaction <b>SE11</b>, create a copy of the SDOKCONT1
table. If you want to create the repository database, you can name the table ZCONT_DB, for example. Save the
table as a local object. Activate the table.
Create a repository.
Use transaction <b>OAC0</b> to create a new repository.
Use the following parameters:
Repository Max. two characters, for example, Z1
DocArea: ARCHLINK
Storage type: R/3 database
Storage subtype: normal
Version no. : 0046
Contents table <table name> for example: ZCONT_DB
Exchange directory <directory name> for example:
server\share\
Make sure that the exchange list ends with a \ (or /on Unix).If you are using a variety of platforms, you must use transaction FILE to define a suitable logical file name and use this name. Save the settings.
1. Maintain view table <b>TOAAR_C</b>, via SM31
Cross client table displayed as information, forget it
2. In field 'StSytm' you must entered 'Z1' as your system need, or anything that you need but you must configure HR Archive link too.
3. In field 'Arch.path' (direct above Spoolpath), entered path in your system, this real path in your operating system. May be you should confirm to your Basis consultant where exactly you could store picture files. So if you enter '/', your file exists at root directory at your UNIX system.
4. Choose 'File store' radio button
5. Save.
First
<b>1. You have to create a number range for SAP ArchiveLink.
IMG: Basis Components-> Basis Services -> SAP ArchiveLink -> Basic Settings-> Maintain number ranges
(Trxn <b>OANR).</b> Create number range 01 from 0000000001 to 9999999999 without the external number flag.
2. Document type <b>HRICOLFOTO</b> must exist with document class JPG.
IMG: Basis Components->Basis Services->SAP ArchiveLink->System Settings->Maintain document types
(Table<b> TOAVE, Trxn OAC2).</b>
3. Document type <b>HRICOLFOTO</b> must be linked to object type PREL and Infotype PA0002.
IMG: Personnel Management->Personnel Administration->Tools->Optical archiving->Set up Optical Archiving
in HR. (View V_T585O, no Trxn). In the first two columns there are minuses, the third (Date) has
a plus - don't put a flag in the check box.
4. Check which content repository (Archive) is linked to document type HRICOLFOTO and object type
PREL. IMG: <b>Basis Components->Basis Services->SAP ArchiveLink->Basic Settings->Maintain Links (Table
TOAOM_C, Trxn).</b></b>
Test
Test the repository.
Use transaction SE38 to start the RSCMSTH0 report. Specify your repository (i.e. Z1) and start the test.
The report must run without errors. If no problems occurred, you can use the new repository with Archive Link after you carry out the Archive Link Customizing. If problems do occur, check whether one of the related
notes helps.
For More Details :
http://service.sap.com/archivelink.
<u><b>
NOTE:- Screen Shots are missing, i was not able to paste here, One more thing is we did this for uploading a PHOTOS into Content Server, Similarly you have to create a REPOSITORY and Z-TABLE to bring all the Attachments from all the selected Objects and then route them to the CONTENT REPOSITORY.</b></u>
Your Senior ABAP guy would help you in this, if not i may try to help you more by monday.
Regards
Rehman
<b>Reward Your Points if Satisfied.</b> -
What's needed for a PDF processing module for InDesign Server?
Hello,
After digging through lots of documentation and whitepapers, I am still puzzled about what would be an efficient way to implement a software module that handles some specific processing tasks of PDF output (automatically generated in InDesign Server and targeted for various types of print configurations from small-run LFP up to very high volume commercial printing).
We have a working standalone script that uses Acrobat's preflight and correction functions, and now we would like to port and integrate this into a server-based workflow. Apparently, there is no Acrobat Server product available. Distiller Server does exist, but seems to be limited to converting PostScript to PDF without the PDF-to-PDF processing features we need. Some of the functionality that is typically found in RIPs (e.g. converting colours to a preset output intent with highly configurable options [for pixel/vector elements, black and spot colour ink issues etc.] and flattening native transparency) could probably be implemented using the Adobe PDF Print Engine, but this seems a bit overkill and would probably require extensive programming from scratch. I suspect there should be a smarter way to use existing software – but which? I am not yet familiar with InDesign Server; does its SDK permit full access to the same parts/functions of the PDF library that Acrobat uses for its preflight and correction features?
Any help is welcome.
EricGordon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Is there rotation lock for documents in Adobe Reader for iOS?
I'm using Adobe Reader 10.6 on iOS 6.1.3. My Side Switch is assigned for mute function and thus using it for rotation lock is too complicated.
If you are using the switch for a mute function, then double-click on the home button and swipe right. The button on the left locks the rotation.
-
BR100 Document for Oracle Process Manufacturing (OPM)
Hi,
Can anybody please send me sample BR-100 document for Oracle Process manufacturing for Steel / Coal slag processing industry??
Thanks in advance.
With Regards,
Vishal Gujar
Edited by: 956843 on Dec 14, 2012 12:42 PM11g is not release yet for SOA Suite. The latest version is 10.1.3.4.
here is some docs to get you started
http://www.oracle.com/technology/products/ias/bpel/htdocs/dev_support.html
cheers
James -
Hi,
I want make a validation for document type wise posting for particular users like user ABC only post JV doc.type document. Please suggest me how I will make it.
Thanks & Regards,
Hemant Kumar MauryaHello Hemant,
You can manage this with authorization or validation (T Code OB28 or GGB0), for validation:
1 - Create a validation at document header level.
2 - You can create a set (table BKPF and filed - user name) with T code u2013 GS01 wherein you can give list of users for which you want to restrict posting only with document type u201CJVu201D. Attached this set or a single user in u201CPrerequisiteu201D section of validation.
3 - In u201CChecku201D section of validation validate the document type u201CJVu201D syntax u201CBKPF-BLART <> JVu2019
4 - Create and attach error message for above validation.
5 - Attach this validation to your company code in OB28
Since i donu2019t have SAP log on credential therefore cannot give you exact validation code syntax.
Please try, hopefully this would help.
Regards,
Parag -
Problem with document type on WF for parking document
Hello
Iu2019m actually working on the SAP workflow dealing with the FIPP object and the event u201Ccreatedu201D (FI park document transaction (FV60)).
The problem is that the WF is launched for all document types wich is not the need of the customer. Iu2019m looking for a solution to launch the WF for some specific document types.
Iu2019ve already tried to use the workflow variant, approval groups, paths and procedure with no success. (SPRO -> financial accouting-> accounts receivable and accounts payable -> business transaction -> incoming credit invoice memo -> make and check setting for document parking)
Thank you for help.
SLHere is the solution I have eventually found :
1- Application of the OSS note 559276 which enables the customizing of the workflow variant (the transaction OBWD becomes here effective)
2- Assignment of the documents types, workflow variants and release approval groups with the transaction OBWD.
Therefore, the document types that are not defined in the transaction OBWD will not require validation (no workflow will be launched).
SL -
You can only assigned two originals for document type DRW
hello,
while going for cv02n in PM ,when i try to attached more than two documents its shows me an error saying that
You can only assigned two originals for document type DRW
but i want to attach more document at same time.
kiran.hey ....thanks
Iring
but when i try to it by this way ,the setting for vault under which the file has to check-in
is coming in that list but it shows the error saying that You are not authorized for activity 52 document type KPR...
when i try to do it under DRW it is allowing me to check in only for 2 documents when i try to attach 3 rd file it gives me an
error
You can only assigned two originals for document type DRW
waiting for your reply
kiran. -
Authorization control for document status
Dear All,
I want to control the status change of Documets created,
How can i achieve this, so that a perticular user /ID can change the perticular status,
I have ,
01
02,
03,
04, Rel.
05,
Do i need to put some trace anf find Objects to control...
or there is any standard method to do this..
Please guide me..
Regards
RaghuHi Raghu,
Here are DMS authorizatoins objects. For handle status it should be C_DRAW_STA
C_DRAD_OBJ Create/Change/Display/Delete Object Link
C_DRAW_BGR Authorization for authorization groups
C_DRAW_DOK Authorization for document access
C_DRAW_MUP Authorization for Markups
C_DRAW_STA Authorization for document status
C_DRAW_TCD Authorization for document activities
C_DRAW_TCS Status-Dependent Authorizations for Documents
C_DRZA_TCD Document Distribution: Authorization for Recipient Lists
C_DRZI_TCD Document Distribution: Authorization for Distribution Order
S_ECL_CAT ECL Viewer: Authorization Object for Stamp Categories
S_ECL_STP ECL Viewer: Authorization Object for Printing with Meta Data
S_ECL_STP2 ECL Viewer: Authorization Object for Printing with Meta Data
Hope that it will help you
//Håkan -
Experience Using CE for publishing BPMN Processes for documentation?
Dear all,
has anybody some experience in using the Netweaver CE for publishing BPMN Processes only for documentation purpose? One part of our process pools contains only processes, that will not be used for process automation within CE Applications. We want to do do it this way, because theese processes describes our business on a higher level.You can write a Java program using the BOE SDK that does that. HEre are some examples:
http://wiki.sdn.sap.com/wiki/display/BOBJ/JavaBusinessObjectsEnterpriseSDKSamples
Regards,
Stratos
Maybe you are looking for
-
"You've been signed out" Creative Cloud broken
I don't pay much attention to CC unless I need an app update, today I wanted to update some apps, and I can't sign in to Creative Cloud no matter what I do. I've seen many threads about this, I can see it's an ugly ongoing issue, I tried all suggesti
-
Reg-Round off in sales documents
Dear all I need a solution for given below point. For Purchase and local sales there should option for rounded off on total amount,but incase of export sales roundoff should not effect. Please kindly suggest. Regards M Auditya Functional Consultant
-
Out of box auto deployment fails when trying to set up first DC in new domain
Tried to configure and deploy windows server 2012 R2 essential many times. It's the most simple scenario -- PDC in first domain. However, every time it stuck at around 67% and gave me an error about not able to continue. The group policy list is empt
-
Will Not Charge! Please Help!
I love my Droid, but I have been having problems charging. For days now I have been having trouble keeping the phone charging and I have been leaving it in weird positions just so it would charge. However, today it died (ran out of battery completely
-
I bought photoshop cc and ligtroom cc but i got only the test version
I bought photoshop cc and ligtroom cc but i got only the test Version. How can i Change it?