Which interface to use to run 2 extra screens with a macbook pro 13"

Hi All
Just bought MBP 13" (non retina) and would like to hear about some external monitor solutions in particular which interfaces are used.
Is the USB3 slot best to use with DisplayLink kit or the Thunderbolt and DisplayPort stuff.
My need is to run LogicPro 9 over 3 windows as this will improve my productivity, had been used to just MB White Screen and 1 external VGA Monitor.
Any suggestions would be most welcome...
In anticipation
Shiningheart

Hello, Carl. 
Thank you for visiting Apple Support Communities.
Here is the best resource I could find that gives the best option. 
About Mini DisplayPort to HDMI adapters
http://support.apple.com/kb/HT4241
Cheers,
Jason H. 

Similar Messages

  • I just bought a new iMac and now I am trying to use it as a screen for my Macbook pro, but it don't have a Mini DisplayPort the new model only have Thunderbolt which my Macbook don't have. Is there any way to connect this two mac's anyway??

    I just bought a new iMac and now I amtrying to use it as a screen for my Macbook pro, but it don’t have a MiniDisplayPort the new model only have Thunderbolt which my Macbook don’t have. Isthere any way to connect this two mac’s anyway??

    Screen sharing setup in 10.5, 10.6 are described by the links by operating system.  10.7 is fairly similar to 10.6.
    And if both Macs have Firewire, you can setup a Firewire over IP network for fast communication between machines.  Note if you have two different Firewire ports a 6 pin to 9 pin Firewire cable does exist.  There are no Firewire to USB cables.

  • Can I use Elgato VHS Video Capture with my Macbook pro?

    Can I use Elgato VHS Video Capture with my Macbook Pro? It comes with a CD on which is the software. My Macbook pro does not have a CD drive. how do i get the software?

    Elgato provides a download link to their latest Video Capture software v1.1.5. Supposedly runs on Snow Leopard and later. They recommend Yosemite.

  • Can I use my iMac's remote with my Macbook pro?

    I want to know if you can use your iMac's remote with a MacBook Pro?

    Yes.
    You can use any Apple Remote on any Mac that has an IR reciever.

  • Running two screens from a macbook pro

    How can I run a second screen from my macbook pro.  I run a thunderbolt screen from the thunderbolt port but the port on the thunderbolt screen won't send a signal to the HDMI port (the macbook thunderbolt port sends a signal to the HDTV no problem?

    Hi there bahrain mike,
    You may find the information in the article below helpful.
    OS X: Using multiple displays in Mavericks
    http://support.apple.com/kb/HT5891
    -Griff W. 

  • External screen with new macbook pro 13"

    Hello I've a issue with my new macbook pro 13" (i5,8go,SSD). I have a external 27" monitor yiiama B2776HDS-B1 who was working fine with my macbook pro 13" 2010 running on snow leopard. But with my new one, I've got a black border on each side of the screen with the same resolution (1920x1080) used with my old macbook. My macbook is linked with a vga cable and a apple mini display adaptator.

    The newer MacBook Pros use ThunderBolt which came out after the MacBooks were discontinued. So you might post this question in the MacBook Pro forum for a better chance at an answer. https://discussions.apple.com/community/notebooks/macbook_pro

  • Using a remote desktop connection with the Macbook pro.

    I use the remote desktop connection on the Macbook pro and am unable to exchange info between the mac and the remote connetion windows. For example, if I am writing an email from the remote connection and want to attach a document, photo etc. that I created on the Mac, it just doesn't work. It seems like the Mac and the desktop connection are completely seperated eventhough they are both on the screen in front of me. the systems I use for work are not Apple compatible and will not work on anything other than windows explorer and in my case the remote desk top connection. Any ideas!

    Welcome to Apple Discussions
    Try running in 'ClamShell' mode (MacBook Pro lid closed and using an external keyboard and mouse) with the Gateway connected and then run System Preferences/Displays, it should show then ...
    My 1920x1080 monitor shows the following:

  • HT1338 How do I use a philips PicoPix projecter with my MacBook Pro

    How do I use a philips PicoPix projector with my MacBook Pro

    depends what ports your projector supports. You do not give the exact model.
    The standard way is to use MiniDisplay (AKA Thunderbolt) port on your MacBookPro and use an adapter to
    ideally HDMI or DVI worst solution VGA.
    All depends what the projector has at the back.

  • HT201178 Is it possible to use an Apple wireless keyboard with a MacBook Pro? Sounds odd, I know, but I much prefer typing on a wireless keyboard.

    With a MacBook Pro..is it possible to use an Apple wireless keyboard instead of the keyboard built into the MacBook Pro? I much prefer typing on the wireless keyboard. Thanks

    Hello:
    If the Macbook Pro has Bluetooth built-in, the answer is yes.
    Barry

  • What is the best method of using an iPad as an extra screen for a macbook pro?

    I just received a macbook pro what is the best method for using an ipad as an extra screen for an ipad? Hopeflly, one that is no cost to me.

    Sorry, but are you incapable of looking things up for yourself? Everything that you have asked is easily searchable on the internet.
    I used it over wi-fi.
    http://avatron.com/apps/air-display

  • Can I use a macbook pro 2 screen with a macbook pro 3?

    my girlfriends 2007 macbook pro 3 screen stopped working yesterday so we bought a 2006 macbook pro 2 off craigslist and found out that it wont run mavricks so I was wondering if the screens were backwards compatable, like if I use the screen from the 2 and put it on the 3?
    They are both the same size 15"
    thank you

    You might look at iFixit.com and Powerbookmedic.com and see if the two different MBP displays have the same part number.
    Ciao.

  • Running Mac Mini with a MacBook Pro?

    Is it possible to run a Mac Mini using a MacBook Pro keyboard and display? Essentially using the keyboard and display of the MacBook to run the Mini as a normal desktop setup? I would be looking to use the Mini in Boot camp mode to run Windows and do not want to install Windows on my MacBook. Thanks for any tips.

    You can remotely control most computers via software (generically) called VNC (Virtual Network Computing). The connection between the computers would preferably be via an ethernet cable.
    While this can be easily set up in a Leopard-to-Leopard environment (in Leopard it is called "screen sharing"), it should also be possible in a Leopard (or Tiger) to Windows environment.
    Using VNC, you should not expect the remote computer to be as responsive as using a real keyboard, mouse, and monitor directly connected to it.
    You will also (temporarily) need a real keyboard, mouse, and monitor to configure the Mini initially.

  • Can i run 3 displays with 13" macbook pro retina?

    I need to run 3 external displays from the macbook pro retina.  Does the 13" retina have the capability or would I need to go with the 15" retina which has the Nvidia with 1Gb memory?

    you will need the 15" model

  • Is the level of protection from intrusion, malware, viruses, and trojans materially better when using a Sonicwall TZ 105 with a MacBook Pro with OS X 10.8.5 than with a properly configured MacBook Pro alone?

    One of our IT engineers at work mentioned the security of our home networks could be substantially improved by using a properly configured Sonicwall TZ 105 with the comprehensive security option (sold as a separate item from the Sonicwall hardware). I am interested in the experiences and advice of any MacBook Pro users who have such a device in their home networks. Is the protection the device and the add-on monitoring afford that much greater than that of a properly configured MacBook Pro running OS X 10.8.5, and in general, even if the security provided is significantly greater, is it necessary for the home user or is it overkill?
    Thank you

    One of our IT engineers at work mentioned the security of our home networks could be substantially improved by using a properly configured Sonicwall TZ 105 with the comprehensive security option (sold as a separate item from the Sonicwall hardware). I am interested in the experiences and advice of any MacBook Pro users who have such a device in their home networks. Is the protection the device and the add-on monitoring afford that much greater than that of a properly configured MacBook Pro running OS X 10.8.5, and in general, even if the security provided is significantly greater, is it necessary for the home user or is it overkill?
    Thank you

  • Can I run two displays with my Macbook Pro?

    I have the early 2011 Macbook Pro, with the 256mb ram on the graphics card, and what I think was the first generation "Thunderbolt" video output. I'm currently running a single 27"Cinema Display using a mini-display port adaptor out. I'm wondering if there's a way to drive two monitors with it - say a Thunderbolt display and the current Cinema Display? What configuration of displays, adaptors, and/or cables would I need to do this?
    Thanks!

    I suggest reviewing information here:
    http://support.apple.com/kb/HT5219?viewlocale=en_US&locale=en_US
    in the sections:
    "Using the Apple Thunderbolt Display"  and
    "Using Mini DisplayPort displays or displays connecting with Mini DisplayPort adapters on Macs with Thunderbolt Ports:"

Maybe you are looking for

  • Verizon DSL - High "Speed (down/up)" Low connection rate

    Hello - I am doing this for myin-laws, who live in a semi-rural area.  They have Verizon DSL, and have been having very slow connection speeds for the past few months (they have the 1.5-3 Mbps, and are getting between 200-700 kpbs.  Sometimes, for a

  • HT4628 "The system extension "/System/Library/Extensions/RTL8187BI.kext" was installed improperly

    when updating my system online i receive an error "The system extension "/System/Library/Extensions/RTL8187BI.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update." Please help.

  • Displaying a jsp page in full window

    Hi All,    I have a jsp page in which I have two frames(vertical), in the left frame,I have a link LogOff.When I click on Log off,I want a jsp page with msg(Logged of succcesfully) to be displayed in the whole window.But now it is displaying either i

  • Show Qualification tab

    Dear experts In PPOME, while defining a position in SAP, in ides system, we have a tab which we can enter the qualifications needed for position, but in our development system we can't view this tab. Does anybody knows anything about this problem and

  • RDP Services do not accept connection after cluster failover

    Hi guys, i am having weird behaviour on my Windows Server 2012 R2.  server 1 - 10.100.1.201 server 2   - 10.100.1.203 VIP - 10.100.1.202 when i perform remote desktop session to server 1 and server 2 after both servers are being rebooted, they are wo